| /openbmc/linux/Documentation/hwmon/ |
| H A D | nct6775.rst | 15 Addresses scanned: ISA address retrieved from Super I/O registers
19 * Nuvoton NCT5572D/NCT6771F/NCT6772F/NCT6775F/W83677HG-I
23 Addresses scanned: ISA address retrieved from Super I/O registers
31 Addresses scanned: ISA address retrieved from Super I/O registers
39 Addresses scanned: ISA address retrieved from Super I/O registers
47 Addresses scanned: ISA address retrieved from Super I/O registers
55 Addresses scanned: ISA address retrieved from Super I/O registers
63 Addresses scanned: ISA address retrieved from Super I/O registers
71 Addresses scanned: ISA address retrieved from Super I/O registers
79 Addresses scanned: ISA address retrieved from Super I/O registers
[all …]
|
| H A D | f71882fg.rst | 10 Addresses scanned: none, address read from Super I/O config space
18 Addresses scanned: none, address read from Super I/O config space
26 Addresses scanned: none, address read from Super I/O config space
34 Addresses scanned: none, address read from Super I/O config space
42 Addresses scanned: none, address read from Super I/O config space
50 Addresses scanned: none, address read from Super I/O config space
58 Addresses scanned: none, address read from Super I/O config space
66 Addresses scanned: none, address read from Super I/O config space
74 Addresses scanned: none, address read from Super I/O config space
82 Addresses scanned: none, address read from Super I/O config space
[all …]
|
| H A D | it87.rst | 10 Addresses scanned: from Super I/O config space (8 I/O ports)
18 Addresses scanned: from Super I/O config space (8 I/O ports)
24 Addresses scanned: from Super I/O config space (8 I/O ports)
32 Addresses scanned: from Super I/O config space (8 I/O ports)
40 Addresses scanned: from Super I/O config space (8 I/O ports)
48 Addresses scanned: from Super I/O config space (8 I/O ports)
56 Addresses scanned: from Super I/O config space (8 I/O ports)
64 Addresses scanned: from Super I/O config space (8 I/O ports)
72 Addresses scanned: from Super I/O config space (8 I/O ports)
80 Addresses scanned: from Super I/O config space (8 I/O ports)
[all …]
|
| H A D | w83627ehf.rst | 10 Addresses scanned: ISA address retrieved from Super I/O registers
18 Addresses scanned: ISA address retrieved from Super I/O registers
22 * Winbond W83627DHG-P
26 Addresses scanned: ISA address retrieved from Super I/O registers
34 Addresses scanned: ISA address retrieved from Super I/O registers
42 Addresses scanned: ISA address retrieved from Super I/O registers
46 * Winbond W83667HG-B
50 Addresses scanned: ISA address retrieved from Super I/O registers
54 * Nuvoton NCT6775F/W83667HG-I
58 Addresses scanned: ISA address retrieved from Super I/O registers
[all …]
|
| H A D | f71805f.rst | 10 Addresses scanned: none, address read from Super I/O config space
18 Addresses scanned: none, address read from Super I/O config space
26 Addresses scanned: none, address read from Super I/O config space
44 -----------
46 The Fintek F71805F/FG Super I/O chip includes complete hardware monitoring
53 The Fintek F71872F/FG Super I/O chip is almost the same, with two
57 The Fintek F71806F/FG Super-I/O chip is essentially the same as the
65 ------------------
67 Voltages are sampled by an 8-bit ADC with a LSB of 8 mV. The supported
84 in1 VIN1 VTT1.2V 10K - 1.00 1.20 V
[all …]
|
| H A D | pc87427.rst | 10 Addresses scanned: none, address read from Super I/O config space
21 -----------
23 The National Semiconductor Super I/O chip includes complete hardware
36 --------------
38 Fan rotation speeds are reported as 14-bit values from a gated clock
41 An alarm is triggered if the rotation speed drops below a programmable
42 limit. Another alarm is triggered if the speed is too low to be measured
46 Fan Speed Control
47 -----------------
49 Fan speed can be controlled by PWM outputs. There are 4 possible modes:
[all …]
|
| H A D | pc87360.rst | 10 Addresses scanned: none, address read from Super I/O config space
22 -----------------
27 - 0: None
28 - **1**: Forcibly enable internal voltage and temperature channels,
30 - 2: Forcibly enable all voltage and temperature channels, except in9
31 - 3: Forcibly enable all voltage and temperature channels, including in9
42 -----------
44 The National Semiconductor PC87360 Super I/O chip contains monitoring and
48 The National Semiconductor PC87365 and PC87366 Super I/O chips are complete
56 PC87360 - 2 2 - 0xE1
[all …]
|
| H A D | sch5627.rst | 10 Addresses scanned: none, address read from Super I/O config space
18 -----------
20 SMSC SCH5627 Super I/O chips include complete hardware monitoring
24 affect the speed of each fan. Setting pwmX_auto_channels_temp to 0 forces
25 the corresponding fan to full speed until another value is written.
|
| H A D | smsc47m1.rst | 10 Addresses scanned: none, address read from Super I/O config space
26 Addresses scanned: none, address read from Super I/O config space
34 Addresses scanned: none, address read from Super I/O config space
44 - Mark D. Studebaker <mdsxyz123@yahoo.com>,
45 - With assistance from Bruce Allen <ballen@uwm.edu>, and his
48 - http://www.lsc-group.phys.uwm.edu/%7Eballen/driver/
50 - Gabriele Gorla <gorlik@yahoo.com>,
51 - Jean Delvare <jdelvare@suse.de>
54 -----------
56 The Standard Microsystems Corporation (SMSC) 47M1xx Super I/O chips
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/usb/ |
| H A D | usb.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
22 phy-names:
26 usb-phy:
27 $ref: /schemas/types.yaml#/definitions/phandle-array
36 UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected, UTMI+ low
38 serial is specified and High-Speed Inter-Chip feature if HSIC is
44 maximum-speed:
[all …]
|
| H A D | cdns,usb3.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Cadence USBSS-DRD controller
10 - Pawel Laszczak <pawell@cadence.com>
18 - description: OTG controller registers
19 - description: XHCI Host controller registers
20 - description: DEVICE controller registers
22 reg-names:
24 - const: otg
[all …]
|
| H A D | onnn,nb7vpq904m.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ON Semiconductor Type-C DisplayPort ALT Mode Linear Redriver
10 - Neil Armstrong <neil.armstrong@linaro.org>
15 - onnn,nb7vpq904m
20 vcc-supply:
23 enable-gpios: true
25 retimer-switch:
29 orientation-switch:
[all …]
|
| H A D | ti,hd3ss3220.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Biju Das <biju.das.jz@bp.renesas.com>
12 description: |-
14 Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The
36 description: Super Speed (SS) MUX inputs connected to SS capable connector.
40 description: Output of 2:1 MUX connected to Super Speed (SS) data bus.
43 - port@0
44 - port@1
[all …]
|
| H A D | nvidia,tegra-xudc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
14 - Nagarjuna Kristam <nkristam@nvidia.com>
15 - JC Kuo <jckuo@nvidia.com>
16 - Thierry Reding <treding@nvidia.com>
21 - enum:
22 - nvidia,tegra210-xudc # For Tegra210
23 - nvidia,tegra186-xudc # For Tegra186
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/phy/ |
| H A D | nvidia,tegra194-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra194-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| H A D | socionext,uniphier-usb3ss-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Socionext UniPhier USB3 Super-Speed (SS) PHY
12 Although the controller includes High-Speed PHY and Super-Speed PHY,
13 this describes about Super-Speed PHY.
16 - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
21 - socionext,uniphier-pro4-usb3-ssphy
22 - socionext,uniphier-pro5-usb3-ssphy
[all …]
|
| H A D | nvidia,tegra186-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra186-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| /openbmc/linux/drivers/usb/gadget/function/ |
| H A D | u_uvc.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
7 * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd.
36 * Control descriptors array pointers for full-/high-speed and
37 * super-speed. They point by default to the uvc_fs_control_cls and
45 * Streaming descriptors array pointers for full-speed, high-speed and
46 * super-speed. They will point to the uvc_[fhs]s_streaming_cls arrays
47 * for configfs-based gadgets. Legacy gadgets must initialize them in
54 /* Default control descriptors for configfs-based gadgets. */
60 * Control descriptors pointers arrays for full-/high-speed and
61 * super-speed. The first element is a configurable control header
[all …]
|
| /openbmc/linux/drivers/usb/common/ |
| H A D | common.c | 1 // SPDX-License-Identifier: GPL-2.0
7 * compiled-in as well. Otherwise, if either of the two stacks is
30 * usb_ep_type_string() - Returns human readable-name of the endpoint type.
31 * @ep_type: The endpoint type to return human-readable name for. If it's not
71 [USB_SPEED_LOW] = "low-speed",
72 [USB_SPEED_FULL] = "full-speed",
73 [USB_SPEED_HIGH] = "high-speed",
75 [USB_SPEED_SUPER] = "super-speed",
76 [USB_SPEED_SUPER_PLUS] = "super-speed-plus",
81 [USB_SSP_GEN_2x1] = "super-speed-plus-gen2x1",
[all …]
|
| /openbmc/linux/Documentation/driver-api/usb/ |
| H A D | usb3-debug-port.rst | 19 3) have a USB 3.0 super-speed A-to-A debugging cable.
30 super-speed port). The debug device is fully compliant with
32 performance full-duplex serial link between the debug target
41 Other uses include simpler, lockless logging instead of a full-
58 "usbcore.autosuspend=-1"
63 should be a USB 3.0 super-speed A-to-A debugging cable.
74 # tail -f /var/log/kern.log
75 [ 1815.983374] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd
76 [ 1815.999595] usb 4-3: LPM exit latency is zeroed, disabling LPM.
77 [ 1815.999899] usb 4-3: New USB device found, idVendor=1d6b, idProduct=0004
[all …]
|
| /openbmc/linux/drivers/usb/gadget/udc/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
7 # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
9 # - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10 # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11 # - Some systems have both kinds of controllers.
13 # With help from a special transceiver and a "Mini-AB" jack, systems with
14 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
22 # - integrated/SOC controllers first
23 # - licensed IP used in both SOC and discrete versions
24 # - discrete ones (including all PCI-only controllers)
[all …]
|
| /openbmc/linux/drivers/phy/qualcomm/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
36 Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
124 controllers on Qualcomm chips. This driver supports the high-speed
133 Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm
142 Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm
160 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
163 Support for the USB high-speed ULPI compliant phy on Qualcomm
171 Enable support for the USB high-speed SNPS Femto phy on Qualcomm
184 tristate "Qualcomm 28nm High-Speed PHY"
186 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/xilinx/ |
| H A D | zynqmp-zc1751-xm017-dc3.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * dts file for Xilinx ZynqMP zc1751-xm017-dc3
5 * (C) Copyright 2016 - 2021, Xilinx, Inc.
10 /dts-v1/;
13 #include "zynqmp-clk-ccf.dtsi"
14 #include <dt-bindings/phy/phy.h>
17 model = "ZynqMP zc1751-xm017-dc3 RevA";
18 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
34 stdout-path = "serial0:115200n8";
43 compatible = "fixed-clock";
[all …]
|
| /openbmc/qemu/hw/usb/ |
| H A D | desc.c | 7 /* ------------------------------------------------------------------ */
16 return -1; in usb_desc_device()
19 d->bLength = bLength; in usb_desc_device()
20 d->bDescriptorType = USB_DT_DEVICE; in usb_desc_device()
22 if (msos && dev->bcdUSB < 0x0200) { in usb_desc_device()
25 * Done this way so msos-desc compat property will handle both in usb_desc_device()
28 d->u.device.bcdUSB_lo = usb_lo(0x0200); in usb_desc_device()
29 d->u.device.bcdUSB_hi = usb_hi(0x0200); in usb_desc_device()
31 d->u.device.bcdUSB_lo = usb_lo(dev->bcdUSB); in usb_desc_device()
32 d->u.device.bcdUSB_hi = usb_hi(dev->bcdUSB); in usb_desc_device()
[all …]
|
| /openbmc/u-boot/drivers/usb/common/ |
| H A D | common.c | 1 // SPDX-License-Identifier: GPL-2.0+
25 const void *fdt = gd->fdt_blob; in usb_get_dr_mode()
44 [USB_SPEED_LOW] = "low-speed",
45 [USB_SPEED_FULL] = "full-speed",
46 [USB_SPEED_HIGH] = "high-speed",
48 [USB_SPEED_SUPER] = "super-speed",
53 const void *fdt = gd->fdt_blob; in usb_get_maximum_speed()
57 max_speed = fdt_getprop(fdt, node, "maximum-speed", NULL); in usb_get_maximum_speed()
59 pr_err("usb maximum-speed not found\n"); in usb_get_maximum_speed()
|