| /openbmc/openpower-vpd-parser/ |
| H A D | const.hpp | 6bd095f9 Wed Feb 23 10:20:20 CST 2022 Alpana Kumari <alpankum@in.ibm.com> PEL support for GPIO failure
This commit logs PEL in case of GPIO line name is not valid or this line
is busy for some other purpose or I2C line itself is bad.
Test:
Tried to access some dummy GPIO line name, which doesn't exist.
root@rain111bmc:/tmp# peltool -l
{
"0x50002D5E": {
"SRC": "BD554007",
"Message": "GPIO line couldn't find or read.",
"PLID": "0x50002D5E",
"CreatorID": "BMC",
"Subsystem": "CEC Hardware - VPD Interface",
"Commit Time": "03/07/2022 18:32:43",
"Sev": "Predictive Error",
"CompID": "0x4000"
},
root@rain111bmc:/tmp# peltool -i "0x50002D5E"
….
"Error Details": {
"Message": "GPIO line couldn't be found or read."
},
"Valid Word Count": "0x09",
"Reference Code": "BD554007",
"Hex Word 2": "00000055",
"Hex Word 3": "2E2D0010",
"Hex Word 4": "00000000",
"Hex Word 5": "00000000",
"Hex Word 6": "00000000",
"Hex Word 7": "00000000",
"Hex Word 8": "00000000",
"Hex Word 9": "00000000",
"Callout Section": {
"Callout Count": "2",
"Callouts": [{
"FRU Type": "Normal Hardware FRU",
"Priority": "Mandatory, replace all with this type as a unit",
"Location Code": "U78DA.ND0.WZS0042-P0-C5",
"Part Number": "02WF327",
"CCIN": "6B58",
"Serial Number": "Y131UF18H003"
}, {
"FRU Type": "Normal Hardware FRU",
"Priority": "Lowest priority replacement",
"Location Code": "U78DA.ND0.WZS0042-P0",
"Part Number": "02WG676",
"CCIN": "2E2D",
"Serial Number": "Y131UF07302T"
}]
}
…….
……..
},
"User Data 0": {
"Section Version": "1",
"Sub-section type": "1",
"Created by": "0x2000",
"BMCState": "Ready",
"BootState": "Unspecified",
"ChassisState": "Off",
"FW Version ID": "fw1020.00-41.2-275-g429803741-dirty",
"HostState": "Off",
"System IM": "50001001"
},
"User Data 1": {
"Section Version": "1",
"Sub-section type": "1",
"Created by": "0x2000",
"CALLOUT_IIC_ADDR": "0x0061",
"CALLOUT_IIC_BUS": "8",
"DESCRIPTION": "Couldn't find output line for the GPIO. Skipping this GPIO action. GPIO : SLOT10_PRSNT_EN_RSVD"
},
"User Data 2": {
"Section Version": "1",
"Sub-section type": "1",
"Created by": "0x2000",
"PEL Internal Debug Data": {
"SRC": [
"MRU: /sys-0/node-0/nisqually-0/ebmc-card-connector-0/ingraham-0/BMC-0",
"I2C: bus: 8 address: 97 dest: /sys-0/node-0/nisqually-0/PCA9552-5"
]
}
}
}
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Change-Id: I6f5582ea614e663133bac2e580ee5c0b36c3a038
|
| H A D | ibm_vpd_utils.cpp | 6bd095f9 Wed Feb 23 10:20:20 CST 2022 Alpana Kumari <alpankum@in.ibm.com> PEL support for GPIO failure
This commit logs PEL in case of GPIO line name is not valid or this line
is busy for some other purpose or I2C line itself is bad.
Test:
Tried to access some dummy GPIO line name, which doesn't exist.
root@rain111bmc:/tmp# peltool -l
{
"0x50002D5E": {
"SRC": "BD554007",
"Message": "GPIO line couldn't find or read.",
"PLID": "0x50002D5E",
"CreatorID": "BMC",
"Subsystem": "CEC Hardware - VPD Interface",
"Commit Time": "03/07/2022 18:32:43",
"Sev": "Predictive Error",
"CompID": "0x4000"
},
root@rain111bmc:/tmp# peltool -i "0x50002D5E"
….
"Error Details": {
"Message": "GPIO line couldn't be found or read."
},
"Valid Word Count": "0x09",
"Reference Code": "BD554007",
"Hex Word 2": "00000055",
"Hex Word 3": "2E2D0010",
"Hex Word 4": "00000000",
"Hex Word 5": "00000000",
"Hex Word 6": "00000000",
"Hex Word 7": "00000000",
"Hex Word 8": "00000000",
"Hex Word 9": "00000000",
"Callout Section": {
"Callout Count": "2",
"Callouts": [{
"FRU Type": "Normal Hardware FRU",
"Priority": "Mandatory, replace all with this type as a unit",
"Location Code": "U78DA.ND0.WZS0042-P0-C5",
"Part Number": "02WF327",
"CCIN": "6B58",
"Serial Number": "Y131UF18H003"
}, {
"FRU Type": "Normal Hardware FRU",
"Priority": "Lowest priority replacement",
"Location Code": "U78DA.ND0.WZS0042-P0",
"Part Number": "02WG676",
"CCIN": "2E2D",
"Serial Number": "Y131UF07302T"
}]
}
…….
……..
},
"User Data 0": {
"Section Version": "1",
"Sub-section type": "1",
"Created by": "0x2000",
"BMCState": "Ready",
"BootState": "Unspecified",
"ChassisState": "Off",
"FW Version ID": "fw1020.00-41.2-275-g429803741-dirty",
"HostState": "Off",
"System IM": "50001001"
},
"User Data 1": {
"Section Version": "1",
"Sub-section type": "1",
"Created by": "0x2000",
"CALLOUT_IIC_ADDR": "0x0061",
"CALLOUT_IIC_BUS": "8",
"DESCRIPTION": "Couldn't find output line for the GPIO. Skipping this GPIO action. GPIO : SLOT10_PRSNT_EN_RSVD"
},
"User Data 2": {
"Section Version": "1",
"Sub-section type": "1",
"Created by": "0x2000",
"PEL Internal Debug Data": {
"SRC": [
"MRU: /sys-0/node-0/nisqually-0/ebmc-card-connector-0/ingraham-0/BMC-0",
"I2C: bus: 8 address: 97 dest: /sys-0/node-0/nisqually-0/PCA9552-5"
]
}
}
}
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Change-Id: I6f5582ea614e663133bac2e580ee5c0b36c3a038
|