| /openbmc/linux/arch/arm/boot/dts/st/ |
| H A D | stm32f746.dtsi | 48 #address-cells = <1>;
49 #size-cells = <1>;
79 #address-cells = <1>;
93 timer@1 {
95 reg = <1>;
101 #address-cells = <1>;
123 #address-cells = <1>;
144 timers5: timers@40000c00 {
145 #address-cells = <1>;
167 #address-cells = <1>;
[all …]
|
| H A D | stm32h743.dtsi | 49 #address-cells = <1>;
50 #size-cells = <1>;
73 timer5: timer@40000c00 {
81 #address-cells = <1>;
108 #address-cells = <1>;
119 spi3: spi@40003c00 {
120 #address-cells = <1>;
146 uart4: serial@40004c00 {
156 #address-cells = <1>;
168 #address-cells = <1>;
[all …]
|
| H A D | stm32f429.dtsi | 53 #address-cells = <1>;
54 #size-cells = <1>;
83 romem: efuse@1fff7800 {
86 #address-cells = <1>;
87 #size-cells = <1>;
97 #address-cells = <1>;
111 timer@1 {
113 reg = <1>;
119 #address-cells = <1>;
141 #address-cells = <1>;
[all …]
|
| H A D | stm32f469.dtsi | 8 dsi: dsi@40016c00 {
13 clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | stm32f746.dtsi | 88 #address-cells = <1>;
113 #reset-cells = <1>;
123 #address-cells = <1>;
124 #size-cells = <1>;
161 gpiod: gpio@40020c00 {
201 gpioh: gpio@40021c00 {
304 sdio: sdio@40012c00 {
311 pinctrl-1 = <&sdio_pins_od>;
316 sdio2: sdio2@40011c00 {
323 pinctrl-1 = <&sdio_pins_od_b>;
[all …]
|
| H A D | stm32f429.dtsi | 86 #address-cells = <1>;
99 timer@1 {
101 reg = <1>;
115 #address-cells = <1>;
144 #address-cells = <1>;
164 timer5: timer@40000c00 {
171 timers5: timers@40000c00 {
172 #address-cells = <1>;
201 #address-cells = <1>;
225 #address-cells = <1>;
[all …]
|
| /openbmc/phosphor-logging/extensions/openpower-pels/registry/ |
| H A D | B_component_ids.json | 13 "0C00": "hostboot: hwas",
27 "1A00": "hostboot: runtime",
28 "1B00": "hostboot: kernel",
29 "1C00": "hostboot: ibscom", string
30 "1D00": "hostboot: vpd",
31 "1E00": "hostboot: secure",
32 "1F00": "hostboot: ipc",
|
| /openbmc/linux/drivers/zorro/ |
| H A D | zorro.ids | 58 0c00 A1000 [SCSI Host Adapter]
108 0c00 500XP/SupraDrive WordSync [SCSI Host Adapter]
197 0c00 A1000 [SCSI Host Adapter]
261 0400 GrandSlam PIC 1 [RAM Expansion]
290 0000 GDA-1 VRAM [Graphics Card]
291 0100 GDA-1 [Graphics Card]
320 0c00 Picasso II/II+ [Graphics Card]
370 1d00 FastATA 4000 [IDE Interface]
371 1e00 FastATA ZIV [IDE Interface]
420 0c00 Blizzard 1220/CyberStorm [Accelerator and SCSI Host Adapter]
[all …]
|
| /openbmc/linux/Documentation/networking/devlink/ |
| H A D | devlink-region.rst | 56 pci/0000:00:05.0/cr-space: size 1048576 snapshot [1 2] max 8
57 pci/0000:00:05.0/fw-health: size 64 snapshot [1 2] max 8
60 $ devlink region del pci/0000:00:05.0/cr-space snapshot 1
67 $ devlink region dump pci/0000:00:05.0/fw-health snapshot 1
69 0000000000000010 0000 0000 ffff ff04 0029 8c00 0028 8cc8
74 $ devlink region read pci/0000:00:05.0/fw-health snapshot 1 address 0 length 16
79 0000000000000010 0000 0000 ffff ff04 0029 8c00 0028 8cc8
|
| /openbmc/qemu/tests/qtest/ |
| H A D | boot-sector.c | 29 /* The first sector will be placed at RAM address 00007C00, and
30 * the BIOS transfers control to 00007C00
37 /* 7c00: move $0000,%ax */
63 [SIGNATURE_OFFSET + 1] = HIGH(0xface),
98 return 1; in boot_sector_init()
110 HIGH(SIGNATURE), SIGNATURE_ADDR + 1); in boot_sector_init()
128 return 1; in boot_sector_init()
144 #define TEST_DELAY (1 * G_USEC_PER_SEC / 10) in boot_sector_test()
145 #define TEST_CYCLES MAX((600 * G_USEC_PER_SEC / TEST_DELAY), 1) in boot_sector_test()
153 signature_high = qtest_readb(qts, SIGNATURE_ADDR + 1); in boot_sector_test()
|
| /openbmc/linux/arch/openrisc/lib/ |
| H A D | memset.S | 31 l.bf 1f
36 l.slli r15, r13, 16 // r13 = 000c, r15 = 0c00
37 l.or r13, r13, r15 // r13 = 0c0c, r15 = 0c00
41 1: l.addi r19, r3, 0 // Set r19 = src
56 l.addi r17, r17, -1 // Decrease n
60 l.addi r19, r3, 1 // src += 1
63 l.sb 1(r3), r13 // *(src+1) = c
64 l.addi r17, r17, -1 // Decrease n
72 l.addi r17, r17, -1 // Decrease n
87 3: l.addi r17, r17, -1 // Decrease n
[all …]
|
| /openbmc/linux/drivers/iio/pressure/ |
| H A D | dps310.c | 44 #define DPS310_TEMP_EN BIT(1)
89 s32 c00, c10, c20, c30, c01, c11, c21; member
116 u32 c00, c10, c20, c30, c01, c11, c21; in dps310_get_coefs() local
128 c0 = (coef[0] << 4) | (coef[1] >> 4); in dps310_get_coefs()
131 c1 = ((coef[1] & GENMASK(3, 0)) << 8) | coef[2]; in dps310_get_coefs()
135 * Calculate pressure calibration coefficients. c00 and c10 are 20 bit in dps310_get_coefs()
139 c00 = (coef[3] << 12) | (coef[4] << 4) | (coef[5] >> 4); in dps310_get_coefs()
140 data->c00 = sign_extend32(c00, 19); in dps310_get_coefs()
178 * If bit 1 is set then the device is okay, and the workaround does not in dps310_temp_workaround()
181 if (reg & BIT(1)) in dps310_temp_workaround()
[all …]
|
| /openbmc/linux/arch/powerpc/boot/dts/ |
| H A D | lite5200b.dts | 22 gpios = <&gpt2 0 1>;
25 gpios = <&gpt3 0 1>;
28 led1 { gpios = <&gpio_wkup 2 1>; };
29 led2 { gpios = <&gpio_simple 3 1>; };
30 led3 { gpios = <&gpio_wkup 3 1>; };
31 led4 { gpios = <&gpio_simple 2 1>; };
60 psc@2c00 { // PSC6
67 // cell-index = <1>;
77 //spi@2c00 { // PSC6
107 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
[all …]
|
| H A D | mpc5200b.dtsi | 15 #address-cells = <1>;
16 #size-cells = <1>;
20 #address-cells = <1>;
42 #address-cells = <1>;
43 #size-cells = <1>;
67 interrupts = <1 9 0>;
75 interrupts = <1 10 0>;
82 interrupts = <1 11 0>;
89 interrupts = <1 12 0>;
96 interrupts = <1 13 0>;
[all …]
|
| /openbmc/linux/Documentation/driver-api/ |
| H A D | nvmem.rst | 12 1. Introduction
91 nvmem_add_cell_lookups(&foo_nvmem_lookup, 1);
178 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
|
| /openbmc/u-boot/board/freescale/t4qds/ |
| H A D | t4_nand_rcw.cfg | 3 #serdes protocol 1_27_5_11
5 04362858 30548c00 e8020000 f5000000
|
| H A D | t4_sd_rcw.cfg | 3 #serdes protocol 1_27_5_11
5 04362858 30548c00 68020000 f5000000
|
| /openbmc/u-boot/board/varisys/cyrus/ |
| H A D | rcw_p5020_v2.cfg | 8 0c540000 00000000 1e1e0000 00000000
9 44808c00 ff002000 68000000 45000000
|
| /openbmc/linux/Documentation/devicetree/bindings/fsi/ |
| H A D | fsi.txt | 71 required. For an example, a slave on link 1, with ID 2, could be represented
74 cfam@1,2 {
75 reg = <1 2>;
83 #address-cells = <1>;
84 #size-cells = <1>;
101 engine@c00 {
130 #address-cells = <1>;
131 #size-cells = <1>;
138 i2c-controller@c00 {
145 #address-cells = <1>;
[all …]
|
| H A D | ibm,fsi2spi.yaml | 35 fsi2spi@1c00 {
|
| /openbmc/linux/Documentation/devicetree/bindings/reset/ |
| H A D | bitmain,bm1880-reset.yaml | 18 maxItems: 1
21 const: 1
32 rst: reset-controller@c00 {
35 #reset-cells = <1>;
|
| /openbmc/linux/Documentation/devicetree/bindings/timer/ |
| H A D | st,stm32-timer.yaml | 18 maxItems: 1
21 maxItems: 1
24 maxItems: 1
27 maxItems: 1
41 timer: timer@40000c00 {
|
| /openbmc/linux/arch/mips/boot/dts/ralink/ |
| H A D | mt7620a.dtsi | 3 #address-cells = <1>;
4 #size-cells = <1>;
15 #interrupt-cells = <1>;
25 #address-cells = <1>;
26 #size-cells = <1>;
38 #interrupt-cells = <1>;
49 uartlite@c00 {
|
| H A D | rt2880.dtsi | 3 #address-cells = <1>;
4 #size-cells = <1>;
15 #interrupt-cells = <1>;
25 #address-cells = <1>;
26 #size-cells = <1>;
38 #interrupt-cells = <1>;
49 uartlite@c00 {
|
| /openbmc/linux/Documentation/devicetree/bindings/media/cec/ |
| H A D | st,stm32-cec.yaml | 17 maxItems: 1
20 maxItems: 1
45 cec: cec@40006c00 {
|