/openbmc/linux/Documentation/devicetree/bindings/usb/ |
H A D | usb-drd.yaml | 19 0x0200 or above. 21 enum: [0x0100, 0x0120, 0x0130, 0x0200] 71 reg = <0x4a030000 0xcfff>; 72 interrupts = <0 92 4>; 77 otg-rev = <0x0200>;
|
H A D | snps,dwc3.yaml | 188 - 0 # -6dB de-emphasis 264 quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end 299 minimum: 0 300 maximum: 0x3f 393 port@0: 417 reg = <0x4a030000 0xcfff>; 418 interrupts = <0 92 4>; 425 reg = <0x4a000000 0xcfff>; 426 interrupts = <0 92 4>;
|
/openbmc/linux/arch/mips/alchemy/common/ |
H A D | sleeper.S | 46 sw k0, 0x20(sp) 48 sw k0, 0x1c(sp) 50 sw k0, 0x18(sp) 52 sw k0, 0x14(sp) 56 lw t0, 0(t1) 65 lui t3, 0xb190 /* sys_xxx */ 66 sw sp, 0x0018(t3) 68 sw k0, 0x001c(t3) 73 sw zero, 0x0078(t3) /* sys_slppwr */ 75 sw zero, 0x007c(t3) /* sys_sleep */ [all …]
|
/openbmc/linux/drivers/gpu/drm/i915/ |
H A D | intel_uncore.c | 66 uncore->debug->unclaimed_mmio_check = 0; in mmio_debug_suspend() 115 if (id >= 0 && id < FW_DOMAIN_ID_COUNT) in intel_uncore_forcewake_domain_to_str() 137 fw_clear(d, 0xefff); in fw_domain_reset() 139 fw_clear(d, 0xffff); in fw_domain_reset() 167 return __wait_for_ack(d, ack, 0); in wait_ack_clear() 183 if (fw_ack(d) == ~0) in fw_domain_wait_ack_clear() 185 "%s: MMIO unreliable (forcewake register returns 0xFFFFFFFF)!\n", in fw_domain_wait_ack_clear() 196 ACK_CLEAR = 0, 205 const u32 value = type == ACK_SET ? ack_bit : 0; in fw_domain_wait_ack_with_fallback() 238 "%s had to use fallback to %s ack, 0x%x (passes %u)\n", in fw_domain_wait_ack_with_fallback() [all …]
|
/openbmc/linux/sound/soc/codecs/ |
H A D | rt1308-sdw.c | 31 case 0x00e0: in rt1308_readable_register() 32 case 0x00f0: in rt1308_readable_register() 33 case 0x2f01 ... 0x2f07: in rt1308_readable_register() 34 case 0x3000 ... 0x3001: in rt1308_readable_register() 35 case 0x3004 ... 0x3005: in rt1308_readable_register() 36 case 0x3008: in rt1308_readable_register() 37 case 0x300a: in rt1308_readable_register() 38 case 0xc000 ... 0xcff3: in rt1308_readable_register() 48 case 0x2f01 ... 0x2f07: in rt1308_volatile_register() 49 case 0x3000 ... 0x3001: in rt1308_volatile_register() [all …]
|
/openbmc/u-boot/arch/m68k/cpu/mcf52x2/ |
H A D | cpu_init.c | 43 #warning "Chip Select 0 are not initialized/used" in init_fbcs() 99 out_be16(&wdg->cr, 0); in cpu_init_f() 102 out_be32(&scm1->mpr, 0x77777777); in cpu_init_f() 103 out_be32(&scm1->pacra, 0); in cpu_init_f() 104 out_be32(&scm1->pacrb, 0); in cpu_init_f() 105 out_be32(&scm1->pacrc, 0); in cpu_init_f() 106 out_be32(&scm1->pacrd, 0); in cpu_init_f() 107 out_be32(&scm1->pacre, 0); in cpu_init_f() 108 out_be32(&scm1->pacrf, 0); in cpu_init_f() 119 return (0); in cpu_init_r() [all …]
|
/openbmc/linux/sound/isa/sb/ |
H A D | emu8000.c | 99 unsigned right_bit = (mode & EMU8000_RAM_RIGHT) ? 0x01000000 : 0; in snd_emu8000_dma_chan() 102 EMU8000_CCCA_WRITE(emu, ch, 0); in snd_emu8000_dma_chan() 103 EMU8000_DCYSUSV_WRITE(emu, ch, 0x807F); in snd_emu8000_dma_chan() 106 EMU8000_DCYSUSV_WRITE(emu, ch, 0x80); in snd_emu8000_dma_chan() 107 EMU8000_VTFT_WRITE(emu, ch, 0); in snd_emu8000_dma_chan() 108 EMU8000_CVCF_WRITE(emu, ch, 0); in snd_emu8000_dma_chan() 109 EMU8000_PTRX_WRITE(emu, ch, 0x40000000); in snd_emu8000_dma_chan() 110 EMU8000_CPF_WRITE(emu, ch, 0x40000000); in snd_emu8000_dma_chan() 111 EMU8000_PSST_WRITE(emu, ch, 0); in snd_emu8000_dma_chan() 112 EMU8000_CSL_WRITE(emu, ch, 0); in snd_emu8000_dma_chan() [all …]
|
/openbmc/u-boot/arch/m68k/include/asm/ |
H A D | m5227x.h | 13 #define INT0_LO_RSVD0 (0) 87 #define RCM_RCR_FRCRSTOUT (0x40) 88 #define RCM_RCR_SOFTRST (0x80) 91 #define RCM_RSR_LOL (0x01) 92 #define RCM_RSR_WDR_CORE (0x02) 93 #define RCM_RSR_EXT (0x04) 94 #define RCM_RSR_POR (0x08) 95 #define RCM_RSR_SOFT (0x20) 102 #define CCM_CCR_DRAMSEL (0x0100) 103 #define CCM_CCR_CSC_UNMASK (0xFF3F) [all …]
|
/openbmc/linux/drivers/media/dvb-frontends/ |
H A D | s5h1411.c | 42 } while (0) 50 { S5H1411_I2C_TOP_ADDR, 0x00, 0x0071, }, 51 { S5H1411_I2C_TOP_ADDR, 0x08, 0x0047, }, 52 { S5H1411_I2C_TOP_ADDR, 0x1c, 0x0400, }, 53 { S5H1411_I2C_TOP_ADDR, 0x1e, 0x0370, }, 54 { S5H1411_I2C_TOP_ADDR, 0x1f, 0x342c, }, 55 { S5H1411_I2C_TOP_ADDR, 0x24, 0x0231, }, 56 { S5H1411_I2C_TOP_ADDR, 0x25, 0x1011, }, 57 { S5H1411_I2C_TOP_ADDR, 0x26, 0x0f07, }, 58 { S5H1411_I2C_TOP_ADDR, 0x27, 0x0f04, }, [all …]
|
H A D | s5h1409.c | 37 #define QAM_STATE_UNTUNED 0 57 { 0x00, 0x0071, }, 58 { 0x01, 0x3213, }, 59 { 0x09, 0x0025, }, 60 { 0x1c, 0x001d, }, 61 { 0x1f, 0x002d, }, 62 { 0x20, 0x001d, }, 63 { 0x22, 0x0022, }, 64 { 0x23, 0x0020, }, 65 { 0x29, 0x110f, }, [all …]
|
/openbmc/linux/drivers/net/wireless/broadcom/b43legacy/ |
H A D | radio.c | 30 0x0002, 0x0003, 0x0001, 0x000F, 31 0x0006, 0x0007, 0x0005, 0x000F, 32 0x000A, 0x000B, 0x0009, 0x000F, 33 0x000E, 0x000F, 0x000D, 0x000F, 41 u16 flipped = 0x0000; in flip_4bit() 43 B43legacy_BUG_ON(!((value & ~0x000F) == 0x0000)); in flip_4bit() 45 flipped |= (value & 0x0001) << 3; in flip_4bit() 46 flipped |= (value & 0x0002) << 1; in flip_4bit() 47 flipped |= (value & 0x0004) >> 1; in flip_4bit() 48 flipped |= (value & 0x0008) >> 3; in flip_4bit() [all …]
|
H A D | phy.c | 33 0x4D, 0x4C, 0x4B, 0x4A, 34 0x4A, 0x49, 0x48, 0x47, 35 0x47, 0x46, 0x45, 0x45, 36 0x44, 0x43, 0x42, 0x42, 37 0x41, 0x40, 0x3F, 0x3E, 38 0x3D, 0x3C, 0x3B, 0x3A, 39 0x39, 0x38, 0x37, 0x36, 40 0x35, 0x34, 0x32, 0x31, 41 0x30, 0x2F, 0x2D, 0x2C, 42 0x2B, 0x29, 0x28, 0x26, [all …]
|
/openbmc/linux/drivers/net/wireless/broadcom/b43/ |
H A D | phy_g.c | 75 {.att = 3,.with_padmix = 0,}, in generate_rfatt_list() 76 {.att = 1,.with_padmix = 0,}, in generate_rfatt_list() 77 {.att = 5,.with_padmix = 0,}, in generate_rfatt_list() 78 {.att = 7,.with_padmix = 0,}, in generate_rfatt_list() 79 {.att = 9,.with_padmix = 0,}, in generate_rfatt_list() 80 {.att = 2,.with_padmix = 0,}, in generate_rfatt_list() 81 {.att = 0,.with_padmix = 0,}, in generate_rfatt_list() 82 {.att = 4,.with_padmix = 0,}, in generate_rfatt_list() 83 {.att = 6,.with_padmix = 0,}, in generate_rfatt_list() 84 {.att = 8,.with_padmix = 0,}, in generate_rfatt_list() [all …]
|
/openbmc/linux/drivers/video/fbdev/ |
H A D | sa1100fb.c | 111 * totally random colour depending on what was in page 0, and (b) 196 .red = { .offset = 0, .length = 4, }, 197 .green = { .offset = 0, .length = 4, }, 198 .blue = { .offset = 0, .length = 4, }, 199 .transp = { .offset = 0, .length = 0, }, 203 .red = { .offset = 0, .length = 8, }, 204 .green = { .offset = 0, .length = 8, }, 205 .blue = { .offset = 0, .length = 8, }, 206 .transp = { .offset = 0, .length = 0, }, 212 .blue = { .offset = 0, .length = 5, }, [all …]
|
/openbmc/linux/drivers/gpu/drm/i915/gt/ |
H A D | intel_workarounds.c | 131 enum forcewake_domains fw = 0; in wal_get_fw_for_rmw() 135 for (i = 0, wa = wal->list; i < wal->count; i++, wa++) in wal_get_fw_for_rmw() 148 unsigned int start = 0, end = wal->count; in _wa_add() 204 GEM_BUG_ON(i915_mmio_reg_offset(wa_[0].reg) == in _wa_add() 207 i915_mmio_reg_offset(wa_[0].reg)) in _wa_add() 210 swap(wa_[1], wa_[0]); in _wa_add() 258 wa_write_clr_set(wal, reg, ~0, set); in wa_write() 264 wa_mcr_write_clr_set(wal, reg, ~0, set); in wa_mcr_write() 282 wa_write_clr_set(wal, reg, clr, 0); in wa_write_clr() 288 wa_mcr_write_clr_set(wal, reg, clr, 0); in wa_mcr_write_clr() [all …]
|
/openbmc/linux/sound/pci/ac97/ |
H A D | ac97_codec.c | 39 "(in second, 0 = disable)."); 55 { 0x41445300, 0xffffff00, "Analog Devices", NULL, NULL }, 56 { 0x414b4d00, 0xffffff00, "Asahi Kasei", NULL, NULL }, 57 { 0x414c4300, 0xffffff00, "Realtek", NULL, NULL }, 58 { 0x414c4700, 0xffffff00, "Realtek", NULL, NULL }, 64 { 0x415a5400, 0xffffff00, "Aztech Labs (emulated)", NULL, NULL }, 65 { 0x434d4900, 0xffffff00, "C-Media Electronics", NULL, NULL }, 66 { 0x43525900, 0xffffff00, "Cirrus Logic", NULL, NULL }, 67 { 0x43585400, 0xffffff00, "Conexant", NULL, NULL }, 68 { 0x44543000, 0xffffff00, "Diamond Technology", NULL, NULL }, [all …]
|
/openbmc/linux/Documentation/admin-guide/ |
H A D | kernel-parameters.txt | 21 1,0: use 1st APIC table 22 default: 0 62 acpi.debug_layer=0x20000000 65 acpi.debug_layer=0xffffffff acpi.debug_level=0x2 67 acpi.debug_layer=0x2 acpi.debug_level=0xffffffff 276 behaviour to be specified. Bit 0 enables warnings, 356 to bias toward performance (0x0) or energy efficiency (0xf [all...] |
/openbmc/linux/drivers/net/usb/ |
H A D | r8152.c | 45 #define PLA_IDR 0xc000 46 #define PLA_RCR 0xc010 47 #define PLA_RCR1 0xc012 48 #define PLA_RMS 0xc016 49 #define PLA_RXFIFO_CTRL0 0xc0a0 50 #define PLA_RXFIFO_FULL 0xc0a2 51 #define PLA_RXFIFO_CTRL1 0xc0a4 52 #define PLA_RX_FIFO_FULL 0xc0a6 53 #define PLA_RXFIFO_CTRL2 0xc0a8 54 #define PLA_RX_FIFO_EMPTY 0xc0aa [all …]
|
/openbmc/linux/drivers/accel/habanalabs/gaudi2/ |
H A D | gaudi2.c | 54 #define GAUDI2_TPC_FULL_MASK 0x1FFFFFF 55 #define GAUDI2_HIF_HMMU_FULL_MASK 0xFFFF 56 #define GAUDI2_DECODER_FULL_MASK 0x3FF 58 #define GAUDI2_NA_EVENT_CAUSE 0xFF 83 #define GAUDI2_ARB_WDT_TIMEOUT (0x1000000) 105 #define PCIE_DEC_EN_MASK 0x300 106 #define DEC_WORK_STATE_IDLE 0 115 #define GAUDI2_HBM_MMU_SCRM_MOD_SHIFT 0 120 #define MMU_RANGE_INV_EN_SHIFT 0 127 #define GAUDI2_PMMU_SPI_SEI_ENABLE_MASK GENMASK(GAUDI2_NUM_OF_MMU_SPI_SEI_CAUSE - 2, 0) [all …]
|
/openbmc/linux/fs/nls/ |
H A D | nls_cp949.c | 17 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x00-0x07 */ 18 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x08-0x0F */ 19 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x10-0x17 */ 20 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x18-0x1F */ 21 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x20-0x27 */ 22 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x28-0x2F */ 23 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x30-0x37 */ 24 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x38-0x3F */ 25 0x0000,0xAC02,0xAC03,0xAC05,0xAC06,0xAC0B,0xAC0C,0xAC0D,/* 0x40-0x47 */ 26 0xAC0E,0xAC0F,0xAC18,0xAC1E,0xAC1F,0xAC21,0xAC22,0xAC23,/* 0x48-0x4F */ [all …]
|