| /openbmc/linux/Documentation/devicetree/bindings/regulator/ |
| H A D | tps6586x.txt | 4 - compatible: "ti,tps6586x"
5 - reg: I2C slave address
6 - interrupts: the interrupt outputs of the controller
7 - #gpio-cells: number of cells to describe a GPIO
8 - gpio-controller: mark the device as a GPIO controller
9 - regulators: A node that houses a sub-node for each regulator within the
10 device. Each sub-node is identified using the node's name (or the deprecated
11 regulator-compatible property if present), with valid values listed below.
12 The content of each sub-node is defined by the standard binding for
14 sys, sm[0-2], ldo[0-9] and ldo_rtc
[all …]
|
| H A D | as3722-regulator.txt | 5 --------------------
6 The input supply of regulators are the optional properties on the
7 regulator node. The AS3722 is having 7 DCDC step-down regulators as
8 sd[0-6], 10 LDOs as ldo[0-7], ldo[9-11]. The input supply of these
10 vsup-sd2-supply: Input supply for SD2.
11 vsup-sd3-supply: Input supply for SD3.
12 vsup-sd4-supply: Input supply for SD4.
13 vsup-sd5-supply: Input supply for SD5.
14 vin-ldo0-supply: Input supply for LDO0.
15 vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
[all …]
|
| H A D | tps65090.txt | 4 - compatible: "ti,tps65090"
5 - reg: I2C slave address
6 - interrupts: the interrupt outputs of the controller
7 - regulators: A node that houses a sub-node for each regulator within the
8 device. Each sub-node is identified using the node's name, with valid
9 values listed below. The content of each sub-node is defined by the
11 dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
12 - vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
13 - infet[1-7]-supply: The input supply for FET[1-7] respectively.
14 - vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
[all …]
|
| H A D | regulator-max77620.txt | 3 Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The input supply
6 sub-node "regulators" which is child node of device node.
14 -------------------
15 The input supply of regulators are the optional properties on the
16 parent device node. The input supply of these regulators are provided
18 in-sd0-supply: Input supply for SD0, INA-SD0 or INB-SD0 pins.
19 in-sd1-supply: Input supply for SD1.
20 in-sd2-supply: Input supply for SD2.
21 in-sd3-supply: Input supply for SD3.
22 in-ldo0-1-supply: Input supply for LDO0 and LDO1.
[all …]
|
| H A D | mt6360-regulator.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Gene Chen <gene_chen@richtek.com>
18 const: mediatek,mt6360-regulator
20 LDO_VIN1-supply:
21 description: Input supply phandle(s) for LDO1/2/3
22 LDO_VIN2-supply:
23 description: Input supply phandle(s) for LDO5
[all …]
|
| H A D | ti,tps65219.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jerome Neanne <jerome.neanne@baylibre.com>
18 - ti,tps65219
23 system-power-controller:
29 description: Short-circuit, over-current, under-voltage for regulators, PB interrupts.
32 interrupt-controller: true
34 '#interrupt-cells':
36 include/dt-bindings/interrupt-controller/irq.h
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/ti/omap/ |
| H A D | dra72-evm-tps65917.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
8 * https://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
14 interrupt-controller;
15 #interrupt-cells = <2>;
17 ti,system-power-controller;
20 compatible = "ti,tps65917-pmic";
22 smps1-in-supply = <&vsys_3v3>;
23 smps2-in-supply = <&vsys_3v3>;
24 smps3-in-supply = <&vsys_3v3>;
[all …]
|
| H A D | omap4-epson-embt2ws.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
5 /dts-v1/;
7 #include <dt-bindings/input/input.h>
11 model = "Epson Moverio BT-200";
19 backlight-left {
20 compatible = "pwm-backlight";
22 power-supply = <&unknown_supply>;
25 backlight-right {
26 compatible = "pwm-backlight";
28 power-supply = <&unknown_supply>;
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | dra72-evm-tps65917.dtsi | 2 * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
11 * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
17 interrupt-controller;
18 #interrupt-cells = <2>;
20 ti,system-power-controller;
23 compatible = "ti,tps65917-pmic";
25 smps1-in-supply = <&vsys_3v3>;
26 smps2-in-supply = <&vsys_3v3>;
27 smps3-in-supply = <&vsys_3v3>;
28 smps4-in-supply = <&vsys_3v3>;
[all …]
|
| H A D | axp209.dtsi | 2 * Copyright 2015 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
47 * http://www.x-powers.com/product/AXP20X.php
48 * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
52 compatible = "x-powers,axp209";
53 interrupt-controller;
54 #interrupt-cells = <1>;
56 ac_power_supply: ac-power-supply {
57 compatible = "x-powers,axp202-ac-power-supply";
[all …]
|
| H A D | dra76-evm.dts | 2 * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
8 /dts-v1/;
11 #include "dra7-evm-common.dtsi"
12 #include "dra76x-mmc-iodelay.dtsi"
13 #include <dt-bindings/net/ti-dp83867.h>
17 compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
24 vsys_12v0: fixedregulator-vsys12v0 {
25 /* main supply */
26 compatible = "regulator-fixed";
27 regulator-name = "vsys_12v0";
[all …]
|
| H A D | am57xx-idk-common.dtsi | 2 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
9 #include "am57xx-industrial-grade.dtsi"
18 stdout-path = &uart3;
21 vmain: fixedregulator-vmain {
22 compatible = "regulator-fixed";
23 regulator-name = "VMAIN";
24 regulator-min-microvolt = <5000000>;
25 regulator-max-microvolt = <5000000>;
26 regulator-always-on;
27 regulator-boot-on;
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | ti,tps6594.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Julien Panis <jpanis@baylibre.com>
15 PFSM (Pre-configurable Finite State Machine) managing the state of the device.
16 TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.
21 - ti,lp8764-q1
22 - ti,tps6593-q1
23 - ti,tps6594-q1
29 ti,primary-pmic:
[all …]
|
| H A D | tps65910.txt | 4 - compatible: "ti,tps65910" or "ti,tps65911"
5 - reg: I2C slave address
6 - interrupts: the interrupt outputs of the controller
7 - #gpio-cells: number of cells to describe a GPIO, this should be 2.
10 - gpio-controller: mark the device as a GPIO controller
11 - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
14 Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
15 - regulators: This is the list of child nodes that specify the regulator
20 The regulator is matched with the regulator-compatible.
22 The valid regulator-compatible values are:
[all …]
|
| /openbmc/u-boot/doc/device-tree-bindings/regulator/ |
| H A D | tps65090.txt | 4 - compatible: "ti,tps65090"
5 - reg: I2C slave address
6 - interrupts: the interrupt outputs of the controller
7 - regulators: A node that houses a sub-node for each regulator within the
8 device. Each sub-node is identified using the node's name, with valid
9 values listed below. The content of each sub-node is defined by the
11 dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
12 - vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
13 - infet[1-7]-supply: The input supply for FET[1-7] respectively.
14 - vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mn-ddr3l-evk.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
6 #include "imx8mn-evk.dtsi"
7 #include <dt-bindings/interrupt-controller/irq.h>
11 compatible = "fsl,imx8mn-ddr3l-evk", "fsl,imx8mn";
15 cpu-supply = <&buck1>;
19 cpu-supply = <&buck1>;
23 cpu-supply = <&buck1>;
27 cpu-supply = <&buck1>;
34 pinctrl-names = "default";
[all …]
|
| H A D | imx8mn-evk.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
9 #include "imx8mn-evk.dtsi"
10 #include <dt-bindings/interrupt-controller/irq.h>
14 compatible = "fsl,imx8mn-evk", "fsl,imx8mn";
18 cpu-supply = <&buck2>;
22 cpu-supply = <&buck2>;
26 cpu-supply = <&buck2>;
30 cpu-supply = <&buck2>;
37 pinctrl-names = "default";
[all …]
|
| H A D | imx8mm-emtop-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/usb/pd.h>
15 model = "Emtop Embedded Solutions i.MX8M Mini SOM-IMX8MMLPD4 SoM";
16 compatible = "ees,imx8mm-emtop-som", "fsl,imx8mm";
19 stdout-path = &uart2;
23 compatible = "gpio-leds";
24 pinctrl-names = "default";
[all …]
|
| H A D | imx8mp-debix-som-a.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
11 compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
13 reg_usdhc2_vmmc: regulator-usdhc2 {
14 compatible = "regulator-fixed";
15 pinctrl-names = "default";
16 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
17 regulator-name = "VSD_3V3";
18 regulator-min-microvolt = <3300000>;
19 regulator-max-microvolt = <3300000>;
21 enable-active-high;
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/qcom/ |
| H A D | sm8450-sony-xperia-nagara.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause
6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
7 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
16 /delete-node/ &adsp_mem;
17 /delete-node/ &rmtfs_mem;
18 /delete-node/ &video_mem;
21 chassis-type = "handset";
28 stdout-path = "serial0:115200n8";
31 gpio-keys {
32 compatible = "gpio-keys";
[all …]
|
| H A D | sm8150-hdk.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include <dt-bindings/gpio/gpio.h>
17 compatible = "qcom,sm8150-hdk", "qcom,sm8150";
18 chassis-type = "embedded";
25 stdout-path = "serial0:115200n8";
28 vph_pwr: vph-pwr-regulator {
29 compatible = "regulator-fixed";
30 regulator-name = "vph_pwr";
[all …]
|
| H A D | sm8150-mtp.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
7 /dts-v1/;
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include <dt-bindings/gpio/gpio.h>
18 compatible = "qcom,sm8150-mtp", "qcom,sm8150";
19 chassis-type = "handset";
26 stdout-path = "serial0:115200n8";
29 vph_pwr: vph-pwr-regulator {
30 compatible = "regulator-fixed";
[all …]
|
| H A D | sm8450-qrd.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
20 compatible = "qcom,sm8450-qrd", "qcom,sm8450";
21 chassis-type = "handset";
28 stdout-path = "serial0:115200n8";
31 vph_pwr: vph-pwr-regulator {
32 compatible = "regulator-fixed";
33 regulator-name = "vph_pwr";
34 regulator-min-microvolt = <3700000>;
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/nvidia/ |
| H A D | tegra30-asus-nexus7-grouper-maxim-pmic.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
3 #include <dt-bindings/interrupt-controller/arm-gic.h>
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/mfd/max77620.h>
14 #interrupt-cells = <2>;
15 interrupt-controller;
17 #gpio-cells = <2>;
18 gpio-controller;
20 system-power-controller;
22 pinctrl-names = "default";
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/ti/ |
| H A D | k3-am62-lp-sk.dts | 1 // SPDX-License-Identifier: GPL-2.0
3 * AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP
5 * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
8 /dts-v1/;
10 #include "k3-am62x-sk-common.dtsi"
13 compatible = "ti,am62-lp-sk", "ti,am625";
16 vmain_pd: regulator-0 {
18 compatible = "regulator-fixed";
19 regulator-name = "vmain_pd";
20 regulator-min-microvolt = <5000000>;
[all …]
|