xref: /openbmc/linux/drivers/uio/uio_dmem_genirq.c (revision a3fc57bc)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/uio/uio_dmem_genirq.c
4  *
5  * Userspace I/O platform driver with generic IRQ handling code.
6  *
7  * Copyright (C) 2012 Damian Hobson-Garcia
8  *
9  * Based on uio_pdrv_genirq.c by Magnus Damm
10  */
11 
12 #include <linux/platform_device.h>
13 #include <linux/uio_driver.h>
14 #include <linux/spinlock.h>
15 #include <linux/bitops.h>
16 #include <linux/module.h>
17 #include <linux/interrupt.h>
18 #include <linux/platform_data/uio_dmem_genirq.h>
19 #include <linux/stringify.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/dma-mapping.h>
22 #include <linux/slab.h>
23 #include <linux/irq.h>
24 
25 #include <linux/of.h>
26 #include <linux/of_platform.h>
27 #include <linux/of_address.h>
28 
29 #define DRIVER_NAME "uio_dmem_genirq"
30 #define DMEM_MAP_ERROR (~0)
31 
32 struct uio_dmem_genirq_platdata {
33 	struct uio_info *uioinfo;
34 	spinlock_t lock;
35 	unsigned long flags;
36 	struct platform_device *pdev;
37 	unsigned int dmem_region_start;
38 	unsigned int num_dmem_regions;
39 	void *dmem_region_vaddr[MAX_UIO_MAPS];
40 	struct mutex alloc_lock;
41 	unsigned int refcnt;
42 };
43 
44 /* Bits in uio_dmem_genirq_platdata.flags */
45 enum {
46 	UIO_IRQ_DISABLED = 0,
47 };
48 
uio_dmem_genirq_open(struct uio_info * info,struct inode * inode)49 static int uio_dmem_genirq_open(struct uio_info *info, struct inode *inode)
50 {
51 	struct uio_dmem_genirq_platdata *priv = info->priv;
52 	struct uio_mem *uiomem;
53 	int dmem_region = priv->dmem_region_start;
54 
55 	uiomem = &priv->uioinfo->mem[priv->dmem_region_start];
56 
57 	mutex_lock(&priv->alloc_lock);
58 	while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) {
59 		void *addr;
60 		if (!uiomem->size)
61 			break;
62 
63 		addr = dma_alloc_coherent(&priv->pdev->dev, uiomem->size,
64 				(dma_addr_t *)&uiomem->addr, GFP_KERNEL);
65 		if (!addr) {
66 			uiomem->addr = DMEM_MAP_ERROR;
67 		}
68 		priv->dmem_region_vaddr[dmem_region++] = addr;
69 		++uiomem;
70 	}
71 	priv->refcnt++;
72 
73 	mutex_unlock(&priv->alloc_lock);
74 	/* Wait until the Runtime PM code has woken up the device */
75 	pm_runtime_get_sync(&priv->pdev->dev);
76 	return 0;
77 }
78 
uio_dmem_genirq_release(struct uio_info * info,struct inode * inode)79 static int uio_dmem_genirq_release(struct uio_info *info, struct inode *inode)
80 {
81 	struct uio_dmem_genirq_platdata *priv = info->priv;
82 	struct uio_mem *uiomem;
83 	int dmem_region = priv->dmem_region_start;
84 
85 	/* Tell the Runtime PM code that the device has become idle */
86 	pm_runtime_put_sync(&priv->pdev->dev);
87 
88 	uiomem = &priv->uioinfo->mem[priv->dmem_region_start];
89 
90 	mutex_lock(&priv->alloc_lock);
91 
92 	priv->refcnt--;
93 	while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) {
94 		if (!uiomem->size)
95 			break;
96 		if (priv->dmem_region_vaddr[dmem_region]) {
97 			dma_free_coherent(&priv->pdev->dev, uiomem->size,
98 					priv->dmem_region_vaddr[dmem_region],
99 					uiomem->addr);
100 		}
101 		uiomem->addr = DMEM_MAP_ERROR;
102 		++dmem_region;
103 		++uiomem;
104 	}
105 
106 	mutex_unlock(&priv->alloc_lock);
107 	return 0;
108 }
109 
uio_dmem_genirq_handler(int irq,struct uio_info * dev_info)110 static irqreturn_t uio_dmem_genirq_handler(int irq, struct uio_info *dev_info)
111 {
112 	struct uio_dmem_genirq_platdata *priv = dev_info->priv;
113 
114 	/* Just disable the interrupt in the interrupt controller, and
115 	 * remember the state so we can allow user space to enable it later.
116 	 */
117 
118 	spin_lock(&priv->lock);
119 	if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
120 		disable_irq_nosync(irq);
121 	spin_unlock(&priv->lock);
122 
123 	return IRQ_HANDLED;
124 }
125 
uio_dmem_genirq_irqcontrol(struct uio_info * dev_info,s32 irq_on)126 static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
127 {
128 	struct uio_dmem_genirq_platdata *priv = dev_info->priv;
129 	unsigned long flags;
130 
131 	/* Allow user space to enable and disable the interrupt
132 	 * in the interrupt controller, but keep track of the
133 	 * state to prevent per-irq depth damage.
134 	 *
135 	 * Serialize this operation to support multiple tasks and concurrency
136 	 * with irq handler on SMP systems.
137 	 */
138 
139 	spin_lock_irqsave(&priv->lock, flags);
140 	if (irq_on) {
141 		if (__test_and_clear_bit(UIO_IRQ_DISABLED, &priv->flags))
142 			enable_irq(dev_info->irq);
143 	} else {
144 		if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
145 			disable_irq_nosync(dev_info->irq);
146 	}
147 	spin_unlock_irqrestore(&priv->lock, flags);
148 
149 	return 0;
150 }
151 
uio_dmem_genirq_pm_disable(void * data)152 static void uio_dmem_genirq_pm_disable(void *data)
153 {
154 	struct device *dev = data;
155 
156 	pm_runtime_disable(dev);
157 }
158 
uio_dmem_genirq_probe(struct platform_device * pdev)159 static int uio_dmem_genirq_probe(struct platform_device *pdev)
160 {
161 	struct uio_dmem_genirq_pdata *pdata = dev_get_platdata(&pdev->dev);
162 	struct uio_info *uioinfo = &pdata->uioinfo;
163 	struct uio_dmem_genirq_platdata *priv;
164 	struct uio_mem *uiomem;
165 	int ret = -EINVAL;
166 	int i;
167 
168 	if (pdev->dev.of_node) {
169 		/* alloc uioinfo for one device */
170 		uioinfo = devm_kzalloc(&pdev->dev, sizeof(*uioinfo), GFP_KERNEL);
171 		if (!uioinfo) {
172 			dev_err(&pdev->dev, "unable to kmalloc\n");
173 			return -ENOMEM;
174 		}
175 		uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOFn",
176 					       pdev->dev.of_node);
177 		uioinfo->version = "devicetree";
178 	}
179 
180 	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
181 		dev_err(&pdev->dev, "missing platform_data\n");
182 		return -EINVAL;
183 	}
184 
185 	if (uioinfo->handler || uioinfo->irqcontrol ||
186 	    uioinfo->irq_flags & IRQF_SHARED) {
187 		dev_err(&pdev->dev, "interrupt configuration error\n");
188 		return -EINVAL;
189 	}
190 
191 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
192 	if (!priv) {
193 		dev_err(&pdev->dev, "unable to kmalloc\n");
194 		return -ENOMEM;
195 	}
196 
197 	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
198 	if (ret) {
199 		dev_err(&pdev->dev, "DMA enable failed\n");
200 		return ret;
201 	}
202 
203 	priv->uioinfo = uioinfo;
204 	spin_lock_init(&priv->lock);
205 	priv->flags = 0; /* interrupt is enabled to begin with */
206 	priv->pdev = pdev;
207 	mutex_init(&priv->alloc_lock);
208 
209 	if (!uioinfo->irq) {
210 		/* Multiple IRQs are not supported */
211 		ret = platform_get_irq(pdev, 0);
212 		if (ret == -ENXIO && pdev->dev.of_node)
213 			ret = UIO_IRQ_NONE;
214 		else if (ret < 0)
215 			return ret;
216 		uioinfo->irq = ret;
217 	}
218 
219 	if (uioinfo->irq) {
220 		struct irq_data *irq_data = irq_get_irq_data(uioinfo->irq);
221 
222 		/*
223 		 * If a level interrupt, dont do lazy disable. Otherwise the
224 		 * irq will fire again since clearing of the actual cause, on
225 		 * device level, is done in userspace
226 		 * irqd_is_level_type() isn't used since isn't valid until
227 		 * irq is configured.
228 		 */
229 		if (irq_data &&
230 		    irqd_get_trigger_type(irq_data) & IRQ_TYPE_LEVEL_MASK) {
231 			dev_dbg(&pdev->dev, "disable lazy unmask\n");
232 			irq_set_status_flags(uioinfo->irq, IRQ_DISABLE_UNLAZY);
233 		}
234 	}
235 
236 	uiomem = &uioinfo->mem[0];
237 
238 	for (i = 0; i < pdev->num_resources; ++i) {
239 		struct resource *r = &pdev->resource[i];
240 
241 		if (r->flags != IORESOURCE_MEM)
242 			continue;
243 
244 		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
245 			dev_warn(&pdev->dev, "device has more than "
246 					__stringify(MAX_UIO_MAPS)
247 					" I/O memory resources.\n");
248 			break;
249 		}
250 
251 		uiomem->memtype = UIO_MEM_PHYS;
252 		uiomem->addr = r->start;
253 		uiomem->size = resource_size(r);
254 		++uiomem;
255 	}
256 
257 	priv->dmem_region_start = uiomem - &uioinfo->mem[0];
258 	priv->num_dmem_regions = pdata->num_dynamic_regions;
259 
260 	for (i = 0; i < pdata->num_dynamic_regions; ++i) {
261 		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
262 			dev_warn(&pdev->dev, "device has more than "
263 					__stringify(MAX_UIO_MAPS)
264 					" dynamic and fixed memory regions.\n");
265 			break;
266 		}
267 		uiomem->memtype = UIO_MEM_PHYS;
268 		uiomem->addr = DMEM_MAP_ERROR;
269 		uiomem->size = pdata->dynamic_region_sizes[i];
270 		++uiomem;
271 	}
272 
273 	while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
274 		uiomem->size = 0;
275 		++uiomem;
276 	}
277 
278 	/* This driver requires no hardware specific kernel code to handle
279 	 * interrupts. Instead, the interrupt handler simply disables the
280 	 * interrupt in the interrupt controller. User space is responsible
281 	 * for performing hardware specific acknowledge and re-enabling of
282 	 * the interrupt in the interrupt controller.
283 	 *
284 	 * Interrupt sharing is not supported.
285 	 */
286 
287 	uioinfo->handler = uio_dmem_genirq_handler;
288 	uioinfo->irqcontrol = uio_dmem_genirq_irqcontrol;
289 	uioinfo->open = uio_dmem_genirq_open;
290 	uioinfo->release = uio_dmem_genirq_release;
291 	uioinfo->priv = priv;
292 
293 	/* Enable Runtime PM for this device:
294 	 * The device starts in suspended state to allow the hardware to be
295 	 * turned off by default. The Runtime PM bus code should power on the
296 	 * hardware and enable clocks at open().
297 	 */
298 	pm_runtime_enable(&pdev->dev);
299 
300 	ret = devm_add_action_or_reset(&pdev->dev, uio_dmem_genirq_pm_disable, &pdev->dev);
301 	if (ret)
302 		return ret;
303 
304 	return devm_uio_register_device(&pdev->dev, priv->uioinfo);
305 }
306 
uio_dmem_genirq_runtime_nop(struct device * dev)307 static int uio_dmem_genirq_runtime_nop(struct device *dev)
308 {
309 	/* Runtime PM callback shared between ->runtime_suspend()
310 	 * and ->runtime_resume(). Simply returns success.
311 	 *
312 	 * In this driver pm_runtime_get_sync() and pm_runtime_put_sync()
313 	 * are used at open() and release() time. This allows the
314 	 * Runtime PM code to turn off power to the device while the
315 	 * device is unused, ie before open() and after release().
316 	 *
317 	 * This Runtime PM callback does not need to save or restore
318 	 * any registers since user space is responsbile for hardware
319 	 * register reinitialization after open().
320 	 */
321 	return 0;
322 }
323 
324 static const struct dev_pm_ops uio_dmem_genirq_dev_pm_ops = {
325 	.runtime_suspend = uio_dmem_genirq_runtime_nop,
326 	.runtime_resume = uio_dmem_genirq_runtime_nop,
327 };
328 
329 #ifdef CONFIG_OF
330 static const struct of_device_id uio_of_genirq_match[] = {
331 	{ /* empty for now */ },
332 };
333 MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
334 #endif
335 
336 static struct platform_driver uio_dmem_genirq = {
337 	.probe = uio_dmem_genirq_probe,
338 	.driver = {
339 		.name = DRIVER_NAME,
340 		.pm = &uio_dmem_genirq_dev_pm_ops,
341 		.of_match_table = of_match_ptr(uio_of_genirq_match),
342 	},
343 };
344 
345 module_platform_driver(uio_dmem_genirq);
346 
347 MODULE_AUTHOR("Damian Hobson-Garcia");
348 MODULE_DESCRIPTION("Userspace I/O platform driver with dynamic memory.");
349 MODULE_LICENSE("GPL v2");
350 MODULE_ALIAS("platform:" DRIVER_NAME);
351