| /openbmc/linux/Documentation/hwmon/ |
| H A D | crps.rst | 1 .. SPDX-License-Identifier: GPL-2.0-or-later
12 Addresses scanned: -
21 -----------
31 -----------
33 This driver does not auto-detect devices. You will have to instantiate the
34 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
39 -------------
43 curr1_input Measured input current
44 curr1_max Maximum input current
45 curr1_max_alarm Input maximum current high alarm
[all …]
|
| H A D | max20751.rst | 10 Addresses scanned: -
16 Author: Guenter Roeck <linux@roeck-us.net>
20 -----------
30 -----------
32 This driver does not auto-detect devices. You will have to instantiate the
33 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
38 ---------------------
44 -------------
50 in1_input Measured voltage.
51 in1_min Minimum input voltage.
[all …]
|
| H A D | lt7182s.rst | 1 .. SPDX-License-Identifier: GPL-2.0
12 Addresses scanned: -
16 Author: Guenter Roeck <linux@roeck-us.net>
20 -----------
22 LT7182S is a Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher with
27 -----------
36 # echo lt7182s 0x4f > /sys/bus/i2c/devices/i2c-4/new_device
42 ----------------
45 curr[1-2]_label "iin[12]"
46 curr[1-2]_input Measured input current
[all …]
|
| H A D | zl6100.rst | 10 Addresses scanned: -
12 Datasheet: https://www.renesas.com/us/en/document/dst/zl2004-datasheet.pdf
18 Addresses scanned: -
20 Datasheet: https://www.renesas.com/us/en/document/dst/zl2005-datasheet.pdf
26 Addresses scanned: -
28 Datasheet: https://www.renesas.com/us/en/document/dst/zl2006-datasheet.pdf
34 Addresses scanned: -
36 Datasheet: https://www.renesas.com/us/en/document/dst/zl2008-datasheet.pdf
42 Addresses scanned: -
44 Datasheet: https://www.renesas.com/us/en/document/dst/zl2105-datasheet.pdf
[all …]
|
| H A D | isl68137.rst | 10 Addresses scanned: -
21 Addresses scanned: -
31 Addresses scanned: -
41 Addresses scanned: -
51 Addresses scanned: -
61 Addresses scanned: -
71 Addresses scanned: -
81 Addresses scanned: -
91 Addresses scanned: -
101 Addresses scanned: -
[all …]
|
| H A D | acbel-fsg032.rst | 1 Kernel driver acbel-fsg032
6 * ACBEL FSG032-00xG power supply.
11 -----------
13 This driver supports ACBEL FSG032-00xG Power Supply. This driver
17 -----------
19 This driver does not auto-detect devices. You will have to instantiate the
20 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
24 -------------
30 curr1_crit_alarm Input current critical alarm.
33 curr1_max Maximum input current.
[all …]
|
| H A D | ir35221.rst | 9 Addresses scanned: -
13 Author: Samuel Mendoza-Jonas <sam@mendozajonas.com>
17 -----------
19 IR35221 is a Digital DC-DC Multiphase Converter
23 -----------
32 # echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
36 ----------------
40 curr1_input Measured input current
44 curr[2-3]_label "iout[1-2]"
45 curr[2-3]_input Measured output current
[all …]
|
| H A D | lm25066.rst | 10 Addresses scanned: -
22 Addresses scanned: -
34 Addresses scanned: -
44 Addresses scanned: -
54 Addresses scanned: -
61 Author: Guenter Roeck <linux@roeck-us.net>
65 -----------
76 -----------
78 This driver does not auto-detect devices. You will have to instantiate the
79 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
[all …]
|
| H A D | ir38064.rst | 9 Addresses scanned: -
12 …https://www.infineon.com/dgdl/Infineon-IR38060M-DS-v03_16-EN.pdf?fileId=5546d4625c167129015c3291ea…
17 Addresses scanned: -
20 …https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158d…
25 Addresses scanned: -
28 …https://www.infineon.com/dgdl/Infineon-IR38164M-DS-v02_02-EN.pdf?fileId=5546d462636cc8fb01640046ef…
33 Addresses scanned: -
36 …https://www.infineon.com/dgdl/Infineon-IR38263M-DataSheet-v03_05-EN.pdf?fileId=5546d4625b62cd8a015…
39 - Maxim Sloyko <maxims@google.com>
40 - Patrick Venture <venture@google.com>
[all …]
|
| H A D | ltc2978.rst | 10 Addresses scanned: -
18 Addresses scanned: -
26 Addresses scanned: -
34 Addresses scanned: -
42 Addresses scanned: -
52 Addresses scanned: -
60 Addresses scanned: -
68 Addresses scanned: -
76 Addresses scanned: -
84 Addresses scanned: -
[all …]
|
| H A D | pli1209bc.rst | 1 .. SPDX-License-Identifier: GPL-2.0
12 Addresses scanned: 0x50 - 0x5F
14 Datasheet: https://www.vicorpower.com/documents/datasheets/ds-PLI1209BCxyzz-VICOR.pdf
17 - Marcello Sylvester Bauer <sylv@sylv.io>
20 -----------
29 -------------
33 in1_input Input voltage.
34 in1_rated_min Minimum rated input voltage.
35 in1_rated_max Maximum rated input voltage.
36 in1_max Maximum input voltage.
[all …]
|
| H A D | max15301.rst | 1 .. SPDX-License-Identifier: GPL-2.0
12 Addresses scanned: -
20 -----------
26 Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
31 -----------
33 This driver does not auto-detect devices. You will have to instantiate the
34 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
39 ---------------------
45 -----------------
48 -----
[all …]
|
| H A D | tps53679.rst | 10 Addresses scanned: -
18 Addresses scanned: -
26 Addresses scanned: -
34 Addresses scanned: -
42 Addresses scanned: -
50 Addresses scanned: -
57 Guenter Roeck <linux@roeck-us.net>
61 -----------
63 Chips in this series are multi-phase step-down converters with one or two
68 -----------
[all …]
|
| H A D | ltc4286.rst | 1 .. SPDX-License-Identifier: GPL-2.0-or-later
12 Addresses scanned: -
14 Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4286.pdf
20 Addresses scanned: -
22 Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4287.pdf
28 -----------
31 and LTC4287 Hot-Swap Controller and Digital Power Monitors.
33 LTC4286 and LTC4287 are hot-swap controllers that allow a circuit board
35 current and voltage readback via an integrated 12 bit analog-to-digital
43 -----------
[all …]
|
| H A D | inspur-ipsps1.rst | 1 Kernel driver inspur-ipsps1
11 -----------
17 -----------
19 This driver does not auto-detect devices. You will have to instantiate the
20 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
24 -------------
29 curr1_input Measured input current
44 in1_alarm Input voltage under-voltage alarm.
45 in1_input Measured input voltage in mV.
47 in2_input Measured output voltage in mV.
[all …]
|
| H A D | sysfs-interface.rst | 5 through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
6 completely chip-independent. It assumes that all the kernel drivers
10 This is a major improvement compared to lm-sensors 2.
22 For this reason, even if we aim at a chip-independent libsensors, it will
37 Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
38 in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
48 types for sensor chips are "in" (voltage), "temp" (temperature) and
49 "fan" (fan). Usual items are "input" (measured value), "max" (high
61 to cause an alarm) is chip-dependent.
69 ----------------
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/power/supply/ |
| H A D | rohm,bd99954.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Matti Vaittinen <mazziesaccount@gmail.com>
11 - Markus Laine <markus.laine@fi.rohmeurope.com>
12 - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
15 The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
16 secondary battery intended to be used in space-constraint equipment such
18 provides a Dual-source Battery Charger, two port BC1.2 detection and a
21 $ref: power-supply.yaml#
[all …]
|
| H A D | qcom,pm8941-charger.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm Switch-Mode Battery Charger and Boost
10 - Sebastian Reichel <sre@kernel.org>
15 - qcom,pm8226-charger
16 - qcom,pm8941-charger
23 - description: charge done
24 - description: charge fast mode
[all …]
|
| H A D | maxim,max77693.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Krzysztof Kozlowski <krzk@kernel.org>
21 const: maxim,max77693-charger
23 maxim,constant-microvolt:
25 Battery constant voltage in uV. The charger will operate in fast
26 charge constant current mode till battery voltage reaches this level.
27 Then the charger will switch to fast charge constant voltage mode.
28 Also vsys (system voltage) will be set to this value when DC power is
[all …]
|
| H A D | bq25980.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Andrew Davis <afd@ti.com>
15 for use in high-power density portable electronics. These inductorless
20 - $ref: power-supply.yaml#
25 - ti,bq25980
26 - ti,bq25975
27 - ti,bq25960
32 ti,watchdog-timeout-ms:
[all …]
|
| H A D | bq256xx.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Andrew Davis <afd@ti.com>
14 The bq256xx devices are a family of highly-integrated battery charge
15 management and system power management ICs for single cell Li-ion and Li-
19 - https://www.ti.com/lit/ds/symlink/bq25600.pdf
20 - https://www.ti.com/lit/ds/symlink/bq25601.pdf
21 - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
22 - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/phy/ |
| H A D | qcom,usb-snps-femto-v2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm Synopsys Femto High-Speed USB PHY V2
10 - Wesley Cheng <quic_wcheng@quicinc.com>
13 Qualcomm High-Speed USB PHY
18 - items:
19 - enum:
20 - qcom,sa8775p-usb-hs-phy
[all …]
|
| /openbmc/bmcweb/redfish-core/schema/dmtf/json-schema-installed/ |
| H A D | Power.v1_7_3.json | 4 "$schema": "http://redfish.dmtf.org/schemas/v1/redfish-schema-v1.json",
5 …"copyright": "Copyright 2014-2024 DMTF. For the full DMTF copyright policy, see http://www.dmtf.or…
12 "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": {
31 "description": "The available OEM-specific actions for this resource.",
32 …"longDescription": "This property shall contain the available OEM-specific actions for this resour…
40 "description": "This type describes an input range for a power supply.",
41 …"longDescription": "This type shall describe an input range that the associated power supply can u…
43 "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": {
66 "description": "The Input type (AC or DC).",
67 …"longDescription": "This property shall contain the input type (AC or DC) of the associated range.…
[all …]
|
| /openbmc/bmcweb/redfish-core/schema/dmtf/json-schema/ |
| H A D | Power.v1_7_3.json | 4 "$schema": "http://redfish.dmtf.org/schemas/v1/redfish-schema-v1.json",
5 …"copyright": "Copyright 2014-2024 DMTF. For the full DMTF copyright policy, see http://www.dmtf.or…
12 "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": {
31 "description": "The available OEM-specific actions for this resource.",
32 …"longDescription": "This property shall contain the available OEM-specific actions for this resour…
40 "description": "This type describes an input range for a power supply.",
41 …"longDescription": "This type shall describe an input range that the associated power supply can u…
43 "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": {
66 "description": "The Input type (AC or DC).",
67 …"longDescription": "This property shall contain the input type (AC or DC) of the associated range.…
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/hwmon/ |
| H A D | moortec,mr75203.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Rahul Tanwar <rtanwar@maxlinear.com>
13 A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can
19 *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137).
20 *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138).
21 *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139).
22 *) Delay Chain - ring oscillator connected to the PD, used to measure IO
25 *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then
[all …]
|