/openbmc/linux/drivers/media/usb/gspca/ |
H A D | dtcs033.c | 32 if (gspca_dev->usb_err < 0) in reg_rw() 36 usb_rcvctrlpipe(udev, 0), in reg_rw() 42 if (ret < 0) { in reg_rw() 53 int i = 0; in reg_reqs() 56 while ((i < n_reqs) && (gspca_dev->usb_err >= 0)) { in reg_reqs() 63 if (gspca_dev->usb_err < 0) { in reg_reqs() 111 return 0; in sd_config() 117 return 0; in sd_init() 137 gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); in dtcs033_pkt_scan() 141 gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); in dtcs033_pkt_scan() [all …]
|
/openbmc/linux/drivers/net/wireless/mediatek/mt76/mt76x0/ |
H A D | initvals_phy.h | 12 { MT_RF(0, 1), 0x01 }, 13 { MT_RF(0, 2), 0x11 }, 15 { MT_RF(0, 3), 0x73 }, /* VCO Freq Cal */ 16 { MT_RF(0, 4), 0x30 }, /* R4 b<7>=1, VCO cal */ 17 { MT_RF(0, 5), 0x00 }, 18 { MT_RF(0, 6), 0x41 }, 19 { MT_RF(0, 7), 0x00 }, 20 { MT_RF(0, 8), 0x00 }, 21 { MT_RF(0, 9), 0x00 }, 22 { MT_RF(0, 10), 0x0C }, [all …]
|
/openbmc/openbmc/meta-hpe/meta-dl360-g11/recipes-hpe/power-sequencing/files/ |
H A D | gpios-manager.sh | 6 devmem 0x80fc0230 8 0x1 8 devmem 0x80fc0230 8 0x1 11 devmem 0xd1000087 8 1 12 i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8 13 devmem 0xd1000087 8 2 14 i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8 15 devmem 0xd1000087 8 3 16 i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8 17 devmem 0xd1000087 8 4 18 i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8 [all …]
|
/openbmc/linux/drivers/media/usb/gspca/gl860/ |
H A D | gl860-mi1320.c | 11 {0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xba51, 0x0066}, {0xba02, 0x00f1}, 12 {0xba05, 0x0067}, {0xba05, 0x00f1}, {0xbaa0, 0x0065}, {0xba00, 0x00f1}, 13 {0xffff, 0xffff}, 14 {0xba00, 0x00f0}, {0xba02, 0x00f1}, {0xbafa, 0x0028}, {0xba02, 0x00f1}, 15 {0xba00, 0x00f0}, {0xba01, 0x00f1}, {0xbaf0, 0x0006}, {0xba0e, 0x00f1}, 16 {0xba70, 0x0006}, {0xba0e, 0x00f1}, 17 {0xffff, 0xffff}, 18 {0xba74, 0x0006}, {0xba0e, 0x00f1}, 19 {0xffff, 0xffff}, 20 {0x0061, 0x0000}, {0x0068, 0x000d}, [all …]
|
H A D | gl860-ov2640.c | 12 static u8 c61[] = {0x61}; /* expected */ 13 static u8 c51[] = {0x51}; /* expected */ 14 static u8 c50[] = {0x50}; /* expected */ 15 static u8 c28[] = {0x28}; /* expected */ 16 static u8 ca8[] = {0xa8}; /* expected */ 27 {0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1}, 28 {0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d}, 29 {0x0050, 0x0000}, {0x0041, 0x0000}, {0x006a, 0x0007}, {0x0061, 0x0006}, 30 {0x006a, 0x000d}, {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, 31 {0x0041, 0x00c2}, {0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, [all …]
|
/openbmc/linux/drivers/net/ethernet/intel/ixgbevf/ |
H A D | regs.h | 7 #define IXGBE_VFCTRL 0x00000 8 #define IXGBE_VFSTATUS 0x00008 9 #define IXGBE_VFLINKS 0x00010 10 #define IXGBE_VFFRTIMER 0x00048 11 #define IXGBE_VFRXMEMWRAP 0x03190 12 #define IXGBE_VTEICR 0x00100 13 #define IXGBE_VTEICS 0x00104 14 #define IXGBE_VTEIMS 0x00108 15 #define IXGBE_VTEIMC 0x0010C 16 #define IXGBE_VTEIAC 0x00110 [all …]
|
/openbmc/linux/drivers/scsi/aic7xxx/ |
H A D | aic7xxx_reg_print.c_shipped | 12 { "SCSIRSTO", 0x01, 0x01 }, 13 { "ENAUTOATNP", 0x02, 0x02 }, 14 { "ENAUTOATNI", 0x04, 0x04 }, 15 { "ENAUTOATNO", 0x08, 0x08 }, 16 { "ENRSELI", 0x10, 0x10 }, 17 { "ENSELI", 0x20, 0x20 }, 18 { "ENSELO", 0x40, 0x40 }, 19 { "TEMODE", 0x80, 0x80 } 26 0x00, regvalue, cur_col, wrap)); 30 { "CLRCHN", 0x02, 0x02 }, [all …]
|
H A D | aic79xx_reg_print.c_shipped | 12 { "SPLTINT", 0x01, 0x01 }, 13 { "CMDCMPLT", 0x02, 0x02 }, 14 { "SEQINT", 0x04, 0x04 }, 15 { "SCSIINT", 0x08, 0x08 }, 16 { "PCIINT", 0x10, 0x10 }, 17 { "SWTMINT", 0x20, 0x20 }, 18 { "BRKADRINT", 0x40, 0x40 }, 19 { "HWERRINT", 0x80, 0x80 }, 20 { "INT_PEND", 0xff, 0xff } 27 0x01, regvalue, cur_col, wrap)); [all …]
|
H A D | aic7xxx_reg.h_shipped | 19 ahc_print_register(NULL, 0, "SCSISEQ", 0x00, regvalue, cur_col, wrap) 26 ahc_print_register(NULL, 0, "SXFRCTL0", 0x01, regvalue, cur_col, wrap) 33 ahc_print_register(NULL, 0, "SCSISIGI", 0x03, regvalue, cur_col, wrap) 40 ahc_print_register(NULL, 0, "SCSIRATE", 0x04, regvalue, cur_col, wrap) 47 ahc_print_register(NULL, 0, "SSTAT0", 0x0b, regvalue, cur_col, wrap) 54 ahc_print_register(NULL, 0, "SSTAT1", 0x0c, regvalue, cur_col, wrap) 61 ahc_print_register(NULL, 0, "SSTAT2", 0x0d, regvalue, cur_col, wrap) 68 ahc_print_register(NULL, 0, "SSTAT3", 0x0e, regvalue, cur_col, wrap) 75 ahc_print_register(NULL, 0, "SIMODE0", 0x10, regvalue, cur_col, wrap) 82 ahc_print_register(NULL, 0, "SIMODE1", 0x11, regvalue, cur_col, wrap) [all …]
|
H A D | aic79xx_reg.h_shipped | 19 ahd_print_register(NULL, 0, "INTSTAT", 0x01, regvalue, cur_col, wrap) 26 ahd_print_register(NULL, 0, "HS_MAILBOX", 0x0b, regvalue, cur_col, wrap) 33 ahd_print_register(NULL, 0, "SEQINTSTAT", 0x0c, regvalue, cur_col, wrap) 40 ahd_print_register(NULL, 0, "INTCTL", 0x18, regvalue, cur_col, wrap) 47 ahd_print_register(NULL, 0, "DFCNTRL", 0x19, regvalue, cur_col, wrap) 54 ahd_print_register(NULL, 0, "DFSTATUS", 0x1a, regvalue, cur_col, wrap) 61 ahd_print_register(NULL, 0, "SG_CACHE_SHADOW", 0x1b, regvalue, cur_col, wrap) 68 ahd_print_register(NULL, 0, "SCSISEQ0", 0x3a, regvalue, cur_col, wrap) 75 ahd_print_register(NULL, 0, "SCSISEQ1", 0x3b, regvalue, cur_col, wrap) 82 ahd_print_register(NULL, 0, "DFFSTAT", 0x3f, regvalue, cur_col, wrap) [all …]
|
/openbmc/linux/drivers/gpu/drm/panel/ |
H A D | panel-novatek-nt36672a.c | 91 for (i = 0; i < num; i++) { in nt36672a_send_cmds() 94 err = mipi_dsi_dcs_write(pinfo->link, cmd->data[0], cmd->data + 1, 1); in nt36672a_send_cmds() 96 if (err < 0) in nt36672a_send_cmds() 100 return 0; in nt36672a_send_cmds() 106 int ret = 0; in nt36672a_panel_power_off() 123 return 0; in nt36672a_panel_unprepare() 129 if (ret < 0) in nt36672a_panel_unprepare() 133 if (ret < 0) in nt36672a_panel_unprepare() 140 if (ret < 0) in nt36672a_panel_unprepare() 143 /* 0x3C = 60ms delay */ in nt36672a_panel_unprepare() [all …]
|
/openbmc/u-boot/arch/arm/mach-at91/include/mach/ |
H A D | gpio.h | 18 #define PIN_BASE 0 24 #define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) 25 #define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) 26 #define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) 27 #define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) 28 #define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) 29 #define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) 30 #define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) 31 #define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) 32 #define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) [all …]
|
/openbmc/linux/drivers/net/ethernet/microchip/ |
H A D | enc28j60_hw.h | 15 * - Register address (bits 0-4) 19 #define ADDR_MASK 0x1F 20 #define BANK_MASK 0x60 21 #define SPRD_MASK 0x80 23 #define EIE 0x1B 24 #define EIR 0x1C 25 #define ESTAT 0x1D 26 #define ECON2 0x1E 27 #define ECON1 0x1F 28 /* Bank 0 registers */ [all …]
|
/openbmc/linux/include/linux/ |
H A D | termios_internal.h | 9 eof=^D vtime=\0 vmin=\1 sxtc=\0 10 start=^Q stop=^S susp=^Z eol=\0 12 eol2=\0 16 #define INIT_C_CC_VDSUSP_EXTRA [VDSUSP] = 'Y'-0x40, 22 [VINTR] = 'C'-0x40, \ 23 [VQUIT] = '\\'-0x40, \ 25 [VKILL] = 'U'-0x40, \ 26 [VEOF] = 'D'-0x40, \ 27 [VSTART] = 'Q'-0x40, \ 28 [VSTOP] = 'S'-0x40, \ [all …]
|
/openbmc/linux/include/linux/mfd/da9052/ |
H A D | reg.h | 14 #define DA9052_PAGE0_CON_REG 0 176 #define DA9052_PAGE_CONF 0X80 179 #define DA9052_STATUSA_VDATDET 0X80 180 #define DA9052_STATUSA_VBUSSEL 0X40 181 #define DA9052_STATUSA_DCINSEL 0X20 182 #define DA9052_STATUSA_VBUSDET 0X10 183 #define DA9052_STATUSA_DCINDET 0X08 184 #define DA9052_STATUSA_IDGND 0X04 185 #define DA9052_STATUSA_IDFLOAT 0X02 186 #define DA9052_STATUSA_NONKEY 0X01 [all …]
|
/openbmc/linux/drivers/isdn/hardware/mISDN/ |
H A D | hfc_multi.h | 6 #define DEBUG_HFCMULTI_FIFO 0x00010000 7 #define DEBUG_HFCMULTI_CRC 0x00020000 8 #define DEBUG_HFCMULTI_INIT 0x00040000 9 #define DEBUG_HFCMULTI_PLXSD 0x00080000 10 #define DEBUG_HFCMULTI_MODE 0x00100000 11 #define DEBUG_HFCMULTI_MSG 0x00200000 12 #define DEBUG_HFCMULTI_STATE 0x00400000 13 #define DEBUG_HFCMULTI_FILL 0x00800000 14 #define DEBUG_HFCMULTI_SYNC 0x01000000 15 #define DEBUG_HFCMULTI_DTMF 0x02000000 [all …]
|
/openbmc/linux/arch/sparc/lib/ |
H A D | copy_page.S | 31 #define PAGE_SIZE_REM 0x80 33 #define PAGE_SIZE_REM 0x100 88 wrpr %o2, 0x0, %pstate 99 prefetch [%o1 + 0x000], #one_read 101 prefetch [%o1 + 0x040], #one_read 102 prefetch [%o1 + 0x080], #one_read 103 prefetch [%o1 + 0x0c0], #one_read 104 ldd [%o1 + 0x000], %f0 105 prefetch [%o1 + 0x100], #one_read 106 ldd [%o1 + 0x008], %f2 [all …]
|
/openbmc/linux/include/linux/mlx5/ |
H A D | mlx5_ifc_vdpa.h | 8 MLX5_VIRTIO_Q_EVENT_MODE_NO_MSIX_MODE = 0x0, 9 MLX5_VIRTIO_Q_EVENT_MODE_QP_MODE = 0x1, 10 MLX5_VIRTIO_Q_EVENT_MODE_MSIX_MODE = 0x2, 14 MLX5_VIRTIO_EMULATION_VIRTIO_QUEUE_TYPE_SPLIT = 0, 26 u8 virtio_q_type[0x8]; 27 u8 reserved_at_8[0x5]; 28 u8 event_mode[0x3]; 29 u8 queue_index[0x10]; 31 u8 full_emulation[0x1]; 32 u8 virtio_version_1_0[0x1]; [all …]
|
H A D | mlx5_ifc_fpga.h | 36 u8 max_num_qps[0x10]; 37 u8 reserved_at_10[0x8]; 38 u8 total_rcv_credits[0x8]; 40 u8 reserved_at_20[0xe]; 41 u8 qp_type[0x2]; 42 u8 reserved_at_30[0x5]; 43 u8 rae[0x1]; 44 u8 rwe[0x1]; 45 u8 rre[0x1]; 46 u8 reserved_at_38[0x4]; [all …]
|
/openbmc/linux/drivers/video/fbdev/i810/ |
H A D | i810_dvt.c | 21 { 25000, 0x0013, 0x0003, 0x40, 0x5F, 0x4F, 0x50, 0x82, 0x51, 0x9D, 22 0x0B, 0x10, 0x40, 0xE9, 0x0B, 0xDF, 0x50, 0xE7, 0x04, 0x02, 23 0x01, 0x01, 0x01, 0x00, 0x01, 0x22002000, 0x22004000, 0x22006000, 24 0x22002000, 0x22004000, 0x22006000, 0xC0 }, 27 { 28000, 0x0053, 0x0010, 0x40, 0x61, 0x4F, 0x4F, 0x85, 0x52, 0x9A, 28 0xF2, 0x10, 0x40, 0xE0, 0x03, 0xDF, 0x50, 0xDF, 0xF3, 0x01, 29 0x01, 0x01, 0x01, 0x00, 0x01, 0x22002000, 0x22004000, 0x22005000, 30 0x22002000, 0x22004000, 0x22005000, 0xC0 }, 33 { 31000, 0x0013, 0x0002, 0x40, 0x63, 0x4F, 0x4F, 0x87, 0x52, 0x97, 34 0x06, 0x0F, 0x40, 0xE8, 0x0B, 0xDF, 0x50, 0xDF, 0x07, 0x02, [all …]
|
/openbmc/openbmc/meta-hpe/meta-rl300-g11/recipes-hpe/power-sequencing/files/ |
H A D | gpios-manager.sh | 13 …is reported through an interrupt that we can poll at 2e within the CPLD address space (0xd100_00e2) 16 success=0 17 while [ "$max_retry" != "0" ] 19 waitForSoC=$(devmem 0xd10000e2 8) 20 isAvailable=$(( waitForSoC & 0x2 )) 23 max_retry=0 33 devmem 0xd1000087 8 5 34 i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8 35 i2ctransfer -y 3 w2@0x40 0x34 0xa7 r1 37 devmem 0xd1000087 8 7 [all …]
|
/openbmc/linux/tools/perf/pmu-events/arch/x86/bonnell/ |
H A D | other.json | 4 "EventCode": "0x7D", 7 "UMask": "0x40" 11 "EventCode": "0x61", 14 "UMask": "0x20" 18 "EventCode": "0x61", 24 "EventCode": "0x64", 27 "UMask": "0x40" 31 "EventCode": "0x62", 34 "UMask": "0x20" 38 "EventCode": "0x62", [all …]
|
/openbmc/linux/include/linux/mfd/da9063/ |
H A D | registers.h | 18 /* Page 0 : I2C access 0x000 - 0x0FF SPI access 0x000 - 0x07F */ 19 /* Page 1 : SPI access 0x080 - 0x0FF */ 20 /* Page 2 : I2C access 0x100 - 0x1FF SPI access 0x100 - 0x17F */ 21 /* Page 3 : SPI access 0x180 - 0x1FF */ 22 #define DA9063_REG_PAGE_CON 0x00 25 #define DA9063_REG_STATUS_A 0x01 26 #define DA9063_REG_STATUS_B 0x02 27 #define DA9063_REG_STATUS_C 0x03 28 #define DA9063_REG_STATUS_D 0x04 29 #define DA9063_REG_FAULT_LOG 0x05 [all …]
|
/openbmc/linux/drivers/net/ethernet/intel/igbvf/ |
H A D | regs.h | 7 #define E1000_CTRL 0x00000 /* Device Control - RW */ 8 #define E1000_STATUS 0x00008 /* Device Status - RO */ 9 #define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ 10 #define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ 11 #define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) 12 #define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ 13 #define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ 14 #define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ 15 #define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ 16 #define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ [all …]
|
/openbmc/linux/sound/soc/intel/keembay/ |
H A D | kmb_platform.h | 19 #define IER 0x000 20 #define IRER 0x004 21 #define ITER 0x008 22 #define CER 0x00C 23 #define CCR 0x010 24 #define RXFFR 0x014 25 #define TXFFR 0x018 31 #define ISR_RXDA BIT(0) 34 #define LRBR_LTHR(x) (0x40 * (x) + 0x020) 35 #define RRBR_RTHR(x) (0x40 * (x) + 0x024) [all …]
|