Home
last modified time | relevance | path

Searched +full:shut +full:- +full:down +full:- +full:gpios (Results 1 – 25 of 36) sorted by relevance

12

/openbmc/linux/Documentation/devicetree/bindings/power/reset/
H A Dltc2952-poweroff.txt3 This chip is used to externally trigger a system shut down. Once the trigger has
4 been sent, the chip's watchdog has to be reset to gracefully shut down.
9 - compatible: Must contain: "lltc,ltc2952"
10 - watchdog-gpios: phandle + gpio-specifier for the GPIO connected to the
12 - kill-gpios: phandle + gpio-specifier for the GPIO connected to the
16 - trigger-gpios: phandle + gpio-specifier for the GPIO connected to the
20 - trigger-delay-ms The number of milliseconds to wait after trigger line
21 assertion before executing shut down procedure.
29 trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
30 trigger-delay-ms = <2000>;
[all …]
/openbmc/linux/Documentation/devicetree/bindings/sound/
H A Dti,tas6424.txt1 Texas Instruments TAS6424 Quad-Channel Audio amplifier
6 - compatible: "ti,tas6424" - TAS6424
7 - reg: I2C slave address
8 - sound-dai-cells: must be equal to 0
9 - standby-gpios: GPIO used to shut the TAS6424 down.
10 - mute-gpios: GPIO used to mute all the outputs
18 #sound-dai-cells = <0>;
22 https://www.ti.com/product/TAS6424-Q1
H A Drealtek,rt1015p.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Tzung-Bi Shih <tzungbi@kernel.org>
19 - realtek,rt1015p
20 - realtek,rt1019p
22 sdb-gpios:
25 0 means shut down; 1 means power on.
28 "#sound-dai-cells":
32 - compatible
[all …]
H A Dtas2562.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Andrew Davis <afd@ti.com>
14 The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
26 - $ref: dai-common.yaml#
31 - ti,tas2562
32 - ti,tas2563
33 - ti,tas2564
34 - ti,tas2110
[all …]
/openbmc/linux/drivers/power/reset/
H A Dltc2952-poweroff.c1 // SPDX-License-Identifier: GPL-2.0-or-later
6 * Maintainer: René Moll <linux@r-moll.nl>
8 * ----------------------------------------
9 * - Description
10 * ----------------------------------------
13 * Its function is to determine when a external shut down is triggered
14 * and react by properly shutting down the system.
18 * ----------------------------------------
19 * - GPIO
20 * ----------------------------------------
[all …]
/openbmc/linux/arch/arm/boot/dts/st/
H A Dste-hrefv60plus.dtsi1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2012 ST-Ericsson AB
6 #include "ste-href-ab8500.dtsi"
7 #include "ste-href.dtsi"
10 model = "ST-Ericsson HREF (v60+) platform with Device Tree";
11 compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
13 thermal-zones {
14 chassis-thermal {
16 polling-delay = <20000>;
18 polling-delay-passive = <2000>;
[all …]
/openbmc/linux/arch/arm/boot/dts/gemini/
H A Dgemini-dlink-dns-313.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
6 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/thermal/thermal.h>
13 model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
14 compatible = "dlink,dns-313", "cortina,gemini";
15 #address-cells = <1>;
16 #size-cells = <1>;
19 /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
[all …]
H A Dgemini-dlink-dir-685.dts2 * Device Tree file for D-Link DIR-685 Xtreme N Storage Router
5 /dts-v1/;
8 #include <dt-bindings/input/input.h>
11 model = "D-Link DIR-685 Xtreme N Storage Router";
12 compatible = "dlink,dir-685", "cortina,gemini";
13 #address-cells = <1>;
14 #size-cells = <1>;
17 /* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
24 stdout-path = "uart0:19200n8";
28 compatible = "gpio-keys";
[all …]
/openbmc/linux/arch/arm/boot/dts/nvidia/
H A Dtegra20-asus-tf101.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/atmel-maxtouch.h>
5 #include <dt-bindings/input/gpio-keys.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/thermal/thermal.h>
10 #include "tegra20-cpu-opp.dtsi"
11 #include "tegra20-cpu-opp-microvolt.dtsi"
16 chassis-type = "convertible";
33 * pre-existing /chosen node to be available to insert the
[all …]
H A Dtegra30-asus-nexus7-grouper-common.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 #include <dt-bindings/input/gpio-keys.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/power/summit,smb347-charger.h>
6 #include <dt-bindings/thermal/thermal.h>
9 #include "tegra30-cpu-opp.dtsi"
10 #include "tegra30-cpu-opp-microvolt.dtsi"
11 #include "tegra30-asus-lvds-display.dtsi"
27 * pre-existing /chosen node to be available to insert the
33 trusted-foundations {
[all …]
H A Dtegra30-cardhu.dtsi1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/thermal/thermal.h>
5 #include "tegra30-cpu-opp.dtsi"
6 #include "tegra30-cpu-opp-microvolt.dtsi"
12 * A02 will have different sets of GPIOs for fixed regulator compare to
16 * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
17 * tegra30-cardhu-a04.dts.
20 * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
22 * The (downstream internal) U-Boot of Cardhu display the board-id as
[all …]
H A Dtegra20-acer-a500-picasso.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/atmel-maxtouch.h>
5 #include <dt-bindings/input/gpio-keys.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/thermal/thermal.h>
10 #include "tegra20-cpu-opp.dtsi"
11 #include "tegra20-cpu-opp-microvolt.dtsi"
32 * pre-existing /chosen node to be available to insert the
41 reserved-memory {
[all …]
H A Dtegra30-asus-transformer-common.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 #include <dt-bindings/input/gpio-keys.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/thermal/thermal.h>
8 #include "tegra30-cpu-opp.dtsi"
9 #include "tegra30-cpu-opp-microvolt.dtsi"
12 chassis-type = "convertible";
31 * pre-existing /chosen node to be available to insert the
37 trusted-foundations {
38 compatible = "tlm,trusted-foundations";
[all …]
H A Dtegra20-ventana.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/thermal/thermal.h>
7 #include "tegra20-cpu-opp.dtsi"
8 #include "tegra20-cpu-opp-microvolt.dtsi"
21 stdout-path = "serial0:115200n8";
40 vdd-supply = <&hdmi_vdd_reg>;
41 pll-supply = <&hdmi_pll_reg>;
43 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
[all …]
H A Dtegra20-paz00.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/thermal/thermal.h>
8 #include "tegra20-cpu-opp.dtsi"
9 #include "tegra20-cpu-opp-microvolt.dtsi"
25 stdout-path = "serial0:115200n8";
44 vdd-supply = <&hdmi_vdd_reg>;
45 pll-supply = <&hdmi_pll_reg>;
47 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
[all …]
H A Dtegra30-pegatron-chagall.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/input/gpio-keys.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/thermal/thermal.h>
9 #include "tegra30-cpu-opp.dtsi"
10 #include "tegra30-cpu-opp-microvolt.dtsi"
11 #include "tegra30-asus-lvds-display.dtsi"
16 chassis-type = "tablet";
35 * pre-existing /chosen node to be available to insert the
[all …]
/openbmc/phosphor-power/phosphor-power-sequencer/docs/
H A DREADME.md1 # phosphor-power-sequencer
5 The phosphor-power-sequencer application powers the chassis on/off and monitors
10 cause. Typically this is a voltage rail that shut down due to a fault.
14 The application is a single-threaded C++ executable. It is a 'daemon' process
18 The application is driven by an optional, system-specific JSON configuration
21 device, voltage rails, GPIOs, and fault checks to perform.
30 - UCD90160
31 - UCD90320
33 Additional device types can be supported by creating a new sub-class within the
38 - A BMC application or script sets the `state` property to 1 on the
[all …]
/openbmc/linux/arch/arm/boot/dts/ti/omap/
H A Domap3-pandora-common.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
9 #include <dt-bindings/input/input.h>
14 cpu0-supply = <&vcc>;
29 #clock-cells = <0>;
30 compatible = "fixed-clock";
31 clock-frequency = <26000000>;
35 compatible = "connector-analog-tv";
40 remote-endpoint = <&venc_out>;
45 gpio-leds {
47 compatible = "gpio-leds";
[all …]
/openbmc/linux/drivers/net/ethernet/sfc/falcon/
H A Dfalcon_boards.c1 // SPDX-License-Identifier: GPL-2.0-only
4 * Copyright 2007-2012 Solarflare Communications Inc.
30 * above which we should shut down to avoid damage is 80°C. */
91 struct i2c_client *client = i2c_new_client_device(&board->i2c_adap, info); in ef4_init_lm87()
97 /* Read-to-clear alarm/interrupt status */ in ef4_init_lm87()
108 board->hwmon_client = client; in ef4_init_lm87()
118 i2c_unregister_device(falcon_board(efx)->hwmon_client); in ef4_fini_lm87()
123 struct i2c_client *client = falcon_board(efx)->hwmon_client; in ef4_check_lm87()
129 if (EF4_WORKAROUND_7884(efx) && efx->link_state.up) in ef4_check_lm87()
161 netif_err(efx, hw, efx->net_dev, in ef4_check_lm87()
[all …]
/openbmc/u-boot/drivers/spi/
H A Dmxc_spi.c1 // SPDX-License-Identifier: GPL-2.0+
13 #include <asm/arch/imx-regs.h>
15 #include <asm/mach-imx/spi.h>
29 return -1; in board_spi_cs_gpio()
63 dm_gpio_set_value(&mxcs->ss, 1); in mxc_spi_cs_activate()
65 if (mxcs->gpio > 0) in mxc_spi_cs_activate()
66 gpio_set_value(mxcs->gpio, mxcs->ss_pol); in mxc_spi_cs_activate()
73 dm_gpio_set_value(&mxcs->ss, 0); in mxc_spi_cs_deactivate()
75 if (mxcs->gpio > 0) in mxc_spi_cs_deactivate()
76 gpio_set_value(mxcs->gpio, !(mxcs->ss_pol)); in mxc_spi_cs_deactivate()
[all …]
/openbmc/u-boot/drivers/net/
H A Dpic32_eth.c1 // SPDX-License-Identifier: GPL-2.0+
41 if (!dm_gpio_is_valid(&priv->rst_gpio)) in board_netphy_reset()
45 dm_gpio_set_value(&priv->rst_gpio, 0); in board_netphy_reset()
47 dm_gpio_set_value(&priv->rst_gpio, 1); in board_netphy_reset()
56 struct pic32_ectl_regs *ectl_p = priv->ectl_regs; in pic32_mii_init()
57 struct pic32_emac_regs *emac_p = priv->emac_regs; in pic32_mii_init()
63 writel(ETHCON_ON | ETHCON_TXRTS | ETHCON_RXEN, &ectl_p->con1.clr); in pic32_mii_init()
66 wait_for_bit_le32(&ectl_p->stat.raw, ETHSTAT_BUSY, false, in pic32_mii_init()
70 writel(ETHCON_ON, &ectl_p->con1.set); in pic32_mii_init()
75 writel(EMAC_SOFTRESET, &emac_p->cfg1.set); /* reset assert */ in pic32_mii_init()
[all …]
/openbmc/linux/drivers/media/platform/marvell/
H A Dcafe-driver.c1 // SPDX-License-Identifier: GPL-2.0-only
10 * Copyright 2006-11 One Laptop Per Child Association, Inc.
11 * Copyright 2006-11 Jonathan Corbet <corbet@lwn.net>
28 #include <media/v4l2-device.h>
36 #include "mcam-core.h"
57 * Most of the camera controller registers are defined in mcam-core.h,
63 * "General purpose register" has a couple of GPIOs used for sensor
67 #define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */
82 #define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */
130 dev_err(&(cam)->pdev->dev, fmt, ##arg);
[all …]
/openbmc/linux/drivers/mfd/
H A DKconfig1 # SPDX-License-Identifier: GPL-2.0-only
45 tristate "Active-semi ACT8945A"
50 Support for the ACT8945A PMIC from Active-semi. This device
51 features three step-down DC/DC converters and four low-dropout
67 sun4i-gpadc-iio and the hwmon driver iio_hwmon.
70 called sun4i-gpadc.
101 tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
103 over current monitoring, GPIOs, ADC and a watchdog.
112 individual components like LCD backlight, LEDs, GPIOs and Kepad
132 over at91-usart-serial driver and usart-spi-driver. Only one function
[all …]
H A Dtps65010.c1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * tps65010 - driver for tps6501x power management chips
6 * Copyright (C) 2004-2005 David Brownell
27 /*-------------------------------------------------------------------------*/
37 /*-------------------------------------------------------------------------*/
40 * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
47 * battery-insert != device-on.
84 /*-------------------------------------------------------------------------*/
184 struct tps65010 *tps = s->private; in dbg_show()
190 switch (tps->model) { in dbg_show()
[all …]
/openbmc/linux/drivers/tty/serial/
H A Dcpm_uart.c1 // SPDX-License-Identifier: GPL-2.0+
14 * (C) 2005-2006 MontaVista Software, Inc.
28 #include <linux/dma-mapping.h>
59 cpm_command(port->command, cmd); in cpm_line_cr_cmd()
69 cbd_t __iomem *bdp = pinfo->tx_bd_base; in cpm_uart_tx_empty()
73 if (in_be16(&bdp->cbd_sc) & BD_SC_READY) in cpm_uart_tx_empty()
76 if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) { in cpm_uart_tx_empty()
83 pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret); in cpm_uart_tx_empty()
93 if (pinfo->gpios[GPIO_RTS]) in cpm_uart_set_mctrl()
94 gpiod_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); in cpm_uart_set_mctrl()
[all …]

12