Searched hist:"9 df25ccc" (Results 1 – 1 of 1) sorted by relevance
| /openbmc/linux/arch/arm/configs/ |
| H A D | tegra_defconfig | 9df25ccc Wed Aug 15 12:08:58 CDT 2012 Stephen Warren <swarren@nvidia.com> ARM: tegra: defconfig updates
Removed:
* MACH_HARMONY
* MACH_PAZ00
* MACH_TRIMSLICE
These used to enable board support for individual boards. Now that we
only support device tree, these options have been removed.
Added:
* TEGRA_PCI
This used to be selected by the board options above. Select this
explicitly now that the board options have been removed.
* TEGRA_DEBUG_UART_AUTO_ODMDATA
This makes the kernel automatically pick a UART for earlyprintk. It's
likely to be a useful option for everyone.
* PWM
* PWM_TEGRA
Enable the new PWM subsystem, and the Tegra driver within it.
* GPIO_PCA953X
* GPIO_PCA953X_IRQ
* MFD_MAX8907
* REGULATOR_MAX8907
* RTC_DRV_MAX8907
* RTC_DRV_TPS65910
Various drivers required for the Whistler board.
* RTC_INTF_SYSFS
* RTC_INTF_PROC
* RTC_INTF_DEV
Some RTC options that Kconfig help implies should typically be
enabled.
* Wifi chip (rt3070)
* Bluetooth (btusb)
* Camera (uvcvideo)
* 3G modem (acm and wdm)
* rfkill
* GPIO LEDs
* NVEC
Various devices and features found on PAZ00 boards.
Some of these are enabled as modules because they are not needed for
boot and will not be used on other boards. Wifi also needs to be
module because of the firmware loader.
The update also enabled support for the rfkill switch, the Wifi LED and
the nvec power and led driver which got lost in the past.
* DEVTMPFS, TMPFS_POSIX_ACL
These are mandatory on modern linux distros.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
9df25ccc Wed Aug 15 12:08:58 CDT 2012 Stephen Warren <swarren@nvidia.com> ARM: tegra: defconfig updates
Removed:
* MACH_HARMONY
* MACH_PAZ00
* MACH_TRIMSLICE
These used to enable board support for individual boards. Now that we
only support device tree, these options have been removed.
Added:
* TEGRA_PCI
This used to be selected by the board options above. Select this
explicitly now that the board options have been removed.
* TEGRA_DEBUG_UART_AUTO_ODMDATA
This makes the kernel automatically pick a UART for earlyprintk. It's
likely to be a useful option for everyone.
* PWM
* PWM_TEGRA
Enable the new PWM subsystem, and the Tegra driver within it.
* GPIO_PCA953X
* GPIO_PCA953X_IRQ
* MFD_MAX8907
* REGULATOR_MAX8907
* RTC_DRV_MAX8907
* RTC_DRV_TPS65910
Various drivers required for the Whistler board.
* RTC_INTF_SYSFS
* RTC_INTF_PROC
* RTC_INTF_DEV
Some RTC options that Kconfig help implies should typically be
enabled.
* Wifi chip (rt3070)
* Bluetooth (btusb)
* Camera (uvcvideo)
* 3G modem (acm and wdm)
* rfkill
* GPIO LEDs
* NVEC
Various devices and features found on PAZ00 boards.
Some of these are enabled as modules because they are not needed for
boot and will not be used on other boards. Wifi also needs to be
module because of the firmware loader.
The update also enabled support for the rfkill switch, the Wifi LED and
the nvec power and led driver which got lost in the past.
* DEVTMPFS, TMPFS_POSIX_ACL
These are mandatory on modern linux distros.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|