| /openbmc/phosphor-fan-presence/control/config_files/p10bmc/com.ibm.Hardware.Chassis.Model.Everest/ |
| H A D | groups.json | 57 "/xyz/openbmc_project/sensors/temperature/proc0_core0_0_temp",
58 "/xyz/openbmc_project/sensors/temperature/proc0_core0_1_temp",
59 "/xyz/openbmc_project/sensors/temperature/proc0_core1_0_temp",
60 "/xyz/openbmc_project/sensors/temperature/proc0_core1_1_temp",
61 "/xyz/openbmc_project/sensors/temperature/proc0_core2_0_temp",
62 "/xyz/openbmc_project/sensors/temperature/proc0_core2_1_temp",
63 "/xyz/openbmc_project/sensors/temperature/proc0_core3_0_temp",
64 "/xyz/openbmc_project/sensors/temperature/proc0_core3_1_temp",
65 "/xyz/openbmc_project/sensors/temperature/proc0_core4_0_temp",
66 "/xyz/openbmc_project/sensors/temperature/proc0_core4_1_temp",
[all …]
|
| /openbmc/phosphor-fan-presence/control/config_files/p10bmc/com.ibm.Hardware.Chassis.Model.Rainier4U/ |
| H A D | groups.json | 63 "/xyz/openbmc_project/sensors/temperature/proc0_core0_0_temp",
64 "/xyz/openbmc_project/sensors/temperature/proc0_core0_1_temp",
65 "/xyz/openbmc_project/sensors/temperature/proc0_core1_0_temp",
66 "/xyz/openbmc_project/sensors/temperature/proc0_core1_1_temp",
67 "/xyz/openbmc_project/sensors/temperature/proc0_core2_0_temp",
68 "/xyz/openbmc_project/sensors/temperature/proc0_core2_1_temp",
69 "/xyz/openbmc_project/sensors/temperature/proc0_core3_0_temp",
70 "/xyz/openbmc_project/sensors/temperature/proc0_core3_1_temp",
71 "/xyz/openbmc_project/sensors/temperature/proc0_core4_0_temp",
72 "/xyz/openbmc_project/sensors/temperature/proc0_core4_1_temp",
[all …]
|
| /openbmc/phosphor-fan-presence/control/config_files/p10bmc/com.ibm.Hardware.Chassis.Model.Rainier2U/ |
| H A D | groups.json | 69 "/xyz/openbmc_project/sensors/temperature/proc0_core0_0_temp",
70 "/xyz/openbmc_project/sensors/temperature/proc0_core0_1_temp",
71 "/xyz/openbmc_project/sensors/temperature/proc0_core1_0_temp",
72 "/xyz/openbmc_project/sensors/temperature/proc0_core1_1_temp",
73 "/xyz/openbmc_project/sensors/temperature/proc0_core2_0_temp",
74 "/xyz/openbmc_project/sensors/temperature/proc0_core2_1_temp",
75 "/xyz/openbmc_project/sensors/temperature/proc0_core3_0_temp",
76 "/xyz/openbmc_project/sensors/temperature/proc0_core3_1_temp",
77 "/xyz/openbmc_project/sensors/temperature/proc0_core4_0_temp",
78 "/xyz/openbmc_project/sensors/temperature/proc0_core4_1_temp",
[all …]
|
| /openbmc/phosphor-fan-presence/control/config_files/p10bmc/com.ibm.Hardware.Chassis.Model.Rainier1S4U/ |
| H A D | groups.json | 53 "/xyz/openbmc_project/sensors/temperature/proc0_core0_0_temp",
54 "/xyz/openbmc_project/sensors/temperature/proc0_core0_1_temp",
55 "/xyz/openbmc_project/sensors/temperature/proc0_core1_0_temp",
56 "/xyz/openbmc_project/sensors/temperature/proc0_core1_1_temp",
57 "/xyz/openbmc_project/sensors/temperature/proc0_core2_0_temp",
58 "/xyz/openbmc_project/sensors/temperature/proc0_core2_1_temp",
59 "/xyz/openbmc_project/sensors/temperature/proc0_core3_0_temp",
60 "/xyz/openbmc_project/sensors/temperature/proc0_core3_1_temp",
61 "/xyz/openbmc_project/sensors/temperature/proc0_core4_0_temp",
62 "/xyz/openbmc_project/sensors/temperature/proc0_core4_1_temp",
[all …]
|
| /openbmc/openbmc/meta-ibm/recipes-phosphor/inventory/phosphor-inventory-manager/ |
| H A D | associations.json | 246 "/xyz/openbmc_project/sensors/temperature/ambient",
247 "/xyz/openbmc_project/sensors/temperature/pcie",
267 "/xyz/openbmc_project/sensors/temperature/p0_vddr_temp",
268 "/xyz/openbmc_project/sensors/temperature/p0_vcs_temp",
269 "/xyz/openbmc_project/sensors/temperature/p0_vdd_temp",
270 "/xyz/openbmc_project/sensors/temperature/p0_vdn_temp",
271 "/xyz/openbmc_project/sensors/temperature/p1_vddr_temp",
272 "/xyz/openbmc_project/sensors/temperature/p1_vcs_temp",
273 "/xyz/openbmc_project/sensors/temperature/p1_vdd_temp",
274 "/xyz/openbmc_project/sensors/temperature/p1_vdn_temp",
[all …]
|
| /openbmc/openbmc/meta-ibm/recipes-phosphor/ipmi/phosphor-ipmi-config/ibm-ac-server/ |
| H A D | dcmi_sensors.json | 5 "dbus": "/xyz/openbmc_project/sensors/temperature/ambient",
12 "dbus": "/xyz/openbmc_project/sensors/temperature/pcie",
19 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core0_temp",
24 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core1_temp",
29 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core2_temp",
34 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core3_temp",
39 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core4_temp",
44 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core5_temp",
49 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core6_temp",
54 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core7_temp",
[all …]
|
| /openbmc/openbmc/meta-ibm/meta-romulus/recipes-phosphor/ipmi/phosphor-ipmi-config/ |
| H A D | dcmi_sensors.json | 3 … {"instance": 1, "dbus": "/xyz/openbmc_project/sensors/temperature/inlet_cpu", "record_id": 254}
6 {"instance": 1, "dbus": "/xyz/openbmc_project/sensors/temperature/outlet", "record_id": 253}
11 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core0_temp",
16 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core1_temp",
21 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core2_temp",
26 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core3_temp",
31 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core4_temp",
36 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core5_temp",
41 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core6_temp",
46 "dbus": "/xyz/openbmc_project/sensors/temperature/p0_core7_temp",
[all …]
|
| /openbmc/openbmc/meta-ampere/meta-mitchell/recipes-phosphor/sensors/phosphor-virtual-sensor/ |
| H A D | mtmitchell_virtual_sensor_config.json | 58 "SensorType": "temperature"
86 "SensorType": "temperature"
94 "SensorType": "temperature"
104 "SensorType":"temperature"
129 "SensorType": "temperature"
136 "SensorType": "temperature"
143 "SensorType": "temperature"
150 "SensorType": "temperature"
157 "SensorType": "temperature"
164 "SensorType": "temperature"
[all …]
|
| /openbmc/phosphor-fan-presence/control/config_files/p10bmc/com.ibm.Hardware.Chassis.Model.Bonnell/ |
| H A D | groups.json | 35 "/xyz/openbmc_project/sensors/temperature/proc0_core0_0_temp",
36 "/xyz/openbmc_project/sensors/temperature/proc0_core0_1_temp",
37 "/xyz/openbmc_project/sensors/temperature/proc0_core1_0_temp",
38 "/xyz/openbmc_project/sensors/temperature/proc0_core1_1_temp",
39 "/xyz/openbmc_project/sensors/temperature/proc0_core2_0_temp",
40 "/xyz/openbmc_project/sensors/temperature/proc0_core2_1_temp",
41 "/xyz/openbmc_project/sensors/temperature/proc0_core3_0_temp",
42 "/xyz/openbmc_project/sensors/temperature/proc0_core3_1_temp",
43 "/xyz/openbmc_project/sensors/temperature/proc0_core4_0_temp",
44 "/xyz/openbmc_project/sensors/temperature/proc0_core4_1_temp",
[all …]
|
| /openbmc/openbmc/meta-ibm/meta-romulus/recipes-phosphor/fans/phosphor-fan-control-events-config/ |
| H A D | events.yaml | 10 description: Group of ambient temperature sensors for zone 0
13 - /temperature/outlet
25 description: Group of core temperature sensors for zone 0
28 - /temperature/p0_core0_temp
29 - /temperature/p0_core1_temp
30 - /temperature/p0_core2_temp
31 - /temperature/p0_core3_temp
32 - /temperature/p0_core4_temp
33 - /temperature/p0_core5_temp
34 - /temperature/p0_core6_temp
[all …]
|
| /openbmc/openbmc/meta-ibm/recipes-phosphor/dbus/thermal-policy/ibm-ac-server/ |
| H A D | thermal-policy.yaml | 4 # have a temperature greater than 115 degrees Celcius.
14 path: /xyz/openbmc_project/sensors/temperature/p0_core0_temp
16 path: /xyz/openbmc_project/sensors/temperature/p0_core1_temp
18 path: /xyz/openbmc_project/sensors/temperature/p0_core2_temp
20 path: /xyz/openbmc_project/sensors/temperature/p0_core3_temp
22 path: /xyz/openbmc_project/sensors/temperature/p0_core4_temp
24 path: /xyz/openbmc_project/sensors/temperature/p0_core5_temp
26 path: /xyz/openbmc_project/sensors/temperature/p0_core6_temp
28 path: /xyz/openbmc_project/sensors/temperature/p0_core7_temp
30 path: /xyz/openbmc_project/sensors/temperature/p0_core8_temp
[all …]
|
| /openbmc/openbmc/meta-quanta/meta-gbs/recipes-phosphor/inventory/phosphor-inventory-manager/ |
| H A D | associations.json | 14 "/xyz/openbmc_project/sensors/temperature/nvme0"
31 "/xyz/openbmc_project/sensors/temperature/nvme1"
48 "/xyz/openbmc_project/sensors/temperature/nvme2"
65 "/xyz/openbmc_project/sensors/temperature/nvme3"
82 "/xyz/openbmc_project/sensors/temperature/nvme4"
99 "/xyz/openbmc_project/sensors/temperature/nvme5"
116 "/xyz/openbmc_project/sensors/temperature/nvme6"
133 "/xyz/openbmc_project/sensors/temperature/nvme7"
150 "/xyz/openbmc_project/sensors/temperature/nvme8"
167 "/xyz/openbmc_project/sensors/temperature/nvme9"
[all …]
|
| /openbmc/linux/Documentation/hwmon/ |
| H A D | nct6775.rst | 101 The chips support up to 25 temperature monitoring sources. Up to 6 of those are
102 direct temperature sensor inputs, the others are special sources such as PECI,
103 PCH, and SMBUS. Depending on the chip type, 2 to 6 of the temperature sources
110 The temperature sensor sources on all chips are configurable. The configured
111 source for each of the temperature sensors is provided in tempX_label.
114 either 1 degC or 0.5 degC, depending on the temperature source and
115 configuration. An alarm is triggered when the temperature gets higher than
116 the high limit; it stays on until the temperature falls below the hysteresis
134 In this mode, the chip attempts to keep the measured temperature in a
135 predefined temperature range. If the temperature goes out of range, fan
[all …]
|
| H A D | max1668.rst | 25 set; only two remote temperature inputs vs the four available on the other
34 temp1_input ro local (ambient) temperature
35 temp1_max rw local temperature maximum threshold for alarm
36 temp1_max_alarm ro local temperature maximum threshold alarm
37 temp1_min rw local temperature minimum threshold for alarm
38 temp1_min_alarm ro local temperature minimum threshold alarm
39 temp2_input ro remote temperature 1
40 temp2_max rw remote temperature 1 maximum threshold for alarm
41 temp2_max_alarm ro remote temperature 1 maximum threshold alarm
42 temp2_min rw remote temperature 1 minimum threshold for alarm
[all …]
|
| H A D | asc7621.rst | 27 specification. First enhancement is temperature reading resolution. We
42 data sheet. Our temperature reports and fan PWM outputs are very smooth
44 temperature reports. The smoother PWM output does not require user
49 outputs that are based on temperature limits. These are in 19h and 1Ah.
51 We offer flexible mapping of temperature readings to thermal zones. Any
52 temperature may be mapped to any zone, which has a default assignment
61 Both remote diode temperature readings may be given an offset value such
62 that the reported reading as well as the temperature used to determine
87 Using a 10-bit ADC, the aSC7621 measures the temperature of two remote diode
91 Using temperature information from these four zones, an automatic fan speed
[all …]
|
| H A D | max6639.rst | 22 temperature monitor with dual PWM fan speed controller. It can monitor its own
23 temperature and one external diode-connected transistor or two external
31 temp1_input R Temperature channel 1 input (0..150 C)
32 temp2_input R Temperature channel 2 input (0..150 C)
33 temp1_fault R Temperature channel 1 diode fault
34 temp2_fault R Temperature channel 2 diode fault
35 temp1_max RW Set THERM temperature for input 1
37 temp2_max RW Set THERM temperature for input 2
38 temp1_crit RW Set ALERT temperature for input 1
39 temp2_crit RW Set ALERT temperature for input 2
[all …]
|
| /openbmc/openbmc/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-events-config/witherspoon/ |
| H A D | events.yaml | 29 description: Group of ambient temperature sensors for zone 0
32 - /temperature/ambient
44 description: Group of core temperature sensors for zone 0
47 - /temperature/p0_core0_temp
48 - /temperature/p0_core1_temp
49 - /temperature/p0_core2_temp
50 - /temperature/p0_core3_temp
51 - /temperature/p0_core4_temp
52 - /temperature/p0_core5_temp
53 - /temperature/p0_core6_temp
[all …]
|
| /openbmc/openbmc/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/inventory/phosphor-inventory-manager/ |
| H A D | associations.json | 20 "/xyz/openbmc_project/sensors/temperature/ps0_tempture"
43 "/xyz/openbmc_project/sensors/temperature/ps1_tempture"
82 "/xyz/openbmc_project/sensors/temperature/bmc_card"
110 "/xyz/openbmc_project/sensors/temperature/inlet",
111 "/xyz/openbmc_project/sensors/temperature/outlet",
112 "/xyz/openbmc_project/sensors/temperature/p0_dimm_vr0_temp",
113 "/xyz/openbmc_project/sensors/temperature/p0_dimm_vr1_temp",
114 "/xyz/openbmc_project/sensors/temperature/p0_vccin_vr_temp",
115 "/xyz/openbmc_project/sensors/temperature/p0_vccio_vr_temp",
116 "/xyz/openbmc_project/sensors/temperature/p1_dimm_vr0_temp",
[all …]
|
| /openbmc/openbmc/meta-ampere/meta-jade/recipes-phosphor/ipmi/phosphor-ipmi-config/ |
| H A D | dcmi_sensors.json | 3 … {"instance": 1, "dbus": "/xyz/openbmc_project/sensors/temperature/PSU0_TEMP", "record_id": 243},
4 … {"instance": 2, "dbus": "/xyz/openbmc_project/sensors/temperature/PSU1_TEMP", "record_id": 244}
7 … {"instance": 1, "dbus": "/xyz/openbmc_project/sensors/temperature/TS1_Temp", "record_id": 1},
8 … {"instance": 2, "dbus": "/xyz/openbmc_project/sensors/temperature/TS2_Temp", "record_id": 2},
9 … {"instance": 3, "dbus": "/xyz/openbmc_project/sensors/temperature/TS3_Temp", "record_id": 3},
10 … {"instance": 4, "dbus": "/xyz/openbmc_project/sensors/temperature/TS4_Temp", "record_id": 4},
11 … {"instance": 5, "dbus": "/xyz/openbmc_project/sensors/temperature/TS5_Temp", "record_id": 5},
12 {"instance": 6, "dbus": "/xyz/openbmc_project/sensors/temperature/TS6_Temp", "record_id": 6}
15 …{ "instance": 1, "dbus": "/xyz/openbmc_project/sensors/temperature/S0_SOC_Temp", "record_id": 107 …
16 …{ "instance": 2, "dbus": "/xyz/openbmc_project/sensors/temperature/S0_SOC_VRD_Temp", "record_id": …
[all …]
|
| /openbmc/openbmc/meta-ibm/recipes-phosphor/ipmi/phosphor-ipmi-config/p10bmc/ |
| H A D | dcmi_sensors.json | 5 "dbus": "/xyz/openbmc_project/sensors/temperature/Ambient_0_Temp",
10 "dbus": "/xyz/openbmc_project/sensors/temperature/Ambient_1_Temp",
15 "dbus": "/xyz/openbmc_project/sensors/temperature/Ambient_2_Temp",
22 "dbus": "/xyz/openbmc_project/sensors/temperature/PCIE_0_Temp",
27 "dbus": "/xyz/openbmc_project/sensors/temperature/PCIE_1_Temp",
34 "dbus": "/xyz/openbmc_project/sensors/temperature/proc0_core0_0_temp",
39 "dbus": "/xyz/openbmc_project/sensors/temperature/proc0_core0_1_temp",
44 "dbus": "/xyz/openbmc_project/sensors/temperature/proc1_core0_0_temp",
49 "dbus": "/xyz/openbmc_project/sensors/temperature/proc1_core0_1_temp",
54 "dbus": "/xyz/openbmc_project/sensors/temperature/proc2_core0_0_temp",
[all …]
|
| /openbmc/openbmc/meta-ampere/meta-mitchell/recipes-phosphor/ipmi/phosphor-ipmi-config/ |
| H A D | dcmi_sensors.json | 3 {"instance": 1, "dbus": "/xyz/openbmc_project/sensors/temperature/InletTemp", "record_id": 6},
4 …{"instance": 2, "dbus": "/xyz/openbmc_project/sensors/temperature/SysCabInletTemp", "record_id": 7…
5 {"instance": 3, "dbus": "/xyz/openbmc_project/sensors/temperature/MBInletTemp1", "record_id": 8},
6 {"instance": 4, "dbus": "/xyz/openbmc_project/sensors/temperature/MBInletTemp2", "record_id": 9},
7 {"instance": 5, "dbus": "/xyz/openbmc_project/sensors/temperature/SysInletTemp", "record_id": 13}
10 {"instance": 1, "dbus": "/xyz/openbmc_project/sensors/temperature/OutletTemp", "record_id": 1},
11 …{"instance": 2, "dbus": "/xyz/openbmc_project/sensors/temperature/Psu0InletTemp2", "record_id": 2},
12 …{"instance": 3, "dbus": "/xyz/openbmc_project/sensors/temperature/Psu1InletTemp2", "record_id": 3},
13 {"instance": 4, "dbus": "/xyz/openbmc_project/sensors/temperature/PcieZoneTemp1", "record_id": 4},
14 {"instance": 5, "dbus": "/xyz/openbmc_project/sensors/temperature/PcieZoneTemp2", "record_id": 5},
[all …]
|
| /openbmc/openbmc/meta-yadro/meta-nicole/recipes-phosphor/configuration/nicole-yaml-config/ |
| H A D | nicole-ipmi-sensors.yaml | 196 path: /xyz/openbmc_project/sensors/temperature/dimm0_temp
208 path: /xyz/openbmc_project/sensors/temperature/dimm1_temp
212 path: /xyz/openbmc_project/sensors/temperature/dimm2_temp
216 path: /xyz/openbmc_project/sensors/temperature/dimm3_temp
220 path: /xyz/openbmc_project/sensors/temperature/dimm4_temp
224 path: /xyz/openbmc_project/sensors/temperature/dimm5_temp
228 path: /xyz/openbmc_project/sensors/temperature/dimm6_temp
232 path: /xyz/openbmc_project/sensors/temperature/dimm7_temp
236 path: /xyz/openbmc_project/sensors/temperature/dimm8_temp
240 path: /xyz/openbmc_project/sensors/temperature/dimm9_temp
[all …]
|
| /openbmc/openbmc/meta-ampere/meta-mitchell/recipes-phosphor/configuration/mtmitchell-yaml-config/ |
| H A D | mtmitchell-ipmi-sensors.yaml | 14 path: /xyz/openbmc_project/sensors/temperature/OutletTemp
25 path: /xyz/openbmc_project/sensors/temperature/Psu1InletTemp2
29 path: /xyz/openbmc_project/sensors/temperature/PcieZoneTemp1
33 path: /xyz/openbmc_project/sensors/temperature/Psu0InletTemp2
37 path: /xyz/openbmc_project/sensors/temperature/PcieZoneTemp2
42 path: /xyz/openbmc_project/sensors/temperature/InletTemp
47 path: /xyz/openbmc_project/sensors/temperature/SysCabInletTemp
52 path: /xyz/openbmc_project/sensors/temperature/MBInletTemp1
57 path: /xyz/openbmc_project/sensors/temperature/MBInletTemp2
62 path: /xyz/openbmc_project/sensors/temperature/AST2600CPUTemp
[all …]
|
| /openbmc/openbmc/meta-quanta/meta-olympus-nuvoton/recipes-phosphor/configuration/olympus-nuvoton-yaml-config/ |
| H A D | olympus-nuvoton-ipmi-sensors.yaml | 1 1: &temperature
5 path: /xyz/openbmc_project/sensors/temperature/bmc_card
24 <<: *temperature
26 path: /xyz/openbmc_project/sensors/temperature/inlet
29 <<: *temperature
31 path: /xyz/openbmc_project/sensors/temperature/outlet
34 <<: *temperature
36 path: /xyz/openbmc_project/sensors/temperature/MB0_Temp
39 <<: *temperature
41 path: /xyz/openbmc_project/sensors/temperature/p0_vccin_vr_temp
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/iio/afe/ |
| H A D | temperature-transducer.yaml | 4 $id: http://devicetree.org/schemas/iio/afe/temperature-transducer.yaml#
7 title: Temperature Transducer
13 A temperature transducer is a device that converts a thermal quantity
14 into any other physical quantity. This binding applies to temperature to
15 voltage (like the LTC2997), and temperature to current (like the AD590)
19 When an io-channel measures the output voltage of a temperature analog front
20 end such as a temperature transducer, the interesting measurement is almost
21 always the corresponding temperature, not the voltage output. This binding
29 When using a temperature to voltage transducer, Rsense is set to 1.
31 The following circuits show a temperature to current and a temperature to
[all …]
|