/openbmc/linux/Documentation/devicetree/bindings/regulator/ |
H A D | pv88060.txt | 4 - compatible: "pvs,pv88060". 5 - reg: I2C slave address, usually 0x49. 6 - interrupts: the interrupt outputs of the controller 7 - regulators: A node that houses a sub-node for each regulator within the 8 device. Each sub-node is identified using the node's name, with valid 9 values listed below. The content of each sub-node is defined by the 15 - Any optional property defined in regulator.txt 22 interrupt-parent = <&gpio>; 27 regulator-name = "buck1"; 28 regulator-min-microvolt = <2800000>; [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | kirkwood-synology.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 12 pinctrl: pin-controller@10000 { 13 pmx_alarmled_12: pmx-alarmled-12 { 18 pmx_fanctrl_15: pmx-fanctrl-15 { 23 pmx_fanctrl_16: pmx-fanctrl-16 { 28 pmx_fanctrl_17: pmx-fanctrl-17 { 33 pmx_fanalarm_18: pmx-fanalarm-18 { 38 pmx_hddled_20: pmx-hddled-20 { 43 pmx_hddled_21: pmx-hddled-21 { 48 pmx_hddled_22: pmx-hddled-22 { [all …]
|
H A D | sunxi-common-regulators.dtsi | 2 * sunxi boards common regulator (ahci target power supply, usb-vbus) code 4 * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> 6 * This file is dual-licensed: you can use it either under the terms 45 #include <dt-bindings/gpio/gpio.h> 46 #include <dt-bindings/pinctrl/sun4i-a10.h> 79 reg_ahci_5v: ahci-5v { 80 compatible = "regulator-fixed"; 81 pinctrl-names = "default"; 82 pinctrl-0 = <&ahci_pwr_pin_a>; 83 regulator-name = "ahci-5v"; [all …]
|
H A D | armada-388-gp.dts | 3 * (RD-88F6820-GP) 7 * Gregory CLEMENT <gregory.clement@free-electrons.com> 9 * This file is dual-licensed: you can use it either under the terms 42 /dts-v1/; 43 #include "armada-388.dtsi" 44 #include <dt-bindings/gpio/gpio.h> 48 compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; 51 stdout-path = "serial0:115200n8"; 69 internal-regs { 71 pinctrl-names = "default"; [all …]
|
H A D | tegra30-cardhu.dts | 1 /dts-v1/; 10 stdout-path = &uarta; 30 pcie-controller@00003000 { 34 avdd-pexb-supply = <&ldo1_reg>; 35 vdd-pexb-supply = <&ldo1_reg>; 36 avdd-pex-pll-supply = <&ldo1_reg>; 37 hvdd-pex-supply = <&pex_hvdd_3v3_reg>; 38 vddio-pex-ctl-supply = <&sys_3v3_reg>; 39 avdd-plle-supply = <&ldo2_reg>; 42 nvidia,num-lanes = <4>; [all …]
|
H A D | tegra30-beaver.dts | 1 /dts-v1/; 10 stdout-path = &uarta; 31 pcie-controller@00003000 { 34 avdd-pexa-supply = <&ldo1_reg>; 35 vdd-pexa-supply = <&ldo1_reg>; 36 avdd-pexb-supply = <&ldo1_reg>; 37 vdd-pexb-supply = <&ldo1_reg>; 38 avdd-pex-pll-supply = <&ldo1_reg>; 39 avdd-plle-supply = <&ldo1_reg>; 40 vddio-pex-ctl-supply = <&sys_3v3_reg>; [all …]
|
H A D | rk3036-sdk.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /dts-v1/; 11 model = "SDK-RK3036"; 12 compatible = "sdk,sdk-rk3036", "rockchip,rk3036"; 15 stdout-path = &uart2; 18 vcc5v0_otg: vcc5v0-otg-drv { 19 compatible = "regulator-fixed"; 20 regulator-name = "vcc5v0_otg"; 22 pinctrl-names = "default"; 23 pinctrl-0 = <&otg_vbus_drv>; [all …]
|
H A D | rk3128-evb.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /dts-v1/; 12 compatible = "rockchip,rk3128-evb", "rockchip,rk3128"; 15 stdout-path = &uart2; 18 vcc5v0_otg: vcc5v0-otg-drv { 19 compatible = "regulator-fixed"; 20 regulator-name = "vcc5v0_otg"; 22 pinctrl-names = "default"; 23 pinctrl-0 = <&otg_vbus_drv>; 24 regulator-min-microvolt = <5000000>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/marvell/ |
H A D | kirkwood-synology.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 12 pinctrl: pin-controller@10000 { 13 pmx_alarmled_12: pmx-alarmled-12 { 18 pmx_fanctrl_15: pmx-fanctrl-15 { 23 pmx_fanctrl_16: pmx-fanctrl-16 { 28 pmx_fanctrl_17: pmx-fanctrl-17 { 33 pmx_fanalarm_18: pmx-fanalarm-18 { 38 pmx_hddled_20: pmx-hddled-20 { 43 pmx_hddled_21: pmx-hddled-21 { 48 pmx_hddled_22: pmx-hddled-22 { [all …]
|
H A D | armada-388-gp.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 4 * (RD-88F6820-GP) 8 * Gregory CLEMENT <gregory.clement@free-electrons.com> 11 /dts-v1/; 12 #include "armada-388.dtsi" 13 #include <dt-bindings/gpio/gpio.h> 16 model = "Marvell Armada 388 DB-88F6820-GP"; 17 compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380"; 20 stdout-path = "serial0:115200n8"; 35 internal-regs { [all …]
|
H A D | kirkwood-net5big.dts | 1 // SPDX-License-Identifier: GPL-2.0 9 * Based on netxbig_v2-setup.c, 14 /dts-v1/; 17 #include "kirkwood-6281.dtsi" 18 #include "kirkwood-netxbig.dtsi" 22 compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; 33 compatible = "regulator-fixed"; 35 regulator-name = "hdd1power"; 36 regulator-min-microvolt = <5000000>; 37 regulator-max-microvolt = <5000000>; [all …]
|
H A D | kirkwood-laplug.dts | 1 // SPDX-License-Identifier: GPL-2.0 7 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/input/input.h> 12 #include "kirkwood-6192.dtsi" 16 compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood"; 25 stdout-path = &uart0; 43 pinctrl: pin-controller@10000 { 44 pmx_usb_power_enable: pmx-usb-power-enable { 52 compatible = "gpio-keys"; [all …]
|
/openbmc/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra30-cardhu-a04.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include "tegra30-cardhu.dtsi" 10 compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; 14 power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; 15 bus-width = <4>; 16 keep-power-in-suspend; 19 ddr_reg: regulator-ddr { 20 compatible = "regulator-fixed"; 21 regulator-name = "ddr"; [all …]
|
H A D | tegra30-cardhu-a02.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include "tegra30-cardhu.dtsi" 10 compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; 14 power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; 15 bus-width = <4>; 16 keep-power-in-suspend; 19 ddr_reg: regulator-ddr { 20 compatible = "regulator-fixed"; 21 regulator-name = "vdd_ddr"; [all …]
|
H A D | tegra30-colibri-eval-v3.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include "tegra30-colibri.dtsi" 9 compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", 22 stdout-path = "serial0:115200n8"; 35 hdmi-supply = <®_5v0>; 39 /* Colibri UART-A */ 41 /delete-property/ dmas; 42 /delete-property/ dma-names; [all …]
|
H A D | tegra20-colibri-iris.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include "tegra20-colibri.dtsi" 9 compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20", 22 stdout-path = "serial0:115200n8"; 35 hdmi-supply = <®_5v0>; 41 bl-on { 49 hotplug-detect { 85 uart-a { [all …]
|
H A D | tegra30-apalis-eval.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include "tegra30-apalis.dtsi" 9 compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", 23 stdout-path = "serial0:115200n8"; 46 hdmi-supply = <®_5v0>; 52 pex-perst-n-hog { 53 gpio-hog; 55 output-high; [all …]
|
H A D | tegra20-colibri-eval-v3.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include "tegra20-colibri.dtsi" 9 compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20", 22 stdout-path = "serial0:115200n8"; 35 hdmi-supply = <®_5v0>; 41 bl-on { 49 hotplug-detect { 85 uart-a { [all …]
|
H A D | tegra124-apalis-v1.2-eval.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 3 * Copyright 2016-2018 Toradex AG 6 /dts-v1/; 8 #include <dt-bindings/input/input.h> 9 #include "tegra124-apalis-v1.2.dtsi" 13 compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval", 14 "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1", 28 stdout-path = "serial0:115200n8"; 40 hdmi-supply = <®_5v0>; 46 pex-perst-n-hog { [all …]
|
H A D | tegra124-apalis-eval.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR X11 3 * Copyright 2016-2019 Toradex AG 6 /dts-v1/; 8 #include <dt-bindings/input/input.h> 9 #include "tegra124-apalis.dtsi" 13 compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1", 27 stdout-path = "serial0:115200n8"; 39 hdmi-supply = <®_5v0>; 45 pex-perst-n-hog { 46 gpio-hog; [all …]
|
/openbmc/linux/arch/arm/boot/dts/allwinner/ |
H A D | sunxi-common-regulators.dtsi | 2 * sunxi boards common regulator (ahci target power supply, usb-vbus) code 4 * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> 6 * This file is dual-licensed: you can use it either under the terms 45 #include <dt-bindings/gpio/gpio.h> 48 reg_ahci_5v: ahci-5v { 49 compatible = "regulator-fixed"; 50 regulator-name = "ahci-5v"; 51 regulator-min-microvolt = <5000000>; 52 regulator-max-microvolt = <5000000>; 53 regulator-boot-on; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/mediatek/ |
H A D | mt2712-evb.dts | 5 * SPDX-License-Identifier: (GPL-2.0 OR MIT) 8 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 14 chassis-type = "embedded"; 15 compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; 27 stdout-path = "serial0:921600n8"; 30 cpus_fixed_vproc0: regulator-vproc-buck0 { 31 compatible = "regulator-fixed"; 32 regulator-name = "vproc_buck0"; 33 regulator-min-microvolt = <1000000>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/synaptics/ |
H A D | berlin2q-marvell-dmp.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 3 * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> 6 /dts-v1/; 8 #include <dt-bindings/gpio/gpio.h> 12 model = "Marvell BG2-Q DMP"; 13 compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin"; 22 stdout-path = "serial0:115200n8"; 26 compatible = "simple-bus"; 27 #address-cells = <1>; 28 #size-cells = <0>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6dl-b1x5pv2.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 6 // Copyright 2018-2021 General Electric Company 7 // Copyright 2018-2021 Collabora 9 #include <dt-bindings/input/input.h> 10 #include "imx6dl-qmx6.dtsi" 14 stdout-path = &uart3; 20 operating-points = < 25 fsl,soc-operating-points = < 26 /* ARM kHz SOC-PU uV */ 33 operating-points = < [all …]
|
/openbmc/linux/arch/arm/boot/dts/rockchip/ |
H A D | rk3066a-rayeager.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 7 #include <dt-bindings/input/input.h> 12 compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; 25 ir: ir-receiver { 26 compatible = "gpio-ir-receiver"; 28 pinctrl-names = "default"; 29 pinctrl-0 = <&ir_int>; 32 keys: gpio-keys { 33 compatible = "gpio-keys"; [all …]
|