Home
last modified time | relevance | path

Searched +full:3 +full:- +full:ch1 +full:- +full:supply (Results 1 – 25 of 35) sorted by relevance

12

/openbmc/linux/Documentation/devicetree/bindings/sound/
H A Dst,sta32x.txt7 - compatible: "st,sta32x"
8 - reg: the I2C address of the device for I2C
9 - reset-gpios: a GPIO spec for the reset pin. If specified, it will be
12 - power-down-gpios: a GPIO spec for the power down pin. If specified,
16 - Vdda-supply: regulator spec, providing 3.3V
17 - Vdd3-supply: regulator spec, providing 3.3V
18 - Vcc-supply: regulator spec, providing 5V - 26V
22 - clocks, clock-names: Clock specifier for XTI input clock.
24 and disabled when it is removed. The 'clock-names' must be set to 'xti'.
26 - st,output-conf: number, Selects the output configuration:
[all …]
H A Dst,sta350.txt7 - compatible: "st,sta350"
8 - reg: the I2C address of the device for I2C
9 - reset-gpios: a GPIO spec for the reset pin. If specified, it will be
12 - power-down-gpios: a GPIO spec for the power down pin. If specified,
16 - vdd-dig-supply: regulator spec, providing 3.3V
17 - vdd-pll-supply: regulator spec, providing 3.3V
18 - vcc-supply: regulator spec, providing 5V - 26V
22 - st,output-conf: number, Selects the output configuration:
23 0: 2-channel (full-bridge) power, 2-channel data-out
24 1: 2 (half-bridge). 1 (full-bridge) on-board power
[all …]
/openbmc/linux/Documentation/devicetree/bindings/iio/adc/
H A Dti,ads7924.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Hugo Villeneuve <hvilleneuve@dimonoff.com>
25 vref-supply:
27 The regulator supply for the ADC reference voltage (AVDD)
29 reset-gpios:
35 "#address-cells":
38 "#size-cells":
41 "#io-channel-cells":
[all …]
/openbmc/linux/Documentation/devicetree/bindings/net/wireless/
H A Dqcom,ath10k.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Kalle Valo <kvalo@kernel.org>
18 - qcom,ath10k # SDIO-based devices
19 - qcom,ipq4019-wifi
20 - qcom,wcn3990-wifi # SNoC-based devices
25 reg-names:
27 - const: membase
33 interrupt-names:
[all …]
/openbmc/linux/sound/soc/codecs/
H A Dsta350.c1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Codec driver for ST STA350 2.1-channel high-efficiency digital audio system
35 #include <sound/soc-dapm.h>
55 /* Power-up register defaults */
154 /* regulator power supply names */
156 "vdd-dig", /* digital supply, 3.3V */
157 "vdd-pll", /* pll supply, 3.3V */
158 "vcc" /* power amp supply, 5V - 26V */
179 static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12750, 50, 1);
180 static const DECLARE_TLV_DB_SCALE(chvol_tlv, -7950, 50, 1);
[all …]
H A Dsta32x.c1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Codec driver for ST STA32x 2.1-channel high-efficiency digital audio system
35 #include <sound/soc-dapm.h>
55 /* Power-up register defaults */
129 /* regulator power supply names */
131 "Vdda", /* analog supply, 3.3VV */
132 "Vdd3", /* digital supply, 3.3V */
133 "Vcc" /* power amp spply, 10V - 36V */
154 static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12700, 50, 1);
155 static const DECLARE_TLV_DB_SCALE(chvol_tlv, -7950, 50, 1);
[all …]
H A Dtas571x.c1 // SPDX-License-Identifier: GPL-2.0-or-later
62 return priv->chip->vol_reg_size; in tas571x_register_size()
88 for (i = size; i >= 1; --i) { in tas571x_reg_write()
99 return -EIO; in tas571x_reg_write()
116 msgs[0].addr = client->addr; in tas571x_reg_read()
121 msgs[1].addr = client->addr; in tas571x_reg_read()
126 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); in tas571x_reg_read()
130 return -EIO; in tas571x_reg_read()
143 * register write for 8- and 20-byte registers
155 return -ENOMEM; in tas571x_reg_write_multiword()
[all …]
H A Dak5558.c1 // SPDX-License-Identifier: GPL-2.0
22 #include <sound/soc-dapm.h>
78 "Sharp Roll-Off", "Slow Roll-Off",
79 "Short Delay Sharp Roll-Off", "Short Delay Slow Roll-Off",
108 SND_SOC_DAPM_ADC("ADC Ch1", NULL, AK5558_00_POWER_MANAGEMENT1, 0, 0),
111 SND_SOC_DAPM_ADC("ADC Ch4", NULL, AK5558_00_POWER_MANAGEMENT1, 3, 0),
125 SND_SOC_DAPM_ADC("ADC Ch1", NULL, AK5558_00_POWER_MANAGEMENT1, 0, 0),
132 {"ADC Ch1", NULL, "AIN1"},
133 {"SDTO", NULL, "ADC Ch1"},
158 {"ADC Ch1", NULL, "AIN1"},
[all …]
H A Dtas6424.c1 // SPDX-License-Identifier: GPL-2.0
3 * ALSA SoC Texas Instruments TAS6424 Quad-Channel Audio Amplifier
5 * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/
23 #include <sound/soc-dapm.h>
32 "dvdd", /* Digital power supply. Connect to 3.3-V supply. */
33 "vbat", /* Supply used for higher voltage analog circuits. */
34 "pvdd", /* Class-D amp output FETs supply. */
52 * DAC digital volumes. From -103.5 to 24 dB in 0.5 dB steps. Note that
53 * setting the gain below -100 dB (register value <0x7) is effectively a MUTE
56 static DECLARE_TLV_DB_SCALE(dac_tlv, -10350, 50, 0);
[all …]
/openbmc/linux/arch/arm/boot/dts/microchip/
H A Dat91-tse850-3.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
9 /dts-v1/;
10 #include <dt-bindings/pwm/pwm.h>
11 #include "at91-linea.dtsi"
14 model = "Axentia TSE-850 3.0";
19 compatible = "fixed-clock";
21 #clock-cells = <0>;
22 clock-frequency = <16000000>;
23 clock-output-names = "sck";
[all …]
/openbmc/linux/arch/arm/boot/dts/st/
H A Dstm32mp131.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
6 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/clock/stm32mp13-clks.h>
8 #include <dt-bindings/reset/stm32mp13-resets.h>
11 #address-cells = <1>;
12 #size-cells = <1>;
15 #address-cells = <1>;
16 #size-cells = <0>;
19 compatible = "arm,cortex-a7";
[all …]
H A Dstm32mp151.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
6 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/clock/stm32mp1-clks.h>
8 #include <dt-bindings/reset/stm32mp1-resets.h>
11 #address-cells = <1>;
12 #size-cells = <1>;
15 #address-cells = <1>;
16 #size-cells = <0>;
19 compatible = "arm,cortex-a7";
[all …]
/openbmc/linux/arch/arm64/boot/dts/qcom/
H A Dsdm850-samsung-w737.dts1 // SPDX-License-Identifier: BSD-3-Clause
8 /dts-v1/;
10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 #include <dt-bindings/sound/qcom,q6afe.h>
15 #include <dt-bindings/sound/qcom,q6asm.h>
17 #include "sdm845-wcd9340.dtsi"
24 /delete-node/ &qseecom_mem;
[all …]
H A Dsc8180x-primus.dts1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2020-2023, Linaro Limited
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/gpio-keys.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 #include "sc8180x-pmics.dtsi"
18 compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
[all …]
H A Dsdm845-xiaomi-beryllium-common.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 /dts-v1/;
5 #include <dt-bindings/leds/common.h>
6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
7 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
8 #include <dt-bindings/sound/qcom,q6afe.h>
9 #include <dt-bindings/sound/qcom,q6asm.h>
11 #include "sdm845-wcd9340.dtsi"
19 /delete-node/ &tz_mem;
20 /delete-node/ &adsp_mem;
[all …]
H A Dsdm850-lenovo-yoga-c630.dts1 // SPDX-License-Identifier: BSD-3-Clause
8 /dts-v1/;
10 #include <dt-bindings/input/gpio-keys.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13 #include <dt-bindings/sound/qcom,q6afe.h>
14 #include <dt-bindings/sound/qcom,q6asm.h>
16 #include "sdm845-wcd9340.dtsi"
24 /delete-node/ &ipa_fw_mem;
25 /delete-node/ &ipa_gsi_mem;
[all …]
H A Dsc8180x-lenovo-flex-5g.dts1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2020-2023, Linaro Limited
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/gpio-keys.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 #include "sc8180x-pmics.dtsi"
18 compatible = "lenovo,flex-5g", "qcom,sc8180x";
[all …]
H A Dsc7180-idp.dts1 // SPDX-License-Identifier: BSD-3-Clause
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
14 #include "sc7180-firmware-tfa.dtsi"
20 compatible = "qcom,sc7180-idp", "qcom,sc7180";
30 stdout-path = "serial0:115200n8";
42 /delete-node/ &hyp_mem;
43 /delete-node/ &xbl_mem;
[all …]
H A Dsdm845-oneplus-common.dtsi1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/input/linux-event-codes.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12 #include <dt-bindings/sound/qcom,q6afe.h>
13 #include <dt-bindings/sound/qcom,q6asm.h>
16 #include "sdm845-wcd9340.dtsi"
20 /delete-node/ &rmtfs_mem;
29 stdout-path = "serial0:115200n8";
32 gpio-hall-sensor {
[all …]
H A Dsdm845-shift-axolotl.dts1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
20 qcom,msm-id = <321 0x20001>;
21 qcom,board-id = <11 0>;
30 #address-cells = <2>;
31 #size-cells = <2>;
34 stdout-path = "serial0";
[all …]
H A Dsc7180-acer-aspire1.dts1 // SPDX-License-Identifier: BSD-3-Clause
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13 /delete-node/ &tz_mem;
14 /delete-node/ &ipa_fw_mem;
19 chassis-type = "laptop";
29 stdout-path = "serial0:115200n8";
32 reserved-memory {
33 zap_mem: zap-shader@80840000 {
[all …]
H A Dsdm845-xiaomi-polaris.dts1 // SPDX-License-Identifier: BSD-3-Clause
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12 #include <dt-bindings/input/linux-event-codes.h>
13 #include <dt-bindings/sound/qcom,q6afe.h>
14 #include <dt-bindings/sound/qcom,q6asm.h>
16 #include "sdm845-wcd9340.dtsi"
25 /delete-node/ &rmtfs_mem;
[all …]
H A Dsm7225-fairphone-fp4.dts1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
16 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
26 chassis-type = "handset";
29 qcom,msm-id = <434 0x10000>, <459 0x10000>;
[all …]
H A Dsc7180-trogdor.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/gpio-keys.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13 #include <dt-bindings/sound/sc7180-lpass.h>
16 #include "sc7180-firmware-tfa.dtsi"
22 thermal-zones {
23 charger_thermal: charger-thermal {
[all …]
/openbmc/qemu/hw/sh4/
H A Dsh7750_regs.h2 * SH-7750 memory-mapped registers
6 * Document Number ADE-602-124C, Rev. 4.0, 4/21/00, Hitachi Ltd.
8 * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia
42 * All register has 2 addresses: in 0xff000000 - 0xffffffff (P4 address) and
43 * in 0x1f000000 - 0x1fffffff (area 7 address)
55 /* Page Table Entry High register - PTEH */
64 /* Page Table Entry Low register - PTEL */
70 #define SH7750_PTEL_V 0x00000100 /* Validity (0-entry is invalid) */
73 #define SH7750_PTEL_SZ_1KB 0x00000000 /* 1-kbyte page */
74 #define SH7750_PTEL_SZ_4KB 0x00000010 /* 4-kbyte page */
[all …]

12