1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Broadcom UniMAC MDIO bus controller driver
4 *
5 * Copyright (C) 2014-2017 Broadcom
6 */
7
8 #include <linux/clk.h>
9 #include <linux/delay.h>
10 #include <linux/io.h>
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/of_mdio.h>
15 #include <linux/of_platform.h>
16 #include <linux/phy.h>
17 #include <linux/platform_data/mdio-bcm-unimac.h>
18 #include <linux/platform_device.h>
19 #include <linux/sched.h>
20
21 #define MDIO_CMD 0x00
22 #define MDIO_START_BUSY (1 << 29)
23 #define MDIO_READ_FAIL (1 << 28)
24 #define MDIO_RD (2 << 26)
25 #define MDIO_WR (1 << 26)
26 #define MDIO_PMD_SHIFT 21
27 #define MDIO_PMD_MASK 0x1F
28 #define MDIO_REG_SHIFT 16
29 #define MDIO_REG_MASK 0x1F
30
31 #define MDIO_CFG 0x04
32 #define MDIO_C22 (1 << 0)
33 #define MDIO_C45 0
34 #define MDIO_CLK_DIV_SHIFT 4
35 #define MDIO_CLK_DIV_MASK 0x3F
36 #define MDIO_SUPP_PREAMBLE (1 << 12)
37
38 struct unimac_mdio_priv {
39 struct mii_bus *mii_bus;
40 void __iomem *base;
41 int (*wait_func) (void *wait_func_data);
42 void *wait_func_data;
43 struct clk *clk;
44 u32 clk_freq;
45 };
46
unimac_mdio_readl(struct unimac_mdio_priv * priv,u32 offset)47 static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset)
48 {
49 /* MIPS chips strapped for BE will automagically configure the
50 * peripheral registers for CPU-native byte order.
51 */
52 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
53 return __raw_readl(priv->base + offset);
54 else
55 return readl_relaxed(priv->base + offset);
56 }
57
unimac_mdio_writel(struct unimac_mdio_priv * priv,u32 val,u32 offset)58 static inline void unimac_mdio_writel(struct unimac_mdio_priv *priv, u32 val,
59 u32 offset)
60 {
61 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
62 __raw_writel(val, priv->base + offset);
63 else
64 writel_relaxed(val, priv->base + offset);
65 }
66
unimac_mdio_start(struct unimac_mdio_priv * priv)67 static inline void unimac_mdio_start(struct unimac_mdio_priv *priv)
68 {
69 u32 reg;
70
71 reg = unimac_mdio_readl(priv, MDIO_CMD);
72 reg |= MDIO_START_BUSY;
73 unimac_mdio_writel(priv, reg, MDIO_CMD);
74 }
75
unimac_mdio_busy(struct unimac_mdio_priv * priv)76 static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv)
77 {
78 return unimac_mdio_readl(priv, MDIO_CMD) & MDIO_START_BUSY;
79 }
80
unimac_mdio_poll(void * wait_func_data)81 static int unimac_mdio_poll(void *wait_func_data)
82 {
83 struct unimac_mdio_priv *priv = wait_func_data;
84 unsigned int timeout = 1000;
85
86 do {
87 if (!unimac_mdio_busy(priv))
88 return 0;
89
90 usleep_range(1000, 2000);
91 } while (--timeout);
92
93 return -ETIMEDOUT;
94 }
95
unimac_mdio_read(struct mii_bus * bus,int phy_id,int reg)96 static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
97 {
98 struct unimac_mdio_priv *priv = bus->priv;
99 int ret;
100 u32 cmd;
101
102 /* Prepare the read operation */
103 cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT);
104 unimac_mdio_writel(priv, cmd, MDIO_CMD);
105
106 /* Start MDIO transaction */
107 unimac_mdio_start(priv);
108
109 ret = priv->wait_func(priv->wait_func_data);
110 if (ret)
111 return ret;
112
113 cmd = unimac_mdio_readl(priv, MDIO_CMD);
114
115 /* Some broken devices are known not to release the line during
116 * turn-around, e.g: Broadcom BCM53125 external switches, so check for
117 * that condition here and ignore the MDIO controller read failure
118 * indication.
119 */
120 if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL))
121 return -EIO;
122
123 return cmd & 0xffff;
124 }
125
unimac_mdio_write(struct mii_bus * bus,int phy_id,int reg,u16 val)126 static int unimac_mdio_write(struct mii_bus *bus, int phy_id,
127 int reg, u16 val)
128 {
129 struct unimac_mdio_priv *priv = bus->priv;
130 u32 cmd;
131
132 /* Prepare the write operation */
133 cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) |
134 (reg << MDIO_REG_SHIFT) | (0xffff & val);
135 unimac_mdio_writel(priv, cmd, MDIO_CMD);
136
137 unimac_mdio_start(priv);
138
139 return priv->wait_func(priv->wait_func_data);
140 }
141
142 /* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with
143 * their internal MDIO management controller making them fail to successfully
144 * be read from or written to for the first transaction. We insert a dummy
145 * BMSR read here to make sure that phy_get_device() and get_phy_id() can
146 * correctly read the PHY MII_PHYSID1/2 registers and successfully register a
147 * PHY device for this peripheral.
148 *
149 * Once the PHY driver is registered, we can workaround subsequent reads from
150 * there (e.g: during system-wide power management).
151 *
152 * bus->reset is invoked before mdiobus_scan during mdiobus_register and is
153 * therefore the right location to stick that workaround. Since we do not want
154 * to read from non-existing PHYs, we either use bus->phy_mask or do a manual
155 * Device Tree scan to limit the search area.
156 */
unimac_mdio_reset(struct mii_bus * bus)157 static int unimac_mdio_reset(struct mii_bus *bus)
158 {
159 struct device_node *np = bus->dev.of_node;
160 struct device_node *child;
161 u32 read_mask = 0;
162 int addr;
163
164 if (!np) {
165 read_mask = ~bus->phy_mask;
166 } else {
167 for_each_available_child_of_node(np, child) {
168 addr = of_mdio_parse_addr(&bus->dev, child);
169 if (addr < 0)
170 continue;
171
172 read_mask |= 1 << addr;
173 }
174 }
175
176 for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
177 if (read_mask & 1 << addr) {
178 dev_dbg(&bus->dev, "Workaround for PHY @ %d\n", addr);
179 mdiobus_read(bus, addr, MII_BMSR);
180 }
181 }
182
183 return 0;
184 }
185
unimac_mdio_clk_set(struct unimac_mdio_priv * priv)186 static void unimac_mdio_clk_set(struct unimac_mdio_priv *priv)
187 {
188 unsigned long rate;
189 u32 reg, div;
190
191 /* Keep the hardware default values */
192 if (!priv->clk_freq)
193 return;
194
195 if (!priv->clk)
196 rate = 250000000;
197 else
198 rate = clk_get_rate(priv->clk);
199
200 div = (rate / (2 * priv->clk_freq)) - 1;
201 if (div & ~MDIO_CLK_DIV_MASK) {
202 pr_warn("Incorrect MDIO clock frequency, ignoring\n");
203 return;
204 }
205
206 /* The MDIO clock is the reference clock (typically 250Mhz) divided by
207 * 2 x (MDIO_CLK_DIV + 1)
208 */
209 reg = unimac_mdio_readl(priv, MDIO_CFG);
210 reg &= ~(MDIO_CLK_DIV_MASK << MDIO_CLK_DIV_SHIFT);
211 reg |= div << MDIO_CLK_DIV_SHIFT;
212 unimac_mdio_writel(priv, reg, MDIO_CFG);
213 }
214
unimac_mdio_probe(struct platform_device * pdev)215 static int unimac_mdio_probe(struct platform_device *pdev)
216 {
217 struct unimac_mdio_pdata *pdata = pdev->dev.platform_data;
218 struct unimac_mdio_priv *priv;
219 struct device_node *np;
220 struct mii_bus *bus;
221 struct resource *r;
222 int ret;
223
224 np = pdev->dev.of_node;
225
226 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
227 if (!priv)
228 return -ENOMEM;
229
230 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
231 if (!r)
232 return -EINVAL;
233
234 /* Just ioremap, as this MDIO block is usually integrated into an
235 * Ethernet MAC controller register range
236 */
237 priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
238 if (!priv->base) {
239 dev_err(&pdev->dev, "failed to remap register\n");
240 return -ENOMEM;
241 }
242
243 priv->clk = devm_clk_get_optional(&pdev->dev, NULL);
244 if (IS_ERR(priv->clk))
245 return PTR_ERR(priv->clk);
246
247 ret = clk_prepare_enable(priv->clk);
248 if (ret)
249 return ret;
250
251 if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq))
252 priv->clk_freq = 0;
253
254 unimac_mdio_clk_set(priv);
255
256 priv->mii_bus = mdiobus_alloc();
257 if (!priv->mii_bus) {
258 ret = -ENOMEM;
259 goto out_clk_disable;
260 }
261
262 bus = priv->mii_bus;
263 bus->priv = priv;
264 if (pdata) {
265 bus->name = pdata->bus_name;
266 priv->wait_func = pdata->wait_func;
267 priv->wait_func_data = pdata->wait_func_data;
268 bus->phy_mask = ~pdata->phy_mask;
269 } else {
270 bus->name = "unimac MII bus";
271 priv->wait_func_data = priv;
272 priv->wait_func = unimac_mdio_poll;
273 }
274 bus->parent = &pdev->dev;
275 bus->read = unimac_mdio_read;
276 bus->write = unimac_mdio_write;
277 bus->reset = unimac_mdio_reset;
278 snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
279
280 ret = of_mdiobus_register(bus, np);
281 if (ret) {
282 dev_err(&pdev->dev, "MDIO bus registration failed\n");
283 goto out_mdio_free;
284 }
285
286 platform_set_drvdata(pdev, priv);
287
288 dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus\n");
289
290 return 0;
291
292 out_mdio_free:
293 mdiobus_free(bus);
294 out_clk_disable:
295 clk_disable_unprepare(priv->clk);
296 return ret;
297 }
298
unimac_mdio_remove(struct platform_device * pdev)299 static int unimac_mdio_remove(struct platform_device *pdev)
300 {
301 struct unimac_mdio_priv *priv = platform_get_drvdata(pdev);
302
303 mdiobus_unregister(priv->mii_bus);
304 mdiobus_free(priv->mii_bus);
305 clk_disable_unprepare(priv->clk);
306
307 return 0;
308 }
309
unimac_mdio_suspend(struct device * d)310 static int __maybe_unused unimac_mdio_suspend(struct device *d)
311 {
312 struct unimac_mdio_priv *priv = dev_get_drvdata(d);
313
314 clk_disable_unprepare(priv->clk);
315
316 return 0;
317 }
318
unimac_mdio_resume(struct device * d)319 static int __maybe_unused unimac_mdio_resume(struct device *d)
320 {
321 struct unimac_mdio_priv *priv = dev_get_drvdata(d);
322 int ret;
323
324 ret = clk_prepare_enable(priv->clk);
325 if (ret)
326 return ret;
327
328 unimac_mdio_clk_set(priv);
329
330 return 0;
331 }
332
333 static SIMPLE_DEV_PM_OPS(unimac_mdio_pm_ops,
334 unimac_mdio_suspend, unimac_mdio_resume);
335
336 static const struct of_device_id unimac_mdio_ids[] = {
337 { .compatible = "brcm,asp-v2.1-mdio", },
338 { .compatible = "brcm,asp-v2.0-mdio", },
339 { .compatible = "brcm,bcm6846-mdio", },
340 { .compatible = "brcm,genet-mdio-v5", },
341 { .compatible = "brcm,genet-mdio-v4", },
342 { .compatible = "brcm,genet-mdio-v3", },
343 { .compatible = "brcm,genet-mdio-v2", },
344 { .compatible = "brcm,genet-mdio-v1", },
345 { .compatible = "brcm,unimac-mdio", },
346 { /* sentinel */ },
347 };
348 MODULE_DEVICE_TABLE(of, unimac_mdio_ids);
349
350 static struct platform_driver unimac_mdio_driver = {
351 .driver = {
352 .name = UNIMAC_MDIO_DRV_NAME,
353 .of_match_table = unimac_mdio_ids,
354 .pm = &unimac_mdio_pm_ops,
355 },
356 .probe = unimac_mdio_probe,
357 .remove = unimac_mdio_remove,
358 };
359 module_platform_driver(unimac_mdio_driver);
360
361 MODULE_AUTHOR("Broadcom Corporation");
362 MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller");
363 MODULE_LICENSE("GPL");
364 MODULE_ALIAS("platform:" UNIMAC_MDIO_DRV_NAME);
365