/openbmc/linux/Documentation/devicetree/bindings/net/wireless/ |
H A D | qcom,ath10k.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Kalle Valo <kvalo@kernel.org> 18 - qcom,ath10k # SDIO-based devices 19 - qcom,ipq4019-wifi 20 - qcom,wcn3990-wifi # SNoC-based devices 25 reg-names: 27 - const: membase 33 interrupt-names: [all …]
|
/openbmc/linux/drivers/net/wireless/ath/ath10k/ |
H A D | rx_desc.h | 1 /* SPDX-License-Identifier: ISC */ 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 56 * A-MPDU frame but a stand alone MPDU. Interior MPDU in an 57 * A-MPDU shall have both first_mpdu and last_mpdu bits set to 84 * Set if packet is not a non-QoS data frame. Only set when 108 * Set if packet is U-APSD trigger. Key table will have bits 109 * per TID to indicate U-APSD trigger. 179 * Indicates that the MPDU was pre-maturely terminated 217 struct rx_frag_info_wcn3990 wcn3990; member [all …]
|
H A D | snoc.c | 1 // SPDX-License-Identifier: ISC 46 "vdd-0.8-cx-mx", 47 "vdd-1.8-xo", 48 "vdd-1.3-rfa", 49 "vdd-3.3-ch0", 50 "vdd-3.3-ch1", 136 /* CE0: host->target HTC control streams */ 145 /* CE1: target->host HTT + HTC control */ 154 /* CE2: target->host WMI */ 163 /* CE3: host->target WMI */ [all …]
|
H A D | hw.h | 1 /* SPDX-License-Identifier: ISC */ 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 133 /* WCN3990 1.0 definitions */ 135 #define WCN3990_HW_1_0_FW_DIR ATH10K_FW_DIR "/WCN3990/hw1.0" 142 #define ATH10K_FW_API2_FILE "firmware-2.bin" 143 #define ATH10K_FW_API3_FILE "firmware-3.bin" 146 #define ATH10K_FW_API4_FILE "firmware-4.bin" 149 #define ATH10K_FW_API5_FILE "firmware-5.bin" 151 /* the firmware-6.bin blob */ [all …]
|
/openbmc/openbmc/poky/meta/recipes-kernel/linux-firmware/ |
H A D | linux-firmware_20250109.bb | 9 Firmware-Abilis \ 10 & Firmware-adsp_sst \ 11 & Firmware-agere \ 12 & Firmware-amdgpu \ 13 & Firmware-amd-ucode \ 14 & Firmware-amlogic_vdec \ 15 & Firmware-amphion_vpu \ 16 & Firmware-atheros_firmware \ 17 & Firmware-atmel \ 18 & Firmware-broadcom_bcm43xx \ [all …]
|
/openbmc/linux/arch/arm64/boot/dts/qcom/ |
H A D | qcs404-evb.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 19 stdout-path = "serial0"; 22 vph_pwr: vph-pwr-regulator { 23 compatible = "regulator-fixed"; 24 regulator-name = "vph_pwr"; 25 regulator-always-on; 26 regulator-boot-on; [all …]
|
H A D | msm8998-clamshell.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 15 vph_pwr: vph-pwr-regulator { 16 compatible = "regulator-fixed"; 17 regulator-name = "vph_pwr"; 18 regulator-always-on; 19 regulator-boot-on; 27 compatible = "qcom,wcn3990-bt"; 29 vddio-supply = <&vreg_s4a_1p8>; 30 vddxo-supply = <&vreg_l7a_1p8>; 31 vddrf-supply = <&vreg_l17a_1p3>; [all …]
|
H A D | msm8998-mtp.dts | 1 // SPDX-License-Identifier: GPL-2.0 4 /dts-v1/; 13 compatible = "qcom,msm8998-mtp", "qcom,msm8998"; 14 chassis-type = "handset"; 16 qcom,board-id = <8 0>; 24 stdout-path = "serial0:115200n8"; 27 vph_pwr: vph-pwr-regulator { 28 compatible = "regulator-fixed"; 29 regulator-name = "vph_pwr"; 30 regulator-always-on; [all …]
|
H A D | sc7180-idp.dts | 1 // SPDX-License-Identifier: BSD-3-Clause 8 /dts-v1/; 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 14 #include "sc7180-firmware-tfa.dtsi" 20 compatible = "qcom,sc7180-idp", "qcom,sc7180"; 26 wifi0 = &wifi; 30 stdout-path = "serial0:115200n8"; 42 /delete-node/ &hyp_mem; [all …]
|
H A D | sdm845-xiaomi-beryllium-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 /dts-v1/; 5 #include <dt-bindings/leds/common.h> 6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 7 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 8 #include <dt-bindings/sound/qcom,q6afe.h> 9 #include <dt-bindings/sound/qcom,q6asm.h> 11 #include "sdm845-wcd9340.dtsi" 19 /delete-node/ &tz_mem; 20 /delete-node/ &adsp_mem; [all …]
|
H A D | sdm845-oneplus-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 /dts-v1/; 10 #include <dt-bindings/input/linux-event-codes.h> 11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 12 #include <dt-bindings/sound/qcom,q6afe.h> 13 #include <dt-bindings/sound/qcom,q6asm.h> 16 #include "sdm845-wcd9340.dtsi" 20 /delete-node/ &rmtfs_mem; 29 stdout-path = "serial0:115200n8"; 32 gpio-hall-sensor { [all …]
|
H A D | msm8998-oneplus-common.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 3 * OnePlus 5(T) (cheeseburger / dumpling) common device tree source based on msm8998-mtp.dtsi 9 /dts-v1/; 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 20 qcom,msm-id = <292 0x20001>; /* 8998 v2.1 */ 23 #address-cells = <2>; 24 #size-cells = <2>; 29 compatible = "simple-framebuffer"; 47 power-domains = <&mmcc MDSS_GDSC>; [all …]
|
H A D | sdm850-samsung-w737.dts | 1 // SPDX-License-Identifier: BSD-3-Clause 8 /dts-v1/; 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 11 #include <dt-bindings/input/gpio-keys.h> 12 #include <dt-bindings/input/input.h> 13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 14 #include <dt-bindings/sound/qcom,q6afe.h> 15 #include <dt-bindings/sound/qcom,q6asm.h> 17 #include "sdm845-wcd9340.dtsi" 24 /delete-node/ &qseecom_mem; [all …]
|
H A D | msm8998-fxtec-pro1.dts | 1 // SPDX-License-Identifier: BSD-3-Clause 7 /dts-v1/; 9 #include <dt-bindings/input/input.h> 10 #include <dt-bindings/leds/common.h> 11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 20 chassis-type = "handset"; 21 qcom,board-id = <0x02000b 0x10>; 29 * Until we hook up type-c detection, we 32 extcon_usb: extcon-usb { 33 compatible = "linux,extcon-usb-gpio"; [all …]
|
H A D | sdm845-shift-axolotl.dts | 1 // SPDX-License-Identifier: GPL-2.0 8 /dts-v1/; 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/leds/common.h> 12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 20 qcom,msm-id = <321 0x20001>; 21 qcom,board-id = <11 0>; 30 #address-cells = <2>; 31 #size-cells = <2>; 34 stdout-path = "serial0"; [all …]
|
H A D | sdm845-xiaomi-polaris.dts | 1 // SPDX-License-Identifier: BSD-3-Clause 7 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 12 #include <dt-bindings/input/linux-event-codes.h> 13 #include <dt-bindings/sound/qcom,q6afe.h> 14 #include <dt-bindings/sound/qcom,q6asm.h> 16 #include "sdm845-wcd9340.dtsi" 25 /delete-node/ &rmtfs_mem; [all …]
|
H A D | msm8998-xiaomi-sagit.dts | 1 // SPDX-License-Identifier: BSD-3-Clause 3 * Xiaomi Mi 6 (sagit) device tree source based on msm8998-mtp.dtsi 10 /dts-v1/; 16 #include <dt-bindings/input/input.h> 17 #include <dt-bindings/leds/common.h> 18 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 24 /delete-node/ &adsp_mem; 25 /delete-node/ &mpss_mem; 26 /delete-node/ &venus_mem; 27 /delete-node/ &mba_mem; [all …]
|
H A D | sdm850-lenovo-yoga-c630.dts | 1 // SPDX-License-Identifier: BSD-3-Clause 8 /dts-v1/; 10 #include <dt-bindings/input/gpio-keys.h> 11 #include <dt-bindings/input/input.h> 12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 13 #include <dt-bindings/sound/qcom,q6afe.h> 14 #include <dt-bindings/sound/qcom,q6asm.h> 16 #include "sdm845-wcd9340.dtsi" 24 /delete-node/ &ipa_fw_mem; 25 /delete-node/ &ipa_gsi_mem; [all …]
|
H A D | sdm845-cheza.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 8 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 21 wifi0 = &wifi; 25 stdout-path = "serial0:115200n8"; 29 compatible = "pwm-backlight"; 31 enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; 32 power-supply = <&ppvar_sys>; 33 pinctrl-names = "default"; 34 pinctrl-0 = <&ap_edp_bklten>; [all …]
|
H A D | qcm2290.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 8 #include <dt-bindings/clock/qcom,gcc-qcm2290.h> 9 #include <dt-bindings/clock/qcom,rpmcc.h> 10 #include <dt-bindings/dma/qcom-gpi.h> 11 #include <dt-bindings/firmware/qcom,scm.h> 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/interrupt-controller/arm-gic.h> 14 #include <dt-bindings/power/qcom-rpmpd.h> 17 interrupt-parent = <&intc>; 19 #address-cells = <2>; [all …]
|
H A D | sdm845-db845c.dts | 1 // SPDX-License-Identifier: GPL-2.0 6 /dts-v1/; 8 #include <dt-bindings/leds/common.h> 9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h> 11 #include <dt-bindings/sound/qcom,q6afe.h> 12 #include <dt-bindings/sound/qcom,q6asm.h> 14 #include "sdm845-wcd9340.dtsi" 21 qcom,msm-id = <341 0x20001>; 22 qcom,board-id = <8 0>; [all …]
|
H A D | qcs404.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/clock/qcom,gcc-qcs404.h> 8 #include <dt-bindings/clock/qcom,turingcc-qcs404.h> 9 #include <dt-bindings/clock/qcom,rpmcc.h> 10 #include <dt-bindings/power/qcom-rpmpd.h> 11 #include <dt-bindings/thermal/thermal.h> 14 interrupt-parent = <&intc>; 16 #address-cells = <2>; 17 #size-cells = <2>; [all …]
|
H A D | sm6375.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 6 #include <dt-bindings/clock/qcom,rpmcc.h> 7 #include <dt-bindings/clock/qcom,sm6375-gcc.h> 8 #include <dt-bindings/clock/qcom,sm6375-gpucc.h> 9 #include <dt-bindings/dma/qcom-gpi.h> 10 #include <dt-bindings/firmware/qcom,scm.h> 11 #include <dt-bindings/interconnect/qcom,osm-l3.h> 12 #include <dt-bindings/interrupt-controller/arm-gic.h> 13 #include <dt-bindings/mailbox/qcom-ipcc.h> 14 #include <dt-bindings/power/qcom-rpmpd.h> [all …]
|
H A D | sm6350.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 7 #include <dt-bindings/clock/qcom,dispcc-sm6350.h> 8 #include <dt-bindings/clock/qcom,gcc-sm6350.h> 9 #include <dt-bindings/clock/qcom,gpucc-sm6350.h> 10 #include <dt-bindings/clock/qcom,rpmh.h> 11 #include <dt-bindings/clock/qcom,sm6350-camcc.h> 12 #include <dt-bindings/dma/qcom-gpi.h> 13 #include <dt-bindings/gpio/gpio.h> 14 #include <dt-bindings/interconnect/qcom,icc.h> 15 #include <dt-bindings/interconnect/qcom,osm-l3.h> [all …]
|
H A D | msm8998.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 4 #include <dt-bindings/interrupt-controller/arm-gic.h> 5 #include <dt-bindings/clock/qcom,gcc-msm8998.h> 6 #include <dt-bindings/clock/qcom,gpucc-msm8998.h> 7 #include <dt-bindings/clock/qcom,mmcc-msm8998.h> 8 #include <dt-bindings/clock/qcom,rpmcc.h> 9 #include <dt-bindings/power/qcom-rpmpd.h> 10 #include <dt-bindings/gpio/gpio.h> 13 interrupt-parent = <&intc>; 15 qcom,msm-id = <292 0x0>; [all …]
|