/openbmc/linux/Documentation/devicetree/bindings/nvmem/ |
H A D | socionext,uniphier-efuse.yaml | 43 usb_rterm0: trim@54,4 { 47 usb_rterm1: trim@55,4 { 51 usb_rterm2: trim@58,4 { 55 usb_rterm3: trim@59,4 { 59 usb_sel_t0: trim@54,0 { 63 usb_sel_t1: trim@55,0 { 67 usb_sel_t2: trim@58,0 { 71 usb_sel_t3: trim@59,0 { 75 usb_hs_i0: trim@56,0 { 79 usb_hs_i2: trim@5a,0 {
|
/openbmc/linux/drivers/thermal/ |
H A D | imx8mm_thermal.c | 35 #define TRIM 0x3c macro 203 u32 trim[4] = { 0 }; in imx8mm_tmu_probe_set_calib_v2() local 217 memcpy(trim, buf, min(len, sizeof(trim))); in imx8mm_tmu_probe_set_calib_v2() 227 if (!trim[0] && !trim[1] && !trim[2] && !trim[3]) { in imx8mm_tmu_probe_set_calib_v2() 237 FIELD_GET(TRIM2_BUF_VERF_SEL_MASK, trim[0])) | in imx8mm_tmu_probe_set_calib_v2() 239 FIELD_GET(TRIM2_BUF_SLOP_SEL_MASK, trim[0])), in imx8mm_tmu_probe_set_calib_v2() 243 FIELD_GET(TRIM2_BJT_CUR_MASK, trim[0])) | in imx8mm_tmu_probe_set_calib_v2() 244 FIELD_PREP(TRIM_BGR_MASK, FIELD_GET(TRIM2_BGR_MASK, trim[0])) | in imx8mm_tmu_probe_set_calib_v2() 245 FIELD_PREP(TRIM_VLSB_MASK, FIELD_GET(TRIM2_VLSB_MASK, trim[0])) | in imx8mm_tmu_probe_set_calib_v2() 247 tmu->base + TRIM); in imx8mm_tmu_probe_set_calib_v2() [all …]
|
/openbmc/linux/fs/jfs/ |
H A D | jfs_discard.c | 20 * FUNCTION: TRIM the specified block range on device, if supported 54 * FUNCTION: attempt to discard (TRIM) all free blocks from the 76 * start: First Byte to trim in jfs_ioc_trim() 77 * len: number of Bytes to trim from start in jfs_ioc_trim() 100 * we trim all ag's within the range in jfs_ioc_trim()
|
/openbmc/openbmc/poky/scripts/ |
H A D | oe-trim-schemas | 27 print('oe-trim-schemas: error: the following arguments are required: schema\n' 28 'Usage: oe-trim-schemas schema\n\n' 29 'OpenEmbedded trim schemas - remove unneeded schema locale translations\n' 32 ' schema gconf schema file to trim\n')
|
/openbmc/linux/Documentation/ABI/testing/ |
H A D | sysfs-ata | 124 What: /sys/class/ata_device/devX[.Y].Z/trim 129 (RO) Shows the DSM TRIM mode currently used by the device. Valid 132 unsupported: Drive does not support DSM TRIM 134 unqueued: Drive supports unqueued DSM TRIM only 136 queued: Drive supports queued DSM TRIM 139 be buggy and only unqueued TRIM commands
|
/openbmc/u-boot/drivers/clk/ |
H A D | clk_pic32.c | 60 /* Reference Oscillator Trim Register Fields */ 173 u32 div, trim, v; in pic32_set_refclk() local 179 * rate = parent_rate / [2 * (div + (trim / 512))] in pic32_set_refclk() 183 trim = 0; in pic32_set_refclk() 190 trim = (frac >= REFO_TRIM_MAX) ? REFO_TRIM_MAX : (u32)frac; in pic32_set_refclk() 212 /* apply trim */ in pic32_set_refclk() 215 v |= (trim << REFO_TRIM_SHIFT); in pic32_set_refclk() 244 /* get trim */ in pic32_get_refclk() 265 * rate = parent_rate / [2 * (div + (trim / 512))] in pic32_get_refclk()
|
/openbmc/linux/arch/mips/boot/dts/cavium-octeon/ |
H A D | octeon_68xx.dts | 74 cavium,qlm-trim = "4,sgmii"; 83 cavium,qlm-trim = "4,sgmii"; 92 cavium,qlm-trim = "4,sgmii"; 101 cavium,qlm-trim = "4,sgmii"; 118 cavium,qlm-trim = "0,sgmii"; 127 cavium,qlm-trim = "0,sgmii"; 136 cavium,qlm-trim = "0,sgmii"; 145 cavium,qlm-trim = "0,sgmii"; 162 cavium,qlm-trim = "2,sgmii"; 171 cavium,qlm-trim = "2,sgmii"; [all …]
|
/openbmc/openbmc/meta-phosphor/recipes-phosphor/smbios/ |
H A D | smbios-mdr_git.bb | 18 PACKAGECONFIG[assoc-trim-path] = "-Dassoc-trim-path=enabled,-Dassoc-trim-path=disabled"
|
/openbmc/linux/Documentation/devicetree/bindings/phy/ |
H A D | qcom,qusb2-phy.yaml | 78 Phandle to nvmem cell that contains 'HS Tx trim' 114 qcom,hstx-trim-value: 146 qcom,hsdisc-trim-value: 178 qcom,hstx-trim-value: false 181 qcom,hsdisc-trim-value: false
|
H A D | phy-stm32-usbphyc.yaml | 122 st,trim-hs-current: 146 st,trim-hs-impedance: 257 st,trim-hs-current = <15>; 258 st,trim-hs-impedance = <1>; 275 st,trim-hs-current = <15>; 276 st,trim-hs-impedance = <1>;
|
/openbmc/openbmc/meta-openembedded/meta-filesystems/recipes-utils/btrfsmaintenance/ |
H A D | btrfsmaintenance_0.5.bb | 4 to automate a few maintenance tasks. This means the scrub, balance, trim \ 50 btrfs-trim.timer \ 51 btrfs-trim.service \
|
/openbmc/linux/drivers/hwmon/ |
H A D | bt1-pvt.h | 70 * @PVT_TRIM_MIN: Minimal temperature sensor trim value. 71 * @PVT_TRIM_MAX: Maximal temperature sensor trim value. 72 * @PVT_TRIM_DEF: Default temperature sensor trim value (set a proper value 74 * @PVT_TRIM_TEMP: Maximum temperature encoded by the trim factor. 75 * @PVT_TRIM_STEP: Temperature stride corresponding to the trim value.
|
H A D | bt1-pvt.c | 130 * getting back enabled. The same concerns the temperature trim and 152 static inline void pvt_set_trim(struct pvt_hwmon *pvt, u32 trim) in pvt_set_trim() argument 156 trim = FIELD_PREP(PVT_CTRL_TRIM_MASK, trim); in pvt_set_trim() 160 trim | old); in pvt_set_trim() 220 * Lock the interface mutex to serialize trim, timeouts and alarm in pvt_soft_isr() 624 u32 trim; in pvt_write_trim() local 628 * Serialize trim update, since a part of the register is changed and in pvt_write_trim() 635 trim = pvt_calc_trim(val); in pvt_write_trim() 636 pvt_set_trim(pvt, trim); in pvt_write_trim() 975 u32 trim, temp; in pvt_init_iface() local [all …]
|
/openbmc/linux/Documentation/admin-guide/ |
H A D | jfs.rst | 53 This enables/disables the use of discard/TRIM commands. 54 The discard/TRIM commands are sent to the underlying 59 a TRIM command to the block device is considered useful.
|
/openbmc/smbios-mdr/ |
H A D | meson.options | 23 'assoc-trim-path', 26 description: 'Trim one object path component from CPU and DIMM associations'
|
/openbmc/linux/scripts/ |
H A D | parse-maintainers.pl | 101 sub trim { subroutine 153 $line = $1 . ":\t" . trim($2) . "\n"; 158 $case = trim($lastline); 170 trim($lastline) eq "" or die ("Odd non-pattern line '$lastline' for '$case'");
|
/openbmc/linux/fs/ocfs2/ |
H A D | dlmglue.h | 72 u8 tf_success; /* trim is successful, or not */ 74 u64 tf_start; /* trim start offset in clusters */ 75 u64 tf_len; /* trim end offset in clusters */ 76 u64 tf_minlen; /* trim minimum contiguous free clusters */
|
/openbmc/linux/Documentation/devicetree/bindings/net/ieee802154/ |
H A D | at86rf230.txt | 15 - xtal-trim: u8 value for fine tuning the internal capacitance 26 xtal-trim = /bits/ 8 <0x06>;
|
/openbmc/linux/drivers/rtc/ |
H A D | rtc-rs5c372.c | 324 static int rs5c372_get_trim(struct i2c_client *client, int *osc, int *trim) in rs5c372_get_trim() argument 336 if (trim) { in rs5c372_get_trim() 337 dev_dbg(&client->dev, "%s: raw trim=%x\n", __func__, tmp); in rs5c372_get_trim() 350 *trim = tmp; in rs5c372_get_trim() 478 int err, osc, trim; in rs5c372_rtc_proc() local 480 err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim); in rs5c372_rtc_proc() 484 seq_printf(seq, "trim\t\t: %d\n", trim); in rs5c372_rtc_proc() 681 int err, trim; in rs5c372_sysfs_show_trim() local 683 err = rs5c372_get_trim(to_i2c_client(dev), NULL, &trim); in rs5c372_sysfs_show_trim() 687 return sprintf(buf, "%d\n", trim); in rs5c372_sysfs_show_trim() [all …]
|
H A D | rtc-x1205.c | 293 static int x1205_get_dtrim(struct i2c_client *client, int *trim) in x1205_get_dtrim() argument 320 *trim = 0; in x1205_get_dtrim() 323 *trim += 20; in x1205_get_dtrim() 326 *trim += 10; in x1205_get_dtrim() 329 *trim = -*trim; in x1205_get_dtrim() 334 static int x1205_get_atrim(struct i2c_client *client, int *trim) in x1205_get_atrim() argument 369 *trim = (atr * 250) + 11000; in x1205_get_atrim() 371 dev_dbg(&client->dev, "%s: real=%d\n", __func__, *trim); in x1205_get_atrim()
|
/openbmc/openbmc/poky/bitbake/lib/toaster/toastergui/static/js/ |
H A D | projecttopbar.js | 79 if (!newBuildTargetInput.val().trim()) { 86 selectedTarget = { name: newBuildTargetInput.val().trim() }; 101 libtoaster.updateProject(null, selectedTarget.name, newBuildTargetInput.val().trim(),
|
/openbmc/linux/Documentation/devicetree/bindings/mmc/ |
H A D | nvidia,tegra20-sdhci.yaml | 100 The DQS trim values are only used on controllers which support HS400 104 nvidia,default-trim: 108 nvidia,dqs-trim: 109 description: Specify DQS trim value for HS400 timing. 307 nvidia,default-trim = <0x4>;
|
/openbmc/linux/drivers/mmc/core/ |
H A D | quirks.h | 96 * secure trim can result in unrecoverable corruption due to a 117 * On Some Kingston eMMCs, performing trim can result in 126 * Micron MTFC4GACAJCN-1M supports TRIM but does not appear to support 134 * Kingston EMMC04G-M627 advertises TRIM but it does not seems to
|
/openbmc/linux/drivers/clk/microchip/ |
H A D | clk-core.c | 57 /* Reference Oscillator Trim Register Fields */ 299 /* fout = fin / [2 * {div + (trim / 512)}] in roclk_calc_rate() 300 * = fin * 512 / [1024 * div + 2 * trim] in roclk_calc_rate() 301 * = fin * 256 / (512 * div + trim) in roclk_calc_rate() 302 * = (fin << 8) / ((div << 9) + trim) in roclk_calc_rate() 368 /* get trim */ in roclk_recalc_rate() 482 u32 trim, rodiv, v; in roclk_set_rate_and_parent() local 486 roclk_calc_div_trim(rate, parent_rate, &rodiv, &trim); in roclk_set_rate_and_parent() 488 pr_debug("parent_rate = %lu, rate = %lu, div = %d, trim = %d\n", in roclk_set_rate_and_parent() 489 parent_rate, rate, rodiv, trim); in roclk_set_rate_and_parent() [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | uniphier-pxs3.dtsi | 413 usb_rterm0: trim@54,4 { 417 usb_rterm1: trim@55,4 { 421 usb_rterm2: trim@58,4 { 425 usb_rterm3: trim@59,4 { 429 usb_sel_t0: trim@54,0 { 433 usb_sel_t1: trim@55,0 { 437 usb_sel_t2: trim@58,0 { 441 usb_sel_t3: trim@59,0 { 445 usb_hs_i0: trim@56,0 { 449 usb_hs_i2: trim@5a,0 {
|