Home
last modified time | relevance | path

Searched +full:3 +full:wire (Results 1 – 25 of 657) sorted by relevance

12345678910>>...27

/openbmc/linux/include/linux/mfd/
H A Dmotorola-cpcap.h31 #define CPCAP_REG_INT3 0x0008 /* Interrupt 3 */
35 #define CPCAP_REG_INTM3 0x0018 /* Interrupt Mask 3 */
39 #define CPCAP_REG_INTS3 0x0028 /* Interrupt Sense 3 */
43 #define CPCAP_REG_ASSIGN3 0x0038 /* Resource Assignment 3 */
63 #define CPCAP_REG_MT3 0x0234 /* Memory Transfer 3 */
86 #define CPCAP_REG_S3C 0x061c /* Switcher 3 Control */
129 #define CPCAP_REG_MIPIS3 0x0840 /* MIPI Slimbus 3. */
148 #define CPCAP_REG_ADCD3 0x0c14 /* A/D Converter Data 3 */
158 #define CPCAP_REG_USBC3 0x0e08 /* USB Control 3 */
165 #define CPCAP_REG_UFC3 0x0e24 /* ULPI Function Control 3 */
[all …]
/openbmc/linux/Documentation/devicetree/bindings/iio/temperature/
H A Dmaxim,max31865.yaml22 maxim,3-wire:
25 enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
51 maxim,3-wire;
/openbmc/linux/Documentation/devicetree/bindings/display/panel/
H A Dtpo,tpg110.yaml17 and other properties, and has a control interface over 3WIRE
39 protocol is not I2C but 3WIRE SPI.
61 spi-3wire: true
72 - spi-3wire
87 spi-3wire;
88 /* 320 ns min period ~= 3 MHz */
H A Dleadtek,ltk035c5444t.yaml27 spi-3wire: true
47 spi-3wire;
H A Dkingdisplay,kd035g6-54nt.yaml26 spi-3wire: true
48 spi-3wire;
/openbmc/linux/drivers/iio/common/st_sensors/
H A Dst_sensors_spi.c33 * st_sensors_is_spi_3_wire() - check if SPI 3-wire mode has been selected
36 * Return: true if SPI 3-wire mode is selected, false otherwise.
43 if (device_property_read_bool(dev, "spi-3wire")) in st_sensors_is_spi_3_wire()
54 * st_sensors_configure_spi_3_wire() - configure SPI 3-wire if needed
/openbmc/linux/sound/ppc/
H A Dsnd_ps3_reg.h39 * three wire serial
40 * n:0..3
84 #define PS3_AUDIO_INTR_0_CHAN3 PS3_AUDIO_INTR_0_CHAN(3)
130 /* 3 Wire Audio Serial Output Channel Mutes (0..3) */
131 #define PS3_AUDIO_AX_MCTRL_ASOMT(n) (1 << (3 - (n))) /* RWIVF */
135 #define PS3_AUDIO_AX_MCTRL_ASO0MT (1 << 3) /* RWIVF */
142 /* All 3 Wire Serial Outputs Mute */
180 3 Wire Audio Serial Outputs Buffer Read/Write
191 3 Wire Audio Serial Output Channel Buffer Read Numbers
193 Controller of 3 Wire Audio Serial Output Channels
[all …]
/openbmc/linux/Documentation/devicetree/bindings/spi/
H A Dicpdas-lp8841-spi-rtc.txt28 - spi-3wire: The master itself has only 3 wire. It cannor work in
50 spi-3wire;
/openbmc/linux/include/linux/platform_data/
H A Dusb-omap1.h36 * 3 == 3 wire bidirectional
37 * 4 == 4 wire bidirectional
38 * 6 == 6 wire unidirectional (or TLL)
40 u8 pins[3];
/openbmc/linux/Documentation/devicetree/bindings/interrupt-controller/
H A Dintel,ce4100-lapic.yaml28 [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
42 intel,virtual-wire-mode:
47 Virtual Wire Mode - use lapic as virtual wire interrupt delivery mode.
52 mode is configured to virtual wire compatibility mode.
70 intel,virtual-wire-mode;
/openbmc/linux/arch/sh/include/mach-common/mach/
H A Dhighlander.h17 #define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
62 #define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */
63 #define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */
64 #define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */
65 #define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
66 #define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
86 #define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
114 #define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */
115 #define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */
116 #define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */
[all …]
/openbmc/linux/drivers/w1/
H A DKconfig3 tristate "Dallas's 1-wire support"
6 Dallas' 1-wire bus is useful to connect slow 1-pin devices
12 will be called wire.
27 3. Replies to userspace commands.
/openbmc/linux/include/linux/sunrpc/
H A Dauth_gss.h29 RPC_GSS_PROC_DESTROY = 3
35 RPC_GSS_SVC_PRIVACY = 3
38 /* on-the-wire gss cred: */
47 /* on-the-wire gss verifier: */
66 * the wire when communicating with a server. */
/openbmc/linux/drivers/w1/masters/
H A Dds2482.c7 * It is a I2C to 1-wire bridge.
8 * There are two variations: -100 and -800, which have 1 or 8 1-wire ports.
27 * a 1-Wire line from low to high. When APU = 0, active pullup is disabled
29 * only a single slave on the 1-Wire line.
39 MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
42 * The DS2482 registers - there are 3 registers that are addressed by a read
69 #define DS2482_REG_CFG_1WS 0x08 /* 1-wire speed */
112 /* 1-wire interface(s) */
199 * 1-Wire interface code
205 * ds2482_wait_1wire_idle - Waits until the 1-wire interface is idle (not busy)
[all …]
/openbmc/openbmc/meta-raspberrypi/recipes-connectivity/bluez5/bluez5/
H A D0001-bcm43xx-Add-bcm43xx-3wire-variant.patch4 Subject: [PATCH] bcm43xx: Add bcm43xx-3wire variant
9 tools/hciattach.c | 3 +++
10 1 file changed, 3 insertions(+)
20 + { "bcm43xx-3wire", 0x0000, 0x0000, HCI_UART_3WIRE, 115200, 3000000,
/openbmc/linux/Documentation/devicetree/bindings/input/touchscreen/
H A Dti,am3359-tsc.yaml17 description: Wires refer to application modes i.e. 4/5/8 wire touchscreen
36 ti,wire-config:
42 and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3.
63 - ti,wire-config
74 ti,wire-config = <0x00 0x11 0x22 0x33>;
/openbmc/linux/Documentation/devicetree/bindings/iio/addac/
H A Dadi,ad74115.yaml63 3 - Voltage input
84 3 - AGND to AGND
86 maximum: 3
200 adi,4-wire-rtd:
203 When not present, the ADC should be used for measuring 3-wire RTDs.
204 When present, the ADC should be used for measuring 4-wire RTDs.
206 adi,3-wire-rtd-excitation-swap:
208 description: Whether to swap the excitation for 3-wire RTD.
268 3 - Control HART CD
282 3 - Control HART RXD
[all …]
/openbmc/linux/net/rxrpc/
H A Doutput.c138 return txb->ack.nAcks + 3 + sizeof(trailer); in rxrpc_fill_out_ack()
209 txb->wire.flags |= RXRPC_REQUEST_ACK; in rxrpc_send_ack_packet()
215 iov[0].iov_base = &txb->wire; in rxrpc_send_ack_packet()
216 iov[0].iov_len = sizeof(txb->wire) + sizeof(txb->ack) + n; in rxrpc_send_ack_packet()
220 txb->wire.serial = htonl(serial); in rxrpc_send_ack_packet()
241 trace_rxrpc_tx_packet(call->debug_id, &txb->wire, in rxrpc_send_ack_packet()
243 if (txb->wire.flags & RXRPC_REQUEST_ACK) in rxrpc_send_ack_packet()
338 txb->wire.serial = htonl(serial); in rxrpc_send_data_packet()
342 txb->wire.userStatus = RXRPC_USERSTATUS_SERVICE_UPGRADE; in rxrpc_send_data_packet()
344 iov[0].iov_base = &txb->wire; in rxrpc_send_data_packet()
[all …]
/openbmc/linux/Documentation/devicetree/bindings/display/
H A Dmulti-inno,mi0283qt.txt11 the panel interface mode (IM[3:0] pins):
12 - present: IM=x110 4-wire 8-bit data serial interface
13 - absent: IM=x101 3-wire 9-bit data serial interface
/openbmc/u-boot/doc/device-tree-bindings/spi/
H A Dspi-bus.txt56 - spi-3wire - (optional) Empty property indicating device requires
57 3-wire mode.
69 Dual/Quad mode is not allowed when 3-wire mode is used.
/openbmc/linux/Documentation/hwmon/
H A Dlm85.rst92 The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
93 specification. Using an analog to digital converter it measures three (3)
96 VID signals from the processor to the VRM. Lastly, there are three (3) PWM
132 speed of a two wire fan, but the input conditioning circuitry is different
133 for 3-wire and 2-wire mode. For this reason, the 2-wire fan modes are not
155 all 3 PWM outputs to a 22.5 kHz frequency. Conversely, setting any PWM
156 frequency below 11.3 kHz will switch all 3 PWM outputs to a frequency
185 The LM85 can be jumpered for 3 different SMBus addresses. There are
213 sensors and therefore three zones (# 1, 2 and 3). Each zone has the following
262 3 Controlled by Zone 3
[all …]
/openbmc/linux/Documentation/devicetree/bindings/rtc/
H A Dmaxim-ds1302.txt22 - spi-3wire : The device has a shared signal IN/OUT line.
42 spi-3wire;
/openbmc/u-boot/arch/arm/mach-at91/include/mach/
H A Dsama5d4.h18 #define ATMEL_ID_PIT 3 /* Periodic Interval Timer */
43 #define ATMEL_ID_USART3 30 /* USART 3 */
45 #define ATMEL_ID_TWI0 32 /* Two-Wire Interface 0 */
46 #define ATMEL_ID_TWI1 33 /* Two-Wire Interface 1 */
47 #define ATMEL_ID_TWI2 34 /* Two-Wire Interface 2 */
54 #define ATMEL_ID_TC1 41 /* Timer Counter 1 (ch. 3, 4, 5) */
73 #define ATMEL_ID_TWI3 62 /* Two-Wire Interface 3 */
178 #define H64MX_SLAVE_DDRC_PORT0 3 /* DDR2 Port0-AESOTF */
193 #define H32MX_SLAVE_EBI 3 /* External Bus Interface */
194 #define H32MX_SLAVE_NFC_CMD 3 /* NFC command Register */
/openbmc/linux/Documentation/devicetree/bindings/clock/
H A Dti,lmk04832.yaml49 ti,spi-4wire-rdbk:
51 Select SPI 4wire readback pin configuration.
77 SYSREF Continuous 3
79 enum: [0, 1, 2, 3]
80 default: 3
182 ti,spi-4wire-rdbk = <0>;
187 <&lmk04832 2>, <&lmk04832 3>,
/openbmc/linux/drivers/bluetooth/
H A DKconfig187 bool "Three-wire UART (H5) protocol support"
191 The HCI Three-wire UART Transport Layer makes it possible to
193 Three-wire UART Transport Layer assumes that the UART
197 Say Y here to compile support for Three-wire UART protocol.
234 The Realtek protocol support enables Bluetooth HCI over 3-Wire
344 3Com BT3C interface:
345 3Com Bluetooth Card (3CRWB6096)

12345678910>>...27