| /openbmc/linux/arch/powerpc/kernel/ptrace/ |
| H A D | ptrace-novsx.c | 3618250c Wed Mar 31 09:14:58 CDT 2021 Christophe Leroy <christophe.leroy@csgroup.eu> powerpc/ptrace: Don't return error when getting/setting FP regs without CONFIG_PPC_FPU_REGS
An #ifdef CONFIG_PPC_FPU_REGS is missing in arch_ptrace() leading
to the following Oops because [REGSET_FPR] entry is not initialised in
native_regsets[].
[ 41.917608] BUG: Unable to handle kernel instruction fetch
[ 41.922849] Faulting instruction address: 0xff8fd228
[ 41.927760] Oops: Kernel access of bad area, sig: 11 [#1]
[ 41.933089] BE PAGE_SIZE=4K PREEMPT CMPC885
[ 41.940753] Modules linked in:
[ 41.943768] CPU: 0 PID: 366 Comm: gdb Not tainted 5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty #4835
[ 41.952800] NIP: ff8fd228 LR: c004d9e0 CTR: ff8fd228
[ 41.957790] REGS: caae9df0 TRAP: 0400 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 41.966741] MSR: 40009032 <EE,ME,IR,DR,RI> CR: 82004248 XER: 20000000
[ 41.973540]
[ 41.973540] GPR00: c004d9b4 caae9eb0 c1b64f60 c1b64520 c0713cd4 caae9eb8 c1bacdfc 00000004
[ 41.973540] GPR08: 00000200 ff8fd228 c1bac700 00001032 28004242 1061aaf4 00000001 106d64a0
[ 41.973540] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 41.973540] GPR24: 7fa0a580 7fa0a570 c1bacc00 c1b64520 c1bacc00 caae9ee8 00000108 c0713cd4
[ 42.009685] NIP [ff8fd228] 0xff8fd228
[ 42.013300] LR [c004d9e0] __regset_get+0x100/0x124
[ 42.018036] Call Trace:
[ 42.020443] [caae9eb0] [c004d9b4] __regset_get+0xd4/0x124 (unreliable)
[ 42.026899] [caae9ee0] [c004da94] copy_regset_to_user+0x5c/0xb0
[ 42.032751] [caae9f10] [c002f640] sys_ptrace+0xe4/0x588
[ 42.037915] [caae9f30] [c0011010] ret_from_syscall+0x0/0x28
[ 42.043422] --- interrupt: c00 at 0xfd1f8e4
[ 42.047553] NIP: 0fd1f8e4 LR: 1004a688 CTR: 00000000
[ 42.052544] REGS: caae9f40 TRAP: 0c00 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 42.061494] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 48004442 XER: 00000000
[ 42.068551]
[ 42.068551] GPR00: 0000001a 7fa0a040 77dad7e0 0000000e 00000170 00000000 7fa0a078 00000004
[ 42.068551] GPR08: 00000000 108deb88 108dda40 106d6010 44004442 1061aaf4 00000001 106d64a0
[ 42.068551] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 42.068551] GPR24: 7fa0a580 7fa0a570 1078fe00 1078fd70 1078fd70 00000170 0fdd3244 0000000d
[ 42.104696] NIP [0fd1f8e4] 0xfd1f8e4
[ 42.108225] LR [1004a688] 0x1004a688
[ 42.111753] --- interrupt: c00
[ 42.114768] Instruction dump:
[ 42.117698] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.125443] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.133195] ---[ end trace d35616f22ab2100c ]---
Adding the missing #ifdef is not good because gdb doesn't like getting
an error when getting registers.
Instead, make ptrace return 0s when CONFIG_PPC_FPU_REGS is not set.
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9121a44a2d50ba1af18d8aa5ada06c9a3bea8afd.1617200085.git.christophe.leroy@csgroup.eu
|
| H A D | ptrace-fpu.c | 3618250c Wed Mar 31 09:14:58 CDT 2021 Christophe Leroy <christophe.leroy@csgroup.eu> powerpc/ptrace: Don't return error when getting/setting FP regs without CONFIG_PPC_FPU_REGS
An #ifdef CONFIG_PPC_FPU_REGS is missing in arch_ptrace() leading
to the following Oops because [REGSET_FPR] entry is not initialised in
native_regsets[].
[ 41.917608] BUG: Unable to handle kernel instruction fetch
[ 41.922849] Faulting instruction address: 0xff8fd228
[ 41.927760] Oops: Kernel access of bad area, sig: 11 [#1]
[ 41.933089] BE PAGE_SIZE=4K PREEMPT CMPC885
[ 41.940753] Modules linked in:
[ 41.943768] CPU: 0 PID: 366 Comm: gdb Not tainted 5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty #4835
[ 41.952800] NIP: ff8fd228 LR: c004d9e0 CTR: ff8fd228
[ 41.957790] REGS: caae9df0 TRAP: 0400 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 41.966741] MSR: 40009032 <EE,ME,IR,DR,RI> CR: 82004248 XER: 20000000
[ 41.973540]
[ 41.973540] GPR00: c004d9b4 caae9eb0 c1b64f60 c1b64520 c0713cd4 caae9eb8 c1bacdfc 00000004
[ 41.973540] GPR08: 00000200 ff8fd228 c1bac700 00001032 28004242 1061aaf4 00000001 106d64a0
[ 41.973540] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 41.973540] GPR24: 7fa0a580 7fa0a570 c1bacc00 c1b64520 c1bacc00 caae9ee8 00000108 c0713cd4
[ 42.009685] NIP [ff8fd228] 0xff8fd228
[ 42.013300] LR [c004d9e0] __regset_get+0x100/0x124
[ 42.018036] Call Trace:
[ 42.020443] [caae9eb0] [c004d9b4] __regset_get+0xd4/0x124 (unreliable)
[ 42.026899] [caae9ee0] [c004da94] copy_regset_to_user+0x5c/0xb0
[ 42.032751] [caae9f10] [c002f640] sys_ptrace+0xe4/0x588
[ 42.037915] [caae9f30] [c0011010] ret_from_syscall+0x0/0x28
[ 42.043422] --- interrupt: c00 at 0xfd1f8e4
[ 42.047553] NIP: 0fd1f8e4 LR: 1004a688 CTR: 00000000
[ 42.052544] REGS: caae9f40 TRAP: 0c00 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 42.061494] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 48004442 XER: 00000000
[ 42.068551]
[ 42.068551] GPR00: 0000001a 7fa0a040 77dad7e0 0000000e 00000170 00000000 7fa0a078 00000004
[ 42.068551] GPR08: 00000000 108deb88 108dda40 106d6010 44004442 1061aaf4 00000001 106d64a0
[ 42.068551] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 42.068551] GPR24: 7fa0a580 7fa0a570 1078fe00 1078fd70 1078fd70 00000170 0fdd3244 0000000d
[ 42.104696] NIP [0fd1f8e4] 0xfd1f8e4
[ 42.108225] LR [1004a688] 0x1004a688
[ 42.111753] --- interrupt: c00
[ 42.114768] Instruction dump:
[ 42.117698] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.125443] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.133195] ---[ end trace d35616f22ab2100c ]---
Adding the missing #ifdef is not good because gdb doesn't like getting
an error when getting registers.
Instead, make ptrace return 0s when CONFIG_PPC_FPU_REGS is not set.
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9121a44a2d50ba1af18d8aa5ada06c9a3bea8afd.1617200085.git.christophe.leroy@csgroup.eu
|
| H A D | Makefile | 3618250c Wed Mar 31 09:14:58 CDT 2021 Christophe Leroy <christophe.leroy@csgroup.eu> powerpc/ptrace: Don't return error when getting/setting FP regs without CONFIG_PPC_FPU_REGS
An #ifdef CONFIG_PPC_FPU_REGS is missing in arch_ptrace() leading
to the following Oops because [REGSET_FPR] entry is not initialised in
native_regsets[].
[ 41.917608] BUG: Unable to handle kernel instruction fetch
[ 41.922849] Faulting instruction address: 0xff8fd228
[ 41.927760] Oops: Kernel access of bad area, sig: 11 [#1]
[ 41.933089] BE PAGE_SIZE=4K PREEMPT CMPC885
[ 41.940753] Modules linked in:
[ 41.943768] CPU: 0 PID: 366 Comm: gdb Not tainted 5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty #4835
[ 41.952800] NIP: ff8fd228 LR: c004d9e0 CTR: ff8fd228
[ 41.957790] REGS: caae9df0 TRAP: 0400 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 41.966741] MSR: 40009032 <EE,ME,IR,DR,RI> CR: 82004248 XER: 20000000
[ 41.973540]
[ 41.973540] GPR00: c004d9b4 caae9eb0 c1b64f60 c1b64520 c0713cd4 caae9eb8 c1bacdfc 00000004
[ 41.973540] GPR08: 00000200 ff8fd228 c1bac700 00001032 28004242 1061aaf4 00000001 106d64a0
[ 41.973540] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 41.973540] GPR24: 7fa0a580 7fa0a570 c1bacc00 c1b64520 c1bacc00 caae9ee8 00000108 c0713cd4
[ 42.009685] NIP [ff8fd228] 0xff8fd228
[ 42.013300] LR [c004d9e0] __regset_get+0x100/0x124
[ 42.018036] Call Trace:
[ 42.020443] [caae9eb0] [c004d9b4] __regset_get+0xd4/0x124 (unreliable)
[ 42.026899] [caae9ee0] [c004da94] copy_regset_to_user+0x5c/0xb0
[ 42.032751] [caae9f10] [c002f640] sys_ptrace+0xe4/0x588
[ 42.037915] [caae9f30] [c0011010] ret_from_syscall+0x0/0x28
[ 42.043422] --- interrupt: c00 at 0xfd1f8e4
[ 42.047553] NIP: 0fd1f8e4 LR: 1004a688 CTR: 00000000
[ 42.052544] REGS: caae9f40 TRAP: 0c00 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 42.061494] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 48004442 XER: 00000000
[ 42.068551]
[ 42.068551] GPR00: 0000001a 7fa0a040 77dad7e0 0000000e 00000170 00000000 7fa0a078 00000004
[ 42.068551] GPR08: 00000000 108deb88 108dda40 106d6010 44004442 1061aaf4 00000001 106d64a0
[ 42.068551] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 42.068551] GPR24: 7fa0a580 7fa0a570 1078fe00 1078fd70 1078fd70 00000170 0fdd3244 0000000d
[ 42.104696] NIP [0fd1f8e4] 0xfd1f8e4
[ 42.108225] LR [1004a688] 0x1004a688
[ 42.111753] --- interrupt: c00
[ 42.114768] Instruction dump:
[ 42.117698] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.125443] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.133195] ---[ end trace d35616f22ab2100c ]---
Adding the missing #ifdef is not good because gdb doesn't like getting
an error when getting registers.
Instead, make ptrace return 0s when CONFIG_PPC_FPU_REGS is not set.
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9121a44a2d50ba1af18d8aa5ada06c9a3bea8afd.1617200085.git.christophe.leroy@csgroup.eu
|
| H A D | ptrace-decl.h | 3618250c Wed Mar 31 09:14:58 CDT 2021 Christophe Leroy <christophe.leroy@csgroup.eu> powerpc/ptrace: Don't return error when getting/setting FP regs without CONFIG_PPC_FPU_REGS
An #ifdef CONFIG_PPC_FPU_REGS is missing in arch_ptrace() leading
to the following Oops because [REGSET_FPR] entry is not initialised in
native_regsets[].
[ 41.917608] BUG: Unable to handle kernel instruction fetch
[ 41.922849] Faulting instruction address: 0xff8fd228
[ 41.927760] Oops: Kernel access of bad area, sig: 11 [#1]
[ 41.933089] BE PAGE_SIZE=4K PREEMPT CMPC885
[ 41.940753] Modules linked in:
[ 41.943768] CPU: 0 PID: 366 Comm: gdb Not tainted 5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty #4835
[ 41.952800] NIP: ff8fd228 LR: c004d9e0 CTR: ff8fd228
[ 41.957790] REGS: caae9df0 TRAP: 0400 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 41.966741] MSR: 40009032 <EE,ME,IR,DR,RI> CR: 82004248 XER: 20000000
[ 41.973540]
[ 41.973540] GPR00: c004d9b4 caae9eb0 c1b64f60 c1b64520 c0713cd4 caae9eb8 c1bacdfc 00000004
[ 41.973540] GPR08: 00000200 ff8fd228 c1bac700 00001032 28004242 1061aaf4 00000001 106d64a0
[ 41.973540] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 41.973540] GPR24: 7fa0a580 7fa0a570 c1bacc00 c1b64520 c1bacc00 caae9ee8 00000108 c0713cd4
[ 42.009685] NIP [ff8fd228] 0xff8fd228
[ 42.013300] LR [c004d9e0] __regset_get+0x100/0x124
[ 42.018036] Call Trace:
[ 42.020443] [caae9eb0] [c004d9b4] __regset_get+0xd4/0x124 (unreliable)
[ 42.026899] [caae9ee0] [c004da94] copy_regset_to_user+0x5c/0xb0
[ 42.032751] [caae9f10] [c002f640] sys_ptrace+0xe4/0x588
[ 42.037915] [caae9f30] [c0011010] ret_from_syscall+0x0/0x28
[ 42.043422] --- interrupt: c00 at 0xfd1f8e4
[ 42.047553] NIP: 0fd1f8e4 LR: 1004a688 CTR: 00000000
[ 42.052544] REGS: caae9f40 TRAP: 0c00 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 42.061494] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 48004442 XER: 00000000
[ 42.068551]
[ 42.068551] GPR00: 0000001a 7fa0a040 77dad7e0 0000000e 00000170 00000000 7fa0a078 00000004
[ 42.068551] GPR08: 00000000 108deb88 108dda40 106d6010 44004442 1061aaf4 00000001 106d64a0
[ 42.068551] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 42.068551] GPR24: 7fa0a580 7fa0a570 1078fe00 1078fd70 1078fd70 00000170 0fdd3244 0000000d
[ 42.104696] NIP [0fd1f8e4] 0xfd1f8e4
[ 42.108225] LR [1004a688] 0x1004a688
[ 42.111753] --- interrupt: c00
[ 42.114768] Instruction dump:
[ 42.117698] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.125443] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.133195] ---[ end trace d35616f22ab2100c ]---
Adding the missing #ifdef is not good because gdb doesn't like getting
an error when getting registers.
Instead, make ptrace return 0s when CONFIG_PPC_FPU_REGS is not set.
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9121a44a2d50ba1af18d8aa5ada06c9a3bea8afd.1617200085.git.christophe.leroy@csgroup.eu
|
| H A D | ptrace-view.c | 3618250c Wed Mar 31 09:14:58 CDT 2021 Christophe Leroy <christophe.leroy@csgroup.eu> powerpc/ptrace: Don't return error when getting/setting FP regs without CONFIG_PPC_FPU_REGS
An #ifdef CONFIG_PPC_FPU_REGS is missing in arch_ptrace() leading
to the following Oops because [REGSET_FPR] entry is not initialised in
native_regsets[].
[ 41.917608] BUG: Unable to handle kernel instruction fetch
[ 41.922849] Faulting instruction address: 0xff8fd228
[ 41.927760] Oops: Kernel access of bad area, sig: 11 [#1]
[ 41.933089] BE PAGE_SIZE=4K PREEMPT CMPC885
[ 41.940753] Modules linked in:
[ 41.943768] CPU: 0 PID: 366 Comm: gdb Not tainted 5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty #4835
[ 41.952800] NIP: ff8fd228 LR: c004d9e0 CTR: ff8fd228
[ 41.957790] REGS: caae9df0 TRAP: 0400 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 41.966741] MSR: 40009032 <EE,ME,IR,DR,RI> CR: 82004248 XER: 20000000
[ 41.973540]
[ 41.973540] GPR00: c004d9b4 caae9eb0 c1b64f60 c1b64520 c0713cd4 caae9eb8 c1bacdfc 00000004
[ 41.973540] GPR08: 00000200 ff8fd228 c1bac700 00001032 28004242 1061aaf4 00000001 106d64a0
[ 41.973540] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 41.973540] GPR24: 7fa0a580 7fa0a570 c1bacc00 c1b64520 c1bacc00 caae9ee8 00000108 c0713cd4
[ 42.009685] NIP [ff8fd228] 0xff8fd228
[ 42.013300] LR [c004d9e0] __regset_get+0x100/0x124
[ 42.018036] Call Trace:
[ 42.020443] [caae9eb0] [c004d9b4] __regset_get+0xd4/0x124 (unreliable)
[ 42.026899] [caae9ee0] [c004da94] copy_regset_to_user+0x5c/0xb0
[ 42.032751] [caae9f10] [c002f640] sys_ptrace+0xe4/0x588
[ 42.037915] [caae9f30] [c0011010] ret_from_syscall+0x0/0x28
[ 42.043422] --- interrupt: c00 at 0xfd1f8e4
[ 42.047553] NIP: 0fd1f8e4 LR: 1004a688 CTR: 00000000
[ 42.052544] REGS: caae9f40 TRAP: 0c00 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty)
[ 42.061494] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 48004442 XER: 00000000
[ 42.068551]
[ 42.068551] GPR00: 0000001a 7fa0a040 77dad7e0 0000000e 00000170 00000000 7fa0a078 00000004
[ 42.068551] GPR08: 00000000 108deb88 108dda40 106d6010 44004442 1061aaf4 00000001 106d64a0
[ 42.068551] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538
[ 42.068551] GPR24: 7fa0a580 7fa0a570 1078fe00 1078fd70 1078fd70 00000170 0fdd3244 0000000d
[ 42.104696] NIP [0fd1f8e4] 0xfd1f8e4
[ 42.108225] LR [1004a688] 0x1004a688
[ 42.111753] --- interrupt: c00
[ 42.114768] Instruction dump:
[ 42.117698] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.125443] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
[ 42.133195] ---[ end trace d35616f22ab2100c ]---
Adding the missing #ifdef is not good because gdb doesn't like getting
an error when getting registers.
Instead, make ptrace return 0s when CONFIG_PPC_FPU_REGS is not set.
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9121a44a2d50ba1af18d8aa5ada06c9a3bea8afd.1617200085.git.christophe.leroy@csgroup.eu
|