1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * tpl0102.c - Support for Texas Instruments digital potentiometers
4  *
5  * Copyright (C) 2016, 2018
6  * Author: Matt Ranostay <matt.ranostay@konsulko.com>
7  *
8  * TODO: enable/disable hi-z output control
9  */
10 
11 #include <linux/module.h>
12 #include <linux/i2c.h>
13 #include <linux/regmap.h>
14 #include <linux/iio/iio.h>
15 
16 struct tpl0102_cfg {
17 	int wipers;
18 	int avail[3];
19 	int kohms;
20 };
21 
22 enum tpl0102_type {
23 	CAT5140_503,
24 	CAT5140_104,
25 	TPL0102_104,
26 	TPL0401_103,
27 };
28 
29 static const struct tpl0102_cfg tpl0102_cfg[] = {
30 	/* on-semiconductor parts */
31 	[CAT5140_503] = { .wipers = 1, .avail = { 0, 1, 255 }, .kohms = 50, },
32 	[CAT5140_104] = { .wipers = 1, .avail = { 0, 1, 255 }, .kohms = 100, },
33 	/* ti parts */
34 	[TPL0102_104] = { .wipers = 2, .avail = { 0, 1, 255 }, .kohms = 100 },
35 	[TPL0401_103] = { .wipers = 1, .avail = { 0, 1, 127 }, .kohms = 10, },
36 };
37 
38 struct tpl0102_data {
39 	struct regmap *regmap;
40 	const struct tpl0102_cfg *cfg;
41 };
42 
43 static const struct regmap_config tpl0102_regmap_config = {
44 	.reg_bits = 8,
45 	.val_bits = 8,
46 };
47 
48 #define TPL0102_CHANNEL(ch) {					\
49 	.type = IIO_RESISTANCE,					\
50 	.indexed = 1,						\
51 	.output = 1,						\
52 	.channel = (ch),					\
53 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
54 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
55 	.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW),	\
56 }
57 
58 static const struct iio_chan_spec tpl0102_channels[] = {
59 	TPL0102_CHANNEL(0),
60 	TPL0102_CHANNEL(1),
61 };
62 
tpl0102_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long mask)63 static int tpl0102_read_raw(struct iio_dev *indio_dev,
64 			    struct iio_chan_spec const *chan,
65 			    int *val, int *val2, long mask)
66 {
67 	struct tpl0102_data *data = iio_priv(indio_dev);
68 
69 	switch (mask) {
70 	case IIO_CHAN_INFO_RAW: {
71 		int ret = regmap_read(data->regmap, chan->channel, val);
72 
73 		return ret ? ret : IIO_VAL_INT;
74 	}
75 	case IIO_CHAN_INFO_SCALE:
76 		*val = 1000 * data->cfg->kohms;
77 		*val2 = data->cfg->avail[2] + 1;
78 		return IIO_VAL_FRACTIONAL;
79 	}
80 
81 	return -EINVAL;
82 }
83 
tpl0102_read_avail(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,const int ** vals,int * type,int * length,long mask)84 static int tpl0102_read_avail(struct iio_dev *indio_dev,
85 			      struct iio_chan_spec const *chan,
86 			      const int **vals, int *type, int *length,
87 			      long mask)
88 {
89 	struct tpl0102_data *data = iio_priv(indio_dev);
90 
91 	switch (mask) {
92 	case IIO_CHAN_INFO_RAW:
93 		*length = ARRAY_SIZE(data->cfg->avail);
94 		*vals = data->cfg->avail;
95 		*type = IIO_VAL_INT;
96 		return IIO_AVAIL_RANGE;
97 	}
98 
99 	return -EINVAL;
100 }
101 
tpl0102_write_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int val,int val2,long mask)102 static int tpl0102_write_raw(struct iio_dev *indio_dev,
103 			     struct iio_chan_spec const *chan,
104 			     int val, int val2, long mask)
105 {
106 	struct tpl0102_data *data = iio_priv(indio_dev);
107 
108 	if (mask != IIO_CHAN_INFO_RAW)
109 		return -EINVAL;
110 
111 	if (val > data->cfg->avail[2] || val < 0)
112 		return -EINVAL;
113 
114 	return regmap_write(data->regmap, chan->channel, val);
115 }
116 
117 static const struct iio_info tpl0102_info = {
118 	.read_raw = tpl0102_read_raw,
119 	.read_avail = tpl0102_read_avail,
120 	.write_raw = tpl0102_write_raw,
121 };
122 
tpl0102_probe(struct i2c_client * client)123 static int tpl0102_probe(struct i2c_client *client)
124 {
125 	const struct i2c_device_id *id = i2c_client_get_device_id(client);
126 	struct device *dev = &client->dev;
127 	struct tpl0102_data *data;
128 	struct iio_dev *indio_dev;
129 
130 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
131 	if (!indio_dev)
132 		return -ENOMEM;
133 	data = iio_priv(indio_dev);
134 	i2c_set_clientdata(client, indio_dev);
135 
136 	data->cfg = &tpl0102_cfg[id->driver_data];
137 	data->regmap = devm_regmap_init_i2c(client, &tpl0102_regmap_config);
138 	if (IS_ERR(data->regmap)) {
139 		dev_err(dev, "regmap initialization failed\n");
140 		return PTR_ERR(data->regmap);
141 	}
142 
143 	indio_dev->info = &tpl0102_info;
144 	indio_dev->channels = tpl0102_channels;
145 	indio_dev->num_channels = data->cfg->wipers;
146 	indio_dev->name = client->name;
147 
148 	return devm_iio_device_register(dev, indio_dev);
149 }
150 
151 static const struct i2c_device_id tpl0102_id[] = {
152 	{ "cat5140-503", CAT5140_503 },
153 	{ "cat5140-104", CAT5140_104 },
154 	{ "tpl0102-104", TPL0102_104 },
155 	{ "tpl0401-103", TPL0401_103 },
156 	{}
157 };
158 MODULE_DEVICE_TABLE(i2c, tpl0102_id);
159 
160 static struct i2c_driver tpl0102_driver = {
161 	.driver = {
162 		.name = "tpl0102",
163 	},
164 	.probe = tpl0102_probe,
165 	.id_table = tpl0102_id,
166 };
167 
168 module_i2c_driver(tpl0102_driver);
169 
170 MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
171 MODULE_DESCRIPTION("TPL0102 digital potentiometer");
172 MODULE_LICENSE("GPL");
173