| /openbmc/libpldm/tests/dsp/ |
| H A D | bios.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | fru.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | base.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | meson.build | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | bios_table_iter.c | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | firmware_update.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | pdr.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | platform.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | bios_table.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| /openbmc/libpldm/src/dsp/ |
| H A D | bios.c | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | meson.build | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | base.c | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | fru.c | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | firmware_update.c | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | pdr.c | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | platform.c | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | bios_table.c | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| /openbmc/libpldm/tests/ |
| H A D | utils.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | meson.build | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| /openbmc/libpldm/tests/oem/ibm/ |
| H A D | host.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | fileio.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | meson.build | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| /openbmc/libpldm/tests/oem/meta/ |
| H A D | meson.build | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| H A D | fileio.cpp | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
| /openbmc/libpldm/src/ |
| H A D | meson.build | 48761c62 Mon Jun 03 01:18:26 CDT 2024 Andrew Jeffery <andrew@codeconstruct.com.au> libpldm: Reorganize source and test files
Primarily this is about moving specification-specific files into
'dsp/' (in the "DMTF Standard Publication" sense[1]) subdirectories of
both src/ and tests/.
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP4014_2.14.0.pdf
libpldm is a concrete C implementation of the PLDM family of
specifications. This invokes some accidental complexity[2] such as the
msgbuf APIs and other concerns.
[2]: https://en.wikipedia.org/wiki/No_Silver_Bullet
Separate the essential complexity (everything under the dsp/
subdirectories) from the accidental complexity (almost everything else).
While doing so, I took the opportunity to drop the 'libpldm_' prefix
and '_test' suffix from a variety of tests. The 'libpldm_' prefix is a
hangover from the days when libpldm was a subproject of OpenBMC's pldm
repo. The '_test' suffix feels redundant given the parent directory
path.
Note that we maintain separation of the src/ and tests/. The test suite
is implemented in C++ while libpldm's APIs are declared and defined in
C. The ability to chop all the tests and C++ out of the implementation
by ignoring a subtree seems like a desirable property when vendoring the
library into other projects.
Finally, update the x86_64 GCC ABI dump, as rearranging the source
causes a lot of churn in its definitions.
Change-Id: Icffcc6cf48b3101ecd38168827c0a81cffb8f083
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|