xref: /openbmc/linux/drivers/media/pci/zoran/zr36016.c (revision 2a0c2806)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Zoran ZR36016 basic configuration functions
4  *
5  * Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at>
6  */
7 
8 #include <linux/module.h>
9 #include <linux/init.h>
10 #include <linux/slab.h>
11 
12 /* headerfile of this module */
13 #include "zr36016.h"
14 
15 /* codec io API */
16 #include "videocodec.h"
17 
18 /*
19  * it doesn't make sense to have more than 20 or so,
20  * just to prevent some unwanted loops
21  */
22 #define MAX_CODECS 20
23 
24 /* amount of chips attached via this driver */
25 static int zr36016_codecs;
26 
27 /*
28  * Local hardware I/O functions: read/write via codec layer
29  * (registers are located in the master device)
30  */
31 
32 /* read and write functions */
zr36016_read(struct zr36016 * ptr,u16 reg)33 static u8 zr36016_read(struct zr36016 *ptr, u16 reg)
34 {
35 	u8 value = 0;
36 	struct zoran *zr = videocodec_to_zoran(ptr->codec);
37 
38 	/* just in case something is wrong... */
39 	if (ptr->codec->master_data->readreg)
40 		value = (ptr->codec->master_data->readreg(ptr->codec, reg)) & 0xFF;
41 	else
42 		zrdev_err(zr, "%s: invalid I/O setup, nothing read!\n", ptr->name);
43 
44 	zrdev_dbg(zr, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, value);
45 
46 	return value;
47 }
48 
zr36016_write(struct zr36016 * ptr,u16 reg,u8 value)49 static void zr36016_write(struct zr36016 *ptr, u16 reg, u8 value)
50 {
51 	struct zoran *zr = videocodec_to_zoran(ptr->codec);
52 
53 	zrdev_dbg(zr, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, reg);
54 
55 	// just in case something is wrong...
56 	if (ptr->codec->master_data->writereg)
57 		ptr->codec->master_data->writereg(ptr->codec, reg, value);
58 	else
59 		zrdev_err(zr, "%s: invalid I/O setup, nothing written!\n", ptr->name);
60 }
61 
62 /*
63  * indirect read and write functions
64  *
65  * the 016 supports auto-addr-increment, but
66  * writing it all time cost not much and is safer...
67  */
zr36016_readi(struct zr36016 * ptr,u16 reg)68 static u8 zr36016_readi(struct zr36016 *ptr, u16 reg)
69 {
70 	u8 value = 0;
71 	struct zoran *zr = videocodec_to_zoran(ptr->codec);
72 
73 	/* just in case something is wrong... */
74 	if ((ptr->codec->master_data->writereg) && (ptr->codec->master_data->readreg)) {
75 		ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F);
76 		value = (ptr->codec->master_data->readreg(ptr->codec, ZR016_IDATA)) & 0xFF;
77 	} else {
78 		zrdev_err(zr, "%s: invalid I/O setup, nothing read (i)!\n", ptr->name);
79 	}
80 
81 	zrdev_dbg(zr, "%s: reading indirect from 0x%04x: %02x\n",
82 		  ptr->name, reg, value);
83 	return value;
84 }
85 
zr36016_writei(struct zr36016 * ptr,u16 reg,u8 value)86 static void zr36016_writei(struct zr36016 *ptr, u16 reg, u8 value)
87 {
88 	struct zoran *zr = videocodec_to_zoran(ptr->codec);
89 
90 	zrdev_dbg(zr, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name,
91 		  value, reg);
92 
93 	/* just in case something is wrong... */
94 	if (ptr->codec->master_data->writereg) {
95 		ptr->codec->master_data->writereg(ptr->codec, ZR016_IADDR, reg & 0x0F);
96 		ptr->codec->master_data->writereg(ptr->codec, ZR016_IDATA, value & 0x0FF);
97 	} else {
98 		zrdev_err(zr, "%s: invalid I/O setup, nothing written (i)!\n", ptr->name);
99 	}
100 }
101 
102 /* Local helper function: version read */
103 
104 /* version kept in datastructure */
zr36016_read_version(struct zr36016 * ptr)105 static u8 zr36016_read_version(struct zr36016 *ptr)
106 {
107 	ptr->version = zr36016_read(ptr, 0) >> 4;
108 	return ptr->version;
109 }
110 
111 /*
112  * Local helper function: basic test of "connectivity", writes/reads
113  * to/from PAX-Lo register
114  */
115 
zr36016_basic_test(struct zr36016 * ptr)116 static int zr36016_basic_test(struct zr36016 *ptr)
117 {
118 	struct zoran *zr = videocodec_to_zoran(ptr->codec);
119 
120 	if (*KERN_INFO <= CONSOLE_LOGLEVEL_DEFAULT) {
121 		int i;
122 
123 		zr36016_writei(ptr, ZR016I_PAX_LO, 0x55);
124 		zrdev_dbg(zr, "%s: registers: ", ptr->name);
125 		for (i = 0; i <= 0x0b; i++)
126 			zrdev_dbg(zr, "%02x ", zr36016_readi(ptr, i));
127 		zrdev_dbg(zr, "\n");
128 	}
129 	// for testing just write 0, then the default value to a register and read
130 	// it back in both cases
131 	zr36016_writei(ptr, ZR016I_PAX_LO, 0x00);
132 	if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) {
133 		zrdev_err(zr, "%s: attach failed, can't connect to vfe processor!\n", ptr->name);
134 		return -ENXIO;
135 	}
136 	zr36016_writei(ptr, ZR016I_PAX_LO, 0x0d0);
137 	if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0d0) {
138 		zrdev_err(zr, "%s: attach failed, can't connect to vfe processor!\n", ptr->name);
139 		return -ENXIO;
140 	}
141 	// we allow version numbers from 0-3, should be enough, though
142 	zr36016_read_version(ptr);
143 	if (ptr->version & 0x0c) {
144 		zrdev_err(zr, "%s: attach failed, suspicious version %d found...\n", ptr->name,
145 			  ptr->version);
146 		return -ENXIO;
147 	}
148 
149 	return 0;		/* looks good! */
150 }
151 
152 /* Basic datasets & init */
153 
zr36016_init(struct zr36016 * ptr)154 static void zr36016_init(struct zr36016 *ptr)
155 {
156 	// stop any processing
157 	zr36016_write(ptr, ZR016_GOSTOP, 0);
158 
159 	// mode setup (yuv422 in and out, compression/expansuon due to mode)
160 	zr36016_write(ptr, ZR016_MODE,
161 		      ZR016_YUV422 | ZR016_YUV422_YUV422 |
162 		      (ptr->mode == CODEC_DO_COMPRESSION ?
163 		       ZR016_COMPRESSION : ZR016_EXPANSION));
164 
165 	// misc setup
166 	zr36016_writei(ptr, ZR016I_SETUP1,
167 		       (ptr->xdec ? (ZR016_HRFL | ZR016_HORZ) : 0) |
168 		       (ptr->ydec ? ZR016_VERT : 0) | ZR016_CNTI);
169 	zr36016_writei(ptr, ZR016I_SETUP2, ZR016_CCIR);
170 
171 	// Window setup
172 	// (no extra offset for now, norm defines offset, default width height)
173 	zr36016_writei(ptr, ZR016I_PAX_HI, ptr->width >> 8);
174 	zr36016_writei(ptr, ZR016I_PAX_LO, ptr->width & 0xFF);
175 	zr36016_writei(ptr, ZR016I_PAY_HI, ptr->height >> 8);
176 	zr36016_writei(ptr, ZR016I_PAY_LO, ptr->height & 0xFF);
177 	zr36016_writei(ptr, ZR016I_NAX_HI, ptr->xoff >> 8);
178 	zr36016_writei(ptr, ZR016I_NAX_LO, ptr->xoff & 0xFF);
179 	zr36016_writei(ptr, ZR016I_NAY_HI, ptr->yoff >> 8);
180 	zr36016_writei(ptr, ZR016I_NAY_LO, ptr->yoff & 0xFF);
181 
182 	/* shall we continue now, please? */
183 	zr36016_write(ptr, ZR016_GOSTOP, 1);
184 }
185 
186 /*
187  * CODEC API FUNCTIONS
188  *
189  * These functions are accessed by the master via the API structure
190  */
191 
192 /*
193  * set compression/expansion mode and launches codec -
194  * this should be the last call from the master before starting processing
195  */
zr36016_set_mode(struct videocodec * codec,int mode)196 static int zr36016_set_mode(struct videocodec *codec, int mode)
197 {
198 	struct zr36016 *ptr = (struct zr36016 *)codec->data;
199 	struct zoran *zr = videocodec_to_zoran(codec);
200 
201 	zrdev_dbg(zr, "%s: set_mode %d call\n", ptr->name, mode);
202 
203 	if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
204 		return -EINVAL;
205 
206 	ptr->mode = mode;
207 	zr36016_init(ptr);
208 
209 	return 0;
210 }
211 
212 /* set picture size */
zr36016_set_video(struct videocodec * codec,const struct tvnorm * norm,struct vfe_settings * cap,struct vfe_polarity * pol)213 static int zr36016_set_video(struct videocodec *codec, const struct tvnorm *norm,
214 			     struct vfe_settings *cap, struct vfe_polarity *pol)
215 {
216 	struct zr36016 *ptr = (struct zr36016 *)codec->data;
217 	struct zoran *zr = videocodec_to_zoran(codec);
218 
219 	zrdev_dbg(zr, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) call\n",
220 		  ptr->name, norm->h_start, norm->v_start,
221 		  cap->x, cap->y, cap->width, cap->height,
222 		  cap->decimation);
223 
224 	/*
225 	 * if () return -EINVAL;
226 	 * trust the master driver that it knows what it does - so
227 	 * we allow invalid startx/y for now ...
228 	 */
229 	ptr->width = cap->width;
230 	ptr->height = cap->height;
231 	/*
232 	 * (Ronald) This is ugly. zoran_device.c, line 387
233 	 * already mentions what happens if h_start is even
234 	 * (blue faces, etc., cr/cb inversed). There's probably
235 	 * some good reason why h_start is 0 instead of 1, so I'm
236 	 * leaving it to this for now, but really... This can be
237 	 * done a lot simpler
238 	 */
239 	ptr->xoff = (norm->h_start ? norm->h_start : 1) + cap->x;
240 	/*
241 	 * Something to note here (I don't understand it), setting
242 	 * v_start too high will cause the codec to 'not work'. I
243 	 * really don't get it. values of 16 (v_start) already break
244 	 * it here. Just '0' seems to work. More testing needed!
245 	 */
246 	ptr->yoff = norm->v_start + cap->y;
247 	/* (Ronald) dzjeeh, can't this thing do hor_decimation = 4? */
248 	ptr->xdec = ((cap->decimation & 0xff) == 1) ? 0 : 1;
249 	ptr->ydec = (((cap->decimation >> 8) & 0xff) == 1) ? 0 : 1;
250 
251 	return 0;
252 }
253 
254 /* additional control functions */
zr36016_control(struct videocodec * codec,int type,int size,void * data)255 static int zr36016_control(struct videocodec *codec, int type, int size, void *data)
256 {
257 	struct zr36016 *ptr = (struct zr36016 *)codec->data;
258 	struct zoran *zr = videocodec_to_zoran(codec);
259 	int *ival = (int *)data;
260 
261 	zrdev_dbg(zr, "%s: control %d call with %d byte\n",
262 		  ptr->name, type, size);
263 
264 	switch (type) {
265 	case CODEC_G_STATUS:	/* get last status - we don't know it ... */
266 		if (size != sizeof(int))
267 			return -EFAULT;
268 		*ival = 0;
269 		break;
270 
271 	case CODEC_G_CODEC_MODE:
272 		if (size != sizeof(int))
273 			return -EFAULT;
274 		*ival = 0;
275 		break;
276 
277 	case CODEC_S_CODEC_MODE:
278 		if (size != sizeof(int))
279 			return -EFAULT;
280 		if (*ival != 0)
281 			return -EINVAL;
282 		/* not needed, do nothing */
283 		return 0;
284 
285 	case CODEC_G_VFE:
286 	case CODEC_S_VFE:
287 		return 0;
288 
289 	case CODEC_S_MMAP:
290 		/* not available, give an error */
291 		return -ENXIO;
292 
293 	default:
294 		return -EINVAL;
295 	}
296 
297 	return size;
298 }
299 
300 /*
301  * Exit and unregister function:
302  *
303  * Deinitializes Zoran's JPEG processor
304  */
305 
zr36016_unset(struct videocodec * codec)306 static int zr36016_unset(struct videocodec *codec)
307 {
308 	struct zr36016 *ptr = codec->data;
309 	struct zoran *zr = videocodec_to_zoran(codec);
310 
311 	if (ptr) {
312 		/* do wee need some codec deinit here, too ???? */
313 
314 		zrdev_dbg(zr, "%s: finished codec #%d\n", ptr->name, ptr->num);
315 		kfree(ptr);
316 		codec->data = NULL;
317 
318 		zr36016_codecs--;
319 		return 0;
320 	}
321 
322 	return -EFAULT;
323 }
324 
325 /*
326  * Setup and registry function:
327  *
328  * Initializes Zoran's JPEG processor
329  *
330  * Also sets pixel size, average code size, mode (compr./decompr.)
331  * (the given size is determined by the processor with the video interface)
332  */
333 
zr36016_setup(struct videocodec * codec)334 static int zr36016_setup(struct videocodec *codec)
335 {
336 	struct zr36016 *ptr;
337 	struct zoran *zr = videocodec_to_zoran(codec);
338 	int res;
339 
340 	zrdev_dbg(zr, "zr36016: initializing VFE subsystem #%d.\n", zr36016_codecs);
341 
342 	if (zr36016_codecs == MAX_CODECS) {
343 		zrdev_err(zr, "zr36016: Can't attach more codecs!\n");
344 		return -ENOSPC;
345 	}
346 	//mem structure init
347 	ptr = kzalloc(sizeof(*ptr), GFP_KERNEL);
348 	codec->data = ptr;
349 	if (!ptr)
350 		return -ENOMEM;
351 
352 	snprintf(ptr->name, sizeof(ptr->name), "zr36016[%d]", zr36016_codecs);
353 	ptr->num = zr36016_codecs++;
354 	ptr->codec = codec;
355 
356 	//testing
357 	res = zr36016_basic_test(ptr);
358 	if (res < 0) {
359 		zr36016_unset(codec);
360 		return res;
361 	}
362 	//final setup
363 	ptr->mode = CODEC_DO_COMPRESSION;
364 	ptr->width = 768;
365 	ptr->height = 288;
366 	ptr->xdec = 1;
367 	ptr->ydec = 0;
368 	zr36016_init(ptr);
369 
370 	zrdev_dbg(zr, "%s: codec v%d attached and running\n",
371 		  ptr->name, ptr->version);
372 
373 	return 0;
374 }
375 
376 static const struct videocodec zr36016_codec = {
377 	.name = "zr36016",
378 	.magic = 0L,		/* magic not used */
379 	.flags =
380 	    CODEC_FLAG_HARDWARE | CODEC_FLAG_VFE | CODEC_FLAG_ENCODER |
381 	    CODEC_FLAG_DECODER,
382 	.type = CODEC_TYPE_ZR36016,
383 	.setup = zr36016_setup,	/* functionality */
384 	.unset = zr36016_unset,
385 	.set_mode = zr36016_set_mode,
386 	.set_video = zr36016_set_video,
387 	.control = zr36016_control,
388 	/* others are not used */
389 };
390 
391 /* HOOK IN DRIVER AS KERNEL MODULE */
392 
zr36016_init_module(void)393 int zr36016_init_module(void)
394 {
395 	zr36016_codecs = 0;
396 	return videocodec_register(&zr36016_codec);
397 }
398 
zr36016_cleanup_module(void)399 void zr36016_cleanup_module(void)
400 {
401 	if (zr36016_codecs) {
402 		pr_debug("zr36016: something's wrong - %d codecs left somehow.\n",
403 			 zr36016_codecs);
404 	}
405 	videocodec_unregister(&zr36016_codec);
406 }
407