1 /*
2 * Texas Instruments TMP105 temperature sensor.
3 *
4 * Copyright (C) 2008 Nokia Corporation
5 * Written by Andrzej Zaborowski <andrew@openedhand.com>
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 or
10 * (at your option) version 3 of the License.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
19 */
20
21 #include "qemu/osdep.h"
22 #include "hw/i2c/i2c.h"
23 #include "hw/irq.h"
24 #include "migration/vmstate.h"
25 #include "hw/sensor/tmp105.h"
26 #include "qapi/error.h"
27 #include "qapi/visitor.h"
28 #include "qemu/module.h"
29
tmp105_interrupt_update(TMP105State * s)30 static void tmp105_interrupt_update(TMP105State *s)
31 {
32 qemu_set_irq(s->pin, s->alarm ^ ((~s->config >> 2) & 1)); /* POL */
33 }
34
tmp105_alarm_update(TMP105State * s)35 static void tmp105_alarm_update(TMP105State *s)
36 {
37 if ((s->config >> 0) & 1) { /* SD */
38 if ((s->config >> 7) & 1) /* OS */
39 s->config &= ~(1 << 7); /* OS */
40 else
41 return;
42 }
43
44 if (s->config >> 1 & 1) {
45 /*
46 * TM == 1 : Interrupt mode. We signal Alert when the
47 * temperature rises above T_high, and expect the guest to clear
48 * it (eg by reading a device register).
49 */
50 if (s->detect_falling) {
51 if (s->temperature < s->limit[0]) {
52 s->alarm = 1;
53 s->detect_falling = false;
54 }
55 } else {
56 if (s->temperature >= s->limit[1]) {
57 s->alarm = 1;
58 s->detect_falling = true;
59 }
60 }
61 } else {
62 /*
63 * TM == 0 : Comparator mode. We signal Alert when the temperature
64 * rises above T_high, and stop signalling it when the temperature
65 * falls below T_low.
66 */
67 if (s->detect_falling) {
68 if (s->temperature < s->limit[0]) {
69 s->alarm = 0;
70 s->detect_falling = false;
71 }
72 } else {
73 if (s->temperature >= s->limit[1]) {
74 s->alarm = 1;
75 s->detect_falling = true;
76 }
77 }
78 }
79
80 tmp105_interrupt_update(s);
81 }
82
tmp105_get_temperature(Object * obj,Visitor * v,const char * name,void * opaque,Error ** errp)83 static void tmp105_get_temperature(Object *obj, Visitor *v, const char *name,
84 void *opaque, Error **errp)
85 {
86 TMP105State *s = TMP105(obj);
87 int64_t value = s->temperature * 1000 / 256;
88
89 visit_type_int(v, name, &value, errp);
90 }
91
92 /* Units are 0.001 centigrades relative to 0 C. s->temperature is 8.8
93 * fixed point, so units are 1/256 centigrades. A simple ratio will do.
94 */
tmp105_set_temperature(Object * obj,Visitor * v,const char * name,void * opaque,Error ** errp)95 static void tmp105_set_temperature(Object *obj, Visitor *v, const char *name,
96 void *opaque, Error **errp)
97 {
98 TMP105State *s = TMP105(obj);
99 int64_t temp;
100
101 if (!visit_type_int(v, name, &temp, errp)) {
102 return;
103 }
104 if (temp >= 128000 || temp < -128000) {
105 error_setg(errp, "value %" PRId64 ".%03" PRIu64 " C is out of range",
106 temp / 1000, temp % 1000);
107 return;
108 }
109
110 s->temperature = (int16_t) (temp * 256 / 1000);
111
112 tmp105_alarm_update(s);
113 }
114
115 static const int tmp105_faultq[4] = { 1, 2, 4, 6 };
116
tmp105_read(TMP105State * s)117 static void tmp105_read(TMP105State *s)
118 {
119 s->len = 0;
120
121 if ((s->config >> 1) & 1) { /* TM */
122 s->alarm = 0;
123 tmp105_interrupt_update(s);
124 }
125
126 switch (s->pointer & 3) {
127 case TMP105_REG_TEMPERATURE:
128 s->buf[s->len ++] = (((uint16_t) s->temperature) >> 8);
129 s->buf[s->len ++] = (((uint16_t) s->temperature) >> 0) &
130 (0xf0 << ((~s->config >> 5) & 3)); /* R */
131 break;
132
133 case TMP105_REG_CONFIG:
134 s->buf[s->len ++] = s->config;
135 break;
136
137 case TMP105_REG_T_LOW:
138 s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 8;
139 s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 0;
140 break;
141
142 case TMP105_REG_T_HIGH:
143 s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 8;
144 s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 0;
145 break;
146 }
147 }
148
tmp105_write(TMP105State * s)149 static void tmp105_write(TMP105State *s)
150 {
151 switch (s->pointer & 3) {
152 case TMP105_REG_TEMPERATURE:
153 break;
154
155 case TMP105_REG_CONFIG:
156 if (s->buf[0] & ~s->config & (1 << 0)) /* SD */
157 printf("%s: TMP105 shutdown\n", __func__);
158 s->config = s->buf[0];
159 s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */
160 tmp105_alarm_update(s);
161 break;
162
163 case TMP105_REG_T_LOW:
164 case TMP105_REG_T_HIGH:
165 if (s->len >= 3)
166 s->limit[s->pointer & 1] = (int16_t)
167 ((((uint16_t) s->buf[0]) << 8) | s->buf[1]);
168 tmp105_alarm_update(s);
169 break;
170 }
171 }
172
tmp105_rx(I2CSlave * i2c)173 static uint8_t tmp105_rx(I2CSlave *i2c)
174 {
175 TMP105State *s = TMP105(i2c);
176
177 if (s->len < 2) {
178 return s->buf[s->len ++];
179 } else {
180 return 0xff;
181 }
182 }
183
tmp105_tx(I2CSlave * i2c,uint8_t data)184 static int tmp105_tx(I2CSlave *i2c, uint8_t data)
185 {
186 TMP105State *s = TMP105(i2c);
187
188 if (s->len == 0) {
189 s->pointer = data;
190 s->len++;
191 } else {
192 if (s->len <= 2) {
193 s->buf[s->len - 1] = data;
194 }
195 s->len++;
196 tmp105_write(s);
197 }
198
199 return 0;
200 }
201
tmp105_event(I2CSlave * i2c,enum i2c_event event)202 static int tmp105_event(I2CSlave *i2c, enum i2c_event event)
203 {
204 TMP105State *s = TMP105(i2c);
205
206 if (event == I2C_START_RECV) {
207 tmp105_read(s);
208 }
209
210 s->len = 0;
211 return 0;
212 }
213
tmp105_post_load(void * opaque,int version_id)214 static int tmp105_post_load(void *opaque, int version_id)
215 {
216 TMP105State *s = opaque;
217
218 s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */
219
220 tmp105_interrupt_update(s);
221 return 0;
222 }
223
detect_falling_needed(void * opaque)224 static bool detect_falling_needed(void *opaque)
225 {
226 TMP105State *s = opaque;
227
228 /*
229 * We only need to migrate the detect_falling bool if it's set;
230 * for migration from older machines we assume that it is false
231 * (ie temperature is not out of range).
232 */
233 return s->detect_falling;
234 }
235
236 static const VMStateDescription vmstate_tmp105_detect_falling = {
237 .name = "TMP105/detect-falling",
238 .version_id = 1,
239 .minimum_version_id = 1,
240 .needed = detect_falling_needed,
241 .fields = (const VMStateField[]) {
242 VMSTATE_BOOL(detect_falling, TMP105State),
243 VMSTATE_END_OF_LIST()
244 }
245 };
246
247 static const VMStateDescription vmstate_tmp105 = {
248 .name = "TMP105",
249 .version_id = 0,
250 .minimum_version_id = 0,
251 .post_load = tmp105_post_load,
252 .fields = (const VMStateField[]) {
253 VMSTATE_UINT8(len, TMP105State),
254 VMSTATE_UINT8_ARRAY(buf, TMP105State, 2),
255 VMSTATE_UINT8(pointer, TMP105State),
256 VMSTATE_UINT8(config, TMP105State),
257 VMSTATE_INT16(temperature, TMP105State),
258 VMSTATE_INT16_ARRAY(limit, TMP105State, 2),
259 VMSTATE_UINT8(alarm, TMP105State),
260 VMSTATE_I2C_SLAVE(i2c, TMP105State),
261 VMSTATE_END_OF_LIST()
262 },
263 .subsections = (const VMStateDescription * const []) {
264 &vmstate_tmp105_detect_falling,
265 NULL
266 }
267 };
268
tmp105_reset(I2CSlave * i2c)269 static void tmp105_reset(I2CSlave *i2c)
270 {
271 TMP105State *s = TMP105(i2c);
272
273 s->temperature = 0;
274 s->pointer = 0;
275 s->config = 0;
276 s->faults = tmp105_faultq[(s->config >> 3) & 3];
277 s->alarm = 0;
278 s->detect_falling = false;
279
280 s->limit[0] = 0x4b00; /* T_LOW, 75 degrees C */
281 s->limit[1] = 0x5000; /* T_HIGH, 80 degrees C */
282
283 tmp105_interrupt_update(s);
284 }
285
tmp105_realize(DeviceState * dev,Error ** errp)286 static void tmp105_realize(DeviceState *dev, Error **errp)
287 {
288 I2CSlave *i2c = I2C_SLAVE(dev);
289 TMP105State *s = TMP105(i2c);
290
291 qdev_init_gpio_out(&i2c->qdev, &s->pin, 1);
292
293 tmp105_reset(&s->i2c);
294 }
295
tmp105_initfn(Object * obj)296 static void tmp105_initfn(Object *obj)
297 {
298 object_property_add(obj, "temperature", "int",
299 tmp105_get_temperature,
300 tmp105_set_temperature, NULL, NULL);
301 }
302
tmp105_class_init(ObjectClass * klass,void * data)303 static void tmp105_class_init(ObjectClass *klass, void *data)
304 {
305 DeviceClass *dc = DEVICE_CLASS(klass);
306 I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
307
308 dc->realize = tmp105_realize;
309 k->event = tmp105_event;
310 k->recv = tmp105_rx;
311 k->send = tmp105_tx;
312 dc->vmsd = &vmstate_tmp105;
313 }
314
315 static const TypeInfo tmp105_info = {
316 .name = TYPE_TMP105,
317 .parent = TYPE_I2C_SLAVE,
318 .instance_size = sizeof(TMP105State),
319 .instance_init = tmp105_initfn,
320 .class_init = tmp105_class_init,
321 };
322
tmp105_register_types(void)323 static void tmp105_register_types(void)
324 {
325 type_register_static(&tmp105_info);
326 }
327
328 type_init(tmp105_register_types)
329