| /openbmc/linux/Documentation/devicetree/bindings/display/panel/ |
| H A D | ilitek,ili9163.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Daniel Mack <daniel@zonque.org>
17 - $ref: panel-common.yaml#
18 - $ref: /schemas/spi/spi-peripheral-props.yaml#
23 - enum:
24 - newhaven,1.8-128160EF
25 - const: ilitek,ili9163
27 spi-max-frequency:
[all …]
|
| H A D | boe,himax8279d.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jerry Han <jerry.han.hq@gmail.com>
13 - $ref: panel-common.yaml#
18 - const: boe,himax8279d8p
19 - const: boe,himax8279d10p
21 backlight: true
22 enable-gpios: true
25 pp33-gpios:
[all …]
|
| H A D | sharp,lq150x1lg11.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Peter Rosin <peda@axentia.se>
13 - $ref: panel-common.yaml#
19 power-supply: true
20 backlight: true
22 rlud-gpios:
26 If rlud-gpios and/or sellvds-gpios are not specified,
30 sellvds-gpios:
[all …]
|
| H A D | panel-common.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/display/panel/panel-common.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
24 width-mm:
29 height-mm:
43 non-descriptive information. For instance an LCD panel in a system that
55 panel-timing:
[all …]
|
| H A D | samsung,s6d7aa0.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Samsung S6D7AA0 MIPI-DSI LCD panel controller
10 - Artur Weber <aweber.kernel@gmail.com>
13 - $ref: panel-common.yaml#
18 - enum:
20 - samsung,lsl080al02
22 - samsung,lsl080al03
24 - samsung,ltl101at01
[all …]
|
| H A D | mantix,mlaf057we51-x.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel
10 - Guido Günther <agx@sigxcpu.org>
14 a MIPI-DSI video interface.
17 - $ref: panel-common.yaml#
22 - mantix,mlaf057we51-x
23 - ys,ys57pss36bh5gq
[all …]
|
| H A D | himax,hx8394.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Himax HX8394 MIPI-DSI LCD panel controller
10 - Ondrej Jirman <megi@xff.cz>
11 - Javier Martinez Canillas <javierm@redhat.com>
16 a MIPI-DSI video interface.
19 - $ref: panel-common.yaml#
24 - enum:
25 - hannstar,hsd060bhw4
[all …]
|
| H A D | samsung,lms397kf04.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 named DB7430 with a separate backlight controller.
13 - Linus Walleij <linus.walleij@linaro.org>
16 - $ref: panel-common.yaml#
17 - $ref: /schemas/spi/spi-peripheral-props.yaml#
25 reset-gpios: true
27 vci-supply:
31 vccio-supply:
[all …]
|
| H A D | ronbo,rb070d30.yaml | 1 # SPDX-License-Identifier: (GPL-2.0+ OR X11)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Maxime Ripard <mripard@kernel.org>
17 description: MIPI-DSI virtual channel
19 power-gpios:
23 reset-gpios:
27 shlr-gpios:
31 updn-gpios:
35 vcc-lcd-supply:
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/ |
| H A D | ilitek,ili9486.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
17 - $ref: panel/panel-common.yaml#
22 - enum:
24 - waveshare,rpi-lcd-35
26 - ozzmaker,piscreen
27 - const: ilitek,ili9486
29 spi-max-frequency:
[all …]
|
| H A D | sitronix,st7735r.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - David Lechner <david@lechnology.com>
17 - $ref: panel/panel-common.yaml#
18 - $ref: /schemas/spi/spi-peripheral-props.yaml#
23 - description:
26 - enum:
27 - jianda,jd-t18003-t01
28 - const: sitronix,st7735r
[all …]
|
| H A D | multi-inno,mi0283qt.txt | 1 Multi-Inno MI0283QT display panel
4 - compatible: "multi-inno,mi0283qt".
7 all mandatory properties described in ../spi/spi-bus.txt must be specified.
10 - dc-gpios: D/C pin. The presence/absence of this GPIO determines
12 - present: IM=x110 4-wire 8-bit data serial interface
13 - absent: IM=x101 3-wire 9-bit data serial interface
14 - reset-gpios: Reset pin
15 - power-supply: A regulator node for the supply voltage.
16 - backlight: phandle of the backlight device attached to the panel
17 - rotation: panel rotation in degrees counter clockwise (0,90,180,270)
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | ti-lmu.txt | 6 ------ ---------------------------------
7 LM3631 Backlight and regulator
8 LM3632 Backlight and regulator
9 LM3633 Backlight, LED and fault monitor
10 LM3695 Backlight
11 LM36274 Backlight and regulator
14 - compatible: Should be one of:
20 - reg: I2C slave address.
28 - enable-gpios: A GPIO specifier for hardware enable pin.
29 - ramp-up-us: Current ramping from one brightness level to
[all …]
|
| /openbmc/u-boot/doc/device-tree-bindings/video/ |
| H A D | tegra20-dc.txt | 2 ------------------
5 U-Boot, and may change based on Linux activity)
12 - compatible : Should be "nvidia,tegra20-dc"
17 - nvidia,panel : phandle of LCD panel information
24 - nvidia,bits-per-pixel: number of bits per pixel (depth)
25 - nvidia,pwm : pwm to use to set display contrast (see tegra20-pwm.txt)
26 - nvidia,panel-timings: 4 cells containing required timings in ms:
28 * delay between panel_vdd-rise and data-rise
29 * delay between data-rise and backlight_vdd-rise
30 * delay between backlight_vdd and pwm-rise
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/leds/backlight/ |
| H A D | gpio-backlight.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: gpio-backlight
10 - Lee Jones <lee@kernel.org>
11 - Daniel Thompson <daniel.thompson@linaro.org>
12 - Jingoo Han <jingoohan1@gmail.com>
16 const: gpio-backlight
18 gpios:
[all …]
|
| H A D | kinetic,ktd253.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Kinetic Technologies KTD253 and KTD259 one-wire backlight
10 - Linus Walleij <linus.walleij@linaro.org>
14 controlled by a single GPIO line. If you just turn on the backlight
15 it goes to maximum backlight then you can set the level of backlight
20 - $ref: common.yaml#
25 - enum:
[all …]
|
| H A D | pwm-backlight.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: pwm-backlight
10 - Lee Jones <lee@kernel.org>
11 - Daniel Thompson <daniel.thompson@linaro.org>
12 - Jingoo Han <jingoohan1@gmail.com>
16 const: pwm-backlight
21 pwm-names: true
[all …]
|
| H A D | kinetic,ktz8866.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Kinetic Technologies KTZ8866 backlight
10 - Jianhua Lu <lujianhua000@gmail.com>
13 The Kinetic Technologies KTZ8866 is a high efficiency 6-channels-current-sinks
14 led backlight with dual lcd bias power.
15 https://www.kinet-ic.com/ktz8866/
18 - $ref: common.yaml#
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/rockchip/ |
| H A D | rk3566-anbernic-rg353x.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-anbernic-rgxx3.dtsi"
11 backlight: backlight { label
12 compatible = "pwm-backlight";
13 power-supply = <&vcc_sys>;
19 assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/microchip/ |
| H A D | at91sam9n12ek.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
8 /dts-v1/;
12 model = "Atmel AT91SAM9N12-EK";
17 stdout-path = "serial0:115200n8";
26 clock-frequency = <32768>;
30 clock-frequency = <16000000>;
46 compatible = "atmel,tcb-timer";
51 compatible = "atmel,tcb-timer";
63 clock-names = "mclk";
[all …]
|
| H A D | at91-sama5d4_ma5d4evk.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include "at91-sama5d4_ma5d4.dtsi"
14 stdout-path = "serial3:115200n8";
19 atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
20 pinctrl-names = "default";
21 pinctrl-0 = <&pinctrl_usba_vbus>;
26 num-ports = <3>;
27 atmel,vbus-gpio = <0
42 hlcdc-display-controller {
[all …]
|
| /openbmc/linux/arch/mips/boot/dts/ingenic/ |
| H A D | rs90.dts | 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/iio/adc/ingenic,adc.h>
8 #include <dt-bindings/input/linux-event-codes.h>
12 model = "RS-90";
19 reserved-memory {
20 #address-cells = <1>;
21 #size-cells = <1>;
24 vmem: video-memory@1f00000 {
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/auxdisplay/ |
| H A D | hit,hd44780.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Geert Uytterhoeven <geert@linux-m68k.org>
15 interface, which can be used in either 4-bit or 8-bit mode. By using a
24 data-gpios:
26 GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or
27 DB4-DB7 (4-bit mode) of the LCD Controller's bus interface.
29 - maxItems: 4
30 - maxItems: 8
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | at91sam9n12ek.dts | 2 * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
9 /dts-v1/;
13 model = "Atmel AT91SAM9N12-EK";
18 stdout-path = "serial0:115200n8";
19 u-boot,dm-pre-reloc;
28 clock-frequency = <32768>;
32 clock-frequency = <16000000>;
39 u-boot,dm-pre-reloc;
54 clock-names = "mclk";
60 interrupt-parent = <&pioA>;
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx6qdl-udoo.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/gpio/gpio.h>
12 backlight = &backlight;
19 stdout-path = &uart2;
22 backlight: backlight { label
23 compatible = "gpio-backlight";
24 gpios = <&gpio1 4 0>;
25 default-on;
29 gpio-poweroff {
30 compatible = "gpio-poweroff";
[all …]
|