xref: /openbmc/linux/drivers/uio/uio_pdrv_genirq.c (revision 415abcdf)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/uio/uio_pdrv_genirq.c
4  *
5  * Userspace I/O platform driver with generic IRQ handling code.
6  *
7  * Copyright (C) 2008 Magnus Damm
8  *
9  * Based on uio_pdrv.c by Uwe Kleine-Koenig,
10  * Copyright (C) 2008 by Digi International Inc.
11  * All rights reserved.
12  */
13 
14 #include <linux/platform_device.h>
15 #include <linux/uio_driver.h>
16 #include <linux/spinlock.h>
17 #include <linux/bitops.h>
18 #include <linux/module.h>
19 #include <linux/interrupt.h>
20 #include <linux/stringify.h>
21 #include <linux/pm_runtime.h>
22 #include <linux/slab.h>
23 #include <linux/irq.h>
24 
25 #include <linux/of.h>
26 #include <linux/of_platform.h>
27 #include <linux/of_address.h>
28 
29 #define DRIVER_NAME "uio_pdrv_genirq"
30 
31 struct uio_pdrv_genirq_platdata {
32 	struct uio_info *uioinfo;
33 	spinlock_t lock;
34 	unsigned long flags;
35 	struct platform_device *pdev;
36 };
37 
38 /* Bits in uio_pdrv_genirq_platdata.flags */
39 enum {
40 	UIO_IRQ_DISABLED = 0,
41 };
42 
uio_pdrv_genirq_open(struct uio_info * info,struct inode * inode)43 static int uio_pdrv_genirq_open(struct uio_info *info, struct inode *inode)
44 {
45 	struct uio_pdrv_genirq_platdata *priv = info->priv;
46 
47 	/* Wait until the Runtime PM code has woken up the device */
48 	pm_runtime_get_sync(&priv->pdev->dev);
49 	return 0;
50 }
51 
uio_pdrv_genirq_release(struct uio_info * info,struct inode * inode)52 static int uio_pdrv_genirq_release(struct uio_info *info, struct inode *inode)
53 {
54 	struct uio_pdrv_genirq_platdata *priv = info->priv;
55 
56 	/* Tell the Runtime PM code that the device has become idle */
57 	pm_runtime_put_sync(&priv->pdev->dev);
58 	return 0;
59 }
60 
uio_pdrv_genirq_handler(int irq,struct uio_info * dev_info)61 static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
62 {
63 	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
64 
65 	/* Just disable the interrupt in the interrupt controller, and
66 	 * remember the state so we can allow user space to enable it later.
67 	 */
68 
69 	spin_lock(&priv->lock);
70 	if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
71 		disable_irq_nosync(irq);
72 	spin_unlock(&priv->lock);
73 
74 	return IRQ_HANDLED;
75 }
76 
uio_pdrv_genirq_irqcontrol(struct uio_info * dev_info,s32 irq_on)77 static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
78 {
79 	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
80 	unsigned long flags;
81 
82 	/* Allow user space to enable and disable the interrupt
83 	 * in the interrupt controller, but keep track of the
84 	 * state to prevent per-irq depth damage.
85 	 *
86 	 * Serialize this operation to support multiple tasks and concurrency
87 	 * with irq handler on SMP systems.
88 	 */
89 
90 	spin_lock_irqsave(&priv->lock, flags);
91 	if (irq_on) {
92 		if (__test_and_clear_bit(UIO_IRQ_DISABLED, &priv->flags))
93 			enable_irq(dev_info->irq);
94 	} else {
95 		if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
96 			disable_irq_nosync(dev_info->irq);
97 	}
98 	spin_unlock_irqrestore(&priv->lock, flags);
99 
100 	return 0;
101 }
102 
uio_pdrv_genirq_cleanup(void * data)103 static void uio_pdrv_genirq_cleanup(void *data)
104 {
105 	struct device *dev = data;
106 
107 	pm_runtime_disable(dev);
108 }
109 
uio_pdrv_genirq_probe(struct platform_device * pdev)110 static int uio_pdrv_genirq_probe(struct platform_device *pdev)
111 {
112 	struct uio_info *uioinfo = dev_get_platdata(&pdev->dev);
113 	struct device_node *node = pdev->dev.of_node;
114 	struct uio_pdrv_genirq_platdata *priv;
115 	struct uio_mem *uiomem;
116 	int ret = -EINVAL;
117 	int i;
118 
119 	if (node) {
120 		const char *name;
121 
122 		/* alloc uioinfo for one device */
123 		uioinfo = devm_kzalloc(&pdev->dev, sizeof(*uioinfo),
124 				       GFP_KERNEL);
125 		if (!uioinfo) {
126 			dev_err(&pdev->dev, "unable to kmalloc\n");
127 			return -ENOMEM;
128 		}
129 
130 		if (!of_property_read_string(node, "linux,uio-name", &name))
131 			uioinfo->name = devm_kstrdup(&pdev->dev, name, GFP_KERNEL);
132 		else
133 			uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
134 						       "%pOFn", node);
135 
136 		uioinfo->version = "devicetree";
137 		/* Multiple IRQs are not supported */
138 	}
139 
140 	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
141 		dev_err(&pdev->dev, "missing platform_data\n");
142 		return ret;
143 	}
144 
145 	if (uioinfo->handler || uioinfo->irqcontrol ||
146 	    uioinfo->irq_flags & IRQF_SHARED) {
147 		dev_err(&pdev->dev, "interrupt configuration error\n");
148 		return ret;
149 	}
150 
151 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
152 	if (!priv) {
153 		dev_err(&pdev->dev, "unable to kmalloc\n");
154 		return -ENOMEM;
155 	}
156 
157 	priv->uioinfo = uioinfo;
158 	spin_lock_init(&priv->lock);
159 	priv->flags = 0; /* interrupt is enabled to begin with */
160 	priv->pdev = pdev;
161 
162 	if (!uioinfo->irq) {
163 		ret = platform_get_irq_optional(pdev, 0);
164 		uioinfo->irq = ret;
165 		if (ret == -ENXIO)
166 			uioinfo->irq = UIO_IRQ_NONE;
167 		else if (ret == -EPROBE_DEFER)
168 			return ret;
169 		else if (ret < 0) {
170 			dev_err(&pdev->dev, "failed to get IRQ\n");
171 			return ret;
172 		}
173 	}
174 
175 	if (uioinfo->irq) {
176 		struct irq_data *irq_data = irq_get_irq_data(uioinfo->irq);
177 
178 		/*
179 		 * If a level interrupt, dont do lazy disable. Otherwise the
180 		 * irq will fire again since clearing of the actual cause, on
181 		 * device level, is done in userspace
182 		 * irqd_is_level_type() isn't used since isn't valid until
183 		 * irq is configured.
184 		 */
185 		if (irq_data &&
186 		    irqd_get_trigger_type(irq_data) & IRQ_TYPE_LEVEL_MASK) {
187 			dev_dbg(&pdev->dev, "disable lazy unmask\n");
188 			irq_set_status_flags(uioinfo->irq, IRQ_DISABLE_UNLAZY);
189 		}
190 	}
191 
192 	uiomem = &uioinfo->mem[0];
193 
194 	for (i = 0; i < pdev->num_resources; ++i) {
195 		struct resource *r = &pdev->resource[i];
196 
197 		if (r->flags != IORESOURCE_MEM)
198 			continue;
199 
200 		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
201 			dev_warn(&pdev->dev, "device has more than "
202 					__stringify(MAX_UIO_MAPS)
203 					" I/O memory resources.\n");
204 			break;
205 		}
206 
207 		uiomem->memtype = UIO_MEM_PHYS;
208 		uiomem->addr = r->start & PAGE_MASK;
209 		uiomem->offs = r->start & ~PAGE_MASK;
210 		uiomem->size = (uiomem->offs + resource_size(r)
211 				+ PAGE_SIZE - 1) & PAGE_MASK;
212 		uiomem->name = r->name;
213 		++uiomem;
214 	}
215 
216 	while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
217 		uiomem->size = 0;
218 		++uiomem;
219 	}
220 
221 	/* This driver requires no hardware specific kernel code to handle
222 	 * interrupts. Instead, the interrupt handler simply disables the
223 	 * interrupt in the interrupt controller. User space is responsible
224 	 * for performing hardware specific acknowledge and re-enabling of
225 	 * the interrupt in the interrupt controller.
226 	 *
227 	 * Interrupt sharing is not supported.
228 	 */
229 
230 	uioinfo->handler = uio_pdrv_genirq_handler;
231 	uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
232 	uioinfo->open = uio_pdrv_genirq_open;
233 	uioinfo->release = uio_pdrv_genirq_release;
234 	uioinfo->priv = priv;
235 
236 	/* Enable Runtime PM for this device:
237 	 * The device starts in suspended state to allow the hardware to be
238 	 * turned off by default. The Runtime PM bus code should power on the
239 	 * hardware and enable clocks at open().
240 	 */
241 	pm_runtime_enable(&pdev->dev);
242 
243 	ret = devm_add_action_or_reset(&pdev->dev, uio_pdrv_genirq_cleanup,
244 				       &pdev->dev);
245 	if (ret)
246 		return ret;
247 
248 	ret = devm_uio_register_device(&pdev->dev, priv->uioinfo);
249 	if (ret)
250 		dev_err(&pdev->dev, "unable to register uio device\n");
251 
252 	return ret;
253 }
254 
uio_pdrv_genirq_runtime_nop(struct device * dev)255 static int uio_pdrv_genirq_runtime_nop(struct device *dev)
256 {
257 	/* Runtime PM callback shared between ->runtime_suspend()
258 	 * and ->runtime_resume(). Simply returns success.
259 	 *
260 	 * In this driver pm_runtime_get_sync() and pm_runtime_put_sync()
261 	 * are used at open() and release() time. This allows the
262 	 * Runtime PM code to turn off power to the device while the
263 	 * device is unused, ie before open() and after release().
264 	 *
265 	 * This Runtime PM callback does not need to save or restore
266 	 * any registers since user space is responsbile for hardware
267 	 * register reinitialization after open().
268 	 */
269 	return 0;
270 }
271 
272 static const struct dev_pm_ops uio_pdrv_genirq_dev_pm_ops = {
273 	.runtime_suspend = uio_pdrv_genirq_runtime_nop,
274 	.runtime_resume = uio_pdrv_genirq_runtime_nop,
275 };
276 
277 #ifdef CONFIG_OF
278 static struct of_device_id uio_of_genirq_match[] = {
279 	{ /* This is filled with module_parm */ },
280 	{ /* Sentinel */ },
281 };
282 MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
283 module_param_string(of_id, uio_of_genirq_match[0].compatible, 128, 0);
284 MODULE_PARM_DESC(of_id, "Openfirmware id of the device to be handled by uio");
285 #endif
286 
287 static struct platform_driver uio_pdrv_genirq = {
288 	.probe = uio_pdrv_genirq_probe,
289 	.driver = {
290 		.name = DRIVER_NAME,
291 		.pm = &uio_pdrv_genirq_dev_pm_ops,
292 		.of_match_table = of_match_ptr(uio_of_genirq_match),
293 	},
294 };
295 
296 module_platform_driver(uio_pdrv_genirq);
297 
298 MODULE_AUTHOR("Magnus Damm");
299 MODULE_DESCRIPTION("Userspace I/O platform driver with generic IRQ handling");
300 MODULE_LICENSE("GPL v2");
301 MODULE_ALIAS("platform:" DRIVER_NAME);
302