| /openbmc/linux/drivers/staging/media/imx/ |
| H A D | Makefile | 5 imx6-media-objs := imx-media-dev.o imx-media-internal-sd.o \
9 imx6-media-csi-objs := imx-media-csi.o imx-media-fim.o
12 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx6-media.o
13 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx6-media-csi.o
14 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx6-mipi-csi2.o
|
| /openbmc/u-boot/board/logicpd/imx6/ |
| H A D | MAINTAINERS | 4 F: board/logicpd/imx6/
7 F: arch/arm/dts/imx6-logicpd-baseboard.dtsi
8 F: arch/arm/dts/imx6-logicpd-som.dtsi
|
| H A D | Kconfig | 4 default "imx6"
|
| /openbmc/linux/arch/arm/mach-imx/ |
| H A D | Makefile | 50 obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
54 obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
56 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
|
| /openbmc/u-boot/board/gateworks/gw_ventana/ |
| H A D | README | 46 on the board model. The IMX6 BOOT ROM will choose a boot media based on eFUSE
105 More details about the i.MX6 BOOT ROM can be found in the IMX6 reference manual.
110 When the IMX6 eFUSE settings have been factory programmed to boot from
119 For these reasons an MMC device that will be used as an IMX6 primary boot
144 - spl : 1KB-69KB (68KB) required by IMX6 BOOT ROM
155 More details about the i.MX6 BOOT ROM can be found in the IMX6 reference manual.
175 size of available IMX6 iRAM) as well as the fact that this would increase
266 IMX6 BOOT ROM (fixed offset of 1KB), and U-Boot can be loaded by the SPL
|
| /openbmc/u-boot/board/toradex/common/ |
| H A D | tdx-cfg-block.c | 72 [14] = "Colibri iMX6 Solo 256MB",
73 [15] = "Colibri iMX6 DualLite 512MB",
74 [16] = "Colibri iMX6 Solo 256MB IT",
75 [17] = "Colibri iMX6 DualLite 512MB IT",
85 [27] = "Apalis iMX6 Quad 1GB",
86 [28] = "Apalis iMX6 Quad 2GB IT",
87 [29] = "Apalis iMX6 Dual 512MB",
93 [35] = "Apalis iMX6 Dual 1GB IT",
|
| /openbmc/linux/Documentation/admin-guide/media/ |
| H A D | imx.rst | 137 imx6-mipi-csi2
167 MIPI CSI-2 virtual channels from imx6-mipi-csi2 entity. They have a
360 sensor -> imx6-mipi-csi2 -> (ipuX_csiY_mux) -> ...
362 for mipi csi-2 sensors. The imx6-mipi-csi2 receiver may need to route
435 imx6-mipi-csi2 pad 2), is routed to ipu1_csi1. Both sensors are
446 media-ctl -l "'ov5640 1-0040':0 -> 'imx6-mipi-csi2':0[1]"
447 media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
455 media-ctl -V "'imx6-mipi-csi2':2 [fmt:UYVY2X8/640x480 field:none]"
598 media-ctl -l "'ov5640 1-003c':0 -> 'imx6-mipi-csi2':0[1]"
599 media-ctl -l "'imx6-mipi-csi2':1 -> 'ipu1_csi0_mux':0[1]"
[all …]
|
| /openbmc/u-boot/board/toradex/apalis_imx6/ |
| H A D | Kconfig | 43 bool "Apalis iMX6 V1.0 HW"
45 Apalis iMX6 V1.0 HW has a different pinout for the UART.
|
| H A D | MAINTAINERS | 1 Apalis iMX6
|
| /openbmc/u-boot/arch/arm/mach-imx/mx6/ |
| H A D | Kconfig | 109 bool "Toradex Apalis iMX6 board"
149 bool "Toradex Colibri iMX6 board"
450 bool "sks-imx6"
574 source "board/logicpd/imx6/Kconfig"
|
| /openbmc/qemu/include/hw/misc/ |
| H A D | imx6_src.h | 2 * IMX6 System Reset Controller
60 #define TYPE_IMX6_SRC "imx6.src"
|
| H A D | imx6_ccm.h | 2 * IMX6 Clock Control Module
181 #define TYPE_IMX6_CCM "imx6.ccm"
|
| /openbmc/u-boot/drivers/pwm/ |
| H A D | pwm-imx-util.c | 6 * Basic support for the pwm module on imx6.
54 * we have not yet a clock framework for imx6, so add the clock in pwm_imx_get_parms()
|
| H A D | pwm-imx-util.h | 6 * Basic support for the pwm module on imx6.
|
| /openbmc/u-boot/drivers/pinctrl/nxp/ |
| H A D | Kconfig | 22 bool "IMX6 pinctrl driver"
27 Say Y here to enable the imx6 pinctrl driver
|
| /openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx6q-logicpd.dts | 7 #include "imx6-logicpd-som.dtsi"
8 #include "imx6-logicpd-baseboard.dtsi"
|
| H A D | imx6dl-icore-rqs.dts | 14 compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
|
| /openbmc/u-boot/include/configs/ |
| H A D | dh_imx6.h | 3 * DHCOM DH-iMX6 PDK board configuration
25 #include "imx6_spl.h" /* common IMX6 SPL configuration */
|
| H A D | gw_ventana.h | 24 #include "imx6_spl.h" /* common IMX6 SPL configuration */
278 "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
308 "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
|
| /openbmc/u-boot/board/engicam/imx6ul/ |
| H A D | Kconfig | 10 default "imx6-engicam"
|
| /openbmc/u-boot/board/engicam/imx6q/ |
| H A D | Kconfig | 10 default "imx6-engicam"
|
| /openbmc/linux/Documentation/devicetree/bindings/media/i2c/ |
| H A D | tda1997x.txt | 57 - VP[15:0] connected to IMX6 CSI_DATA[19:4] for 16bit YUV422
99 - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656
141 - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656
|
| /openbmc/qemu/hw/arm/ |
| H A D | fsl-imx6.c | 24 #include "hw/arm/fsl-imx6.h"
454 if (!memory_region_init_rom(&s->rom, OBJECT(dev), "imx6.rom", in fsl_imx6_realize()
462 if (!memory_region_init_rom(&s->caam, OBJECT(dev), "imx6.caam", in fsl_imx6_realize()
470 if (!memory_region_init_ram(&s->ocram, NULL, "imx6.ocram", in fsl_imx6_realize()
478 memory_region_init_alias(&s->ocram_alias, OBJECT(dev), "imx6.ocram_alias", in fsl_imx6_realize()
|
| /openbmc/u-boot/board/toradex/colibri_imx6/ |
| H A D | MAINTAINERS | 1 Colibri iMX6
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | imx6q-logicpd.dts | 46 #include "imx6-logicpd-som.dtsi"
47 #include "imx6-logicpd-baseboard.dtsi"
|