1 // SPDX-License-Identifier: GPL-2.0-only
2 /*******************************************************************************
3 This contains the functions to handle the platform driver.
4
5 Copyright (C) 2007-2011 STMicroelectronics Ltd
6
7
8 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
9 *******************************************************************************/
10
11 #include <linux/device.h>
12 #include <linux/platform_device.h>
13 #include <linux/pm_runtime.h>
14 #include <linux/module.h>
15 #include <linux/io.h>
16 #include <linux/of.h>
17 #include <linux/of_net.h>
18 #include <linux/of_mdio.h>
19
20 #include "stmmac.h"
21 #include "stmmac_platform.h"
22
23 #ifdef CONFIG_OF
24
25 /**
26 * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins
27 * @dev: struct device of the platform device
28 * @mcast_bins: Multicast filtering bins
29 * Description:
30 * this function validates the number of Multicast filtering bins specified
31 * by the configuration through the device tree. The Synopsys GMAC supports
32 * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC
33 * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds
34 * to 7 bits, and 256 refers to 8 bits of the CRC. Any other setting is
35 * invalid and will cause the filtering algorithm to use Multicast
36 * promiscuous mode.
37 */
dwmac1000_validate_mcast_bins(struct device * dev,int mcast_bins)38 static int dwmac1000_validate_mcast_bins(struct device *dev, int mcast_bins)
39 {
40 int x = mcast_bins;
41
42 switch (x) {
43 case HASH_TABLE_SIZE:
44 case 128:
45 case 256:
46 break;
47 default:
48 x = 0;
49 dev_info(dev, "Hash table entries set to unexpected value %d\n",
50 mcast_bins);
51 break;
52 }
53 return x;
54 }
55
56 /**
57 * dwmac1000_validate_ucast_entries - validate the Unicast address entries
58 * @dev: struct device of the platform device
59 * @ucast_entries: number of Unicast address entries
60 * Description:
61 * This function validates the number of Unicast address entries supported
62 * by a particular Synopsys 10/100/1000 controller. The Synopsys controller
63 * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter
64 * logic. This function validates a valid, supported configuration is
65 * selected, and defaults to 1 Unicast address if an unsupported
66 * configuration is selected.
67 */
dwmac1000_validate_ucast_entries(struct device * dev,int ucast_entries)68 static int dwmac1000_validate_ucast_entries(struct device *dev,
69 int ucast_entries)
70 {
71 int x = ucast_entries;
72
73 switch (x) {
74 case 1 ... 32:
75 case 64:
76 case 128:
77 break;
78 default:
79 x = 1;
80 dev_info(dev, "Unicast table entries set to unexpected value %d\n",
81 ucast_entries);
82 break;
83 }
84 return x;
85 }
86
87 /**
88 * stmmac_axi_setup - parse DT parameters for programming the AXI register
89 * @pdev: platform device
90 * Description:
91 * if required, from device-tree the AXI internal register can be tuned
92 * by using platform parameters.
93 */
stmmac_axi_setup(struct platform_device * pdev)94 static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev)
95 {
96 struct device_node *np;
97 struct stmmac_axi *axi;
98
99 np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0);
100 if (!np)
101 return NULL;
102
103 axi = devm_kzalloc(&pdev->dev, sizeof(*axi), GFP_KERNEL);
104 if (!axi) {
105 of_node_put(np);
106 return ERR_PTR(-ENOMEM);
107 }
108
109 axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en");
110 axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm");
111 axi->axi_kbbe = of_property_read_bool(np, "snps,kbbe");
112 axi->axi_fb = of_property_read_bool(np, "snps,fb");
113 axi->axi_mb = of_property_read_bool(np, "snps,mb");
114 axi->axi_rb = of_property_read_bool(np, "snps,rb");
115
116 if (of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt))
117 axi->axi_wr_osr_lmt = 1;
118 if (of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt))
119 axi->axi_rd_osr_lmt = 1;
120 of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN);
121 of_node_put(np);
122
123 return axi;
124 }
125
126 /**
127 * stmmac_mtl_setup - parse DT parameters for multiple queues configuration
128 * @pdev: platform device
129 * @plat: enet data
130 */
stmmac_mtl_setup(struct platform_device * pdev,struct plat_stmmacenet_data * plat)131 static int stmmac_mtl_setup(struct platform_device *pdev,
132 struct plat_stmmacenet_data *plat)
133 {
134 struct device_node *q_node;
135 struct device_node *rx_node;
136 struct device_node *tx_node;
137 u8 queue = 0;
138 int ret = 0;
139
140 /* For backwards-compatibility with device trees that don't have any
141 * snps,mtl-rx-config or snps,mtl-tx-config properties, we fall back
142 * to one RX and TX queues each.
143 */
144 plat->rx_queues_to_use = 1;
145 plat->tx_queues_to_use = 1;
146
147 /* First Queue must always be in DCB mode. As MTL_QUEUE_DCB = 1 we need
148 * to always set this, otherwise Queue will be classified as AVB
149 * (because MTL_QUEUE_AVB = 0).
150 */
151 plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
152 plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
153
154 rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0);
155 if (!rx_node)
156 return ret;
157
158 tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0);
159 if (!tx_node) {
160 of_node_put(rx_node);
161 return ret;
162 }
163
164 /* Processing RX queues common config */
165 if (of_property_read_u32(rx_node, "snps,rx-queues-to-use",
166 &plat->rx_queues_to_use))
167 plat->rx_queues_to_use = 1;
168
169 if (of_property_read_bool(rx_node, "snps,rx-sched-sp"))
170 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
171 else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp"))
172 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP;
173 else
174 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
175
176 /* Processing individual RX queue config */
177 for_each_child_of_node(rx_node, q_node) {
178 if (queue >= plat->rx_queues_to_use)
179 break;
180
181 if (of_property_read_bool(q_node, "snps,dcb-algorithm"))
182 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
183 else if (of_property_read_bool(q_node, "snps,avb-algorithm"))
184 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
185 else
186 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
187
188 if (of_property_read_u32(q_node, "snps,map-to-dma-channel",
189 &plat->rx_queues_cfg[queue].chan))
190 plat->rx_queues_cfg[queue].chan = queue;
191 /* TODO: Dynamic mapping to be included in the future */
192
193 if (of_property_read_u32(q_node, "snps,priority",
194 &plat->rx_queues_cfg[queue].prio)) {
195 plat->rx_queues_cfg[queue].prio = 0;
196 plat->rx_queues_cfg[queue].use_prio = false;
197 } else {
198 plat->rx_queues_cfg[queue].use_prio = true;
199 }
200
201 /* RX queue specific packet type routing */
202 if (of_property_read_bool(q_node, "snps,route-avcp"))
203 plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ;
204 else if (of_property_read_bool(q_node, "snps,route-ptp"))
205 plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ;
206 else if (of_property_read_bool(q_node, "snps,route-dcbcp"))
207 plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ;
208 else if (of_property_read_bool(q_node, "snps,route-up"))
209 plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ;
210 else if (of_property_read_bool(q_node, "snps,route-multi-broad"))
211 plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ;
212 else
213 plat->rx_queues_cfg[queue].pkt_route = 0x0;
214
215 queue++;
216 }
217 if (queue != plat->rx_queues_to_use) {
218 ret = -EINVAL;
219 dev_err(&pdev->dev, "Not all RX queues were configured\n");
220 goto out;
221 }
222
223 /* Processing TX queues common config */
224 if (of_property_read_u32(tx_node, "snps,tx-queues-to-use",
225 &plat->tx_queues_to_use))
226 plat->tx_queues_to_use = 1;
227
228 if (of_property_read_bool(tx_node, "snps,tx-sched-wrr"))
229 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
230 else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq"))
231 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ;
232 else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr"))
233 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR;
234 else
235 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP;
236
237 queue = 0;
238
239 /* Processing individual TX queue config */
240 for_each_child_of_node(tx_node, q_node) {
241 if (queue >= plat->tx_queues_to_use)
242 break;
243
244 if (of_property_read_u32(q_node, "snps,weight",
245 &plat->tx_queues_cfg[queue].weight))
246 plat->tx_queues_cfg[queue].weight = 0x10 + queue;
247
248 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) {
249 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
250 } else if (of_property_read_bool(q_node,
251 "snps,avb-algorithm")) {
252 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
253
254 /* Credit Base Shaper parameters used by AVB */
255 if (of_property_read_u32(q_node, "snps,send_slope",
256 &plat->tx_queues_cfg[queue].send_slope))
257 plat->tx_queues_cfg[queue].send_slope = 0x0;
258 if (of_property_read_u32(q_node, "snps,idle_slope",
259 &plat->tx_queues_cfg[queue].idle_slope))
260 plat->tx_queues_cfg[queue].idle_slope = 0x0;
261 if (of_property_read_u32(q_node, "snps,high_credit",
262 &plat->tx_queues_cfg[queue].high_credit))
263 plat->tx_queues_cfg[queue].high_credit = 0x0;
264 if (of_property_read_u32(q_node, "snps,low_credit",
265 &plat->tx_queues_cfg[queue].low_credit))
266 plat->tx_queues_cfg[queue].low_credit = 0x0;
267 } else {
268 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
269 }
270
271 if (of_property_read_u32(q_node, "snps,priority",
272 &plat->tx_queues_cfg[queue].prio)) {
273 plat->tx_queues_cfg[queue].prio = 0;
274 plat->tx_queues_cfg[queue].use_prio = false;
275 } else {
276 plat->tx_queues_cfg[queue].use_prio = true;
277 }
278
279 plat->tx_queues_cfg[queue].coe_unsupported =
280 of_property_read_bool(q_node, "snps,coe-unsupported");
281
282 queue++;
283 }
284 if (queue != plat->tx_queues_to_use) {
285 ret = -EINVAL;
286 dev_err(&pdev->dev, "Not all TX queues were configured\n");
287 goto out;
288 }
289
290 out:
291 of_node_put(rx_node);
292 of_node_put(tx_node);
293 of_node_put(q_node);
294
295 return ret;
296 }
297
298 /**
299 * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
300 * @plat: driver data platform structure
301 * @np: device tree node
302 * @dev: device pointer
303 * Description:
304 * The mdio bus will be allocated in case of a phy transceiver is on board;
305 * it will be NULL if the fixed-link is configured.
306 * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated
307 * in any case (for DSA, mdio must be registered even if fixed-link).
308 * The table below sums the supported configurations:
309 * -------------------------------
310 * snps,phy-addr | Y
311 * -------------------------------
312 * phy-handle | Y
313 * -------------------------------
314 * fixed-link | N
315 * -------------------------------
316 * snps,dwmac-mdio |
317 * even if | Y
318 * fixed-link |
319 * -------------------------------
320 *
321 * It returns 0 in case of success otherwise -ENODEV.
322 */
stmmac_dt_phy(struct plat_stmmacenet_data * plat,struct device_node * np,struct device * dev)323 static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
324 struct device_node *np, struct device *dev)
325 {
326 bool mdio = !of_phy_is_fixed_link(np);
327 static const struct of_device_id need_mdio_ids[] = {
328 { .compatible = "snps,dwc-qos-ethernet-4.10" },
329 {},
330 };
331
332 if (of_match_node(need_mdio_ids, np)) {
333 plat->mdio_node = of_get_child_by_name(np, "mdio");
334 } else {
335 /**
336 * If snps,dwmac-mdio is passed from DT, always register
337 * the MDIO
338 */
339 for_each_child_of_node(np, plat->mdio_node) {
340 if (of_device_is_compatible(plat->mdio_node,
341 "snps,dwmac-mdio"))
342 break;
343 }
344 }
345
346 if (plat->mdio_node) {
347 dev_dbg(dev, "Found MDIO subnode\n");
348 mdio = true;
349 }
350
351 if (mdio) {
352 plat->mdio_bus_data =
353 devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data),
354 GFP_KERNEL);
355 if (!plat->mdio_bus_data)
356 return -ENOMEM;
357
358 plat->mdio_bus_data->needs_reset = true;
359 }
360
361 return 0;
362 }
363
364 /**
365 * stmmac_of_get_mac_mode - retrieves the interface of the MAC
366 * @np: - device-tree node
367 * Description:
368 * Similar to `of_get_phy_mode()`, this function will retrieve (from
369 * the device-tree) the interface mode on the MAC side. This assumes
370 * that there is mode converter in-between the MAC & PHY
371 * (e.g. GMII-to-RGMII).
372 */
stmmac_of_get_mac_mode(struct device_node * np)373 static int stmmac_of_get_mac_mode(struct device_node *np)
374 {
375 const char *pm;
376 int err, i;
377
378 err = of_property_read_string(np, "mac-mode", &pm);
379 if (err < 0)
380 return err;
381
382 for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) {
383 if (!strcasecmp(pm, phy_modes(i)))
384 return i;
385 }
386
387 return -ENODEV;
388 }
389
390 /**
391 * stmmac_probe_config_dt - parse device-tree driver parameters
392 * @pdev: platform_device structure
393 * @mac: MAC address to use
394 * Description:
395 * this function is to read the driver parameters from device-tree and
396 * set some private fields that will be used by the main at runtime.
397 */
398 struct plat_stmmacenet_data *
stmmac_probe_config_dt(struct platform_device * pdev,u8 * mac)399 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
400 {
401 struct device_node *np = pdev->dev.of_node;
402 struct plat_stmmacenet_data *plat;
403 struct stmmac_dma_cfg *dma_cfg;
404 int phy_mode;
405 void *ret;
406 int rc;
407
408 plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
409 if (!plat)
410 return ERR_PTR(-ENOMEM);
411
412 rc = of_get_mac_address(np, mac);
413 if (rc) {
414 if (rc == -EPROBE_DEFER)
415 return ERR_PTR(rc);
416
417 eth_zero_addr(mac);
418 }
419
420 phy_mode = device_get_phy_mode(&pdev->dev);
421 if (phy_mode < 0)
422 return ERR_PTR(phy_mode);
423
424 plat->phy_interface = phy_mode;
425 rc = stmmac_of_get_mac_mode(np);
426 plat->mac_interface = rc < 0 ? plat->phy_interface : rc;
427
428 /* Some wrapper drivers still rely on phy_node. Let's save it while
429 * they are not converted to phylink. */
430 plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
431
432 /* PHYLINK automatically parses the phy-handle property */
433 plat->port_node = of_fwnode_handle(np);
434
435 /* Get max speed of operation from device tree */
436 of_property_read_u32(np, "max-speed", &plat->max_speed);
437
438 plat->bus_id = of_alias_get_id(np, "ethernet");
439 if (plat->bus_id < 0)
440 plat->bus_id = 0;
441
442 /* Default to phy auto-detection */
443 plat->phy_addr = -1;
444
445 /* Default to get clk_csr from stmmac_clk_csr_set(),
446 * or get clk_csr from device tree.
447 */
448 plat->clk_csr = -1;
449 if (of_property_read_u32(np, "snps,clk-csr", &plat->clk_csr))
450 of_property_read_u32(np, "clk_csr", &plat->clk_csr);
451
452 /* "snps,phy-addr" is not a standard property. Mark it as deprecated
453 * and warn of its use. Remove this when phy node support is added.
454 */
455 if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
456 dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
457
458 /* To Configure PHY by using all device-tree supported properties */
459 rc = stmmac_dt_phy(plat, np, &pdev->dev);
460 if (rc)
461 return ERR_PTR(rc);
462
463 of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
464
465 of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size);
466
467 plat->force_sf_dma_mode =
468 of_property_read_bool(np, "snps,force_sf_dma_mode");
469
470 if (of_property_read_bool(np, "snps,en-tx-lpi-clockgating"))
471 plat->flags |= STMMAC_FLAG_EN_TX_LPI_CLOCKGATING;
472
473 /* Set the maxmtu to a default of JUMBO_LEN in case the
474 * parameter is not present in the device tree.
475 */
476 plat->maxmtu = JUMBO_LEN;
477
478 /* Set default value for multicast hash bins */
479 plat->multicast_filter_bins = HASH_TABLE_SIZE;
480
481 /* Set default value for unicast filter entries */
482 plat->unicast_filter_entries = 1;
483
484 /*
485 * Currently only the properties needed on SPEAr600
486 * are provided. All other properties should be added
487 * once needed on other platforms.
488 */
489 if (of_device_is_compatible(np, "st,spear600-gmac") ||
490 of_device_is_compatible(np, "snps,dwmac-3.50a") ||
491 of_device_is_compatible(np, "snps,dwmac-3.70a") ||
492 of_device_is_compatible(np, "snps,dwmac")) {
493 /* Note that the max-frame-size parameter as defined in the
494 * ePAPR v1.1 spec is defined as max-frame-size, it's
495 * actually used as the IEEE definition of MAC Client
496 * data, or MTU. The ePAPR specification is confusing as
497 * the definition is max-frame-size, but usage examples
498 * are clearly MTUs
499 */
500 of_property_read_u32(np, "max-frame-size", &plat->maxmtu);
501 of_property_read_u32(np, "snps,multicast-filter-bins",
502 &plat->multicast_filter_bins);
503 of_property_read_u32(np, "snps,perfect-filter-entries",
504 &plat->unicast_filter_entries);
505 plat->unicast_filter_entries = dwmac1000_validate_ucast_entries(
506 &pdev->dev, plat->unicast_filter_entries);
507 plat->multicast_filter_bins = dwmac1000_validate_mcast_bins(
508 &pdev->dev, plat->multicast_filter_bins);
509 plat->has_gmac = 1;
510 plat->pmt = 1;
511 }
512
513 if (of_device_is_compatible(np, "snps,dwmac-3.40a")) {
514 plat->has_gmac = 1;
515 plat->enh_desc = 1;
516 plat->tx_coe = 1;
517 plat->bugged_jumbo = 1;
518 plat->pmt = 1;
519 }
520
521 if (of_device_is_compatible(np, "snps,dwmac-4.00") ||
522 of_device_is_compatible(np, "snps,dwmac-4.10a") ||
523 of_device_is_compatible(np, "snps,dwmac-4.20a") ||
524 of_device_is_compatible(np, "snps,dwmac-5.10a") ||
525 of_device_is_compatible(np, "snps,dwmac-5.20")) {
526 plat->has_gmac4 = 1;
527 plat->has_gmac = 0;
528 plat->pmt = 1;
529 if (of_property_read_bool(np, "snps,tso"))
530 plat->flags |= STMMAC_FLAG_TSO_EN;
531 }
532
533 if (of_device_is_compatible(np, "snps,dwmac-3.610") ||
534 of_device_is_compatible(np, "snps,dwmac-3.710")) {
535 plat->enh_desc = 1;
536 plat->bugged_jumbo = 1;
537 plat->force_sf_dma_mode = 1;
538 }
539
540 if (of_device_is_compatible(np, "snps,dwxgmac")) {
541 plat->has_xgmac = 1;
542 plat->pmt = 1;
543 if (of_property_read_bool(np, "snps,tso"))
544 plat->flags |= STMMAC_FLAG_TSO_EN;
545 }
546
547 dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
548 GFP_KERNEL);
549 if (!dma_cfg) {
550 stmmac_remove_config_dt(pdev, plat);
551 return ERR_PTR(-ENOMEM);
552 }
553 plat->dma_cfg = dma_cfg;
554
555 of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
556 if (!dma_cfg->pbl)
557 dma_cfg->pbl = DEFAULT_DMA_PBL;
558 of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl);
559 of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl);
560 dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8");
561
562 dma_cfg->aal = of_property_read_bool(np, "snps,aal");
563 dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
564 dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
565
566 plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
567 if (plat->force_thresh_dma_mode && plat->force_sf_dma_mode) {
568 plat->force_sf_dma_mode = 0;
569 dev_warn(&pdev->dev,
570 "force_sf_dma_mode is ignored if force_thresh_dma_mode is set.\n");
571 }
572
573 of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed);
574
575 plat->axi = stmmac_axi_setup(pdev);
576
577 rc = stmmac_mtl_setup(pdev, plat);
578 if (rc) {
579 stmmac_remove_config_dt(pdev, plat);
580 return ERR_PTR(rc);
581 }
582
583 /* clock setup */
584 if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
585 plat->stmmac_clk = devm_clk_get(&pdev->dev,
586 STMMAC_RESOURCE_NAME);
587 if (IS_ERR(plat->stmmac_clk)) {
588 dev_warn(&pdev->dev, "Cannot get CSR clock\n");
589 plat->stmmac_clk = NULL;
590 }
591 clk_prepare_enable(plat->stmmac_clk);
592 }
593
594 plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
595 if (IS_ERR(plat->pclk)) {
596 ret = plat->pclk;
597 goto error_pclk_get;
598 }
599 clk_prepare_enable(plat->pclk);
600
601 /* Fall-back to main clock in case of no PTP ref is passed */
602 plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref");
603 if (IS_ERR(plat->clk_ptp_ref)) {
604 plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk);
605 plat->clk_ptp_ref = NULL;
606 dev_info(&pdev->dev, "PTP uses main clock\n");
607 } else {
608 plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
609 dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
610 }
611
612 plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
613 STMMAC_RESOURCE_NAME);
614 if (IS_ERR(plat->stmmac_rst)) {
615 ret = plat->stmmac_rst;
616 goto error_hw_init;
617 }
618
619 plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
620 &pdev->dev, "ahb");
621 if (IS_ERR(plat->stmmac_ahb_rst)) {
622 ret = plat->stmmac_ahb_rst;
623 goto error_hw_init;
624 }
625
626 return plat;
627
628 error_hw_init:
629 clk_disable_unprepare(plat->pclk);
630 error_pclk_get:
631 clk_disable_unprepare(plat->stmmac_clk);
632
633 return ret;
634 }
635
devm_stmmac_remove_config_dt(void * data)636 static void devm_stmmac_remove_config_dt(void *data)
637 {
638 struct plat_stmmacenet_data *plat = data;
639
640 /* Platform data argument is unused */
641 stmmac_remove_config_dt(NULL, plat);
642 }
643
644 /**
645 * devm_stmmac_probe_config_dt
646 * @pdev: platform_device structure
647 * @mac: MAC address to use
648 * Description: Devres variant of stmmac_probe_config_dt(). Does not require
649 * the user to call stmmac_remove_config_dt() at driver detach.
650 */
651 struct plat_stmmacenet_data *
devm_stmmac_probe_config_dt(struct platform_device * pdev,u8 * mac)652 devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
653 {
654 struct plat_stmmacenet_data *plat;
655 int ret;
656
657 plat = stmmac_probe_config_dt(pdev, mac);
658 if (IS_ERR(plat))
659 return plat;
660
661 ret = devm_add_action_or_reset(&pdev->dev,
662 devm_stmmac_remove_config_dt, plat);
663 if (ret)
664 return ERR_PTR(ret);
665
666 return plat;
667 }
668
669 /**
670 * stmmac_remove_config_dt - undo the effects of stmmac_probe_config_dt()
671 * @pdev: platform_device structure
672 * @plat: driver data platform structure
673 *
674 * Release resources claimed by stmmac_probe_config_dt().
675 */
stmmac_remove_config_dt(struct platform_device * pdev,struct plat_stmmacenet_data * plat)676 void stmmac_remove_config_dt(struct platform_device *pdev,
677 struct plat_stmmacenet_data *plat)
678 {
679 clk_disable_unprepare(plat->stmmac_clk);
680 clk_disable_unprepare(plat->pclk);
681 of_node_put(plat->phy_node);
682 of_node_put(plat->mdio_node);
683 }
684 #else
685 struct plat_stmmacenet_data *
stmmac_probe_config_dt(struct platform_device * pdev,u8 * mac)686 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
687 {
688 return ERR_PTR(-EINVAL);
689 }
690
691 struct plat_stmmacenet_data *
devm_stmmac_probe_config_dt(struct platform_device * pdev,u8 * mac)692 devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
693 {
694 return ERR_PTR(-EINVAL);
695 }
696
stmmac_remove_config_dt(struct platform_device * pdev,struct plat_stmmacenet_data * plat)697 void stmmac_remove_config_dt(struct platform_device *pdev,
698 struct plat_stmmacenet_data *plat)
699 {
700 }
701 #endif /* CONFIG_OF */
702 EXPORT_SYMBOL_GPL(stmmac_probe_config_dt);
703 EXPORT_SYMBOL_GPL(devm_stmmac_probe_config_dt);
704 EXPORT_SYMBOL_GPL(stmmac_remove_config_dt);
705
stmmac_get_platform_resources(struct platform_device * pdev,struct stmmac_resources * stmmac_res)706 int stmmac_get_platform_resources(struct platform_device *pdev,
707 struct stmmac_resources *stmmac_res)
708 {
709 memset(stmmac_res, 0, sizeof(*stmmac_res));
710
711 /* Get IRQ information early to have an ability to ask for deferred
712 * probe if needed before we went too far with resource allocation.
713 */
714 stmmac_res->irq = platform_get_irq_byname(pdev, "macirq");
715 if (stmmac_res->irq < 0)
716 return stmmac_res->irq;
717
718 /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
719 * The external wake up irq can be passed through the platform code
720 * named as "eth_wake_irq"
721 *
722 * In case the wake up interrupt is not passed from the platform
723 * so the driver will continue to use the mac irq (ndev->irq)
724 */
725 stmmac_res->wol_irq =
726 platform_get_irq_byname_optional(pdev, "eth_wake_irq");
727 if (stmmac_res->wol_irq < 0) {
728 if (stmmac_res->wol_irq == -EPROBE_DEFER)
729 return -EPROBE_DEFER;
730 dev_info(&pdev->dev, "IRQ eth_wake_irq not found\n");
731 stmmac_res->wol_irq = stmmac_res->irq;
732 }
733
734 stmmac_res->lpi_irq =
735 platform_get_irq_byname_optional(pdev, "eth_lpi");
736 if (stmmac_res->lpi_irq < 0) {
737 if (stmmac_res->lpi_irq == -EPROBE_DEFER)
738 return -EPROBE_DEFER;
739 dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
740 }
741
742 stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
743
744 return PTR_ERR_OR_ZERO(stmmac_res->addr);
745 }
746 EXPORT_SYMBOL_GPL(stmmac_get_platform_resources);
747
748 /**
749 * stmmac_pltfr_init
750 * @pdev: pointer to the platform device
751 * @plat: driver data platform structure
752 * Description: Call the platform's init callback (if any) and propagate
753 * the return value.
754 */
stmmac_pltfr_init(struct platform_device * pdev,struct plat_stmmacenet_data * plat)755 int stmmac_pltfr_init(struct platform_device *pdev,
756 struct plat_stmmacenet_data *plat)
757 {
758 int ret = 0;
759
760 if (plat->init)
761 ret = plat->init(pdev, plat->bsp_priv);
762
763 return ret;
764 }
765 EXPORT_SYMBOL_GPL(stmmac_pltfr_init);
766
767 /**
768 * stmmac_pltfr_exit
769 * @pdev: pointer to the platform device
770 * @plat: driver data platform structure
771 * Description: Call the platform's exit callback (if any).
772 */
stmmac_pltfr_exit(struct platform_device * pdev,struct plat_stmmacenet_data * plat)773 void stmmac_pltfr_exit(struct platform_device *pdev,
774 struct plat_stmmacenet_data *plat)
775 {
776 if (plat->exit)
777 plat->exit(pdev, plat->bsp_priv);
778 }
779 EXPORT_SYMBOL_GPL(stmmac_pltfr_exit);
780
781 /**
782 * stmmac_pltfr_probe
783 * @pdev: platform device pointer
784 * @plat: driver data platform structure
785 * @res: stmmac resources structure
786 * Description: This calls the platform's init() callback and probes the
787 * stmmac driver.
788 */
stmmac_pltfr_probe(struct platform_device * pdev,struct plat_stmmacenet_data * plat,struct stmmac_resources * res)789 int stmmac_pltfr_probe(struct platform_device *pdev,
790 struct plat_stmmacenet_data *plat,
791 struct stmmac_resources *res)
792 {
793 int ret;
794
795 ret = stmmac_pltfr_init(pdev, plat);
796 if (ret)
797 return ret;
798
799 ret = stmmac_dvr_probe(&pdev->dev, plat, res);
800 if (ret) {
801 stmmac_pltfr_exit(pdev, plat);
802 return ret;
803 }
804
805 return ret;
806 }
807 EXPORT_SYMBOL_GPL(stmmac_pltfr_probe);
808
devm_stmmac_pltfr_remove(void * data)809 static void devm_stmmac_pltfr_remove(void *data)
810 {
811 struct platform_device *pdev = data;
812
813 stmmac_pltfr_remove(pdev);
814 }
815
816 /**
817 * devm_stmmac_pltfr_probe
818 * @pdev: pointer to the platform device
819 * @plat: driver data platform structure
820 * @res: stmmac resources
821 * Description: Devres variant of stmmac_pltfr_probe(). Allows users to skip
822 * calling stmmac_pltfr_remove() on driver detach.
823 */
devm_stmmac_pltfr_probe(struct platform_device * pdev,struct plat_stmmacenet_data * plat,struct stmmac_resources * res)824 int devm_stmmac_pltfr_probe(struct platform_device *pdev,
825 struct plat_stmmacenet_data *plat,
826 struct stmmac_resources *res)
827 {
828 int ret;
829
830 ret = stmmac_pltfr_probe(pdev, plat, res);
831 if (ret)
832 return ret;
833
834 return devm_add_action_or_reset(&pdev->dev, devm_stmmac_pltfr_remove,
835 pdev);
836 }
837 EXPORT_SYMBOL_GPL(devm_stmmac_pltfr_probe);
838
839 /**
840 * stmmac_pltfr_remove
841 * @pdev: pointer to the platform device
842 * Description: This undoes the effects of stmmac_pltfr_probe() by removing the
843 * driver and calling the platform's exit() callback.
844 */
stmmac_pltfr_remove(struct platform_device * pdev)845 void stmmac_pltfr_remove(struct platform_device *pdev)
846 {
847 struct net_device *ndev = platform_get_drvdata(pdev);
848 struct stmmac_priv *priv = netdev_priv(ndev);
849 struct plat_stmmacenet_data *plat = priv->plat;
850
851 stmmac_dvr_remove(&pdev->dev);
852 stmmac_pltfr_exit(pdev, plat);
853 }
854 EXPORT_SYMBOL_GPL(stmmac_pltfr_remove);
855
856 /**
857 * stmmac_pltfr_suspend
858 * @dev: device pointer
859 * Description: this function is invoked when suspend the driver and it direcly
860 * call the main suspend function and then, if required, on some platform, it
861 * can call an exit helper.
862 */
stmmac_pltfr_suspend(struct device * dev)863 static int __maybe_unused stmmac_pltfr_suspend(struct device *dev)
864 {
865 int ret;
866 struct net_device *ndev = dev_get_drvdata(dev);
867 struct stmmac_priv *priv = netdev_priv(ndev);
868 struct platform_device *pdev = to_platform_device(dev);
869
870 ret = stmmac_suspend(dev);
871 stmmac_pltfr_exit(pdev, priv->plat);
872
873 return ret;
874 }
875
876 /**
877 * stmmac_pltfr_resume
878 * @dev: device pointer
879 * Description: this function is invoked when resume the driver before calling
880 * the main resume function, on some platforms, it can call own init helper
881 * if required.
882 */
stmmac_pltfr_resume(struct device * dev)883 static int __maybe_unused stmmac_pltfr_resume(struct device *dev)
884 {
885 struct net_device *ndev = dev_get_drvdata(dev);
886 struct stmmac_priv *priv = netdev_priv(ndev);
887 struct platform_device *pdev = to_platform_device(dev);
888 int ret;
889
890 ret = stmmac_pltfr_init(pdev, priv->plat);
891 if (ret)
892 return ret;
893
894 return stmmac_resume(dev);
895 }
896
stmmac_runtime_suspend(struct device * dev)897 static int __maybe_unused stmmac_runtime_suspend(struct device *dev)
898 {
899 struct net_device *ndev = dev_get_drvdata(dev);
900 struct stmmac_priv *priv = netdev_priv(ndev);
901
902 stmmac_bus_clks_config(priv, false);
903
904 return 0;
905 }
906
stmmac_runtime_resume(struct device * dev)907 static int __maybe_unused stmmac_runtime_resume(struct device *dev)
908 {
909 struct net_device *ndev = dev_get_drvdata(dev);
910 struct stmmac_priv *priv = netdev_priv(ndev);
911
912 return stmmac_bus_clks_config(priv, true);
913 }
914
stmmac_pltfr_noirq_suspend(struct device * dev)915 static int __maybe_unused stmmac_pltfr_noirq_suspend(struct device *dev)
916 {
917 struct net_device *ndev = dev_get_drvdata(dev);
918 struct stmmac_priv *priv = netdev_priv(ndev);
919 int ret;
920
921 if (!netif_running(ndev))
922 return 0;
923
924 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
925 /* Disable clock in case of PWM is off */
926 clk_disable_unprepare(priv->plat->clk_ptp_ref);
927
928 ret = pm_runtime_force_suspend(dev);
929 if (ret)
930 return ret;
931 }
932
933 return 0;
934 }
935
stmmac_pltfr_noirq_resume(struct device * dev)936 static int __maybe_unused stmmac_pltfr_noirq_resume(struct device *dev)
937 {
938 struct net_device *ndev = dev_get_drvdata(dev);
939 struct stmmac_priv *priv = netdev_priv(ndev);
940 int ret;
941
942 if (!netif_running(ndev))
943 return 0;
944
945 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
946 /* enable the clk previously disabled */
947 ret = pm_runtime_force_resume(dev);
948 if (ret)
949 return ret;
950
951 ret = clk_prepare_enable(priv->plat->clk_ptp_ref);
952 if (ret < 0) {
953 netdev_warn(priv->dev,
954 "failed to enable PTP reference clock: %pe\n",
955 ERR_PTR(ret));
956 return ret;
957 }
958 }
959
960 return 0;
961 }
962
963 const struct dev_pm_ops stmmac_pltfr_pm_ops = {
964 SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume)
965 SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL)
966 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_noirq_suspend, stmmac_pltfr_noirq_resume)
967 };
968 EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);
969
970 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support");
971 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
972 MODULE_LICENSE("GPL");
973