/openbmc/linux/drivers/staging/wlan-ng/ |
H A D | p80211metastruct.h | cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver.
- It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211 Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
H A D | Makefile | cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver.
- It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211 Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
H A D | p80211netdev.h | cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver.
- It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211 Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
H A D | prism2usb.c | cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver.
- It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211 Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
H A D | prism2mgmt.c | cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver.
- It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211 Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
H A D | cfg80211.c | cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver.
- It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211 Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
H A D | prism2sta.c | cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver.
- It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211 Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
H A D | p80211netdev.c | cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver.
- It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211 Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
H A D | hfa384x.h | cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver.
- It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> cb3126e6 Thu Jun 03 17:04:06 CDT 2010 Karl Relton <karllinuxtest.relton@ntlworld.com> Staging: wlan-ng: Switch from wext to cfg80211 Switch driver over from wext to cfg80211 interface. Some Notes: - This patch moves the driver wholesale from wext to cfg80211. Wext support is still provided through the cfg80211 provided wext compatability layer. - Currently only infrastructure mode is implemented. Ad hoc mode is not yet implemented, but can be added. - It does not support connecting to a specified bssid, instead roaming is handled by the card itself. This matches the behaviour of the existing driver. - It has been tested using NetworkManager (via wpa_supplicant) configured to use the wext compatability layer, and then again with the native nl80211 layer. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|