| /openbmc/linux/Documentation/devicetree/bindings/display/panel/ |
| H A D | ilitek,ili9163.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Daniel Mack <daniel@zonque.org>
17 - $ref: panel-common.yaml#
18 - $ref: /schemas/spi/spi-peripheral-props.yaml#
23 - enum:
24 - newhaven,1.8-128160EF
25 - const: ilitek,ili9163
27 spi-max-frequency:
[all …]
|
| H A D | ilitek,ili9341.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Ilitek-9341 Display Panel
10 - Dillon Min <dillon.minfei@gmail.com>
18 - $ref: panel-common.yaml#
19 - $ref: /schemas/spi/spi-peripheral-props.yaml#
24 - enum:
25 - adafruit,yx240qv29
26 # ili9341 240*320 Color on stm32f429-disco board
[all …]
|
| H A D | panel-mipi-dbi-spi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Noralf Trønnes <noralf@tronnes.org>
23 - Power:
24 - Vdd: Power supply for display module
25 Called power-supply in this binding.
26 - Vddi: Logic level supply for interface signals
27 Called io-supply in this binding.
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/ |
| H A D | ilitek,ili9486.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
17 - $ref: panel/panel-common.yaml#
22 - enum:
24 - waveshare,rpi-lcd-35
26 - ozzmaker,piscreen
27 - const: ilitek,ili9486
29 spi-max-frequency:
[all …]
|
| H A D | sitronix,st7735r.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - David Lechner <david@lechnology.com>
17 - $ref: panel/panel-common.yaml#
18 - $ref: /schemas/spi/spi-peripheral-props.yaml#
23 - description:
26 - enum:
27 - jianda,jd-t18003-t01
28 - const: sitronix,st7735r
[all …]
|
| H A D | multi-inno,mi0283qt.txt | 1 Multi-Inno MI0283QT display panel
4 - compatible: "multi-inno,mi0283qt".
7 all mandatory properties described in ../spi/spi-bus.txt must be specified.
10 - dc-gpios: D/C pin. The presence/absence of this GPIO determines
12 - present: IM=x110 4-wire 8-bit data serial interface
13 - absent: IM=x101 3-wire 9-bit data serial interface
14 - reset-gpios: Reset pin
15 - power-supply: A regulator node for the supply voltage.
16 - backlight: phandle of the backlight device attached to the panel
17 - rotation: panel rotation in degrees counter clockwise (0,90,180,270)
[all …]
|
| H A D | solomon,ssd1307fb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Maxime Ripard <mripard@kernel.org>
11 - Javier Martinez Canillas <javierm@redhat.com>
17 - enum:
18 - solomon,ssd1305fb-i2c
19 - solomon,ssd1306fb-i2c
20 - solomon,ssd1307fb-i2c
21 - solomon,ssd1309fb-i2c
[all …]
|
| H A D | himax,hx8357d.txt | 7 - compatible: "adafruit,yx350hv15", "himax,hx8357d"
8 - dc-gpios: D/C pin
9 - reg: address of the panel on the SPI bus
12 all mandatory properties described in ../spi/spi-bus.txt must be specified.
15 - rotation: panel rotation in degrees counter clockwise (0,90,180,270)
16 - backlight: phandle of the backlight device attached to the panel
22 spi-max-frequency = <32000000>;
23 dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
|
| /openbmc/linux/Documentation/devicetree/bindings/regulator/ |
| H A D | maxim,max20411.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Maxim Integrated MAX20411 Step-Down DC-DC Converter
10 - Bjorn Andersson <andersson@kernel.org>
13 The MAX20411 is a high-efficiency, DC-DC step-down converter. It provides
18 - $ref: regulator.yaml#
27 enable-gpios:
30 vdd-supply:
34 - compatible
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/power/supply/ |
| H A D | maxim,max8903.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sebastian Reichel <sre@kernel.org>
13 - $ref: power-supply.yaml#
19 dok-gpios:
21 description: Valid DC power has been detected (active low, input)
23 uok-gpios:
27 cen-gpios:
31 chg-gpios:
[all …]
|
| /openbmc/u-boot/doc/device-tree-bindings/video/ |
| H A D | tegra20-dc.txt | 2 ------------------
5 U-Boot, and may change based on Linux activity)
12 - compatible : Should be "nvidia,tegra20-dc"
17 - nvidia,panel : phandle of LCD panel information
24 - nvidia,bits-per-pixel: number of bits per pixel (depth)
25 - nvidia,pwm : pwm to use to set display contrast (see tegra20-pwm.txt)
26 - nvidia,panel-timings: 4 cells containing required timings in ms:
28 * delay between panel_vdd-rise and data-rise
29 * delay between data-rise and backlight_vdd-rise
30 * delay between backlight_vdd and pwm-rise
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/sound/ |
| H A D | cs43130.txt | 5 - compatible : "cirrus,cs43130", "cirrus,cs4399", "cirrus,cs43131",
8 - reg : the I2C address of the device for I2C
10 - VA-supply, VP-supply, VL-supply, VCP-supply, VD-supply:
17 - reset-gpios : Active low GPIO used to reset the device
19 - cirrus,xtal-ibias:
28 - cirrus,dc-measure:
29 Boolean, define to enable headphone DC impedance measurement.
31 - cirrus,ac-measure:
33 DC impedance must also be enabled for AC impedance measurement.
35 - cirrus,dc-threshold:
[all …]
|
| H A D | st,sta350.txt | 7 - compatible: "st,sta350"
8 - reg: the I2C address of the device for I2C
9 - reset-gpios: a GPIO spec for the reset pin. If specified, it will be
12 - power-down-gpios: a GPIO spec for the power down pin. If specified,
16 - vdd-dig-supply: regulator spec, providing 3.3V
17 - vdd-pll-supply: regulator spec, providing 3.3V
18 - vcc-supply: regulator spec, providing 5V - 26V
22 - st,output-conf: number, Selects the output configuration:
23 0: 2-channel (full-bridge) power, 2-channel data-out
24 1: 2 (half-bridge). 1 (full-bridge) on-board power
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/iio/dac/ |
| H A D | adi,ad5758.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Michael Hennerich <Michael.Hennerich@analog.com>
19 spi-cpha: true
21 adi,dc-dc-mode:
25 Mode of operation of the dc-to-dc converter
32 In this mode, the VDPC+ voltage is user-programmable to a fixed level
47 adi,range-microvolt:
51 - items:
[all …]
|
| /openbmc/u-boot/drivers/power/pmic/ |
| H A D | Kconfig | 4 ---help---
5 This config enables the driver-model PMIC support.
6 UCLASS_PMIC - designed to provide an I/O interface for PMIC devices.
7 For the multi-function PMIC devices, this can be used as parent I/O
10 - 'drivers/power/pmic/pmic-uclass.c'
11 - 'include/power/pmic.h'
17 ---help---
21 U-Boot proper.
27 ---help---
35 bool "Enable support for the active-semi 8846 PMIC"
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/amlogic/ |
| H A D | meson-g12b-bananapi-cm4.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include "meson-g12b-a311d.dtsi"
7 #include <dt-bindings/gpio/meson-g12a-gpio.h>
16 stdout-path = "serial0:115200n8";
19 emmc_pwrseq: emmc-pwrseq {
20 compatible = "mmc-pwrseq-emmc";
21 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
29 sdio_pwrseq: sdio-pwrseq {
30 compatible = "mmc-pwrseq-simple";
31 reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/allwinner/ |
| H A D | sunxi-d1s-t113-mangopi-mq-r.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 * Common peripherals and configurations for MangoPi MQ-R boards.
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/leds/common.h>
16 stdout-path = "serial3:115200n8";
20 compatible = "gpio-leds";
22 led-0 {
25 gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
29 /* board wide 5V supply directly from the USB-C socket */
30 reg_vcc5v: regulator-5v {
[all …]
|
| /openbmc/linux/arch/riscv/boot/dts/canaan/ |
| H A D | canaan_kd233.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
7 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
16 compatible = "canaan,kendryte-kd233", "canaan,kendryte-k210";
20 stdout-path = "serial0:115200n8";
23 gpio-leds {
24 compatible = "gpio-leds";
27 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
[all …]
|
| H A D | sipeed_maix_go.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
7 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/leds/common.h>
17 compatible = "sipeed,maix-go", "canaan,kendryte-k210";
21 stdout-path = "serial0:115200n8";
24 gpio-leds {
25 compatible = "gpio-leds";
[all …]
|
| H A D | sipeed_maix_bit.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
7 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/leds/common.h>
17 compatible = "sipeed,maix-bit", "sipeed,maix-bitm",
18 "canaan,kendryte-k210";
22 stdout-path = "serial0:115200n8";
25 gpio-leds {
[all …]
|
| H A D | sipeed_maix_dock.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
7 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/leds/common.h>
17 compatible = "sipeed,maix-dock-m1", "sipeed,maix-dock-m1w",
18 "canaan,kendryte-k210";
22 stdout-path = "serial0:115200n8";
25 gpio-leds {
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/aspeed/ |
| H A D | aspeed-bmc-opp-zaius.dts | 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3 #include "aspeed-g5.dtsi"
4 #include <dt-bindings/gpio/aspeed-gpio.h>
8 compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
19 stdout-path = &uart5;
27 reserved-memory {
28 #address-cells = <1>;
29 #size-cells = <1>;
33 no-map;
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mm-innocomm-wb15-evk.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "imx8mm-innocomm-wb15.dtsi"
12 model = "InnoComm WB15-EVK";
13 compatible = "innocomm,wb15-evk", "fsl,imx8mm";
16 stdout-path = &uart2;
20 compatible = "gpio-leds";
21 pinctrl-names = "default";
22 pinctrl-0 = <&pinctrl_gpio_leds>;
24 led-0 {
[all …]
|
| /openbmc/qemu/include/hw/ |
| H A D | qdev-core.h | 22 * -----------
31 * information to the caller and must be re-entrant.
57 * ---------------
62 * DeviceListener can save the QOpts passed to it for re-using it
73 DEV_NVECTORS_UNSPECIFIED = -1,
101 * struct DeviceClass - The base class for all devices.
107 * @sync_config: Callback function invoked when QMP command device-sync-config
136 * ensures a compile-time error if someone attempts to assign
137 * dc->props directly.
142 * @user_creatable: Can user instantiate with -device / device_add?
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/nuvoton/ |
| H A D | nuvoton-npcm730-gsj.dts | 1 // SPDX-License-Identifier: GPL-2.0
4 /dts-v1/;
5 #include "nuvoton-npcm730.dtsi"
6 #include "nuvoton-npcm730-gsj-gpio.dtsi"
8 #include <dt-bindings/gpio/gpio.h>
31 stdout-path = &serial3;
39 compatible = "gpio-leds";
41 led-bmc-live {
42 gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
43 linux,default-trigger = "heartbeat";
[all …]
|