| /openbmc/linux/Documentation/driver-api/ |
| H A D | ptp.rst | 1 .. SPDX-License-Identifier: GPL-2.0
18 - Set time
19 - Get time
20 - Shift the clock by a given offset atomically
21 - Adjust clock frequency
24 - Time stamp external events
25 - Period output signals configurable from user space
26 - Low Pass Filter (LPF) access from user space
27 - Synchronization of the Linux system time via the PPS subsystem
36 driver of asynchronous events (alarms and external time stamps) via
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/iio/dac/ |
| H A D | adi,ad5758.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Michael Hennerich <Michael.Hennerich@analog.com>
19 spi-cpha: true
21 adi,dc-dc-mode:
25 Mode of operation of the dc-to-dc converter
31 Programmable Power Control (PPC)
32 In this mode, the VDPC+ voltage is user-programmable to a fixed level
36 voltage output at the VIOUT pin. Only one mode can be enabled at
[all …]
|
| /openbmc/linux/drivers/mtd/chips/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
13 support any device that is CFI-compliant, you need to enable this
18 tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
22 This option enables JEDEC-style probing of flash chips which are not
24 CFI-targeted flash drivers for any chips which are identified which
26 covers most AMD/Fujitsu-compatible chips and also non-CFI
53 are expected to be wired to the CPU in 'host-endian' form.
85 bool "Support 8-bit buswidth" if MTD_CFI_GEOMETRY
92 bool "Support 16-bit buswidth" if MTD_CFI_GEOMETRY
99 bool "Support 32-bit buswidth" if MTD_CFI_GEOMETRY
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/leds/ |
| H A D | leds-lm3532.txt | 1 * Texas Instruments - lm3532 White LED driver with ambient light sensing
4 The LM3532 provides the 3 high-voltage, low-side current sinks. The device is
5 programmable over an I2C-compatible interface and has independent
11 each with 32 internal voltage setting resistors, 8-bit logarithmic and linear
13 1000:1 dimming ratio with programmable fade in and fade out settings.
16 - compatible : "ti,lm3532"
17 - reg : I2C slave address
18 - #address-cells : 1
19 - #size-cells : 0
22 - enable-gpios : gpio pin to enable (active high)/disable the device.
[all …]
|
| /openbmc/linux/Documentation/hwmon/ |
| H A D | lm78.rst | 6 * National Semiconductor LM78 / LM78-J
10 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
20 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
28 - Frodo Looijaard <frodol@dds.nl>
29 - Jean Delvare <jdelvare@suse.de>
32 -----------
34 This driver implements support for the National Semiconductor LM78, LM78-J
38 the LM78 and LM78-J are exactly identical. The LM79 has one more VID line,
42 The LM7* implements one temperature sensor, three fan rotation speed sensors,
49 this case, alarms are issued during all the time when the actual temperature
[all …]
|
| H A D | pc87360.rst | 22 -----------------
27 - 0: None
28 - **1**: Forcibly enable internal voltage and temperature channels,
30 - 2: Forcibly enable all voltage and temperature channels, except in9
31 - 3: Forcibly enable all voltage and temperature channels, including in9
38 so they can't be used at the same time.
42 -----------
56 PC87360 - 2 2 - 0xE1
57 PC87363 - 2 2 - 0xE8
58 PC87364 - 3 3 - 0xE4
[all …]
|
| H A D | lm87.rst | 10 Addresses scanned: I2C 0x2c - 0x2e
18 Addresses scanned: I2C 0x2c - 0x2e
24 - Frodo Looijaard <frodol@dds.nl>,
25 - Philip Edelbrock <phil@netroedge.com>,
26 - Mark Studebaker <mdsxyz123@yahoo.com>,
27 - Stephen Rousset <stephen.rousset@rocketlogix.com>,
28 - Dan Eaton <dan.eaton@rocketlogix.com>,
29 - Jean Delvare <jdelvare@suse.de>,
30 - Original 2.6 port Jeff Oliver
33 -----------
[all …]
|
| H A D | w83781d.rst | 10 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
12 Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
18 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
28 Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
34 Addresses scanned: I2C 0x28 - 0x2f
42 - Frodo Looijaard <frodol@dds.nl>,
43 - Philip Edelbrock <phil@netroedge.com>,
44 - Mark Studebaker <mdsxyz123@yahoo.com>
47 -----------------
67 -----------
[all …]
|
| /openbmc/linux/include/linux/ |
| H A D | pruss_driver.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */
3 * PRU-ICSS sub-system specific definitions
5 * Copyright (C) 2014-2020 Texas Instruments Incorporated - http://www.ti.com/
6 * Suman Anna <s-anna@ti.com>
18 * enum pruss_gp_mux_sel - PRUSS GPI/O Mux modes for the
23 * values are interchanged. Also, this bit-field does not exist on
36 * enum pruss_gpi_mode - PRUSS GPI configuration modes, used
48 * enum pru_type - PRU core type identifier
50 * @PRU_TYPE_PRU: Programmable Real-time Unit
51 * @PRU_TYPE_RTU: Auxiliary Programmable Real-Time Unit
[all …]
|
| H A D | ptp_clock_kernel.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
19 * struct ptp_clock_request - request PTP clock event
47 * struct ptp_system_timestamp - system time corresponding to a PHC timestamp
57 * struct ptp_clock_info - describes a PTP hardware clock
64 * @n_alarm: The number of programmable alarms.
65 * @n_ext_ts: The number of external time stamp channels.
66 * @n_per_out: The number of programmable periodic signals.
67 * @n_pins: The number of programmable pins.
70 * programmable pins is nonzero, then drivers must
89 * @adjtime: Shifts the time of the hardware clock.
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/soc/ti/ |
| H A D | ti,pruss.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 TI Programmable Real-Time Unit and Industrial Communication Subsystem
11 - Suman Anna <s-anna@ti.com>
15 The Programmable Real-Time Unit and Industrial Communication Subsystem
16 (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x,
17 Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC
18 cores (Programmable Real-Time Units, or PRUs), shared RAM, data and
22 The programmable nature of the PRUs provide flexibility to implement custom
[all …]
|
| /openbmc/linux/Documentation/ABI/testing/ |
| H A D | sysfs-ptp | 41 Write integer to re-configure it.
47 This file contains the number of periodic or one shot
61 This file contains the number of programmable periodic
68 This file contains the number of programmable pins
88 This directory contains one file for each programmable
110 This write-only file enables or disables external
128 This write-only file enables or disables periodic
130 integers into the file: channel index, start time
131 seconds, start time nanoseconds, period seconds, and
139 This write-only file enables or disables delivery of
|
| H A D | sysfs-driver-jz4780-efuse | 1 What: /sys/devices/*/<our-device>/nvmem
4 Description: read-only access to the efuse on the Ingenic JZ4780 SoC
5 The SoC has a one time programmable 8K efuse that is
|
| /openbmc/linux/Documentation/watchdog/ |
| H A D | mlx-wdt.rst | 11 Mellanox watchdog device is implemented in a programmable logic device.
19 Get time-left isn't supported
23 a user-defined timeout.
25 Get time-left is supported.
38 Old systems still have only one main watchdog.
54 This mlx-wdt driver supports both HW watchdog implementations.
58 Mellanox watchdog device, identity name (mlx-wdt-main or mlx-wdt-aux),
61 version - type1 or type2.
66 Programmable logic device registers have little-endian order.
|
| /openbmc/linux/drivers/nvmem/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
37 calibration data required for the PCIe or the USB-C PHY.
40 be called nvmem-apple-efuses.
43 tristate "Broadcom On-Chip OTP Controller support"
52 will be called nvmem-bcm-ocotp.
68 i.MX SoCs, providing access to 4 Kbits of programmable
72 will be called nvmem-imx-iim.
75 tristate "i.MX 6/7/8 On-Chip OTP Controller support"
79 This is a driver for the On-Chip OTP Controller (OCOTP) available on
80 i.MX6 SoCs, providing access to 4 Kbits of one-time programmable
[all …]
|
| /openbmc/u-boot/include/mtd/ |
| H A D | mtd-abi.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
45 * @MTD_OPS_RAW: data are transferred as-is, with no error correction;
59 * struct mtd_write_req - data structure for requesting a write operation
64 * @usr_data: user-provided data buffer
65 * @usr_oob: user-provided OOB buffer
70 * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
71 * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
150 /* Write out-of-band data from MTD */
152 /* Read out-of-band data from MTD */
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/nvmem/ |
| H A D | lpc1850-otp.txt | 3 Internal OTP (One Time Programmable) memory for NXP LPC18xx/43xx devices.
6 - compatible: Should be "nxp,lpc1850-otp"
7 - reg: Must contain an entry with the physical base address and length
8 for each entry in reg-names.
9 - address-cells: must be set to 1.
10 - size-cells: must be set to 1.
16 compatible = "nxp,lpc1850-otp";
18 #address-cells = <1>;
19 #size-cells = <1>;
|
| /openbmc/linux/tools/perf/pmu-events/arch/x86/tigerlake/ |
| H A D | pipeline.json | 7 …y executing divide or square root operations. Accounts for integer and floating-point operations.",
117 "BriefDescription": "Mispredicted non-taken conditional branch instructions retired.",
135 …"BriefDescription": "All miss-predicted indirect branch instructions retired (excluding RETs. TSX …
139 …"PublicDescription": "Counts all miss-predicted indirect branch instructions retired (excluding RE…
166 …"PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that…
190 …reads, i.e., those in C0 sleep-state. A hyperthread becomes inactive when it executes the HLT or M…
197 …time stamp counter. This event can approximate elapsed time while the core was not in a halt state…
212 …time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For th…
220 …nge from time to time due to power or thermal throttling. For this reason, this event may have a c…
341 …e number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length …
[all …]
|
| /openbmc/linux/tools/perf/pmu-events/arch/x86/icelake/ |
| H A D | pipeline.json | 7 …y executing divide or square root operations. Accounts for integer and floating-point operations.",
117 "BriefDescription": "Mispredicted non-taken conditional branch instructions retired.",
135 …"BriefDescription": "All miss-predicted indirect branch instructions retired (excluding RETs. TSX …
139 …"PublicDescription": "Counts all miss-predicted indirect branch instructions retired (excluding RE…
166 …"PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that…
190 …reads, i.e., those in C0 sleep-state. A hyperthread becomes inactive when it executes the HLT or M…
197 …time stamp counter. This event can approximate elapsed time while the core was not in a halt state…
212 …time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For th…
220 …nge from time to time due to power or thermal throttling. For this reason, this event may have a c…
324 …e number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length …
[all …]
|
| /openbmc/linux/tools/perf/pmu-events/arch/x86/rocketlake/ |
| H A D | pipeline.json | 7 …y executing divide or square root operations. Accounts for integer and floating-point operations.",
117 "BriefDescription": "Mispredicted non-taken conditional branch instructions retired.",
135 …"BriefDescription": "All miss-predicted indirect branch instructions retired (excluding RETs. TSX …
139 …"PublicDescription": "Counts all miss-predicted indirect branch instructions retired (excluding RE…
166 …"PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that…
190 …reads, i.e., those in C0 sleep-state. A hyperthread becomes inactive when it executes the HLT or M…
197 …time stamp counter. This event can approximate elapsed time while the core was not in a halt state…
212 …time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For th…
220 …nge from time to time due to power or thermal throttling. For this reason, this event may have a c…
324 …e number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length …
[all …]
|
| /openbmc/linux/tools/perf/pmu-events/arch/x86/icelakex/ |
| H A D | pipeline.json | 7 …y executing divide or square root operations. Accounts for integer and floating-point operations.",
117 "BriefDescription": "Mispredicted non-taken conditional branch instructions retired.",
135 …"BriefDescription": "All miss-predicted indirect branch instructions retired (excluding RETs. TSX …
139 …"PublicDescription": "Counts all miss-predicted indirect branch instructions retired (excluding RE…
166 …"PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that…
190 …reads, i.e., those in C0 sleep-state. A hyperthread becomes inactive when it executes the HLT or M…
197 …time stamp counter. This event can approximate elapsed time while the core was not in a halt state…
212 …time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For th…
220 …nge from time to time due to power or thermal throttling. For this reason, this event may have a c…
324 …e number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length …
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | max77620.txt | 4 -------------------
5 - compatible: Must be one of
9 - reg: I2C device address.
12 -------------------
13 - interrupts: The interrupt on the parent the controller is
15 - interrupt-controller: Marks the device node as an interrupt controller.
16 - #interrupt-cells: is <2> and their usage is compliant to the 2 cells
17 variant of <../interrupt-controller/interrupts.txt>
19 are defined at dt-bindings/mfd/max77620.h.
21 - system-power-controller: Indicates that this PMIC is controlling the
[all …]
|
| /openbmc/linux/drivers/leds/flash/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
75 will be called "leds-mt6370-flash".
86 channels and each channel is programmable to support up to 1.5 A full
88 to supply one LED component to achieve current up to 2 A. In such case,
90 they will be enabled/disabled at the same time.
92 This driver can be built as a module, it will be called "leds-qcom-flash".
101 RT4505 includes torch and flash functions with programmable current.
114 will be called leds-rt8515.
|
| /openbmc/linux/include/uapi/linux/ |
| H A D | ptp_clock.h | 1 /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
3 * PTP 1588 clock support - user space interface
73 * struct ptp_clock_time - represents a time value
77 * included for sub-nanosecond resolution, should the demand for
89 int n_alarm; /* Number of programmable alarms. */
90 int n_ext_ts; /* Number of external time stamp channels. */
91 int n_per_out; /* Number of programmable periodic signals. */
94 /* Whether the clock supports precise system-device cross timestamps */
111 * Absolute start time.
118 * The start time should be "as soon as possible".
[all …]
|
| /openbmc/linux/include/uapi/mtd/ |
| H A D | mtd-abi.h | 1 /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
3 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
55 * @MTD_OPS_RAW: data are transferred as-is, with no error correction;
69 * struct mtd_write_req - data structure for requesting a write operation
74 * @usr_data: user-provided data buffer
75 * @usr_oob: user-provided OOB buffer
80 * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
81 * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
95 * struct mtd_read_req_ecc_stats - ECC statistics for a read operation
[all …]
|