| /openbmc/bmcweb/redfish-core/include/ |
| H A D | snmp_trap_event_clients.hpp | 3d30708f Thu Nov 26 00:12:12 CST 2020 Chicago Duan <duanzhijia01@inspur.com> Redfish: Implement SNMP Trap
Implement SNMPTrap in EventDestination of Redfish. We can use
this Redfish interface to add/get/delete the SNMPTrap port and
destination address. When the error
log is generated, phosphor-snmp
will send SNMPTrap messages to our configured SNMPTrap destination.
The MIB is here:
[1] https://github.com/openbmc/phosphor-snmp/blob/master/mibs/NotificationMIB.txt
Refer:
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0268_2019.3.pdf
SNMPTrap test: Tested ok on the Witherspoon machine.
Steps are as follows:
1. Use this Redfish interface to configure the port and
destination address:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.89:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c"}'
2. Run the SNMPTrap receiver tool in the destination
computer(192.168.31.89),I used iReasoning MIB Browser as the
SNMPTrap receiving tool.
3. Trigger error logs such as power supply AC Lost. We will see
the error log under /xyz/openbmc_project/logging.
4. The SNMPTrap receiver tool in the destination computer received
the SNMPTrap sent by OpenBMC.
Tested: Validator passes
1. Add snmp client:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.89:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c",
"Context": "testContext"}'
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_0_0.Message",
"Message": "The resource has been created successfully",
"MessageArgs": [],
"MessageId": "Base.1.8.1.Created",
"MessageSeverity": "OK",
"Resolution": "None"
}
]
}
2. Get snmp trap client configurations:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp1
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1",
"@odata.type": "#EventDestination.v1_7_0.EventDestination",
"Context": "testContext",
"Destination": "snmp://192.168.31.89:162",
"EventFormatType": "Event",
"Id": "snmp1",
"Name": "Event Destination snmp1",
"Protocol": "SNMPv2c",
"SubscriptionType": "SNMPTrap"
}
Reboot the BMC, and get the snmp trap client again:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp1
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1",
"@odata.type": "#EventDestination.v1_7_0.EventDestination",
"Context": "testContext",
"Destination": "snmp://192.168.31.89:162",
"EventFormatType": "Event",
"Id": "snmp1",
"Name": "Event Destination snmp1",
"Protocol": "SNMPv2c",
"SubscriptionType": "SNMPTrap"
}
3. Delete snmp client:
curl -k -H "X-Auth-Token: $token" -X DELETE
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp1
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "Successfully Completed Request",
"MessageArgs": [],
"MessageId": "Base.1.8.1.Success",
"MessageSeverity": "OK",
"Resolution": "None"
}
]
}
4. After we have added some SNMP clients using Redfish, we can see them
in Dbus:
busctl tree xyz.openbmc_project.Network.SNMP
`-/xyz
`-/xyz/openbmc_project
`-/xyz/openbmc_project/network
`-/xyz/openbmc_project/network/snmp
`-/xyz/openbmc_project/network/snmp/manager
|-/xyz/openbmc_project/network/snmp/manager/1
busctl introspect xyz.openbmc_project.Network.SNMP
/xyz/openbmc_project/network/snmp/manager/1
xyz.openbmc_project.Network.Client
NAME TYPE SIGNATURE RESULT/VALUE FLAGS
.Address property s "192.168.31.89" emits-change writable
.Port property q 162 emits-change writable
5. Use "busctl call" add client
busctl call xyz.openbmc_project.Network.SNMP
/xyz/openbmc_project/network/snmp/manager
xyz.openbmc_project.Network.Client.Create
Client sq 192.168.31.90 162
s "/xyz/openbmc_project/network/snmp/manager/2"
We will see it use the redfish url:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp2
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp2",
"@odata.type": "#EventDestination.v1_7_0.EventDestination",
"Context": "",
"Destination": "snmp://192.168.31.90:162",
"EventFormatType": "Event",
"Id": "snmp2",
"Name": "Event Destination snmp2",
"Protocol": "SNMPv2c",
"SubscriptionType": "SNMPTrap"
}
6. Deleting snmp client using "busctl"
First, we use redfish to add some SNMP clients:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.90:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c",
"Context": "testContext0"}'
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.91:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c",
"Context": "testContext1"}'
Then we can use redfish to get the subscriptions:
curl -k -H "X-Auth-Token: $token" -XGET
https://${bmc}/redfish/v1/EventService/Subscriptions
{
"@odata.id": "/redfish/v1/EventService/Subscriptions",
"@odata.type":"#EventDestinationCollection.EventDestinationCollection",
"Members": [
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1"
},
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp2"
}
],
"Members@odata.count": 2,
"Name": "Event Destination Collections"
}
Now we use busctl to delete SNMP client 2:
busctl call xyz.openbmc_project.Network.SNMP
/xyz/openbmc_project/network/snmp/manager/2
xyz.openbmc_project.Object.Delete Delete
Then we won't see snmp2 in the subscriptions of redfish:
curl -k -H "X-Auth-Token: $token" -XGET
https://${bmc}/redfish/v1/EventService/Subscriptions
{
"@odata.id": "/redfish/v1/EventService/Subscriptions",
"@odata.type":"#EventDestinationCollection.EventDestinationCollection",
"Members": [
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1"
}
],
"Members@odata.count": 1,
"Name": "Event Destination Collections"
}
7. Test the generic event subscription to make sure it didn't impacted
Add Redfish subscription:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "https://192.168.31.189:443",
"SubscriptionType": "RedfishEvent", "Protocol": "Redfish",
"Context": "testContext"}'
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "The resource has been created successfully.",
"MessageArgs": [],
"MessageId": "Base.1.13.0.Created",
"MessageSeverity": "OK",
"Resolution": "None."
}
]
Get Redfish subscription:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/1358109191
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/1358109191",
"@odata.type": "#EventDestination.v1_8_0.EventDestination",
"Context": "testContext",
"DeliveryRetryPolicy": "TerminateAfterRetries",
"Destination": "https://192.168.31.189:443",
"EventFormatType": "Event",
"HttpHeaders": [],
"Id": "1358109191",
"MessageIds": [],
"MetricReportDefinitions": [],
"Name": "Event Destination 1358109191",
"Protocol": "Redfish",
"RegistryPrefixes": [],
"ResourceTypes": [],
"SubscriptionType": "RedfishEvent"
}
Signed-off-by: Chicago Duan <duanzhijia01@inspur.com>
Signed-off-by: Ed Tanous <edtanous@google.com>
Change-Id: Ie589b3934ee749c7e0add35e3ed1b0b7e817c557
|
| /openbmc/bmcweb/http/ |
| H A D | utility.hpp | 3d30708f Thu Nov 26 00:12:12 CST 2020 Chicago Duan <duanzhijia01@inspur.com> Redfish: Implement SNMP Trap
Implement SNMPTrap in EventDestination of Redfish. We can use
this Redfish interface to add/get/delete the SNMPTrap port and
destination address. When the error
log is generated, phosphor-snmp
will send SNMPTrap messages to our configured SNMPTrap destination.
The MIB is here:
[1] https://github.com/openbmc/phosphor-snmp/blob/master/mibs/NotificationMIB.txt
Refer:
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0268_2019.3.pdf
SNMPTrap test: Tested ok on the Witherspoon machine.
Steps are as follows:
1. Use this Redfish interface to configure the port and
destination address:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.89:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c"}'
2. Run the SNMPTrap receiver tool in the destination
computer(192.168.31.89),I used iReasoning MIB Browser as the
SNMPTrap receiving tool.
3. Trigger error logs such as power supply AC Lost. We will see
the error log under /xyz/openbmc_project/logging.
4. The SNMPTrap receiver tool in the destination computer received
the SNMPTrap sent by OpenBMC.
Tested: Validator passes
1. Add snmp client:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.89:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c",
"Context": "testContext"}'
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_0_0.Message",
"Message": "The resource has been created successfully",
"MessageArgs": [],
"MessageId": "Base.1.8.1.Created",
"MessageSeverity": "OK",
"Resolution": "None"
}
]
}
2. Get snmp trap client configurations:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp1
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1",
"@odata.type": "#EventDestination.v1_7_0.EventDestination",
"Context": "testContext",
"Destination": "snmp://192.168.31.89:162",
"EventFormatType": "Event",
"Id": "snmp1",
"Name": "Event Destination snmp1",
"Protocol": "SNMPv2c",
"SubscriptionType": "SNMPTrap"
}
Reboot the BMC, and get the snmp trap client again:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp1
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1",
"@odata.type": "#EventDestination.v1_7_0.EventDestination",
"Context": "testContext",
"Destination": "snmp://192.168.31.89:162",
"EventFormatType": "Event",
"Id": "snmp1",
"Name": "Event Destination snmp1",
"Protocol": "SNMPv2c",
"SubscriptionType": "SNMPTrap"
}
3. Delete snmp client:
curl -k -H "X-Auth-Token: $token" -X DELETE
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp1
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "Successfully Completed Request",
"MessageArgs": [],
"MessageId": "Base.1.8.1.Success",
"MessageSeverity": "OK",
"Resolution": "None"
}
]
}
4. After we have added some SNMP clients using Redfish, we can see them
in Dbus:
busctl tree xyz.openbmc_project.Network.SNMP
`-/xyz
`-/xyz/openbmc_project
`-/xyz/openbmc_project/network
`-/xyz/openbmc_project/network/snmp
`-/xyz/openbmc_project/network/snmp/manager
|-/xyz/openbmc_project/network/snmp/manager/1
busctl introspect xyz.openbmc_project.Network.SNMP
/xyz/openbmc_project/network/snmp/manager/1
xyz.openbmc_project.Network.Client
NAME TYPE SIGNATURE RESULT/VALUE FLAGS
.Address property s "192.168.31.89" emits-change writable
.Port property q 162 emits-change writable
5. Use "busctl call" add client
busctl call xyz.openbmc_project.Network.SNMP
/xyz/openbmc_project/network/snmp/manager
xyz.openbmc_project.Network.Client.Create
Client sq 192.168.31.90 162
s "/xyz/openbmc_project/network/snmp/manager/2"
We will see it use the redfish url:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp2
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp2",
"@odata.type": "#EventDestination.v1_7_0.EventDestination",
"Context": "",
"Destination": "snmp://192.168.31.90:162",
"EventFormatType": "Event",
"Id": "snmp2",
"Name": "Event Destination snmp2",
"Protocol": "SNMPv2c",
"SubscriptionType": "SNMPTrap"
}
6. Deleting snmp client using "busctl"
First, we use redfish to add some SNMP clients:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.90:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c",
"Context": "testContext0"}'
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.91:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c",
"Context": "testContext1"}'
Then we can use redfish to get the subscriptions:
curl -k -H "X-Auth-Token: $token" -XGET
https://${bmc}/redfish/v1/EventService/Subscriptions
{
"@odata.id": "/redfish/v1/EventService/Subscriptions",
"@odata.type":"#EventDestinationCollection.EventDestinationCollection",
"Members": [
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1"
},
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp2"
}
],
"Members@odata.count": 2,
"Name": "Event Destination Collections"
}
Now we use busctl to delete SNMP client 2:
busctl call xyz.openbmc_project.Network.SNMP
/xyz/openbmc_project/network/snmp/manager/2
xyz.openbmc_project.Object.Delete Delete
Then we won't see snmp2 in the subscriptions of redfish:
curl -k -H "X-Auth-Token: $token" -XGET
https://${bmc}/redfish/v1/EventService/Subscriptions
{
"@odata.id": "/redfish/v1/EventService/Subscriptions",
"@odata.type":"#EventDestinationCollection.EventDestinationCollection",
"Members": [
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1"
}
],
"Members@odata.count": 1,
"Name": "Event Destination Collections"
}
7. Test the generic event subscription to make sure it didn't impacted
Add Redfish subscription:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "https://192.168.31.189:443",
"SubscriptionType": "RedfishEvent", "Protocol": "Redfish",
"Context": "testContext"}'
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "The resource has been created successfully.",
"MessageArgs": [],
"MessageId": "Base.1.13.0.Created",
"MessageSeverity": "OK",
"Resolution": "None."
}
]
Get Redfish subscription:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/1358109191
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/1358109191",
"@odata.type": "#EventDestination.v1_8_0.EventDestination",
"Context": "testContext",
"DeliveryRetryPolicy": "TerminateAfterRetries",
"Destination": "https://192.168.31.189:443",
"EventFormatType": "Event",
"HttpHeaders": [],
"Id": "1358109191",
"MessageIds": [],
"MetricReportDefinitions": [],
"Name": "Event Destination 1358109191",
"Protocol": "Redfish",
"RegistryPrefixes": [],
"ResourceTypes": [],
"SubscriptionType": "RedfishEvent"
}
Signed-off-by: Chicago Duan <duanzhijia01@inspur.com>
Signed-off-by: Ed Tanous <edtanous@google.com>
Change-Id: Ie589b3934ee749c7e0add35e3ed1b0b7e817c557
|
| /openbmc/bmcweb/redfish-core/lib/ |
| H A D | event_service.hpp | 3d30708f Thu Nov 26 00:12:12 CST 2020 Chicago Duan <duanzhijia01@inspur.com> Redfish: Implement SNMP Trap
Implement SNMPTrap in EventDestination of Redfish. We can use
this Redfish interface to add/get/delete the SNMPTrap port and
destination address. When the error
log is generated, phosphor-snmp
will send SNMPTrap messages to our configured SNMPTrap destination.
The MIB is here:
[1] https://github.com/openbmc/phosphor-snmp/blob/master/mibs/NotificationMIB.txt
Refer:
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0268_2019.3.pdf
SNMPTrap test: Tested ok on the Witherspoon machine.
Steps are as follows:
1. Use this Redfish interface to configure the port and
destination address:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.89:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c"}'
2. Run the SNMPTrap receiver tool in the destination
computer(192.168.31.89),I used iReasoning MIB Browser as the
SNMPTrap receiving tool.
3. Trigger error logs such as power supply AC Lost. We will see
the error log under /xyz/openbmc_project/logging.
4. The SNMPTrap receiver tool in the destination computer received
the SNMPTrap sent by OpenBMC.
Tested: Validator passes
1. Add snmp client:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.89:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c",
"Context": "testContext"}'
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_0_0.Message",
"Message": "The resource has been created successfully",
"MessageArgs": [],
"MessageId": "Base.1.8.1.Created",
"MessageSeverity": "OK",
"Resolution": "None"
}
]
}
2. Get snmp trap client configurations:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp1
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1",
"@odata.type": "#EventDestination.v1_7_0.EventDestination",
"Context": "testContext",
"Destination": "snmp://192.168.31.89:162",
"EventFormatType": "Event",
"Id": "snmp1",
"Name": "Event Destination snmp1",
"Protocol": "SNMPv2c",
"SubscriptionType": "SNMPTrap"
}
Reboot the BMC, and get the snmp trap client again:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp1
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1",
"@odata.type": "#EventDestination.v1_7_0.EventDestination",
"Context": "testContext",
"Destination": "snmp://192.168.31.89:162",
"EventFormatType": "Event",
"Id": "snmp1",
"Name": "Event Destination snmp1",
"Protocol": "SNMPv2c",
"SubscriptionType": "SNMPTrap"
}
3. Delete snmp client:
curl -k -H "X-Auth-Token: $token" -X DELETE
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp1
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "Successfully Completed Request",
"MessageArgs": [],
"MessageId": "Base.1.8.1.Success",
"MessageSeverity": "OK",
"Resolution": "None"
}
]
}
4. After we have added some SNMP clients using Redfish, we can see them
in Dbus:
busctl tree xyz.openbmc_project.Network.SNMP
`-/xyz
`-/xyz/openbmc_project
`-/xyz/openbmc_project/network
`-/xyz/openbmc_project/network/snmp
`-/xyz/openbmc_project/network/snmp/manager
|-/xyz/openbmc_project/network/snmp/manager/1
busctl introspect xyz.openbmc_project.Network.SNMP
/xyz/openbmc_project/network/snmp/manager/1
xyz.openbmc_project.Network.Client
NAME TYPE SIGNATURE RESULT/VALUE FLAGS
.Address property s "192.168.31.89" emits-change writable
.Port property q 162 emits-change writable
5. Use "busctl call" add client
busctl call xyz.openbmc_project.Network.SNMP
/xyz/openbmc_project/network/snmp/manager
xyz.openbmc_project.Network.Client.Create
Client sq 192.168.31.90 162
s "/xyz/openbmc_project/network/snmp/manager/2"
We will see it use the redfish url:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/snmp2
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp2",
"@odata.type": "#EventDestination.v1_7_0.EventDestination",
"Context": "",
"Destination": "snmp://192.168.31.90:162",
"EventFormatType": "Event",
"Id": "snmp2",
"Name": "Event Destination snmp2",
"Protocol": "SNMPv2c",
"SubscriptionType": "SNMPTrap"
}
6. Deleting snmp client using "busctl"
First, we use redfish to add some SNMP clients:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.90:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c",
"Context": "testContext0"}'
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "snmp://192.168.31.91:162",
"SubscriptionType": "SNMPTrap", "Protocol": "SNMPv2c",
"Context": "testContext1"}'
Then we can use redfish to get the subscriptions:
curl -k -H "X-Auth-Token: $token" -XGET
https://${bmc}/redfish/v1/EventService/Subscriptions
{
"@odata.id": "/redfish/v1/EventService/Subscriptions",
"@odata.type":"#EventDestinationCollection.EventDestinationCollection",
"Members": [
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1"
},
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp2"
}
],
"Members@odata.count": 2,
"Name": "Event Destination Collections"
}
Now we use busctl to delete SNMP client 2:
busctl call xyz.openbmc_project.Network.SNMP
/xyz/openbmc_project/network/snmp/manager/2
xyz.openbmc_project.Object.Delete Delete
Then we won't see snmp2 in the subscriptions of redfish:
curl -k -H "X-Auth-Token: $token" -XGET
https://${bmc}/redfish/v1/EventService/Subscriptions
{
"@odata.id": "/redfish/v1/EventService/Subscriptions",
"@odata.type":"#EventDestinationCollection.EventDestinationCollection",
"Members": [
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/snmp1"
}
],
"Members@odata.count": 1,
"Name": "Event Destination Collections"
}
7. Test the generic event subscription to make sure it didn't impacted
Add Redfish subscription:
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/EventService/Subscriptions
-d '{"Destination": "https://192.168.31.189:443",
"SubscriptionType": "RedfishEvent", "Protocol": "Redfish",
"Context": "testContext"}'
{
"@Message.ExtendedInfo": [
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "The resource has been created successfully.",
"MessageArgs": [],
"MessageId": "Base.1.13.0.Created",
"MessageSeverity": "OK",
"Resolution": "None."
}
]
Get Redfish subscription:
curl -k -H "X-Auth-Token: $token" -X GET
https://${bmc}/redfish/v1/EventService/Subscriptions/1358109191
{
"@odata.id": "/redfish/v1/EventService/Subscriptions/1358109191",
"@odata.type": "#EventDestination.v1_8_0.EventDestination",
"Context": "testContext",
"DeliveryRetryPolicy": "TerminateAfterRetries",
"Destination": "https://192.168.31.189:443",
"EventFormatType": "Event",
"HttpHeaders": [],
"Id": "1358109191",
"MessageIds": [],
"MetricReportDefinitions": [],
"Name": "Event Destination 1358109191",
"Protocol": "Redfish",
"RegistryPrefixes": [],
"ResourceTypes": [],
"SubscriptionType": "RedfishEvent"
}
Signed-off-by: Chicago Duan <duanzhijia01@inspur.com>
Signed-off-by: Ed Tanous <edtanous@google.com>
Change-Id: Ie589b3934ee749c7e0add35e3ed1b0b7e817c557
|