/openbmc/linux/arch/loongarch/include/asm/ |
H A D | dmi.h | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | acenv.h | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | bootinfo.h | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | setup.h | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | efi.h | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | acpi.h | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
/openbmc/linux/arch/loongarch/kernel/ |
H A D | reset.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | cacheinfo.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | env.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | efi.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | topology.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | mem.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | cpu-probe.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | time.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | acpi.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | setup.c | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
H A D | head.S | 628c3bb4 Tue May 31 05:04:11 CDT 2022 Huacai Chen <chenhuacai@loongson.cn> LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|