Home
last modified time | relevance | path

Searched full:mx7d (Results 1 – 25 of 26) sorted by relevance

12

/openbmc/u-boot/arch/arm/mach-imx/mx7/
H A DKconfig13 config MX7D config
27 select MX7D
36 select MX7D
44 select MX7D
53 select MX7D
H A Dsoc.c183 * i.MX7D TO1.0 ENET MDIO pin has no open drain, but TO1.1 supports in imx_enet_mdio_fixup()
/openbmc/linux/arch/arm/mach-imx/
H A Dsrc.c31 /* below is for i.MX7D */
91 * The motivation for bringing up the second i.MX7D core inside the kernel
95 * one CPU of the i.MX7D would be brought up.
96 * Bring up the second i.MX7D core inside the kernel to make the migration
114 pr_err("i.MX7D: CORE1_A7 power up timeout\n"); in imx_gpcv2_set_core1_pdn_pup_by_software()
H A Danatop.c114 * On i.MX7D digprog value match linux version format, so in imx_init_revision_from_anatop()
/openbmc/u-boot/doc/imx/habv4/guides/
H A Dmx6_mx7_secure_boot.txt174 | | i.MX6 Series | i.MX7D/S | i.MX7ULP |
238 | i.MX7D/S | bank 1 word 3 | 0x02000000 |
275 | i.MX7D/S | bank 0 word 0 | 0x00000200 |
283 | i.MX7D/S | bank 1 word 3 | 0x08000000 |
291 | i.MX7D/S | bank 1 word 3 | 0x00200000 |
299 | i.MX7D/S | bank 1 word 3 | 0x00C00000 |
/openbmc/u-boot/configs/
H A Dcolibri_imx7_emmc_defconfig13 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D"
H A Dcolibri_imx7_defconfig12 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D"
/openbmc/linux/Documentation/devicetree/bindings/arm/
H A Dfsl.yaml835 - description: i.MX7D based Boards
845 - remarkable,imx7d-remarkable2 # i.MX7D ReMarkable 2 E-Ink Tablet
846 - storopack,imx7d-smegw01 # Storopack i.MX7D SMEGW01
847 - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf
848 - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit
849 - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph
850 - technexion,imx7d-pico-pi # TechNexion i.MX7D Pico-Pi
874 - description: i.MX7D Boards with Toradex Colibri i.MX7D Module
884 - description: i.MX7D Boards with Toradex Colibri i.MX7D 1GB (eMMC) Module
/openbmc/linux/Documentation/devicetree/bindings/nvmem/
H A Dimx-ocotp.yaml15 i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93 SoCs.
/openbmc/u-boot/arch/arm/mach-imx/
H A Dimx_bootaux.c55 * To i.MX6SX and i.MX7D, the image supported by bootaux needs
/openbmc/u-boot/drivers/pinctrl/nxp/
H A DKconfig44 i.MX7D. This feature depends on device tree
/openbmc/linux/Documentation/devicetree/bindings/pinctrl/
H A Dfsl,imx7d-pinctrl.yaml48 refer to i.MX7D Reference Manual for detailed CONFIG settings.
/openbmc/u-boot/arch/arm/include/asm/mach-imx/
H A Drdc-sema.h32 /* The Following macro definitions are common to i.MX6SX and i.MX7D */
/openbmc/u-boot/include/configs/
H A Dpico-imx7d.h5 * Configuration settings for the i.MX7D Pico board.
H A Dmx7dsabresd.h5 * Configuration settings for the Freescale i.MX7D SABRESD board.
/openbmc/linux/drivers/usb/dwc3/
H A Ddwc3-haps.c116 * i.MX6QP and i.MX7D platform use a PCIe controller with the
/openbmc/linux/drivers/soc/imx/
H A Dsoc-imx.c119 soc_id = "i.MX7D"; in imx_soc_device_init()
/openbmc/u-boot/arch/arm/include/asm/arch-mx7/
H A Dclock.h42 /* PLL supported by i.mx7d */
/openbmc/u-boot/board/technexion/pico-imx7d/
H A Dpico-imx7d.c335 puts("Board: i.MX7D PICOSOM\n"); in checkboard()
/openbmc/u-boot/board/freescale/mx7dsabresd/
H A Dmx7dsabresd.c376 printf("Board: i.MX7D SABRESD in %s mode\n", mode); in checkboard()
/openbmc/linux/drivers/watchdog/
H A Dimx2_wdt.c338 * The i.MX7D doesn't support low power mode, so we need to ping the watchdog in imx2_wdt_probe()
/openbmc/linux/drivers/iio/adc/
H A Dimx7d_adc.c3 * Freescale i.MX7D ADC driver
/openbmc/u-boot/env/
H A DKconfig157 default y if MX6SX || MX7D
/openbmc/linux/drivers/usb/chipidea/
H A Dusbmisc_imx.c480 * For SoCs like i.MX7D and later, each USB controller has in usbmisc_imx6_hsic_get_reg_offset()
481 * its own non-core register region. For SoCs before i.MX7D, in usbmisc_imx6_hsic_get_reg_offset()
/openbmc/linux/arch/arm/
H A DKconfig.debug505 bool "i.MX7D Debug UART"
509 on i.MX7D.

12