Home
last modified time | relevance | path

Searched +full:usb2 +full:- +full:phy1 (Results 1 – 25 of 55) sorted by relevance

123

/openbmc/linux/Documentation/devicetree/bindings/usb/
H A Damlogic,meson-g12a-usb-ctrl.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/usb/amlogic,meson-g12a-usb-ctrl.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Neil Armstrong <neil.armstrong@linaro.org>
14 The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
15 in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode
18 A glue connects the DWC3 core to USB2 PHYs and optionally to an USB3 PHY.
20 One of the USB2 PHYs can be re-routed in peripheral mode to a DWC2 USB IP.
25 The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
[all …]
/openbmc/linux/arch/powerpc/boot/dts/fsl/
H A Dp1020utm-pc.dtsi2 * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
64 /* 512KB for u-boot Bootloader Image */
65 /* 512KB for u-boot Environment Variables */
67 label = "NOR U-Boot Image";
68 read-only;
[all …]
H A Dp1020mbg-pc.dtsi2 * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
66 label = "NOR Vitesse-7385 Firmware";
67 read-only;
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
[all …]
H A Dp1020rdb-pc.dtsi2 * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR Vitesse-7385 Firmware";
49 read-only;
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
[all …]
H A Dp1025rdb.dtsi2 * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR Vitesse-7385 Firmware";
49 read-only;
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
[all …]
H A Dp1020rdb.dtsi2 * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
4 * Copyright 2011-2012 Freescale Semiconductor Inc.
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
48 label = "NOR (RO) Vitesse-7385 Firmware";
49 read-only;
56 read-only;
[all …]
/openbmc/linux/arch/arm64/boot/dts/amlogic/
H A Dmeson-g12b-s922x-khadas-vim3.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b-s922x.dtsi"
11 #include "meson-khadas-vim3.dtsi"
12 #include "meson-g12b-khadas-vim3.dtsi"
19 * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
39 phy-names = "usb2-phy0", "usb2-phy1";
H A Dmeson-g12b-a311d-khadas-vim3.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b-a311d.dtsi"
11 #include "meson-khadas-vim3.dtsi"
12 #include "meson-g12b-khadas-vim3.dtsi"
19 * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential
39 phy-names = "usb2-phy0", "usb2-phy1";
H A Dmeson-sm1-odroid-hc4.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-sm1-odroid.dtsi"
11 compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
12 model = "Hardkernel ODROID-HC4";
19 fan0: pwm-fan {
20 compatible = "pwm-fan";
21 #cooling-cells = <2>;
22 cooling-levels = <0 120 170 220>;
27 compatible = "gpio-leds";
[all …]
H A Dmeson-sm1-khadas-vim3l.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "meson-sm1.dtsi"
10 #include "meson-khadas-vim3.dtsi"
11 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
17 vddcpu: regulator-vddcpu {
21 compatible = "pwm-regulator";
23 regulator-name = "VDDCPU";
24 regulator-min-microvolt = <690000>;
25 regulator-max-microvolt = <1050000>;
[all …]
H A Dmeson-gxm.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 #include "meson-gxl.dtsi"
10 compatible = "amlogic,meson-gxm";
13 cpu-map {
46 capacity-dmips-mhz = <1024>;
50 capacity-dmips-mhz = <1024>;
54 capacity-dmips-mhz = <1024>;
58 capacity-dmips-mhz = <1024>;
63 compatible = "arm,cortex-a53";
65 enable-method = "psci";
[all …]
/openbmc/linux/drivers/usb/dwc3/
H A Ddwc3-meson-g12a.c1 // SPDX-License-Identifier: GPL-2.0
11 * - Control registers for each USB2 Ports
12 * - Control registers for the USB PHY layer
13 * - SuperSpeed PHY can be enabled only if port is used
14 * - Dynamic OTG switching with ID change interrupt
33 /* USB2 Ports Control Registers, offsets are per-port */
120 "usb2-phy0", "usb2-phy1", "usb2-phy2",
124 "usb2-phy0", "usb2-phy1", "usb3-phy0",
133 * correctly when only the "usb2-phy1" phy is specified on-par with the
137 "usb2-phy0", "usb2-phy1"
[all …]
/openbmc/linux/Documentation/devicetree/bindings/soc/imx/
H A Dfsl,imx8mp-hsio-blk-ctrl.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX8MP HSIO blk-ctrl
10 - Lucas Stach <l.stach@pengutronix.de>
13 The i.MX8MP HSIO blk-ctrl is a top-level peripheral providing access to
14 the NoC and ensuring proper power sequencing of the high-speed IO
20 - const: fsl,imx8mp-hsio-blk-ctrl
21 - const: syscon
[all …]
/openbmc/u-boot/arch/arm/dts/
H A Dsun4i-a10-pcduino.dts5 * This file is dual-licensed: you can use it either under the terms
44 /dts-v1/;
45 #include "sun4i-a10.dtsi"
46 #include "sunxi-common-regulators.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/input/input.h>
53 compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
60 stdout-path = "serial0:115200n8";
64 compatible = "gpio-leds";
77 gpio-keys {
[all …]
H A Dstm32429i-eval.dts1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2015, STMicroelectronics - All Rights Reserved
7 /dts-v1/;
9 #include "stm32f429-pinctrl.dtsi"
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/gpio/gpio.h>
14 model = "STMicroelectronics STM32429i-EVAL board";
15 compatible = "st,stm32429i-eval", "st,stm32f429";
19 stdout-path = "serial0:115200n8";
31 clk_ext_camera: clk-ext-camera {
[all …]
H A Darmada-3720-turris-mox.dts1 // SPDX-License-Identifier: GPL-2.0+ or X11
6 * Based on armada-3720-espressobin.dts by:
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
11 /dts-v1/;
13 #include <dt-bindings/gpio/gpio.h>
14 #include "armada-372x.dtsi"
18 compatible = "cznic,turris-mox", "marvell,armada3720",
22 stdout-path = "serial0:115200n8";
38 compatible = "regulator-fixed";
39 regulator-name = "usb3-vbus";
[all …]
H A Dr8a7790-lager.dts1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2013-2014 Renesas Solutions Corp.
7 * Copyright (C) 2015-2016 Renesas Electronics Corporation
11 * SSI-AK4643
38 /dts-v1/;
40 #include <dt-bindings/gpio/gpio.h>
41 #include <dt-bindings/input/input.h>
60 stdout-path = "serial0:115200n8";
74 #address-cells = <1>;
75 #size-cells = <1>;
[all …]
H A Darmada-3720-espressobin.dts6 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * This file is dual-licensed: you can use it either under the terms
48 /dts-v1/;
50 #include "armada-372x.dtsi"
54 compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
57 stdout-path = "serial0:115200n8";
73 max-lanes = <3>;
75 phy-type = <PHY_TYPE_PEX0>;
76 phy-speed = <PHY_SPEED_2_5G>;
79 phy1 {
[all …]
/openbmc/linux/arch/arm/boot/dts/allwinner/
H A Dsun4i-a10-pcduino.dts5 * This file is dual-licensed: you can use it either under the terms
44 /dts-v1/;
45 #include "sun4i-a10.dtsi"
46 #include "sunxi-common-regulators.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/input/input.h>
53 compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
60 stdout-path = "serial0:115200n8";
64 compatible = "gpio-leds";
66 led-0 {
[all …]
/openbmc/u-boot/doc/device-tree-bindings/phy/
H A Dsun4i-usb-phy.txt2 -----------------------
5 - compatible : should be one of
6 * allwinner,sun4i-a10-usb-phy
7 * allwinner,sun5i-a13-usb-phy
8 * allwinner,sun6i-a31-usb-phy
9 * allwinner,sun7i-a20-usb-phy
10 * allwinner,sun8i-a23-usb-phy
11 * allwinner,sun8i-a33-usb-phy
12 * allwinner,sun8i-a83t-usb-phy
13 * allwinner,sun8i-h3-usb-phy
[all …]
/openbmc/linux/arch/powerpc/boot/dts/
H A Dasp834x-redboot.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
8 /dts-v1/;
12 compatible = "analogue-and-micro,asp8347e";
13 #address-cells = <1>;
14 #size-cells = <1>;
24 #address-cells = <1>;
25 #size-cells = <0>;
30 d-cache-line-size = <32>;
31 i-cache-line-size = <32>;
32 d-cache-size = <32768>;
[all …]
/openbmc/linux/arch/arm64/boot/dts/marvell/
H A Darmada-3720-db.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 * (DB-88F3720-DDR3)
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
14 /dts-v1/;
16 #include <dt-bindings/gpio/gpio.h>
17 #include "armada-372x.dtsi"
20 model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
21 compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700";
24 stdout-path = "serial0:115200n8";
32 exp_usb3_vbus: usb3-vbus {
[all …]
/openbmc/linux/arch/arm/boot/dts/ti/omap/
H A Dam437x-sbc-t43.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
6 #include "am437x-cm-t43.dts"
7 #include "compulab-sb-som.dtsi"
10 model = "CompuLab CM-T43 on SB-SOM-T43";
11 compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
19 mmc1_pins: mmc1-pins {
20 pinctrl-single,pins = <
32 dss_pinctrl_default: dss-pinctrl-default-pins {
33 pinctrl-single,pins = <
[all …]
/openbmc/linux/arch/arm/boot/dts/renesas/
H A Dr8a7790-lager.dts1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 2013-2014 Renesas Solutions Corp.
7 * Copyright (C) 2015-2016 Renesas Electronics Corporation
11 * SSI-AK4643
38 /dts-v1/;
40 #include <dt-bindings/gpio/gpio.h>
41 #include <dt-bindings/input/input.h>
63 stdout-path = "serial0:115200n8";
77 #address-cells = <1>;
78 #size-cells = <1>;
[all …]
/openbmc/linux/arch/arm/boot/dts/st/
H A Dstm32429i-eval.dts2 * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
4 * This file is dual-licensed: you can use it either under the terms
22 * MA 02110-1301 USA
48 /dts-v1/;
50 #include "stm32f429-pinctrl.dtsi"
51 #include <dt-bindings/input/input.h>
52 #include <dt-bindings/gpio/gpio.h>
53 #include <dt-bindings/media/video-interfaces.h>
56 model = "STMicroelectronics STM32429i-EVAL board";
57 compatible = "st,stm32429i-eval", "st,stm32f429";
[all …]

123