| /openbmc/linux/sound/firewire/motu/ |
| H A D | motu-protocol-v1.c | d13d6b28 Wed Jun 16 03:28:46 CDT 2021 Takashi Sakamoto <o-takashi@sakamocchi.jp> ALSA: firewire-motu: add support for MOTU 828
MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This
model consists of three chips:
* Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus)
* Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and
packet processing layer)
* QuickLogic QuickRAM QL4016 (Data block processing layer and digital
signal processing)
This commit adds a support for this model, with its unique protocol as
version 1. The features of this protocol are:
* no MIDI support.
* Rx packets have no data chunks for control and status messages.
* Tx packets have 2 data chunks for control and status messages in the
end of each data block. The chunks consist of data block counter
(4 byte) and message (2 byte).
* All of settings are represented in bit flag in one quadlet address
(0x'ffff'f000'0b00).
* When optical interface is configured as S/PDIF, signals of the interface
is multiplexed for packets, instead of signals of coaxial interface.
* The internal multiplexer is not configured by software.
I note that the device has a quirk to mute output voluntarily during
receiving batch of packets in the beginning of packet streaming. The
operation to unmute should be done by software enough after the device
shifts the state, however it's not deterministic. Furthermore, just
after switching rate of sampling clock, the device keeps the state longer.
This patch manages to sleep 100 msec before unmute operation, but it may
fail to release the mute in the case that the rate is changed. As a
workaround, users can restart packet streaming at the same rate, or write
to specific register from userspace.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04105c54 bus_info_length 4, crc_length 16, crc 23636
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 00005015 device_id 0000005015 | EUI-64 0001f20000005015
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 00035052 directory_length 3, crc 20562
42c 120001f2 specifier id
430 13000001 version
434 17101800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002eeb6 leaf_length 2, crc 61110
43c 0001f200 company_id 0001f2 |
440 00005015 device_id 0000005015 | EUI-64 0001f20000005015
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| H A D | Makefile | d13d6b28 Wed Jun 16 03:28:46 CDT 2021 Takashi Sakamoto <o-takashi@sakamocchi.jp> ALSA: firewire-motu: add support for MOTU 828
MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This
model consists of three chips:
* Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus)
* Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and
packet processing layer)
* QuickLogic QuickRAM QL4016 (Data block processing layer and digital
signal processing)
This commit adds a support for this model, with its unique protocol as
version 1. The features of this protocol are:
* no MIDI support.
* Rx packets have no data chunks for control and status messages.
* Tx packets have 2 data chunks for control and status messages in the
end of each data block. The chunks consist of data block counter
(4 byte) and message (2 byte).
* All of settings are represented in bit flag in one quadlet address
(0x'ffff'f000'0b00).
* When optical interface is configured as S/PDIF, signals of the interface
is multiplexed for packets, instead of signals of coaxial interface.
* The internal multiplexer is not configured by software.
I note that the device has a quirk to mute output voluntarily during
receiving batch of packets in the beginning of packet streaming. The
operation to unmute should be done by software enough after the device
shifts the state, however it's not deterministic. Furthermore, just
after switching rate of sampling clock, the device keeps the state longer.
This patch manages to sleep 100 msec before unmute operation, but it may
fail to release the mute in the case that the rate is changed. As a
workaround, users can restart packet streaming at the same rate, or write
to specific register from userspace.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04105c54 bus_info_length 4, crc_length 16, crc 23636
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 00005015 device_id 0000005015 | EUI-64 0001f20000005015
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 00035052 directory_length 3, crc 20562
42c 120001f2 specifier id
430 13000001 version
434 17101800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002eeb6 leaf_length 2, crc 61110
43c 0001f200 company_id 0001f2 |
440 00005015 device_id 0000005015 | EUI-64 0001f20000005015
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| H A D | motu.h | d13d6b28 Wed Jun 16 03:28:46 CDT 2021 Takashi Sakamoto <o-takashi@sakamocchi.jp> ALSA: firewire-motu: add support for MOTU 828
MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This
model consists of three chips:
* Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus)
* Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and
packet processing layer)
* QuickLogic QuickRAM QL4016 (Data block processing layer and digital
signal processing)
This commit adds a support for this model, with its unique protocol as
version 1. The features of this protocol are:
* no MIDI support.
* Rx packets have no data chunks for control and status messages.
* Tx packets have 2 data chunks for control and status messages in the
end of each data block. The chunks consist of data block counter
(4 byte) and message (2 byte).
* All of settings are represented in bit flag in one quadlet address
(0x'ffff'f000'0b00).
* When optical interface is configured as S/PDIF, signals of the interface
is multiplexed for packets, instead of signals of coaxial interface.
* The internal multiplexer is not configured by software.
I note that the device has a quirk to mute output voluntarily during
receiving batch of packets in the beginning of packet streaming. The
operation to unmute should be done by software enough after the device
shifts the state, however it's not deterministic. Furthermore, just
after switching rate of sampling clock, the device keeps the state longer.
This patch manages to sleep 100 msec before unmute operation, but it may
fail to release the mute in the case that the rate is changed. As a
workaround, users can restart packet streaming at the same rate, or write
to specific register from userspace.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04105c54 bus_info_length 4, crc_length 16, crc 23636
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 00005015 device_id 0000005015 | EUI-64 0001f20000005015
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 00035052 directory_length 3, crc 20562
42c 120001f2 specifier id
430 13000001 version
434 17101800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002eeb6 leaf_length 2, crc 61110
43c 0001f200 company_id 0001f2 |
440 00005015 device_id 0000005015 | EUI-64 0001f20000005015
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| H A D | motu.c | d13d6b28 Wed Jun 16 03:28:46 CDT 2021 Takashi Sakamoto <o-takashi@sakamocchi.jp> ALSA: firewire-motu: add support for MOTU 828
MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This
model consists of three chips:
* Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus)
* Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and
packet processing layer)
* QuickLogic QuickRAM QL4016 (Data block processing layer and digital
signal processing)
This commit adds a support for this model, with its unique protocol as
version 1. The features of this protocol are:
* no MIDI support.
* Rx packets have no data chunks for control and status messages.
* Tx packets have 2 data chunks for control and status messages in the
end of each data block. The chunks consist of data block counter
(4 byte) and message (2 byte).
* All of settings are represented in bit flag in one quadlet address
(0x'ffff'f000'0b00).
* When optical interface is configured as S/PDIF, signals of the interface
is multiplexed for packets, instead of signals of coaxial interface.
* The internal multiplexer is not configured by software.
I note that the device has a quirk to mute output voluntarily during
receiving batch of packets in the beginning of packet streaming. The
operation to unmute should be done by software enough after the device
shifts the state, however it's not deterministic. Furthermore, just
after switching rate of sampling clock, the device keeps the state longer.
This patch manages to sleep 100 msec before unmute operation, but it may
fail to release the mute in the case that the rate is changed. As a
workaround, users can restart packet streaming at the same rate, or write
to specific register from userspace.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04105c54 bus_info_length 4, crc_length 16, crc 23636
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 00005015 device_id 0000005015 | EUI-64 0001f20000005015
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 00035052 directory_length 3, crc 20562
42c 120001f2 specifier id
430 13000001 version
434 17101800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002eeb6 leaf_length 2, crc 61110
43c 0001f200 company_id 0001f2 |
440 00005015 device_id 0000005015 | EUI-64 0001f20000005015
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| /openbmc/linux/sound/firewire/ |
| H A D | Kconfig | d13d6b28 Wed Jun 16 03:28:46 CDT 2021 Takashi Sakamoto <o-takashi@sakamocchi.jp> ALSA: firewire-motu: add support for MOTU 828
MOTU 828 is a first model in MOTU FireWire series, produced in 2001. This
model consists of three chips:
* Texas Instruments TSB41AB1 (Physical layer for IEEE 1394 bus)
* Philips Semiconductors 1394L21BE (Link layer for IEEE 1394 bus and
packet processing layer)
* QuickLogic QuickRAM QL4016 (Data block processing layer and digital
signal processing)
This commit adds a support for this model, with its unique protocol as
version 1. The features of this protocol are:
* no MIDI support.
* Rx packets have no data chunks for control and status messages.
* Tx packets have 2 data chunks for control and status messages in the
end of each data block. The chunks consist of data block counter
(4 byte) and message (2 byte).
* All of settings are represented in bit flag in one quadlet address
(0x'ffff'f000'0b00).
* When optical interface is configured as S/PDIF, signals of the interface
is multiplexed for packets, instead of signals of coaxial interface.
* The internal multiplexer is not configured by software.
I note that the device has a quirk to mute output voluntarily during
receiving batch of packets in the beginning of packet streaming. The
operation to unmute should be done by software enough after the device
shifts the state, however it's not deterministic. Furthermore, just
after switching rate of sampling clock, the device keeps the state longer.
This patch manages to sleep 100 msec before unmute operation, but it may
fail to release the mute in the case that the rate is changed. As a
workaround, users can restart packet streaming at the same rate, or write
to specific register from userspace.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04105c54 bus_info_length 4, crc_length 16, crc 23636
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 00005015 device_id 0000005015 | EUI-64 0001f20000005015
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 00035052 directory_length 3, crc 20562
42c 120001f2 specifier id
430 13000001 version
434 17101800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002eeb6 leaf_length 2, crc 61110
43c 0001f200 company_id 0001f2 |
440 00005015 device_id 0000005015 | EUI-64 0001f20000005015
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|