Searched hist:"44 d1240d" (Results 1 – 7 of 7) sorted by relevance
| /openbmc/linux/Documentation/gpu/ |
| H A D | kms-properties.csv | 44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
| /openbmc/linux/drivers/gpu/drm/ |
| H A D | drm_blend.c | 44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
| H A D | drm_crtc_internal.h | 44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
| H A D | drm_atomic.c | 44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
| H A D | Makefile | 44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
| H A D | drm_atomic_helper.c | 44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
| /openbmc/linux/include/drm/ |
| H A D | drm_crtc.h | 44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
44d1240d Mon Jun 13 04:11:26 CDT 2016 Marek Szyprowski <m.szyprowski@samsung.com> drm: add generic zpos property
version 8:
- move drm_blend.o from drm-y to drm_kms_helper-y to avoid
EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos)
- remove dead function declarations in drm_crtc.h
version 7:
- remove useless EXPORT_SYMBOL()
- better z-order wording in Documentation
version 6:
- add zpos in gpu documentation file
- merge Ville patch about zpos initial value and API improvement.
I have split Ville patch between zpos core and drivers
version 5:
- remove zpos range check and comeback to 0 to N-1
normalization algorithm
version 4:
- make sure that normalized zpos value is stay
in the defined property range and warn user if not
This patch adds support for generic plane's zpos property property with
well-defined semantics:
- added zpos properties to plane and plane state structures
- added helpers for normalizing zpos properties of given set of planes
- well defined semantics: planes are sorted by zpos values and then plane
id value if zpos equals
Normalized zpos values are calculated automatically when generic
muttable zpos property has been initialized. Drivers can simply use
plane_state->normalized_zpos in their atomic_check and/or plane_update
callbacks without any additional calls to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Compare to Marek's original patch zpos property is now specific to each
plane and no more to the core.
Normalize function take care of the range of per plane defined range
before set normalized_zpos.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|