Home
last modified time | relevance | path

Searched +full:aux +full:- +full:gpios (Results 1 – 25 of 139) sorted by relevance

123456

/openbmc/linux/Documentation/devicetree/bindings/spi/
H A Dbrcm,bcm2835-aux-spi.txt8 - compatible: Should be "brcm,bcm2835-aux-spi".
9 - reg: Should contain register location and length for the spi block
10 - interrupts: Should contain shared interrupt of the aux block
11 - clocks: The clock feeding the SPI controller - needs to
15 - cs-gpios: the cs-gpios (native cs is NOT supported)
16 see also spi-bus.txt
21 compatible = "brcm,bcm2835-aux-spi";
25 #address-cells = <1>;
26 #size-cells = <0>;
27 cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>;
[all …]
/openbmc/linux/Documentation/devicetree/bindings/leds/
H A Dkinetic,ktd2692.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Markuss Broks <markuss.broks@gmail.com>
13 KTD2692 is the ideal power solution for high-power flash LEDs.
14 It uses ExpressWire single-wire programming for maximum flexibility.
20 Also, When the AUX pin is pulled high while CTRL pin is high,
21 LED current will be ramped up to the flash-mode current level.
27 ctrl-gpios:
31 aux-gpios:
[all …]
/openbmc/linux/Documentation/devicetree/bindings/display/bridge/
H A Dps8640.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Nicolas Boichat <drinkcat@chromium.org>
13 The PS8640 is a low power MIPI-to-eDP video format converter supporting
28 powerdown-gpios:
32 reset-gpios:
36 vdd12-supply:
39 vdd33-supply:
42 aux-bus:
[all …]
H A Dti,sn65dsi86.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sandeep Panda <spanda@codeaurora.org>
23 enable-gpios:
27 suspend-gpios:
31 no-hpd:
37 vccio-supply:
40 vpll-supply:
43 vcca-supply:
[all …]
H A Danalogix,anx7625.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Xin Ji <xji@analogixsemi.com>
14 The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
28 enable-gpios:
32 reset-gpios:
36 vdd10-supply:
39 vdd18-supply:
42 vdd33-supply:
[all …]
/openbmc/linux/Documentation/devicetree/bindings/display/panel/
H A Dpanel-edp.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences
10 - Douglas Anderson <dianders@chromium.org>
14 to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without
17 board, either for second-sourcing purposes or to support multiple SKUs
21 represented under the DP AUX bus. This means that we can use any
22 information provided by the DP AUX bus (including the EDID) to identify
[all …]
/openbmc/linux/Documentation/devicetree/bindings/pci/
H A Dqcom,pcie-ep.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
15 - enum:
16 - qcom,sdx55-pcie-ep
17 - qcom,sm8450-pcie-ep
18 - items:
19 - const: qcom,sdx65-pcie-ep
[all …]
H A Dintel,keembay-pcie.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
11 - Srikanth Thokala <srikanth.thokala@intel.com>
14 - $ref: /schemas/pci/pci-bus.yaml#
18 const: intel,keembay-pcie
23 reset-gpios:
29 reg-names:
[all …]
H A Dqcom,pcie.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Bjorn Andersson <bjorn.andersson@linaro.org>
11 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
20 - enum:
21 - qcom,pcie-apq8064
22 - qcom,pcie-apq8084
23 - qcom,pcie-ipq4019
24 - qcom,pcie-ipq6018
[all …]
H A Dhisilicon-histb-pcie.txt6 Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
11 - compatible: Should be one of the following strings:
12 "hisilicon,hi3798cv200-pcie"
13 - reg: Should contain sysctl, rc_dbi, config registers location and length.
14 - reg-names: Must include the following entries:
16 "rc-dbi": configuration space of PCIe controller;
18 - bus-range: PCI bus numbers covered.
19 - interrupts: MSI interrupt.
20 - interrupt-names: Must include "msi" entries.
21 - clocks: List of phandle and clock specifier pairs as listed in clock-names
[all …]
/openbmc/linux/arch/arm/boot/dts/ti/omap/
H A Domap5-sbc-t54.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Suppport for CompuLab CM-T54 on SB-T54 baseboard
6 #include "omap5-cm-t54.dts"
9 model = "CompuLab CM-T54 on SB-T54";
10 compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
14 i2c4_pins: i2c4-pins {
15 pinctrl-single,pins = <
21 mmc1_aux_pins: mmc1-aux-pins {
22 pinctrl-single,pins = <
30 pinctrl-names = "default";
[all …]
H A Domap3-sbc-t3517.dts1 // SPDX-License-Identifier: GPL-2.0
3 * Suppport for CompuLab SBC-T3517 with CM-T3517
6 #include "omap3-cm-t3517.dts"
7 #include "omap3-sb-t35.dtsi"
10 model = "CompuLab SBC-T3517 with CM-T3517";
11 compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
18 /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
19 vddvario: regulator-vddvario-sb-t35 {
20 compatible = "regulator-fixed";
21 regulator-name = "vddvario";
[all …]
H A Domap3-gta04.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
5 * Based on omap3-beagle-xm.dts
7 /dts-v1/;
10 #include <dt-bindings/input/input.h>
17 cpu0-supply = <&vcc>;
27 stdout-path = &uart3;
33 /delete-property/ mmc2;
34 /delete-property/ mmc3;
38 compatible = "regulator-fixed";
39 regulator-name = "ldo_3v3";
[all …]
/openbmc/linux/arch/arm64/boot/dts/freescale/
H A Dimx8mq-zii-ultra-rmb3.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 /dts-v1/;
8 #include "imx8mq-zii-ultra.dtsi"
12 compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
15 compatible = "simple-audio-card";
16 simple-audio-card,name = "front";
17 simple-audio-card,format = "i2s";
18 simple-audio-card,bitclock-master = <&sound1_codec>;
19 simple-audio-card,frame-master = <&sound1_codec>;
20 simple-audio-card,widgets =
[all …]
/openbmc/linux/drivers/gpu/drm/msm/dp/
H A Ddp_power.h1 /* SPDX-License-Identifier: GPL-2.0-only */
3 * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
12 * sruct dp_power - DisplayPort's power related data
14 * @init: initializes the regulators/core clocks/GPIOs/pinctrl
15 * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
26 * dp_power_init() - enable power supplies for display controller
32 * aux/hpd.
37 * dp_power_deinit() - turn off regulators and gpios.
47 * dp_power_clk_status() - display controller clocks status
59 * dp_power_clk_enable() - enable display controller clocks
[all …]
/openbmc/linux/arch/arm64/boot/dts/rockchip/
H A Drk3566-anbernic-rg503.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-anbernic-rgxx3.dtsi"
21 compatible = "simple-battery";
22 charge-full-design-microamp-hours = <3472000>;
23 charge-term-current-microamp = <300000>;
24 constant-charge-current-max-microamp = <2000000>;
[all …]
H A Drk3566-anbernic-rg353p.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-anbernic-rg353x.dtsi"
22 compatible = "simple-battery";
23 charge-full-design-microamp-hours = <3472000>;
24 charge-term-current-microamp = <300000>;
25 constant-charge-current-max-microamp = <2000000>;
[all …]
H A Drk3566-anbernic-rg353ps.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-anbernic-rg353x.dtsi"
21 compatible = "simple-battery";
22 charge-full-design-microamp-hours = <3472000>;
23 charge-term-current-microamp = <300000>;
24 constant-charge-current-max-microamp = <2000000>;
[all …]
/openbmc/linux/drivers/gpu/drm/bridge/
H A Dti-sn65dsi86.c1 // SPDX-License-Identifier: GPL-2.0
134 * struct ti_sn65dsi86 - Platform data for ti-sn65dsi86 driver.
135 * @bridge_aux: AUX-bus sub device for MIPI-to-eDP bridge functionality.
136 * @gpio_aux: AUX-bus sub device for GPIO controller functionality.
137 * @aux_aux: AUX-bus sub device for eDP AUX channel functionality.
138 * @pwm_aux: AUX-bus sub device for PWM controller functionality.
142 * @aux: Our aux channel.
153 * @ln_polrs: Value for the 4-bit LN_POLRS field of SN_ENH_FRAME_REG.
154 * @comms_enabled: If true then communication over the aux channel is enabled.
157 * @gchip: If we expose our GPIOs, this is used.
[all …]
/openbmc/linux/arch/arm64/boot/dts/qcom/
H A Dsc7180-trogdor-parade-ps8640.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/gpio/gpio.h>
11 pp3300_brij_ps8640: pp3300-brij-ps8640-regulator {
12 compatible = "regulator-fixed";
14 regulator-name = "pp3300_brij_ps8640";
16 regulator-min-microvolt = <3300000>;
17 regulator-max-microvolt = <3300000>;
20 enable-active-high;
22 pinctrl-names = "default";
23 pinctrl-0 = <&en_pp3300_edp_brij_ps8640>;
[all …]
H A Dsc7180-trogdor-ti-sn65dsi86.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/gpio/gpio.h>
17 off-on-delay-us = <500000>;
23 * This should help speed bootup because we have off-on-delay-us.
25 regulator-boot-on;
32 clock-frequency = <400000>;
37 pinctrl-names = "default";
38 pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
39 gpio-controller;
40 #gpio-cells = <2>;
[all …]
/openbmc/u-boot/arch/arm/dts/
H A Dam335x-brppt1-spi.dts1 // SPDX-License-Identifier: GPL-2.0+
4 * http://www.br-automation.com
7 /dts-v1/;
15 fset: factory-settings {
16 bl-version = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
18 order-no = "6PPT30 (SPI)";
19 hw-revision = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
20 serial-no = "0";
21 device-id = <0x0>;
22 parent-id = <0x0>;
[all …]
/openbmc/linux/Documentation/devicetree/bindings/iio/frequency/
H A Dadi,adf4350.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Michael Hennerich <michael.hennerich@analog.com>
15 - adi,adf4350
16 - adi,adf4351
21 spi-max-frequency:
28 clock-names:
31 gpios:
35 adi,channel-spacing:
[all …]
/openbmc/linux/arch/arm64/boot/dts/amlogic/
H A Dmeson-g12b-gtking-pro.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b-w400.dtsi"
11 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
15 model = "Beelink GT-King Pro";
22 gpio-keys-polled {
23 compatible = "gpio-keys-polled";
24 poll-interval = <100>;
26 power-button {
29 gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
[all …]
/openbmc/linux/arch/mips/boot/dts/ingenic/
H A Drs90.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/iio/adc/ingenic,adc.h>
8 #include <dt-bindings/input/linux-event-codes.h>
12 model = "RS-90";
19 reserved-memory {
20 #address-cells = <1>;
21 #size-cells = <1>;
24 vmem: video-memory@1f00000 {
[all …]

123456