/openbmc/u-boot/doc/device-tree-bindings/pinctrl/ |
H A D | marvell,armada-cp110-pinctrl.txt | 20 13 DEV_BURSTn NF_RBn[0] SPI1_MISO GE0_RXCTL 34 27 DEV_CSn[0] SPI1_MISO MSS_GPIO[4] GE0_RXD[3] 84 10 SPI1_MISO UART0_CTS SATA1_PRESENT_ACTIVEn 123 49 SPI1_MISO - UART1_RXD
|
/openbmc/u-boot/arch/arm/mach-at91/arm926ejs/ |
H A D | at91sam9261_devices.c | 94 at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */ in at91_spi1_hw_init()
|
H A D | at91sam9n12_devices.c | 74 at91_pio3_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ in at91_spi1_hw_init()
|
H A D | at91sam9m10g45_devices.c | 95 at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_MISO */ in at91_spi1_hw_init()
|
H A D | at91sam9263_devices.c | 98 at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */ in at91_spi1_hw_init()
|
H A D | at91sam9x5_devices.c | 138 at91_pio3_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ in at91_spi1_hw_init()
|
H A D | at91sam9260_devices.c | 97 at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */ in at91_spi1_hw_init()
|
/openbmc/linux/arch/arm/boot/dts/microchip/ |
H A D | at91-sama5d3_ksz9477_evb.dts | 204 /* SPI1_MISO */
|
/openbmc/linux/drivers/pinctrl/vt8500/ |
H A D | pinctrl-vt8500.c | 195 PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"), 334 "spi1_miso",
|
H A D | pinctrl-wm8505.c | 300 PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"), 448 "spi1_miso",
|
/openbmc/linux/arch/arm/boot/dts/ti/keystone/ |
H A D | keystone-k2g-evm.dts | 181 K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_miso.spi1_miso */
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | zynqmp-zcu100-revC.dts | 137 "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1",
|
/openbmc/linux/arch/arm/boot/dts/st/ |
H A D | stm32h7-pinctrl.dtsi | 196 /* SPI1_MISO */
|
/openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | mediatek,mt7981-pinctrl.yaml | 340 SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI,
|
H A D | mediatek,mt7986-pinctrl.yaml | 278 SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI,
|
/openbmc/linux/drivers/pinctrl/stm32/ |
H A D | pinctrl-stm32f769.c | 99 STM32_FUNCTION(6, "SPI1_MISO"), 277 STM32_FUNCTION(6, "SPI1_MISO"), 1229 STM32_FUNCTION(6, "SPI1_MISO"),
|
H A D | pinctrl-stm32h743.c | 106 STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"), 305 STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"), 1353 STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"),
|
H A D | pinctrl-stm32mp257.c | 711 STM32_FUNCTION(3, "SPI1_MISO I2S1_SDI"), 990 STM32_FUNCTION(3, "SPI1_MISO I2S1_SDI"), 1372 STM32_FUNCTION(4, "SPI1_MISO I2S1_SDI"), 1769 STM32_FUNCTION(3, "SPI1_MISO I2S1_SDI"),
|
H A D | pinctrl-stm32f469.c | 93 STM32_FUNCTION(6, "SPI1_MISO"), 240 STM32_FUNCTION(6, "SPI1_MISO"),
|
H A D | pinctrl-stm32f746.c | 96 STM32_FUNCTION(6, "SPI1_MISO"), 248 STM32_FUNCTION(6, "SPI1_MISO"),
|
/openbmc/linux/arch/arm64/boot/dts/xilinx/ |
H A D | zynqmp-zcu100-revC.dts | 147 "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1",
|
/openbmc/linux/Documentation/firmware-guide/acpi/ |
H A D | gpio-properties.rst | 216 "MUX7_IO", "LVL_C_A1", "MUX0_IO", "SPI1_MISO",
|
/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | am335x-boneblue.dts | 563 "SPI1_MISO", /* B13 */
|
/openbmc/linux/arch/arm64/boot/dts/qcom/ |
H A D | apq8016-sbc.dts | 457 "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
|
/openbmc/linux/drivers/pinctrl/meson/ |
H A D | pinctrl-meson-g12a.c | 711 GROUP(spi1_miso, 3), 1000 "spi1_mosi", "spi1_miso", "spi1_ss0", "spi1_clk",
|