/openbmc/linux/Documentation/devicetree/bindings/mfd/ |
H A D | tps65910.txt | 4 - compatible: "ti,tps65910" or "ti,tps65911" 5 - reg: I2C slave address 6 - interrupts: the interrupt outputs of the controller 7 - #gpio-cells: number of cells to describe a GPIO, this should be 2. 10 - gpio-controller: mark the device as a GPIO controller 11 - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. 14 Documentation/devicetree/bindings/interrupt-controller/interrupts.txt 15 - regulators: This is the list of child nodes that specify the regulator 20 The regulator is matched with the regulator-compatible. 22 The valid regulator-compatible values are: [all …]
|
H A D | rockchip,rk818.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Chris Zhong <zyw@rock-chips.com> 11 - Zhang Qing <zhangqing@rock-chips.com> 20 - rockchip,rk818 28 '#clock-cells': 30 See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. 33 clock-output-names: 38 rockchip,system-power-controller: [all …]
|
H A D | rockchip,rk809.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Chris Zhong <zyw@rock-chips.com> 11 - Zhang Qing <zhangqing@rock-chips.com> 20 - rockchip,rk809 28 '#clock-cells': 30 See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. 34 clock-output-names: 38 rockchip,system-power-controller: [all …]
|
H A D | rockchip,rk817.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Chris Zhong <zyw@rock-chips.com> 11 - Zhang Qing <zhangqing@rock-chips.com> 21 - rockchip,rk817 29 '#clock-cells': 31 See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. 35 clock-output-names: 39 rockchip,system-power-controller: [all …]
|
H A D | rockchip,rk806.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Sebastian Reichel <sebastian.reichel@collabora.com> 19 - rockchip,rk806 27 gpio-controller: true 29 '#gpio-cells': 32 vcc1-supply: 34 The input supply for dcdc-reg1. 36 vcc2-supply: [all …]
|
H A D | rockchip,rk808.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Chris Zhong <zyw@rock-chips.com> 11 - Zhang Qing <zhangqing@rock-chips.com> 20 - rockchip,rk808 28 '#clock-cells': 30 See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. 33 clock-output-names: 38 rockchip,system-power-controller: [all …]
|
/openbmc/linux/arch/arm/boot/dts/rockchip/ |
H A D | rk3288-phycore-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Device tree file for Phytec phyCORE-RK3288 SoM 8 #include <dt-bindings/net/ti-dp83867.h> 13 compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288"; 29 ext_gmac: external-gmac-clock { 30 compatible = "fixed-clock"; 31 #clock-cells = <0>; 32 clock-frequency = <125000000>; 33 clock-output-names = "ext_gmac"; 36 leds: user-leds { [all …]
|
H A D | rk3066a-marsboard.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 11 compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; 22 vdd_log: vdd-log { 23 compatible = "pwm-regulator"; 25 regulator-name = "vdd_log"; 26 regulator-min-microvolt = <1200000>; 27 regulator-max-microvolt = <1200000>; 28 regulator-always-on; 29 voltage-table = <1000000 100>, [all …]
|
H A D | rk3288-evb-rk808.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 4 #include "rk3288-evb.dtsi" 8 compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; 12 clock-frequency = <400000>; 17 interrupt-parent = <&gpio0>; 19 pinctrl-names = "default"; 20 pinctrl-0 = <&pmic_int &global_pwroff>; 21 rockchip,system-power-controller; 22 wakeup-source; [all …]
|
H A D | rk3188-px3-evb.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com> 6 /dts-v1/; 7 #include <dt-bindings/input/input.h> 11 model = "Rockchip PX3-EVB"; 12 compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; 20 stdout-path = "serial2:115200n8"; 28 gpio-keys { 29 compatible = "gpio-keys"; 32 key-power { [all …]
|
H A D | rk3288-vmarc-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/pinctrl/rockchip.h> 12 compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288"; 14 vccio_flash: vccio-flash-regulator { 15 compatible = "regulator-fixed"; 16 regulator-name = "vccio_flash"; 17 regulator-min-microvolt = <1800000>; 18 regulator-max-microvolt = <1800000>; 19 vin-supply = <&vcc_io>; [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | rk3288-phycore-som.dtsi | 2 * Device tree file for Phytec phyCORE-RK3288 SoM 6 * This file is dual-licensed: you can use it either under the terms 45 #include <dt-bindings/net/ti-dp83867.h> 50 compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288"; 67 ext_gmac: external-gmac-clock { 68 compatible = "fixed-clock"; 69 #clock-cells = <0>; 70 clock-frequency = <125000000>; 71 clock-output-names = "ext_gmac"; 75 compatible = "rockchip,rk3288-io-voltage-domain"; [all …]
|
H A D | rk3368-lion.dts | 1 // SPDX-License-Identifier: GPL-2.0+ OR X11 6 /dts-v1/; 8 #include "rk3368-lion-u-boot.dtsi" 9 #include <dt-bindings/input/input.h> 12 model = "Theobroma Systems RK3368-uQ7 SoM"; 13 compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368"; 25 ext_gmac: gmac-clk { 26 compatible = "fixed-clock"; 27 clock-frequency = <125000000>; 28 clock-output-names = "ext_gmac"; [all …]
|
H A D | rk3368-sheep.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /dts-v1/; 8 #include <dt-bindings/input/input.h> 15 stdout-path = "serial2:115200n8"; 23 ext_gmac: gmac-clk { 24 compatible = "fixed-clock"; 25 clock-frequency = <125000000>; 26 clock-output-names = "ext_gmac"; 27 #clock-cells = <0>; 30 ir: ir-receiver { [all …]
|
H A D | tegra30-apalis.dts | 1 /dts-v1/; 10 stdout-path = &uarta; 35 pcie-controller@00003000 { 37 avdd-pexa-supply = <&vdd2_reg>; 38 vdd-pexa-supply = <&vdd2_reg>; 39 avdd-pexb-supply = <&vdd2_reg>; 40 vdd-pexb-supply = <&vdd2_reg>; 41 avdd-pex-pll-supply = <&vdd2_reg>; 42 avdd-plle-supply = <&ldo6_reg>; 43 vddio-pex-ctl-supply = <&sys_3v3_reg>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | am3517-craneboard.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ 7 /dts-v1/; 13 compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3"; 21 compatible = "regulator-fixed"; 22 regulator-name = "vbat"; 23 regulator-min-microvolt = <5000000>; 24 regulator-max-microvolt = <5000000>; 25 regulator-boot-on; 38 clock-frequency = <2600000>; [all …]
|
H A D | am335x-igep0033.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x 5 * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz 8 /dts-v1/; 11 #include <dt-bindings/interrupt-controller/irq.h> 16 cpu0-supply = <&vdd1_reg>; 26 pinctrl-names = "default"; 27 pinctrl-0 = <&leds_pins>; 29 compatible = "gpio-leds"; 34 default-state = "on"; [all …]
|
/openbmc/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 #include <dt-bindings/interrupt-controller/arm-gic.h> 4 #include <dt-bindings/gpio/gpio.h> 13 #interrupt-cells = <2>; 14 interrupt-controller; 15 wakeup-source; 17 ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; 18 ti,system-power-controller; 19 ti,sleep-keep-ck32k; 20 ti,sleep-enable; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/rockchip/ |
H A D | px30-engicam-px30-core.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/pinctrl/rockchip.h> 13 compatible = "engicam,px30-core", "rockchip,px30"; 21 cpu-supply = <&vdd_arm>; 25 cpu-supply = <&vdd_arm>; 29 cpu-supply = <&vdd_arm>; 33 cpu-supply = <&vdd_arm>; 37 cap-mmc-highspeed; 38 mmc-hs200-1_8v; [all …]
|
H A D | rk3368-px5-evb.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include <dt-bindings/input/input.h> 12 compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; 20 stdout-path = "serial4:115200n8"; 28 keys: gpio-keys { 29 compatible = "gpio-keys"; 30 pinctrl-names = "default"; 31 pinctrl-0 = <&pwr_key>; 33 key-power { [all …]
|
H A D | rk3368-geekbox.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include <dt-bindings/input/input.h> 19 stdout-path = "serial2:115200n8"; 27 ext_gmac: gmac-clk { 28 compatible = "fixed-clock"; 29 clock-frequency = <125000000>; 30 clock-output-names = "ext_gmac"; 31 #clock-cells = <0>; 34 ir: ir-receiver { [all …]
|
H A D | rk3368-lion.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 15 stdout-path = "serial0:115200n8"; 18 ext_gmac: gmac-clk { 19 compatible = "fixed-clock"; 20 clock-frequency = <125000000>; 21 clock-output-names = "ext_gmac"; 22 #clock-cells = <0>; 26 compatible = "i2c-mux-gpio"; 27 #address-cells = <1>; [all …]
|
H A D | px30-ringneck.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include <dt-bindings/leds/common.h> 18 emmc_pwrseq: emmc-pwrseq { 19 compatible = "mmc-pwrseq-emmc"; 20 pinctrl-0 = <&emmc_reset>; 21 pinctrl-names = "default"; 22 reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; 26 compatible = "gpio-leds"; 27 pinctrl-names = "default"; [all …]
|
H A D | rk3588-evb1-v10.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/pinctrl/rockchip.h> 15 compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588"; 23 stdout-path = "serial2:1500000n8"; 27 compatible = "pwm-backlight"; 28 power-supply = <&vcc12v_dcin>; 32 vcc12v_dcin: vcc12v-dcin-regulator { 33 compatible = "regulator-fixed"; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/amlogic/ |
H A D | meson-g12b-odroid-go-ultra.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include "meson-g12b-s922x.dtsi" 9 #include <dt-bindings/input/input.h> 10 #include <dt-bindings/leds/common.h> 11 #include <dt-bindings/gpio/meson-g12a-gpio.h> 12 #include <dt-bindings/sound/meson-g12a-toacodec.h> 13 #include <dt-bindings/sound/meson-g12a-tohdmitx.h> 16 compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b"; 17 model = "Hardkernel ODROID-GO-Ultra"; [all …]
|