Home
last modified time | relevance | path

Searched full:soldered (Results 1 – 25 of 51) sorted by relevance

123

/openbmc/u-boot/include/configs/
H A Dsbc8548.h40 * If you want to boot from the SODIMM flash, instead of the soldered
134 * ff80_0000 ffff_ffff 8MB soldered flash
137 * ef80_0000 efff_ffff 8MB soldered flash
227 #define CONFIG_SYS_ALT_FLASH 0xef800000 /* 8MB soldered flash */
374 * For soldered on flash, (128kB/sector) we use 2 sectors for u-boot and
475 #elif CONFIG_SYS_TEXT_BASE == 0xfffa0000 /* Boot from 8MB soldered flash */
/openbmc/u-boot/board/sbc8548/
H A Dtlb.c103 * 0xef800000 4M 1st 1/2 8MB soldered FLASH
111 * 0xefc00000 4M 2nd half 8MB soldered FLASH
/openbmc/u-boot/doc/
H A DREADME.at9116 0xD0000000 - D07FFFFF Soldered Atmel Dataflash (AT45DB642)
37 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642)
99 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642)
/openbmc/u-boot/arch/arm/mach-sti/
H A DKconfig17 with PCB soldered antenna
/openbmc/phosphor-dbus-interfaces/yaml/xyz/openbmc_project/Inventory/Item/
H A DTrustedComponent.interface.yaml42 electronic components are connected through a wire or soldered
/openbmc/u-boot/board/xes/xpedite520x/
H A Dddr.c16 /* We use soldered memory, but use an SPD EEPROM to describe it. in get_spd()
/openbmc/u-boot/board/freescale/p1_p2_rdb_pc/
H A DREADME25 As these boards use soldered DDR chips not regular DIMMs, an on-board EEPROM
/openbmc/u-boot/arch/arm/mach-at91/arm920t/
H A Dat91rm9200_devices.c21 * peripheral pins. Good to have if hardware is soldered optionally
/openbmc/openbmc/meta-security/docs/
H A Ddm-verity-beaglebone.txt37 soldered on storage and to the removable u-SD card.
/openbmc/u-boot/board/freescale/ls1021aiot/
H A DREADME13 - Soldered DDR chip
/openbmc/u-boot/board/intel/
H A DKconfig41 with 1GB DDR2 soldered down memory and a carrier board with the
/openbmc/u-boot/arch/arm/mach-at91/arm926ejs/
H A Dat91sam9rl_devices.c16 * peripheral pins. Good to have if hardware is soldered optionally
H A Dat91sam9261_devices.c16 * peripheral pins. Good to have if hardware is soldered optionally
H A Dat91sam9m10g45_devices.c17 * peripheral pins. Good to have if hardware is soldered optionally
H A Dat91sam9263_devices.c20 * peripheral pins. Good to have if hardware is soldered optionally
H A Dat91sam9260_devices.c19 * peripheral pins. Good to have if hardware is soldered optionally
/openbmc/linux/Documentation/devicetree/bindings/net/
H A Dsff,sfp.yaml17 - sff,sff # for soldered down SFF modules
/openbmc/u-boot/board/liebherr/mccmon6/
H A Dmccmon6.c151 * eMMC don't have card detect pin - since it is soldered to the in board_mmc_getcd()
168 * mmc0 Soldered on board eMMC device in board_mmc_init()
/openbmc/linux/arch/arm/boot/dts/allwinner/
H A Dsun6i-a31s-sina31s.dts43 /* The SinA31s development board has the SinA31s core board soldered on */
/openbmc/linux/arch/arm/boot/dts/marvell/
H A Darmada-xp-openblocks-ax3-4.dts25 reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
/openbmc/u-boot/arch/arm/dts/
H A Dsun6i-a31s-sina31s.dts43 /* The SinA31s development board has the SinA31s core board soldered on */
/openbmc/linux/Documentation/security/tpm/
H A Dxen-tpmfront.rst109 The physical TPM that is soldered onto the motherboard.
/openbmc/linux/Documentation/devicetree/bindings/arm/
H A Dfsl.yaml725 - const: dh,imx6ull-dhcom-som # The DHCOR is soldered on the DHCOM
990 variants. It is designed to be soldered on different carrier boards.
1020 variants. It is designed to be soldered on different carrier boards.
1109 variants. It is designed to be soldered on different carrier boards.
1241 TQMa93xxLA is designed to be soldered on different carrier boards.
1247 soldered on an adapter board or for the connector variant
/openbmc/docs/designs/
H A Dphysical-topology.md160 supplies shared by multiple objects or soldered CPUs which are "part of" instead
/openbmc/linux/arch/arm64/boot/dts/amlogic/
H A Dmeson-gxl-s805x-libretech-ac.dts32 * The pads are present but no connector is soldered on

123