xref: /openbmc/linux/include/linux/soundwire/sdw.h (revision 154cfc3d)
1 /* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
2 /* Copyright(c) 2015-17 Intel Corporation. */
3 
4 #ifndef __SOUNDWIRE_H
5 #define __SOUNDWIRE_H
6 
7 #include <linux/bug.h>
8 #include <linux/lockdep_types.h>
9 #include <linux/irq.h>
10 #include <linux/irqdomain.h>
11 #include <linux/mod_devicetable.h>
12 #include <linux/bitfield.h>
13 
14 struct sdw_bus;
15 struct sdw_slave;
16 
17 /* SDW spec defines and enums, as defined by MIPI 1.1. Spec */
18 
19 /* SDW Broadcast Device Number */
20 #define SDW_BROADCAST_DEV_NUM		15
21 
22 /* SDW Enumeration Device Number */
23 #define SDW_ENUM_DEV_NUM		0
24 
25 /* SDW Group Device Numbers */
26 #define SDW_GROUP12_DEV_NUM		12
27 #define SDW_GROUP13_DEV_NUM		13
28 
29 /* SDW Master Device Number, not supported yet */
30 #define SDW_MASTER_DEV_NUM		14
31 
32 #define SDW_NUM_DEV_ID_REGISTERS	6
33 /* frame shape defines */
34 
35 /*
36  * Note: The maximum row define in SoundWire spec 1.1 is 23. In order to
37  * fill hole with 0, one more dummy entry is added
38  */
39 #define SDW_FRAME_ROWS		24
40 #define SDW_FRAME_COLS		8
41 #define SDW_FRAME_ROW_COLS		(SDW_FRAME_ROWS * SDW_FRAME_COLS)
42 
43 #define SDW_FRAME_CTRL_BITS		48
44 #define SDW_MAX_DEVICES			11
45 
46 #define SDW_MAX_PORTS			15
47 #define SDW_VALID_PORT_RANGE(n)		((n) < SDW_MAX_PORTS && (n) >= 1)
48 
49 enum {
50 	SDW_PORT_DIRN_SINK = 0,
51 	SDW_PORT_DIRN_SOURCE,
52 	SDW_PORT_DIRN_MAX,
53 };
54 
55 /*
56  * constants for flow control, ports and transport
57  *
58  * these are bit masks as devices can have multiple capabilities
59  */
60 
61 /*
62  * flow modes for SDW port. These can be isochronous, tx controlled,
63  * rx controlled or async
64  */
65 #define SDW_PORT_FLOW_MODE_ISOCH	0
66 #define SDW_PORT_FLOW_MODE_TX_CNTRL	BIT(0)
67 #define SDW_PORT_FLOW_MODE_RX_CNTRL	BIT(1)
68 #define SDW_PORT_FLOW_MODE_ASYNC	GENMASK(1, 0)
69 
70 /* sample packaging for block. It can be per port or per channel */
71 #define SDW_BLOCK_PACKG_PER_PORT	BIT(0)
72 #define SDW_BLOCK_PACKG_PER_CH		BIT(1)
73 
74 /**
75  * enum sdw_slave_status - Slave status
76  * @SDW_SLAVE_UNATTACHED: Slave is not attached with the bus.
77  * @SDW_SLAVE_ATTACHED: Slave is attached with bus.
78  * @SDW_SLAVE_ALERT: Some alert condition on the Slave
79  * @SDW_SLAVE_RESERVED: Reserved for future use
80  */
81 enum sdw_slave_status {
82 	SDW_SLAVE_UNATTACHED = 0,
83 	SDW_SLAVE_ATTACHED = 1,
84 	SDW_SLAVE_ALERT = 2,
85 	SDW_SLAVE_RESERVED = 3,
86 };
87 
88 /**
89  * enum sdw_clk_stop_type: clock stop operations
90  *
91  * @SDW_CLK_PRE_PREPARE: pre clock stop prepare
92  * @SDW_CLK_POST_PREPARE: post clock stop prepare
93  * @SDW_CLK_PRE_DEPREPARE: pre clock stop de-prepare
94  * @SDW_CLK_POST_DEPREPARE: post clock stop de-prepare
95  */
96 enum sdw_clk_stop_type {
97 	SDW_CLK_PRE_PREPARE = 0,
98 	SDW_CLK_POST_PREPARE,
99 	SDW_CLK_PRE_DEPREPARE,
100 	SDW_CLK_POST_DEPREPARE,
101 };
102 
103 /**
104  * enum sdw_command_response - Command response as defined by SDW spec
105  * @SDW_CMD_OK: cmd was successful
106  * @SDW_CMD_IGNORED: cmd was ignored
107  * @SDW_CMD_FAIL: cmd was NACKed
108  * @SDW_CMD_TIMEOUT: cmd timedout
109  * @SDW_CMD_FAIL_OTHER: cmd failed due to other reason than above
110  *
111  * NOTE: The enum is different than actual Spec as response in the Spec is
112  * combination of ACK/NAK bits
113  *
114  * SDW_CMD_TIMEOUT/FAIL_OTHER is defined for SW use, not in spec
115  */
116 enum sdw_command_response {
117 	SDW_CMD_OK = 0,
118 	SDW_CMD_IGNORED = 1,
119 	SDW_CMD_FAIL = 2,
120 	SDW_CMD_TIMEOUT = 3,
121 	SDW_CMD_FAIL_OTHER = 4,
122 };
123 
124 /* block group count enum */
125 enum sdw_dpn_grouping {
126 	SDW_BLK_GRP_CNT_1 = 0,
127 	SDW_BLK_GRP_CNT_2 = 1,
128 	SDW_BLK_GRP_CNT_3 = 2,
129 	SDW_BLK_GRP_CNT_4 = 3,
130 };
131 
132 /* block packing mode enum */
133 enum sdw_dpn_pkg_mode {
134 	SDW_BLK_PKG_PER_PORT = 0,
135 	SDW_BLK_PKG_PER_CHANNEL = 1
136 };
137 
138 /**
139  * enum sdw_stream_type: data stream type
140  *
141  * @SDW_STREAM_PCM: PCM data stream
142  * @SDW_STREAM_PDM: PDM data stream
143  *
144  * spec doesn't define this, but is used in implementation
145  */
146 enum sdw_stream_type {
147 	SDW_STREAM_PCM = 0,
148 	SDW_STREAM_PDM = 1,
149 };
150 
151 /**
152  * enum sdw_data_direction: Data direction
153  *
154  * @SDW_DATA_DIR_RX: Data into Port
155  * @SDW_DATA_DIR_TX: Data out of Port
156  */
157 enum sdw_data_direction {
158 	SDW_DATA_DIR_RX = 0,
159 	SDW_DATA_DIR_TX = 1,
160 };
161 
162 /**
163  * enum sdw_port_data_mode: Data Port mode
164  *
165  * @SDW_PORT_DATA_MODE_NORMAL: Normal data mode where audio data is received
166  * and transmitted.
167  * @SDW_PORT_DATA_MODE_PRBS: Test mode which uses a PRBS generator to produce
168  * a pseudo random data pattern that is transferred
169  * @SDW_PORT_DATA_MODE_STATIC_0: Simple test mode which uses static value of
170  * logic 0. The encoding will result in no signal transitions
171  * @SDW_PORT_DATA_MODE_STATIC_1: Simple test mode which uses static value of
172  * logic 1. The encoding will result in signal transitions at every bitslot
173  * owned by this Port
174  */
175 enum sdw_port_data_mode {
176 	SDW_PORT_DATA_MODE_NORMAL = 0,
177 	SDW_PORT_DATA_MODE_PRBS = 1,
178 	SDW_PORT_DATA_MODE_STATIC_0 = 2,
179 	SDW_PORT_DATA_MODE_STATIC_1 = 3,
180 };
181 
182 /*
183  * SDW properties, defined in MIPI DisCo spec v1.0
184  */
185 enum sdw_clk_stop_reset_behave {
186 	SDW_CLK_STOP_KEEP_STATUS = 1,
187 };
188 
189 /**
190  * enum sdw_p15_behave - Slave Port 15 behaviour when the Master attempts a
191  * read
192  * @SDW_P15_READ_IGNORED: Read is ignored
193  * @SDW_P15_CMD_OK: Command is ok
194  */
195 enum sdw_p15_behave {
196 	SDW_P15_READ_IGNORED = 0,
197 	SDW_P15_CMD_OK = 1,
198 };
199 
200 /**
201  * enum sdw_dpn_type - Data port types
202  * @SDW_DPN_FULL: Full Data Port is supported
203  * @SDW_DPN_SIMPLE: Simplified Data Port as defined in spec.
204  * DPN_SampleCtrl2, DPN_OffsetCtrl2, DPN_HCtrl and DPN_BlockCtrl3
205  * are not implemented.
206  * @SDW_DPN_REDUCED: Reduced Data Port as defined in spec.
207  * DPN_SampleCtrl2, DPN_HCtrl are not implemented.
208  */
209 enum sdw_dpn_type {
210 	SDW_DPN_FULL = 0,
211 	SDW_DPN_SIMPLE = 1,
212 	SDW_DPN_REDUCED = 2,
213 };
214 
215 /**
216  * enum sdw_clk_stop_mode - Clock Stop modes
217  * @SDW_CLK_STOP_MODE0: Slave can continue operation seamlessly on clock
218  * restart
219  * @SDW_CLK_STOP_MODE1: Slave may have entered a deeper power-saving mode,
220  * not capable of continuing operation seamlessly when the clock restarts
221  */
222 enum sdw_clk_stop_mode {
223 	SDW_CLK_STOP_MODE0 = 0,
224 	SDW_CLK_STOP_MODE1 = 1,
225 };
226 
227 /**
228  * struct sdw_dp0_prop - DP0 properties
229  * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64
230  * (inclusive)
231  * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64
232  * (inclusive)
233  * @num_words: number of wordlengths supported
234  * @words: wordlengths supported
235  * @BRA_flow_controlled: Slave implementation results in an OK_NotReady
236  * response
237  * @simple_ch_prep_sm: If channel prepare sequence is required
238  * @imp_def_interrupts: If set, each bit corresponds to support for
239  * implementation-defined interrupts
240  *
241  * The wordlengths are specified by Spec as max, min AND number of
242  * discrete values, implementation can define based on the wordlengths they
243  * support
244  */
245 struct sdw_dp0_prop {
246 	u32 max_word;
247 	u32 min_word;
248 	u32 num_words;
249 	u32 *words;
250 	bool BRA_flow_controlled;
251 	bool simple_ch_prep_sm;
252 	bool imp_def_interrupts;
253 };
254 
255 /**
256  * struct sdw_dpn_audio_mode - Audio mode properties for DPn
257  * @bus_min_freq: Minimum bus frequency, in Hz
258  * @bus_max_freq: Maximum bus frequency, in Hz
259  * @bus_num_freq: Number of discrete frequencies supported
260  * @bus_freq: Discrete bus frequencies, in Hz
261  * @min_freq: Minimum sampling frequency, in Hz
262  * @max_freq: Maximum sampling bus frequency, in Hz
263  * @num_freq: Number of discrete sampling frequency supported
264  * @freq: Discrete sampling frequencies, in Hz
265  * @prep_ch_behave: Specifies the dependencies between Channel Prepare
266  * sequence and bus clock configuration
267  * If 0, Channel Prepare can happen at any Bus clock rate
268  * If 1, Channel Prepare sequence shall happen only after Bus clock is
269  * changed to a frequency supported by this mode or compatible modes
270  * described by the next field
271  * @glitchless: Bitmap describing possible glitchless transitions from this
272  * Audio Mode to other Audio Modes
273  */
274 struct sdw_dpn_audio_mode {
275 	u32 bus_min_freq;
276 	u32 bus_max_freq;
277 	u32 bus_num_freq;
278 	u32 *bus_freq;
279 	u32 max_freq;
280 	u32 min_freq;
281 	u32 num_freq;
282 	u32 *freq;
283 	u32 prep_ch_behave;
284 	u32 glitchless;
285 };
286 
287 /**
288  * struct sdw_dpn_prop - Data Port DPn properties
289  * @num: port number
290  * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64
291  * (inclusive)
292  * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64
293  * (inclusive)
294  * @num_words: Number of discrete supported wordlengths
295  * @words: Discrete supported wordlength
296  * @type: Data port type. Full, Simplified or Reduced
297  * @max_grouping: Maximum number of samples that can be grouped together for
298  * a full data port
299  * @simple_ch_prep_sm: If the port supports simplified channel prepare state
300  * machine
301  * @ch_prep_timeout: Port-specific timeout value, in milliseconds
302  * @imp_def_interrupts: If set, each bit corresponds to support for
303  * implementation-defined interrupts
304  * @max_ch: Maximum channels supported
305  * @min_ch: Minimum channels supported
306  * @num_channels: Number of discrete channels supported
307  * @channels: Discrete channels supported
308  * @num_ch_combinations: Number of channel combinations supported
309  * @ch_combinations: Channel combinations supported
310  * @modes: SDW mode supported
311  * @max_async_buffer: Number of samples that this port can buffer in
312  * asynchronous modes
313  * @block_pack_mode: Type of block port mode supported
314  * @read_only_wordlength: Read Only wordlength field in DPN_BlockCtrl1 register
315  * @port_encoding: Payload Channel Sample encoding schemes supported
316  * @audio_modes: Audio modes supported
317  */
318 struct sdw_dpn_prop {
319 	u32 num;
320 	u32 max_word;
321 	u32 min_word;
322 	u32 num_words;
323 	u32 *words;
324 	enum sdw_dpn_type type;
325 	u32 max_grouping;
326 	bool simple_ch_prep_sm;
327 	u32 ch_prep_timeout;
328 	u32 imp_def_interrupts;
329 	u32 max_ch;
330 	u32 min_ch;
331 	u32 num_channels;
332 	u32 *channels;
333 	u32 num_ch_combinations;
334 	u32 *ch_combinations;
335 	u32 modes;
336 	u32 max_async_buffer;
337 	bool block_pack_mode;
338 	bool read_only_wordlength;
339 	u32 port_encoding;
340 	struct sdw_dpn_audio_mode *audio_modes;
341 };
342 
343 /**
344  * struct sdw_slave_prop - SoundWire Slave properties
345  * @mipi_revision: Spec version of the implementation
346  * @wake_capable: Wake-up events are supported
347  * @test_mode_capable: If test mode is supported
348  * @clk_stop_mode1: Clock-Stop Mode 1 is supported
349  * @simple_clk_stop_capable: Simple clock mode is supported
350  * @clk_stop_timeout: Worst-case latency of the Clock Stop Prepare State
351  * Machine transitions, in milliseconds
352  * @ch_prep_timeout: Worst-case latency of the Channel Prepare State Machine
353  * transitions, in milliseconds
354  * @reset_behave: Slave keeps the status of the SlaveStopClockPrepare
355  * state machine (P=1 SCSP_SM) after exit from clock-stop mode1
356  * @high_PHY_capable: Slave is HighPHY capable
357  * @paging_support: Slave implements paging registers SCP_AddrPage1 and
358  * SCP_AddrPage2
359  * @bank_delay_support: Slave implements bank delay/bridge support registers
360  * SCP_BankDelay and SCP_NextFrame
361  * @p15_behave: Slave behavior when the Master attempts a read to the Port15
362  * alias
363  * @lane_control_support: Slave supports lane control
364  * @master_count: Number of Masters present on this Slave
365  * @source_ports: Bitmap identifying source ports
366  * @sink_ports: Bitmap identifying sink ports
367  * @dp0_prop: Data Port 0 properties
368  * @src_dpn_prop: Source Data Port N properties
369  * @sink_dpn_prop: Sink Data Port N properties
370  * @scp_int1_mask: SCP_INT1_MASK desired settings
371  * @quirks: bitmask identifying deltas from the MIPI specification
372  * @clock_reg_supported: the Peripheral implements the clock base and scale
373  * registers introduced with the SoundWire 1.2 specification. SDCA devices
374  * do not need to set this boolean property as the registers are required.
375  * @use_domain_irq: call actual IRQ handler on slave, as well as callback
376  */
377 struct sdw_slave_prop {
378 	u32 mipi_revision;
379 	bool wake_capable;
380 	bool test_mode_capable;
381 	bool clk_stop_mode1;
382 	bool simple_clk_stop_capable;
383 	u32 clk_stop_timeout;
384 	u32 ch_prep_timeout;
385 	enum sdw_clk_stop_reset_behave reset_behave;
386 	bool high_PHY_capable;
387 	bool paging_support;
388 	bool bank_delay_support;
389 	enum sdw_p15_behave p15_behave;
390 	bool lane_control_support;
391 	u32 master_count;
392 	u32 source_ports;
393 	u32 sink_ports;
394 	struct sdw_dp0_prop *dp0_prop;
395 	struct sdw_dpn_prop *src_dpn_prop;
396 	struct sdw_dpn_prop *sink_dpn_prop;
397 	u8 scp_int1_mask;
398 	u32 quirks;
399 	bool clock_reg_supported;
400 	bool use_domain_irq;
401 };
402 
403 #define SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY	BIT(0)
404 
405 /**
406  * struct sdw_master_prop - Master properties
407  * @revision: MIPI spec version of the implementation
408  * @clk_stop_modes: Bitmap, bit N set when clock-stop-modeN supported
409  * @max_clk_freq: Maximum Bus clock frequency, in Hz
410  * @num_clk_gears: Number of clock gears supported
411  * @clk_gears: Clock gears supported
412  * @num_clk_freq: Number of clock frequencies supported, in Hz
413  * @clk_freq: Clock frequencies supported, in Hz
414  * @default_frame_rate: Controller default Frame rate, in Hz
415  * @default_row: Number of rows
416  * @default_col: Number of columns
417  * @dynamic_frame: Dynamic frame shape supported
418  * @err_threshold: Number of times that software may retry sending a single
419  * command
420  * @mclk_freq: clock reference passed to SoundWire Master, in Hz.
421  * @hw_disabled: if true, the Master is not functional, typically due to pin-mux
422  * @quirks: bitmask identifying optional behavior beyond the scope of the MIPI specification
423  */
424 struct sdw_master_prop {
425 	u32 revision;
426 	u32 clk_stop_modes;
427 	u32 max_clk_freq;
428 	u32 num_clk_gears;
429 	u32 *clk_gears;
430 	u32 num_clk_freq;
431 	u32 *clk_freq;
432 	u32 default_frame_rate;
433 	u32 default_row;
434 	u32 default_col;
435 	bool dynamic_frame;
436 	u32 err_threshold;
437 	u32 mclk_freq;
438 	bool hw_disabled;
439 	u64 quirks;
440 };
441 
442 /* Definitions for Master quirks */
443 
444 /*
445  * In a number of platforms bus clashes are reported after a hardware
446  * reset but without any explanations or evidence of a real problem.
447  * The following quirk will discard all initial bus clash interrupts
448  * but will leave the detection on should real bus clashes happen
449  */
450 #define SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH	BIT(0)
451 
452 /*
453  * Some Slave devices have known issues with incorrect parity errors
454  * reported after a hardware reset. However during integration unexplained
455  * parity errors can be reported by Slave devices, possibly due to electrical
456  * issues at the Master level.
457  * The following quirk will discard all initial parity errors but will leave
458  * the detection on should real parity errors happen.
459  */
460 #define SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY	BIT(1)
461 
462 int sdw_master_read_prop(struct sdw_bus *bus);
463 int sdw_slave_read_prop(struct sdw_slave *slave);
464 
465 /*
466  * SDW Slave Structures and APIs
467  */
468 
469 #define SDW_IGNORED_UNIQUE_ID 0xFF
470 
471 /**
472  * struct sdw_slave_id - Slave ID
473  * @mfg_id: MIPI Manufacturer ID
474  * @part_id: Device Part ID
475  * @class_id: MIPI Class ID (defined starting with SoundWire 1.2 spec)
476  * @unique_id: Device unique ID
477  * @sdw_version: SDW version implemented
478  *
479  * The order of the IDs here does not follow the DisCo spec definitions
480  */
481 struct sdw_slave_id {
482 	__u16 mfg_id;
483 	__u16 part_id;
484 	__u8 class_id;
485 	__u8 unique_id;
486 	__u8 sdw_version:4;
487 };
488 
489 struct sdw_extended_slave_id {
490 	int link_id;
491 	struct sdw_slave_id id;
492 };
493 
494 /*
495  * Helper macros to extract the MIPI-defined IDs
496  *
497  * Spec definition
498  *   Register		Bit	Contents
499  *   DevId_0 [7:4]	47:44	sdw_version
500  *   DevId_0 [3:0]	43:40	unique_id
501  *   DevId_1		39:32	mfg_id [15:8]
502  *   DevId_2		31:24	mfg_id [7:0]
503  *   DevId_3		23:16	part_id [15:8]
504  *   DevId_4		15:08	part_id [7:0]
505  *   DevId_5		07:00	class_id
506  *
507  * The MIPI DisCo for SoundWire defines in addition the link_id as bits 51:48
508  */
509 #define SDW_DISCO_LINK_ID_MASK	GENMASK_ULL(51, 48)
510 #define SDW_VERSION_MASK	GENMASK_ULL(47, 44)
511 #define SDW_UNIQUE_ID_MASK	GENMASK_ULL(43, 40)
512 #define SDW_MFG_ID_MASK		GENMASK_ULL(39, 24)
513 #define SDW_PART_ID_MASK	GENMASK_ULL(23, 8)
514 #define SDW_CLASS_ID_MASK	GENMASK_ULL(7, 0)
515 
516 #define SDW_DISCO_LINK_ID(addr)	FIELD_GET(SDW_DISCO_LINK_ID_MASK, addr)
517 #define SDW_VERSION(addr)	FIELD_GET(SDW_VERSION_MASK, addr)
518 #define SDW_UNIQUE_ID(addr)	FIELD_GET(SDW_UNIQUE_ID_MASK, addr)
519 #define SDW_MFG_ID(addr)	FIELD_GET(SDW_MFG_ID_MASK, addr)
520 #define SDW_PART_ID(addr)	FIELD_GET(SDW_PART_ID_MASK, addr)
521 #define SDW_CLASS_ID(addr)	FIELD_GET(SDW_CLASS_ID_MASK, addr)
522 
523 /**
524  * struct sdw_slave_intr_status - Slave interrupt status
525  * @sdca_cascade: set if the Slave device reports an SDCA interrupt
526  * @control_port: control port status
527  * @port: data port status
528  */
529 struct sdw_slave_intr_status {
530 	bool sdca_cascade;
531 	u8 control_port;
532 	u8 port[15];
533 };
534 
535 /**
536  * sdw_reg_bank - SoundWire register banks
537  * @SDW_BANK0: Soundwire register bank 0
538  * @SDW_BANK1: Soundwire register bank 1
539  */
540 enum sdw_reg_bank {
541 	SDW_BANK0,
542 	SDW_BANK1,
543 };
544 
545 /**
546  * struct sdw_bus_conf: Bus configuration
547  *
548  * @clk_freq: Clock frequency, in Hz
549  * @num_rows: Number of rows in frame
550  * @num_cols: Number of columns in frame
551  * @bank: Next register bank
552  */
553 struct sdw_bus_conf {
554 	unsigned int clk_freq;
555 	unsigned int num_rows;
556 	unsigned int num_cols;
557 	unsigned int bank;
558 };
559 
560 /**
561  * struct sdw_prepare_ch: Prepare/De-prepare Data Port channel
562  *
563  * @num: Port number
564  * @ch_mask: Active channel mask
565  * @prepare: Prepare (true) /de-prepare (false) channel
566  * @bank: Register bank, which bank Slave/Master driver should program for
567  * implementation defined registers. This is always updated to next_bank
568  * value read from bus params.
569  *
570  */
571 struct sdw_prepare_ch {
572 	unsigned int num;
573 	unsigned int ch_mask;
574 	bool prepare;
575 	unsigned int bank;
576 };
577 
578 /**
579  * enum sdw_port_prep_ops: Prepare operations for Data Port
580  *
581  * @SDW_OPS_PORT_PRE_PREP: Pre prepare operation for the Port
582  * @SDW_OPS_PORT_PRE_DEPREP: Pre deprepare operation for the Port
583  * @SDW_OPS_PORT_POST_PREP: Post prepare operation for the Port
584  * @SDW_OPS_PORT_POST_DEPREP: Post deprepare operation for the Port
585  */
586 enum sdw_port_prep_ops {
587 	SDW_OPS_PORT_PRE_PREP = 0,
588 	SDW_OPS_PORT_PRE_DEPREP,
589 	SDW_OPS_PORT_POST_PREP,
590 	SDW_OPS_PORT_POST_DEPREP,
591 };
592 
593 /**
594  * struct sdw_bus_params: Structure holding bus configuration
595  *
596  * @curr_bank: Current bank in use (BANK0/BANK1)
597  * @next_bank: Next bank to use (BANK0/BANK1). next_bank will always be
598  * set to !curr_bank
599  * @max_dr_freq: Maximum double rate clock frequency supported, in Hz
600  * @curr_dr_freq: Current double rate clock frequency, in Hz
601  * @bandwidth: Current bandwidth
602  * @col: Active columns
603  * @row: Active rows
604  * @s_data_mode: NORMAL, STATIC or PRBS mode for all Slave ports
605  * @m_data_mode: NORMAL, STATIC or PRBS mode for all Master ports. The value
606  * should be the same to detect transmission issues, but can be different to
607  * test the interrupt reports
608  */
609 struct sdw_bus_params {
610 	enum sdw_reg_bank curr_bank;
611 	enum sdw_reg_bank next_bank;
612 	unsigned int max_dr_freq;
613 	unsigned int curr_dr_freq;
614 	unsigned int bandwidth;
615 	unsigned int col;
616 	unsigned int row;
617 	int s_data_mode;
618 	int m_data_mode;
619 };
620 
621 /**
622  * struct sdw_slave_ops: Slave driver callback ops
623  *
624  * @read_prop: Read Slave properties
625  * @interrupt_callback: Device interrupt notification (invoked in thread
626  * context)
627  * @update_status: Update Slave status
628  * @bus_config: Update the bus config for Slave
629  * @port_prep: Prepare the port with parameters
630  * @clk_stop: handle imp-def sequences before and after prepare and de-prepare
631  */
632 struct sdw_slave_ops {
633 	int (*read_prop)(struct sdw_slave *sdw);
634 	int (*interrupt_callback)(struct sdw_slave *slave,
635 				  struct sdw_slave_intr_status *status);
636 	int (*update_status)(struct sdw_slave *slave,
637 			     enum sdw_slave_status status);
638 	int (*bus_config)(struct sdw_slave *slave,
639 			  struct sdw_bus_params *params);
640 	int (*port_prep)(struct sdw_slave *slave,
641 			 struct sdw_prepare_ch *prepare_ch,
642 			 enum sdw_port_prep_ops pre_ops);
643 	int (*clk_stop)(struct sdw_slave *slave,
644 			enum sdw_clk_stop_mode mode,
645 			enum sdw_clk_stop_type type);
646 
647 };
648 
649 /**
650  * struct sdw_slave - SoundWire Slave
651  * @id: MIPI device ID
652  * @dev: Linux device
653  * @irq: IRQ number
654  * @status: Status reported by the Slave
655  * @bus: Bus handle
656  * @prop: Slave properties
657  * @debugfs: Slave debugfs
658  * @node: node for bus list
659  * @port_ready: Port ready completion flag for each Slave port
660  * @m_port_map: static Master port map for each Slave port
661  * @dev_num: Current Device Number, values can be 0 or dev_num_sticky
662  * @dev_num_sticky: one-time static Device Number assigned by Bus
663  * @probed: boolean tracking driver state
664  * @enumeration_complete: completion utility to control potential races
665  * on startup between device enumeration and read/write access to the
666  * Slave device
667  * @initialization_complete: completion utility to control potential races
668  * on startup between device enumeration and settings being restored
669  * @unattach_request: mask field to keep track why the Slave re-attached and
670  * was re-initialized. This is useful to deal with potential race conditions
671  * between the Master suspending and the codec resuming, and make sure that
672  * when the Master triggered a reset the Slave is properly enumerated and
673  * initialized
674  * @first_interrupt_done: status flag tracking if the interrupt handling
675  * for a Slave happens for the first time after enumeration
676  * @is_mockup_device: status flag used to squelch errors in the command/control
677  * protocol for SoundWire mockup devices
678  * @sdw_dev_lock: mutex used to protect callbacks/remove races
679  */
680 struct sdw_slave {
681 	struct sdw_slave_id id;
682 	struct device dev;
683 	int irq;
684 	enum sdw_slave_status status;
685 	struct sdw_bus *bus;
686 	struct sdw_slave_prop prop;
687 #ifdef CONFIG_DEBUG_FS
688 	struct dentry *debugfs;
689 #endif
690 	struct list_head node;
691 	struct completion port_ready[SDW_MAX_PORTS];
692 	unsigned int m_port_map[SDW_MAX_PORTS];
693 	u16 dev_num;
694 	u16 dev_num_sticky;
695 	bool probed;
696 	struct completion enumeration_complete;
697 	struct completion initialization_complete;
698 	u32 unattach_request;
699 	bool first_interrupt_done;
700 	bool is_mockup_device;
701 	struct mutex sdw_dev_lock; /* protect callbacks/remove races */
702 };
703 
704 #define dev_to_sdw_dev(_dev) container_of(_dev, struct sdw_slave, dev)
705 
706 /**
707  * struct sdw_master_device - SoundWire 'Master Device' representation
708  * @dev: Linux device for this Master
709  * @bus: Bus handle shortcut
710  */
711 struct sdw_master_device {
712 	struct device dev;
713 	struct sdw_bus *bus;
714 };
715 
716 #define dev_to_sdw_master_device(d)	\
717 	container_of(d, struct sdw_master_device, dev)
718 
719 struct sdw_driver {
720 	const char *name;
721 
722 	int (*probe)(struct sdw_slave *sdw,
723 			const struct sdw_device_id *id);
724 	int (*remove)(struct sdw_slave *sdw);
725 	void (*shutdown)(struct sdw_slave *sdw);
726 
727 	const struct sdw_device_id *id_table;
728 	const struct sdw_slave_ops *ops;
729 
730 	struct device_driver driver;
731 };
732 
733 #define SDW_SLAVE_ENTRY_EXT(_mfg_id, _part_id, _version, _c_id, _drv_data) \
734 	{ .mfg_id = (_mfg_id), .part_id = (_part_id),		\
735 	  .sdw_version = (_version), .class_id = (_c_id),	\
736 	  .driver_data = (unsigned long)(_drv_data) }
737 
738 #define SDW_SLAVE_ENTRY(_mfg_id, _part_id, _drv_data)	\
739 	SDW_SLAVE_ENTRY_EXT((_mfg_id), (_part_id), 0, 0, (_drv_data))
740 
741 int sdw_handle_slave_status(struct sdw_bus *bus,
742 			enum sdw_slave_status status[]);
743 
744 /*
745  * SDW master structures and APIs
746  */
747 
748 /**
749  * struct sdw_port_params: Data Port parameters
750  *
751  * @num: Port number
752  * @bps: Word length of the Port
753  * @flow_mode: Port Data flow mode
754  * @data_mode: Test modes or normal mode
755  *
756  * This is used to program the Data Port based on Data Port stream
757  * parameters.
758  */
759 struct sdw_port_params {
760 	unsigned int num;
761 	unsigned int bps;
762 	unsigned int flow_mode;
763 	unsigned int data_mode;
764 };
765 
766 /**
767  * struct sdw_transport_params: Data Port Transport Parameters
768  *
769  * @blk_grp_ctrl_valid: Port implements block group control
770  * @num: Port number
771  * @blk_grp_ctrl: Block group control value
772  * @sample_interval: Sample interval
773  * @offset1: Blockoffset of the payload data
774  * @offset2: Blockoffset of the payload data
775  * @hstart: Horizontal start of the payload data
776  * @hstop: Horizontal stop of the payload data
777  * @blk_pkg_mode: Block per channel or block per port
778  * @lane_ctrl: Data lane Port uses for Data transfer. Currently only single
779  * data lane is supported in bus
780  *
781  * This is used to program the Data Port based on Data Port transport
782  * parameters. All these parameters are banked and can be modified
783  * during a bank switch without any artifacts in audio stream.
784  */
785 struct sdw_transport_params {
786 	bool blk_grp_ctrl_valid;
787 	unsigned int port_num;
788 	unsigned int blk_grp_ctrl;
789 	unsigned int sample_interval;
790 	unsigned int offset1;
791 	unsigned int offset2;
792 	unsigned int hstart;
793 	unsigned int hstop;
794 	unsigned int blk_pkg_mode;
795 	unsigned int lane_ctrl;
796 };
797 
798 /**
799  * struct sdw_enable_ch: Enable/disable Data Port channel
800  *
801  * @num: Port number
802  * @ch_mask: Active channel mask
803  * @enable: Enable (true) /disable (false) channel
804  */
805 struct sdw_enable_ch {
806 	unsigned int port_num;
807 	unsigned int ch_mask;
808 	bool enable;
809 };
810 
811 /**
812  * struct sdw_master_port_ops: Callback functions from bus to Master
813  * driver to set Master Data ports.
814  *
815  * @dpn_set_port_params: Set the Port parameters for the Master Port.
816  * Mandatory callback
817  * @dpn_set_port_transport_params: Set transport parameters for the Master
818  * Port. Mandatory callback
819  * @dpn_port_prep: Port prepare operations for the Master Data Port.
820  * @dpn_port_enable_ch: Enable the channels of Master Port.
821  */
822 struct sdw_master_port_ops {
823 	int (*dpn_set_port_params)(struct sdw_bus *bus,
824 			struct sdw_port_params *port_params,
825 			unsigned int bank);
826 	int (*dpn_set_port_transport_params)(struct sdw_bus *bus,
827 			struct sdw_transport_params *transport_params,
828 			enum sdw_reg_bank bank);
829 	int (*dpn_port_prep)(struct sdw_bus *bus,
830 			struct sdw_prepare_ch *prepare_ch);
831 	int (*dpn_port_enable_ch)(struct sdw_bus *bus,
832 			struct sdw_enable_ch *enable_ch, unsigned int bank);
833 };
834 
835 struct sdw_msg;
836 
837 /**
838  * struct sdw_defer - SDW deffered message
839  * @length: message length
840  * @complete: message completion
841  * @msg: SDW message
842  */
843 struct sdw_defer {
844 	int length;
845 	struct completion complete;
846 	struct sdw_msg *msg;
847 };
848 
849 /**
850  * struct sdw_master_ops - Master driver ops
851  * @read_prop: Read Master properties
852  * @override_adr: Override value read from firmware (quirk for buggy firmware)
853  * @xfer_msg: Transfer message callback
854  * @xfer_msg_defer: Defer version of transfer message callback. The message is handled with the
855  * bus struct @sdw_defer
856  * @set_bus_conf: Set the bus configuration
857  * @pre_bank_switch: Callback for pre bank switch
858  * @post_bank_switch: Callback for post bank switch
859  * @read_ping_status: Read status from PING frames, reported with two bits per Device.
860  * Bits 31:24 are reserved.
861  * @get_device_num: Callback for vendor-specific device_number allocation
862  * @put_device_num: Callback for vendor-specific device_number release
863  * @new_peripheral_assigned: Callback to handle enumeration of new peripheral.
864  */
865 struct sdw_master_ops {
866 	int (*read_prop)(struct sdw_bus *bus);
867 	u64 (*override_adr)
868 			(struct sdw_bus *bus, u64 addr);
869 	enum sdw_command_response (*xfer_msg)
870 			(struct sdw_bus *bus, struct sdw_msg *msg);
871 	enum sdw_command_response (*xfer_msg_defer)
872 			(struct sdw_bus *bus);
873 	int (*set_bus_conf)(struct sdw_bus *bus,
874 			struct sdw_bus_params *params);
875 	int (*pre_bank_switch)(struct sdw_bus *bus);
876 	int (*post_bank_switch)(struct sdw_bus *bus);
877 	u32 (*read_ping_status)(struct sdw_bus *bus);
878 	int (*get_device_num)(struct sdw_bus *bus, struct sdw_slave *slave);
879 	void (*put_device_num)(struct sdw_bus *bus, struct sdw_slave *slave);
880 	void (*new_peripheral_assigned)(struct sdw_bus *bus,
881 					struct sdw_slave *slave,
882 					int dev_num);
883 };
884 
885 /**
886  * struct sdw_bus - SoundWire bus
887  * @dev: Shortcut to &bus->md->dev to avoid changing the entire code.
888  * @md: Master device
889  * @controller_id: system-unique controller ID. If set to -1, the bus @id will be used.
890  * @link_id: Link id number, can be 0 to N, unique for each Controller
891  * @id: bus system-wide unique id
892  * @slaves: list of Slaves on this bus
893  * @assigned: Bitmap for Slave device numbers.
894  * Bit set implies used number, bit clear implies unused number.
895  * @bus_lock: bus lock
896  * @msg_lock: message lock
897  * @compute_params: points to Bus resource management implementation
898  * @ops: Master callback ops
899  * @port_ops: Master port callback ops
900  * @params: Current bus parameters
901  * @prop: Master properties
902  * @m_rt_list: List of Master instance of all stream(s) running on Bus. This
903  * is used to compute and program bus bandwidth, clock, frame shape,
904  * transport and port parameters
905  * @debugfs: Bus debugfs
906  * @domain: IRQ domain
907  * @defer_msg: Defer message
908  * @clk_stop_timeout: Clock stop timeout computed
909  * @bank_switch_timeout: Bank switch timeout computed
910  * @multi_link: Store bus property that indicates if multi links
911  * are supported. This flag is populated by drivers after reading
912  * appropriate firmware (ACPI/DT).
913  * @hw_sync_min_links: Number of links used by a stream above which
914  * hardware-based synchronization is required. This value is only
915  * meaningful if multi_link is set. If set to 1, hardware-based
916  * synchronization will be used even if a stream only uses a single
917  * SoundWire segment.
918  */
919 struct sdw_bus {
920 	struct device *dev;
921 	struct sdw_master_device *md;
922 	int controller_id;
923 	unsigned int link_id;
924 	int id;
925 	struct list_head slaves;
926 	DECLARE_BITMAP(assigned, SDW_MAX_DEVICES);
927 	struct mutex bus_lock;
928 	struct lock_class_key bus_lock_key;
929 	struct mutex msg_lock;
930 	struct lock_class_key msg_lock_key;
931 	int (*compute_params)(struct sdw_bus *bus);
932 	const struct sdw_master_ops *ops;
933 	const struct sdw_master_port_ops *port_ops;
934 	struct sdw_bus_params params;
935 	struct sdw_master_prop prop;
936 	struct list_head m_rt_list;
937 #ifdef CONFIG_DEBUG_FS
938 	struct dentry *debugfs;
939 #endif
940 	struct irq_chip irq_chip;
941 	struct irq_domain *domain;
942 	struct sdw_defer defer_msg;
943 	unsigned int clk_stop_timeout;
944 	u32 bank_switch_timeout;
945 	bool multi_link;
946 	int hw_sync_min_links;
947 };
948 
949 int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
950 		       struct fwnode_handle *fwnode);
951 void sdw_bus_master_delete(struct sdw_bus *bus);
952 
953 void sdw_show_ping_status(struct sdw_bus *bus, bool sync_delay);
954 
955 /**
956  * sdw_port_config: Master or Slave Port configuration
957  *
958  * @num: Port number
959  * @ch_mask: channels mask for port
960  */
961 struct sdw_port_config {
962 	unsigned int num;
963 	unsigned int ch_mask;
964 };
965 
966 /**
967  * sdw_stream_config: Master or Slave stream configuration
968  *
969  * @frame_rate: Audio frame rate of the stream, in Hz
970  * @ch_count: Channel count of the stream
971  * @bps: Number of bits per audio sample
972  * @direction: Data direction
973  * @type: Stream type PCM or PDM
974  */
975 struct sdw_stream_config {
976 	unsigned int frame_rate;
977 	unsigned int ch_count;
978 	unsigned int bps;
979 	enum sdw_data_direction direction;
980 	enum sdw_stream_type type;
981 };
982 
983 /**
984  * sdw_stream_state: Stream states
985  *
986  * @SDW_STREAM_ALLOCATED: New stream allocated.
987  * @SDW_STREAM_CONFIGURED: Stream configured
988  * @SDW_STREAM_PREPARED: Stream prepared
989  * @SDW_STREAM_ENABLED: Stream enabled
990  * @SDW_STREAM_DISABLED: Stream disabled
991  * @SDW_STREAM_DEPREPARED: Stream de-prepared
992  * @SDW_STREAM_RELEASED: Stream released
993  */
994 enum sdw_stream_state {
995 	SDW_STREAM_ALLOCATED = 0,
996 	SDW_STREAM_CONFIGURED = 1,
997 	SDW_STREAM_PREPARED = 2,
998 	SDW_STREAM_ENABLED = 3,
999 	SDW_STREAM_DISABLED = 4,
1000 	SDW_STREAM_DEPREPARED = 5,
1001 	SDW_STREAM_RELEASED = 6,
1002 };
1003 
1004 /**
1005  * sdw_stream_params: Stream parameters
1006  *
1007  * @rate: Sampling frequency, in Hz
1008  * @ch_count: Number of channels
1009  * @bps: bits per channel sample
1010  */
1011 struct sdw_stream_params {
1012 	unsigned int rate;
1013 	unsigned int ch_count;
1014 	unsigned int bps;
1015 };
1016 
1017 /**
1018  * sdw_stream_runtime: Runtime stream parameters
1019  *
1020  * @name: SoundWire stream name
1021  * @params: Stream parameters
1022  * @state: Current state of the stream
1023  * @type: Stream type PCM or PDM
1024  * @master_list: List of Master runtime(s) in this stream.
1025  * master_list can contain only one m_rt per Master instance
1026  * for a stream
1027  * @m_rt_count: Count of Master runtime(s) in this stream
1028  */
1029 struct sdw_stream_runtime {
1030 	const char *name;
1031 	struct sdw_stream_params params;
1032 	enum sdw_stream_state state;
1033 	enum sdw_stream_type type;
1034 	struct list_head master_list;
1035 	int m_rt_count;
1036 };
1037 
1038 struct sdw_stream_runtime *sdw_alloc_stream(const char *stream_name);
1039 void sdw_release_stream(struct sdw_stream_runtime *stream);
1040 
1041 int sdw_compute_params(struct sdw_bus *bus);
1042 
1043 int sdw_stream_add_master(struct sdw_bus *bus,
1044 		struct sdw_stream_config *stream_config,
1045 		struct sdw_port_config *port_config,
1046 		unsigned int num_ports,
1047 		struct sdw_stream_runtime *stream);
1048 int sdw_stream_remove_master(struct sdw_bus *bus,
1049 		struct sdw_stream_runtime *stream);
1050 int sdw_startup_stream(void *sdw_substream);
1051 int sdw_prepare_stream(struct sdw_stream_runtime *stream);
1052 int sdw_enable_stream(struct sdw_stream_runtime *stream);
1053 int sdw_disable_stream(struct sdw_stream_runtime *stream);
1054 int sdw_deprepare_stream(struct sdw_stream_runtime *stream);
1055 void sdw_shutdown_stream(void *sdw_substream);
1056 int sdw_bus_prep_clk_stop(struct sdw_bus *bus);
1057 int sdw_bus_clk_stop(struct sdw_bus *bus);
1058 int sdw_bus_exit_clk_stop(struct sdw_bus *bus);
1059 
1060 int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id);
1061 void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id);
1062 
1063 #if IS_ENABLED(CONFIG_SOUNDWIRE)
1064 
1065 int sdw_stream_add_slave(struct sdw_slave *slave,
1066 			 struct sdw_stream_config *stream_config,
1067 			 struct sdw_port_config *port_config,
1068 			 unsigned int num_ports,
1069 			 struct sdw_stream_runtime *stream);
1070 int sdw_stream_remove_slave(struct sdw_slave *slave,
1071 			    struct sdw_stream_runtime *stream);
1072 
1073 /* messaging and data APIs */
1074 int sdw_read(struct sdw_slave *slave, u32 addr);
1075 int sdw_write(struct sdw_slave *slave, u32 addr, u8 value);
1076 int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value);
1077 int sdw_read_no_pm(struct sdw_slave *slave, u32 addr);
1078 int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
1079 int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
1080 int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val);
1081 int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val);
1082 int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
1083 int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
1084 
1085 #else
1086 
sdw_stream_add_slave(struct sdw_slave * slave,struct sdw_stream_config * stream_config,struct sdw_port_config * port_config,unsigned int num_ports,struct sdw_stream_runtime * stream)1087 static inline int sdw_stream_add_slave(struct sdw_slave *slave,
1088 				       struct sdw_stream_config *stream_config,
1089 				       struct sdw_port_config *port_config,
1090 				       unsigned int num_ports,
1091 				       struct sdw_stream_runtime *stream)
1092 {
1093 	WARN_ONCE(1, "SoundWire API is disabled");
1094 	return -EINVAL;
1095 }
1096 
sdw_stream_remove_slave(struct sdw_slave * slave,struct sdw_stream_runtime * stream)1097 static inline int sdw_stream_remove_slave(struct sdw_slave *slave,
1098 					  struct sdw_stream_runtime *stream)
1099 {
1100 	WARN_ONCE(1, "SoundWire API is disabled");
1101 	return -EINVAL;
1102 }
1103 
1104 /* messaging and data APIs */
sdw_read(struct sdw_slave * slave,u32 addr)1105 static inline int sdw_read(struct sdw_slave *slave, u32 addr)
1106 {
1107 	WARN_ONCE(1, "SoundWire API is disabled");
1108 	return -EINVAL;
1109 }
1110 
sdw_write(struct sdw_slave * slave,u32 addr,u8 value)1111 static inline int sdw_write(struct sdw_slave *slave, u32 addr, u8 value)
1112 {
1113 	WARN_ONCE(1, "SoundWire API is disabled");
1114 	return -EINVAL;
1115 }
1116 
sdw_write_no_pm(struct sdw_slave * slave,u32 addr,u8 value)1117 static inline int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value)
1118 {
1119 	WARN_ONCE(1, "SoundWire API is disabled");
1120 	return -EINVAL;
1121 }
1122 
sdw_read_no_pm(struct sdw_slave * slave,u32 addr)1123 static inline int sdw_read_no_pm(struct sdw_slave *slave, u32 addr)
1124 {
1125 	WARN_ONCE(1, "SoundWire API is disabled");
1126 	return -EINVAL;
1127 }
1128 
sdw_nread(struct sdw_slave * slave,u32 addr,size_t count,u8 * val)1129 static inline int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
1130 {
1131 	WARN_ONCE(1, "SoundWire API is disabled");
1132 	return -EINVAL;
1133 }
1134 
sdw_nread_no_pm(struct sdw_slave * slave,u32 addr,size_t count,u8 * val)1135 static inline int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
1136 {
1137 	WARN_ONCE(1, "SoundWire API is disabled");
1138 	return -EINVAL;
1139 }
1140 
sdw_nwrite(struct sdw_slave * slave,u32 addr,size_t count,const u8 * val)1141 static inline int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
1142 {
1143 	WARN_ONCE(1, "SoundWire API is disabled");
1144 	return -EINVAL;
1145 }
1146 
sdw_nwrite_no_pm(struct sdw_slave * slave,u32 addr,size_t count,const u8 * val)1147 static inline int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
1148 {
1149 	WARN_ONCE(1, "SoundWire API is disabled");
1150 	return -EINVAL;
1151 }
1152 
sdw_update(struct sdw_slave * slave,u32 addr,u8 mask,u8 val)1153 static inline int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
1154 {
1155 	WARN_ONCE(1, "SoundWire API is disabled");
1156 	return -EINVAL;
1157 }
1158 
sdw_update_no_pm(struct sdw_slave * slave,u32 addr,u8 mask,u8 val)1159 static inline int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
1160 {
1161 	WARN_ONCE(1, "SoundWire API is disabled");
1162 	return -EINVAL;
1163 }
1164 
1165 #endif /* CONFIG_SOUNDWIRE */
1166 
1167 #endif /* __SOUNDWIRE_H */
1168