1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Renesas USB driver R-Car Gen. 3 initialization and power control
4  *
5  * Copyright (C) 2016-2019 Renesas Electronics Corporation
6  */
7 
8 #include <linux/delay.h>
9 #include <linux/io.h>
10 #include "common.h"
11 #include "rcar3.h"
12 
13 #define LPSTS		0x102
14 #define UGCTRL		0x180	/* 32-bit register */
15 #define UGCTRL2		0x184	/* 32-bit register */
16 #define UGSTS		0x188	/* 32-bit register */
17 
18 /* Low Power Status register (LPSTS) */
19 #define LPSTS_SUSPM	0x4000
20 
21 /* R-Car D3 only: USB General control register (UGCTRL) */
22 #define UGCTRL_PLLRESET		0x00000001
23 #define UGCTRL_CONNECT		0x00000004
24 
25 /*
26  * USB General control register 2 (UGCTRL2)
27  * Remarks: bit[31:11] and bit[9:6] should be 0
28  */
29 #define UGCTRL2_RESERVED_3	0x00000001	/* bit[3:0] should be B'0001 */
30 #define UGCTRL2_USB0SEL_HSUSB	0x00000020
31 #define UGCTRL2_USB0SEL_OTG	0x00000030
32 #define UGCTRL2_VBUSSEL		0x00000400
33 
34 /* R-Car D3 only: USB General status register (UGSTS) */
35 #define UGSTS_LOCK		0x00000100
36 
usbhs_write32(struct usbhs_priv * priv,u32 reg,u32 data)37 static void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data)
38 {
39 	iowrite32(data, priv->base + reg);
40 }
41 
usbhs_read32(struct usbhs_priv * priv,u32 reg)42 static u32 usbhs_read32(struct usbhs_priv *priv, u32 reg)
43 {
44 	return ioread32(priv->base + reg);
45 }
46 
usbhs_rcar3_set_ugctrl2(struct usbhs_priv * priv,u32 val)47 static void usbhs_rcar3_set_ugctrl2(struct usbhs_priv *priv, u32 val)
48 {
49 	usbhs_write32(priv, UGCTRL2, val | UGCTRL2_RESERVED_3);
50 }
51 
usbhs_rcar3_power_ctrl(struct platform_device * pdev,void __iomem * base,int enable)52 static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
53 				void __iomem *base, int enable)
54 {
55 	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
56 
57 	usbhs_rcar3_set_ugctrl2(priv, UGCTRL2_USB0SEL_OTG | UGCTRL2_VBUSSEL);
58 
59 	if (enable) {
60 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
61 		/* The controller on R-Car Gen3 needs to wait up to 45 usec */
62 		usleep_range(45, 90);
63 	} else {
64 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
65 	}
66 
67 	return 0;
68 }
69 
70 /* R-Car D3 needs to release UGCTRL.PLLRESET */
usbhs_rcar3_power_and_pll_ctrl(struct platform_device * pdev,void __iomem * base,int enable)71 static int usbhs_rcar3_power_and_pll_ctrl(struct platform_device *pdev,
72 					  void __iomem *base, int enable)
73 {
74 	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
75 	u32 val;
76 	int timeout = 1000;
77 
78 	if (enable) {
79 		usbhs_write32(priv, UGCTRL, 0);	/* release PLLRESET */
80 		usbhs_rcar3_set_ugctrl2(priv,
81 					UGCTRL2_USB0SEL_OTG | UGCTRL2_VBUSSEL);
82 
83 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
84 		do {
85 			val = usbhs_read32(priv, UGSTS);
86 			udelay(1);
87 		} while (!(val & UGSTS_LOCK) && timeout--);
88 		usbhs_write32(priv, UGCTRL, UGCTRL_CONNECT);
89 	} else {
90 		usbhs_write32(priv, UGCTRL, 0);
91 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
92 		usbhs_write32(priv, UGCTRL, UGCTRL_PLLRESET);
93 	}
94 
95 	return 0;
96 }
97 
98 const struct renesas_usbhs_platform_info usbhs_rcar_gen3_plat_info = {
99 	.platform_callback = {
100 		.power_ctrl = usbhs_rcar3_power_ctrl,
101 		.get_id = usbhs_get_id_as_gadget,
102 	},
103 	.driver_param = {
104 		.has_usb_dmac = 1,
105 		.multi_clks = 1,
106 		.has_new_pipe_configs = 1,
107 	},
108 };
109 
110 const struct renesas_usbhs_platform_info usbhs_rcar_gen3_with_pll_plat_info = {
111 	.platform_callback = {
112 		.power_ctrl = usbhs_rcar3_power_and_pll_ctrl,
113 		.get_id = usbhs_get_id_as_gadget,
114 	},
115 	.driver_param = {
116 		.has_usb_dmac = 1,
117 		.multi_clks = 1,
118 		.has_new_pipe_configs = 1,
119 	},
120 };
121