1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2007-2009 Michal Simek
4  * (C) Copyright 2003 Xilinx Inc.
5  *
6  * Michal SIMEK <monstr@monstr.eu>
7  */
8 
9 #include <common.h>
10 #include <net.h>
11 #include <config.h>
12 #include <dm.h>
13 #include <console.h>
14 #include <malloc.h>
15 #include <asm/io.h>
16 #include <phy.h>
17 #include <miiphy.h>
18 #include <fdtdec.h>
19 #include <linux/errno.h>
20 #include <linux/kernel.h>
21 #include <asm/io.h>
22 
23 DECLARE_GLOBAL_DATA_PTR;
24 
25 #define ENET_ADDR_LENGTH	6
26 #define ETH_FCS_LEN		4 /* Octets in the FCS */
27 
28 /* Xmit complete */
29 #define XEL_TSR_XMIT_BUSY_MASK		0x00000001UL
30 /* Xmit interrupt enable bit */
31 #define XEL_TSR_XMIT_IE_MASK		0x00000008UL
32 /* Program the MAC address */
33 #define XEL_TSR_PROGRAM_MASK		0x00000002UL
34 /* define for programming the MAC address into the EMAC Lite */
35 #define XEL_TSR_PROG_MAC_ADDR	(XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
36 
37 /* Transmit packet length upper byte */
38 #define XEL_TPLR_LENGTH_MASK_HI		0x0000FF00UL
39 /* Transmit packet length lower byte */
40 #define XEL_TPLR_LENGTH_MASK_LO		0x000000FFUL
41 
42 /* Recv complete */
43 #define XEL_RSR_RECV_DONE_MASK		0x00000001UL
44 /* Recv interrupt enable bit */
45 #define XEL_RSR_RECV_IE_MASK		0x00000008UL
46 
47 /* MDIO Address Register Bit Masks */
48 #define XEL_MDIOADDR_REGADR_MASK  0x0000001F	/* Register Address */
49 #define XEL_MDIOADDR_PHYADR_MASK  0x000003E0	/* PHY Address */
50 #define XEL_MDIOADDR_PHYADR_SHIFT 5
51 #define XEL_MDIOADDR_OP_MASK	  0x00000400	/* RD/WR Operation */
52 
53 /* MDIO Write Data Register Bit Masks */
54 #define XEL_MDIOWR_WRDATA_MASK	  0x0000FFFF	/* Data to be Written */
55 
56 /* MDIO Read Data Register Bit Masks */
57 #define XEL_MDIORD_RDDATA_MASK	  0x0000FFFF	/* Data to be Read */
58 
59 /* MDIO Control Register Bit Masks */
60 #define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001	/* MDIO Status Mask */
61 #define XEL_MDIOCTRL_MDIOEN_MASK  0x00000008	/* MDIO Enable */
62 
63 struct emaclite_regs {
64 	u32 tx_ping; /* 0x0 - TX Ping buffer */
65 	u32 reserved1[504];
66 	u32 mdioaddr; /* 0x7e4 - MDIO Address Register */
67 	u32 mdiowr; /* 0x7e8 - MDIO Write Data Register */
68 	u32 mdiord;/* 0x7ec - MDIO Read Data Register */
69 	u32 mdioctrl; /* 0x7f0 - MDIO Control Register */
70 	u32 tx_ping_tplr; /* 0x7f4 - Tx packet length */
71 	u32 global_interrupt; /* 0x7f8 - Global interrupt enable */
72 	u32 tx_ping_tsr; /* 0x7fc - Tx status */
73 	u32 tx_pong; /* 0x800 - TX Pong buffer */
74 	u32 reserved2[508];
75 	u32 tx_pong_tplr; /* 0xff4 - Tx packet length */
76 	u32 reserved3; /* 0xff8 */
77 	u32 tx_pong_tsr; /* 0xffc - Tx status */
78 	u32 rx_ping; /* 0x1000 - Receive Buffer */
79 	u32 reserved4[510];
80 	u32 rx_ping_rsr; /* 0x17fc - Rx status */
81 	u32 rx_pong; /* 0x1800 - Receive Buffer */
82 	u32 reserved5[510];
83 	u32 rx_pong_rsr; /* 0x1ffc - Rx status */
84 };
85 
86 struct xemaclite {
87 	bool use_rx_pong_buffer_next;	/* Next RX buffer to read from */
88 	u32 txpp;		/* TX ping pong buffer */
89 	u32 rxpp;		/* RX ping pong buffer */
90 	int phyaddr;
91 	struct emaclite_regs *regs;
92 	struct phy_device *phydev;
93 	struct mii_dev *bus;
94 };
95 
96 static uchar etherrxbuff[PKTSIZE_ALIGN]; /* Receive buffer */
97 
xemaclite_alignedread(u32 * srcptr,void * destptr,u32 bytecount)98 static void xemaclite_alignedread(u32 *srcptr, void *destptr, u32 bytecount)
99 {
100 	u32 i;
101 	u32 alignbuffer;
102 	u32 *to32ptr;
103 	u32 *from32ptr;
104 	u8 *to8ptr;
105 	u8 *from8ptr;
106 
107 	from32ptr = (u32 *) srcptr;
108 
109 	/* Word aligned buffer, no correction needed. */
110 	to32ptr = (u32 *) destptr;
111 	while (bytecount > 3) {
112 		*to32ptr++ = *from32ptr++;
113 		bytecount -= 4;
114 	}
115 	to8ptr = (u8 *) to32ptr;
116 
117 	alignbuffer = *from32ptr++;
118 	from8ptr = (u8 *) &alignbuffer;
119 
120 	for (i = 0; i < bytecount; i++)
121 		*to8ptr++ = *from8ptr++;
122 }
123 
xemaclite_alignedwrite(void * srcptr,u32 * destptr,u32 bytecount)124 static void xemaclite_alignedwrite(void *srcptr, u32 *destptr, u32 bytecount)
125 {
126 	u32 i;
127 	u32 alignbuffer;
128 	u32 *to32ptr = (u32 *) destptr;
129 	u32 *from32ptr;
130 	u8 *to8ptr;
131 	u8 *from8ptr;
132 
133 	from32ptr = (u32 *) srcptr;
134 	while (bytecount > 3) {
135 
136 		*to32ptr++ = *from32ptr++;
137 		bytecount -= 4;
138 	}
139 
140 	alignbuffer = 0;
141 	to8ptr = (u8 *) &alignbuffer;
142 	from8ptr = (u8 *) from32ptr;
143 
144 	for (i = 0; i < bytecount; i++)
145 		*to8ptr++ = *from8ptr++;
146 
147 	*to32ptr++ = alignbuffer;
148 }
149 
wait_for_bit(const char * func,u32 * reg,const u32 mask,bool set,unsigned int timeout)150 static int wait_for_bit(const char *func, u32 *reg, const u32 mask,
151 			bool set, unsigned int timeout)
152 {
153 	u32 val;
154 	unsigned long start = get_timer(0);
155 
156 	while (1) {
157 		val = __raw_readl(reg);
158 
159 		if (!set)
160 			val = ~val;
161 
162 		if ((val & mask) == mask)
163 			return 0;
164 
165 		if (get_timer(start) > timeout)
166 			break;
167 
168 		if (ctrlc()) {
169 			puts("Abort\n");
170 			return -EINTR;
171 		}
172 
173 		udelay(1);
174 	}
175 
176 	debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
177 	      func, reg, mask, set);
178 
179 	return -ETIMEDOUT;
180 }
181 
mdio_wait(struct emaclite_regs * regs)182 static int mdio_wait(struct emaclite_regs *regs)
183 {
184 	return wait_for_bit(__func__, &regs->mdioctrl,
185 			    XEL_MDIOCTRL_MDIOSTS_MASK, false, 2000);
186 }
187 
phyread(struct xemaclite * emaclite,u32 phyaddress,u32 registernum,u16 * data)188 static u32 phyread(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
189 		   u16 *data)
190 {
191 	struct emaclite_regs *regs = emaclite->regs;
192 
193 	if (mdio_wait(regs))
194 		return 1;
195 
196 	u32 ctrl_reg = __raw_readl(&regs->mdioctrl);
197 	__raw_writel(XEL_MDIOADDR_OP_MASK
198 		| ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT)
199 		| registernum), &regs->mdioaddr);
200 	__raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, &regs->mdioctrl);
201 
202 	if (mdio_wait(regs))
203 		return 1;
204 
205 	/* Read data */
206 	*data = __raw_readl(&regs->mdiord);
207 	return 0;
208 }
209 
phywrite(struct xemaclite * emaclite,u32 phyaddress,u32 registernum,u16 data)210 static u32 phywrite(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
211 		    u16 data)
212 {
213 	struct emaclite_regs *regs = emaclite->regs;
214 
215 	if (mdio_wait(regs))
216 		return 1;
217 
218 	/*
219 	 * Write the PHY address, register number and clear the OP bit in the
220 	 * MDIO Address register and then write the value into the MDIO Write
221 	 * Data register. Finally, set the Status bit in the MDIO Control
222 	 * register to start a MDIO write transaction.
223 	 */
224 	u32 ctrl_reg = __raw_readl(&regs->mdioctrl);
225 	__raw_writel(~XEL_MDIOADDR_OP_MASK
226 		& ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT)
227 		| registernum), &regs->mdioaddr);
228 	__raw_writel(data, &regs->mdiowr);
229 	__raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, &regs->mdioctrl);
230 
231 	if (mdio_wait(regs))
232 		return 1;
233 
234 	return 0;
235 }
236 
emaclite_stop(struct udevice * dev)237 static void emaclite_stop(struct udevice *dev)
238 {
239 	debug("eth_stop\n");
240 }
241 
242 /* Use MII register 1 (MII status register) to detect PHY */
243 #define PHY_DETECT_REG  1
244 
245 /* Mask used to verify certain PHY features (or register contents)
246  * in the register above:
247  *  0x1000: 10Mbps full duplex support
248  *  0x0800: 10Mbps half duplex support
249  *  0x0008: Auto-negotiation support
250  */
251 #define PHY_DETECT_MASK 0x1808
252 
setup_phy(struct udevice * dev)253 static int setup_phy(struct udevice *dev)
254 {
255 	int i, ret;
256 	u16 phyreg;
257 	struct xemaclite *emaclite = dev_get_priv(dev);
258 	struct phy_device *phydev;
259 
260 	u32 supported = SUPPORTED_10baseT_Half |
261 			SUPPORTED_10baseT_Full |
262 			SUPPORTED_100baseT_Half |
263 			SUPPORTED_100baseT_Full;
264 
265 	if (emaclite->phyaddr != -1) {
266 		phyread(emaclite, emaclite->phyaddr, PHY_DETECT_REG, &phyreg);
267 		if ((phyreg != 0xFFFF) &&
268 		    ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
269 			/* Found a valid PHY address */
270 			debug("Default phy address %d is valid\n",
271 			      emaclite->phyaddr);
272 		} else {
273 			debug("PHY address is not setup correctly %d\n",
274 			      emaclite->phyaddr);
275 			emaclite->phyaddr = -1;
276 		}
277 	}
278 
279 	if (emaclite->phyaddr == -1) {
280 		/* detect the PHY address */
281 		for (i = 31; i >= 0; i--) {
282 			phyread(emaclite, i, PHY_DETECT_REG, &phyreg);
283 			if ((phyreg != 0xFFFF) &&
284 			    ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
285 				/* Found a valid PHY address */
286 				emaclite->phyaddr = i;
287 				debug("emaclite: Found valid phy address, %d\n",
288 				      i);
289 				break;
290 			}
291 		}
292 	}
293 
294 	/* interface - look at tsec */
295 	phydev = phy_connect(emaclite->bus, emaclite->phyaddr, dev,
296 			     PHY_INTERFACE_MODE_MII);
297 	/*
298 	 * Phy can support 1000baseT but device NOT that's why phydev->supported
299 	 * must be setup for 1000baseT. phydev->advertising setups what speeds
300 	 * will be used for autonegotiation where 1000baseT must be disabled.
301 	 */
302 	phydev->supported = supported | SUPPORTED_1000baseT_Half |
303 						SUPPORTED_1000baseT_Full;
304 	phydev->advertising = supported;
305 	emaclite->phydev = phydev;
306 	phy_config(phydev);
307 	ret = phy_startup(phydev);
308 	if (ret)
309 		return ret;
310 
311 	if (!phydev->link) {
312 		printf("%s: No link.\n", phydev->dev->name);
313 		return 0;
314 	}
315 
316 	/* Do not setup anything */
317 	return 1;
318 }
319 
emaclite_start(struct udevice * dev)320 static int emaclite_start(struct udevice *dev)
321 {
322 	struct xemaclite *emaclite = dev_get_priv(dev);
323 	struct eth_pdata *pdata = dev_get_platdata(dev);
324 	struct emaclite_regs *regs = emaclite->regs;
325 
326 	debug("EmacLite Initialization Started\n");
327 
328 /*
329  * TX - TX_PING & TX_PONG initialization
330  */
331 	/* Restart PING TX */
332 	__raw_writel(0, &regs->tx_ping_tsr);
333 	/* Copy MAC address */
334 	xemaclite_alignedwrite(pdata->enetaddr, &regs->tx_ping,
335 			       ENET_ADDR_LENGTH);
336 	/* Set the length */
337 	__raw_writel(ENET_ADDR_LENGTH, &regs->tx_ping_tplr);
338 	/* Update the MAC address in the EMAC Lite */
339 	__raw_writel(XEL_TSR_PROG_MAC_ADDR, &regs->tx_ping_tsr);
340 	/* Wait for EMAC Lite to finish with the MAC address update */
341 	while ((__raw_readl(&regs->tx_ping_tsr) &
342 		XEL_TSR_PROG_MAC_ADDR) != 0)
343 		;
344 
345 	if (emaclite->txpp) {
346 		/* The same operation with PONG TX */
347 		__raw_writel(0, &regs->tx_pong_tsr);
348 		xemaclite_alignedwrite(pdata->enetaddr, &regs->tx_pong,
349 				       ENET_ADDR_LENGTH);
350 		__raw_writel(ENET_ADDR_LENGTH, &regs->tx_pong_tplr);
351 		__raw_writel(XEL_TSR_PROG_MAC_ADDR, &regs->tx_pong_tsr);
352 		while ((__raw_readl(&regs->tx_pong_tsr) &
353 		       XEL_TSR_PROG_MAC_ADDR) != 0)
354 			;
355 	}
356 
357 /*
358  * RX - RX_PING & RX_PONG initialization
359  */
360 	/* Write out the value to flush the RX buffer */
361 	__raw_writel(XEL_RSR_RECV_IE_MASK, &regs->rx_ping_rsr);
362 
363 	if (emaclite->rxpp)
364 		__raw_writel(XEL_RSR_RECV_IE_MASK, &regs->rx_pong_rsr);
365 
366 	__raw_writel(XEL_MDIOCTRL_MDIOEN_MASK, &regs->mdioctrl);
367 	if (__raw_readl(&regs->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK)
368 		if (!setup_phy(dev))
369 			return -1;
370 
371 	debug("EmacLite Initialization complete\n");
372 	return 0;
373 }
374 
xemaclite_txbufferavailable(struct xemaclite * emaclite)375 static int xemaclite_txbufferavailable(struct xemaclite *emaclite)
376 {
377 	u32 tmp;
378 	struct emaclite_regs *regs = emaclite->regs;
379 
380 	/*
381 	 * Read the other buffer register
382 	 * and determine if the other buffer is available
383 	 */
384 	tmp = ~__raw_readl(&regs->tx_ping_tsr);
385 	if (emaclite->txpp)
386 		tmp |= ~__raw_readl(&regs->tx_pong_tsr);
387 
388 	return !(tmp & XEL_TSR_XMIT_BUSY_MASK);
389 }
390 
emaclite_send(struct udevice * dev,void * ptr,int len)391 static int emaclite_send(struct udevice *dev, void *ptr, int len)
392 {
393 	u32 reg;
394 	struct xemaclite *emaclite = dev_get_priv(dev);
395 	struct emaclite_regs *regs = emaclite->regs;
396 
397 	u32 maxtry = 1000;
398 
399 	if (len > PKTSIZE)
400 		len = PKTSIZE;
401 
402 	while (xemaclite_txbufferavailable(emaclite) && maxtry) {
403 		udelay(10);
404 		maxtry--;
405 	}
406 
407 	if (!maxtry) {
408 		printf("Error: Timeout waiting for ethernet TX buffer\n");
409 		/* Restart PING TX */
410 		__raw_writel(0, &regs->tx_ping_tsr);
411 		if (emaclite->txpp) {
412 			__raw_writel(0, &regs->tx_pong_tsr);
413 		}
414 		return -1;
415 	}
416 
417 	/* Determine if the expected buffer address is empty */
418 	reg = __raw_readl(&regs->tx_ping_tsr);
419 	if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
420 		debug("Send packet from tx_ping buffer\n");
421 		/* Write the frame to the buffer */
422 		xemaclite_alignedwrite(ptr, &regs->tx_ping, len);
423 		__raw_writel(len
424 			& (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO),
425 		       &regs->tx_ping_tplr);
426 		reg = __raw_readl(&regs->tx_ping_tsr);
427 		reg |= XEL_TSR_XMIT_BUSY_MASK;
428 		__raw_writel(reg, &regs->tx_ping_tsr);
429 		return 0;
430 	}
431 
432 	if (emaclite->txpp) {
433 		/* Determine if the expected buffer address is empty */
434 		reg = __raw_readl(&regs->tx_pong_tsr);
435 		if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
436 			debug("Send packet from tx_pong buffer\n");
437 			/* Write the frame to the buffer */
438 			xemaclite_alignedwrite(ptr, &regs->tx_pong, len);
439 			__raw_writel(len &
440 				 (XEL_TPLR_LENGTH_MASK_HI |
441 				  XEL_TPLR_LENGTH_MASK_LO),
442 				  &regs->tx_pong_tplr);
443 			reg = __raw_readl(&regs->tx_pong_tsr);
444 			reg |= XEL_TSR_XMIT_BUSY_MASK;
445 			__raw_writel(reg, &regs->tx_pong_tsr);
446 			return 0;
447 		}
448 	}
449 
450 	puts("Error while sending frame\n");
451 	return -1;
452 }
453 
emaclite_recv(struct udevice * dev,int flags,uchar ** packetp)454 static int emaclite_recv(struct udevice *dev, int flags, uchar **packetp)
455 {
456 	u32 length, first_read, reg, attempt = 0;
457 	void *addr, *ack;
458 	struct xemaclite *emaclite = dev->priv;
459 	struct emaclite_regs *regs = emaclite->regs;
460 	struct ethernet_hdr *eth;
461 	struct ip_udp_hdr *ip;
462 
463 try_again:
464 	if (!emaclite->use_rx_pong_buffer_next) {
465 		reg = __raw_readl(&regs->rx_ping_rsr);
466 		debug("Testing data at rx_ping\n");
467 		if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
468 			debug("Data found in rx_ping buffer\n");
469 			addr = &regs->rx_ping;
470 			ack = &regs->rx_ping_rsr;
471 		} else {
472 			debug("Data not found in rx_ping buffer\n");
473 			/* Pong buffer is not available - return immediately */
474 			if (!emaclite->rxpp)
475 				return -1;
476 
477 			/* Try pong buffer if this is first attempt */
478 			if (attempt++)
479 				return -1;
480 			emaclite->use_rx_pong_buffer_next =
481 					!emaclite->use_rx_pong_buffer_next;
482 			goto try_again;
483 		}
484 	} else {
485 		reg = __raw_readl(&regs->rx_pong_rsr);
486 		debug("Testing data at rx_pong\n");
487 		if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
488 			debug("Data found in rx_pong buffer\n");
489 			addr = &regs->rx_pong;
490 			ack = &regs->rx_pong_rsr;
491 		} else {
492 			debug("Data not found in rx_pong buffer\n");
493 			/* Try ping buffer if this is first attempt */
494 			if (attempt++)
495 				return -1;
496 			emaclite->use_rx_pong_buffer_next =
497 					!emaclite->use_rx_pong_buffer_next;
498 			goto try_again;
499 		}
500 	}
501 
502 	/* Read all bytes for ARP packet with 32bit alignment - 48bytes  */
503 	first_read = ALIGN(ETHER_HDR_SIZE + ARP_HDR_SIZE + ETH_FCS_LEN, 4);
504 	xemaclite_alignedread(addr, etherrxbuff, first_read);
505 
506 	/* Detect real packet size */
507 	eth = (struct ethernet_hdr *)etherrxbuff;
508 	switch (ntohs(eth->et_protlen)) {
509 	case PROT_ARP:
510 		length = first_read;
511 		debug("ARP Packet %x\n", length);
512 		break;
513 	case PROT_IP:
514 		ip = (struct ip_udp_hdr *)(etherrxbuff + ETHER_HDR_SIZE);
515 		length = ntohs(ip->ip_len);
516 		length += ETHER_HDR_SIZE + ETH_FCS_LEN;
517 		debug("IP Packet %x\n", length);
518 		break;
519 	default:
520 		debug("Other Packet\n");
521 		length = PKTSIZE;
522 		break;
523 	}
524 
525 	/* Read the rest of the packet which is longer then first read */
526 	if (length != first_read)
527 		xemaclite_alignedread(addr + first_read,
528 				      etherrxbuff + first_read,
529 				      length - first_read);
530 
531 	/* Acknowledge the frame */
532 	reg = __raw_readl(ack);
533 	reg &= ~XEL_RSR_RECV_DONE_MASK;
534 	__raw_writel(reg, ack);
535 
536 	debug("Packet receive from 0x%p, length %dB\n", addr, length);
537 	*packetp = etherrxbuff;
538 	return length;
539 }
540 
emaclite_miiphy_read(struct mii_dev * bus,int addr,int devad,int reg)541 static int emaclite_miiphy_read(struct mii_dev *bus, int addr,
542 				int devad, int reg)
543 {
544 	u32 ret;
545 	u16 val = 0;
546 
547 	ret = phyread(bus->priv, addr, reg, &val);
548 	debug("emaclite: Read MII 0x%x, 0x%x, 0x%x, %d\n", addr, reg, val, ret);
549 	return val;
550 }
551 
emaclite_miiphy_write(struct mii_dev * bus,int addr,int devad,int reg,u16 value)552 static int emaclite_miiphy_write(struct mii_dev *bus, int addr, int devad,
553 				 int reg, u16 value)
554 {
555 	debug("emaclite: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, value);
556 	return phywrite(bus->priv, addr, reg, value);
557 }
558 
emaclite_probe(struct udevice * dev)559 static int emaclite_probe(struct udevice *dev)
560 {
561 	struct xemaclite *emaclite = dev_get_priv(dev);
562 	int ret;
563 
564 	emaclite->bus = mdio_alloc();
565 	emaclite->bus->read = emaclite_miiphy_read;
566 	emaclite->bus->write = emaclite_miiphy_write;
567 	emaclite->bus->priv = emaclite;
568 
569 	ret = mdio_register_seq(emaclite->bus, dev->seq);
570 	if (ret)
571 		return ret;
572 
573 	return 0;
574 }
575 
emaclite_remove(struct udevice * dev)576 static int emaclite_remove(struct udevice *dev)
577 {
578 	struct xemaclite *emaclite = dev_get_priv(dev);
579 
580 	free(emaclite->phydev);
581 	mdio_unregister(emaclite->bus);
582 	mdio_free(emaclite->bus);
583 
584 	return 0;
585 }
586 
587 static const struct eth_ops emaclite_ops = {
588 	.start = emaclite_start,
589 	.send = emaclite_send,
590 	.recv = emaclite_recv,
591 	.stop = emaclite_stop,
592 };
593 
emaclite_ofdata_to_platdata(struct udevice * dev)594 static int emaclite_ofdata_to_platdata(struct udevice *dev)
595 {
596 	struct eth_pdata *pdata = dev_get_platdata(dev);
597 	struct xemaclite *emaclite = dev_get_priv(dev);
598 	int offset = 0;
599 
600 	pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
601 	emaclite->regs = (struct emaclite_regs *)ioremap_nocache(pdata->iobase,
602 								 0x10000);
603 
604 	emaclite->phyaddr = -1;
605 
606 	offset = fdtdec_lookup_phandle(gd->fdt_blob, dev_of_offset(dev),
607 				      "phy-handle");
608 	if (offset > 0)
609 		emaclite->phyaddr = fdtdec_get_int(gd->fdt_blob, offset,
610 						   "reg", -1);
611 
612 	emaclite->txpp = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
613 					"xlnx,tx-ping-pong", 0);
614 	emaclite->rxpp = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
615 					"xlnx,rx-ping-pong", 0);
616 
617 	printf("EMACLITE: %lx, phyaddr %d, %d/%d\n", (ulong)emaclite->regs,
618 	       emaclite->phyaddr, emaclite->txpp, emaclite->rxpp);
619 
620 	return 0;
621 }
622 
623 static const struct udevice_id emaclite_ids[] = {
624 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a" },
625 	{ }
626 };
627 
628 U_BOOT_DRIVER(emaclite) = {
629 	.name   = "emaclite",
630 	.id     = UCLASS_ETH,
631 	.of_match = emaclite_ids,
632 	.ofdata_to_platdata = emaclite_ofdata_to_platdata,
633 	.probe  = emaclite_probe,
634 	.remove = emaclite_remove,
635 	.ops    = &emaclite_ops,
636 	.priv_auto_alloc_size = sizeof(struct xemaclite),
637 	.platdata_auto_alloc_size = sizeof(struct eth_pdata),
638 };
639