1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 	STB6100 Silicon Tuner
4 	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
5 
6 	Copyright (C) ST Microelectronics
7 
8 */
9 
10 #include <linux/init.h>
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/slab.h>
14 #include <linux/string.h>
15 
16 #include <media/dvb_frontend.h>
17 #include "stb6100.h"
18 
19 static unsigned int verbose;
20 module_param(verbose, int, 0644);
21 
22 /* Max transfer size done by I2C transfer functions */
23 #define MAX_XFER_SIZE  64
24 
25 #define FE_ERROR		0
26 #define FE_NOTICE		1
27 #define FE_INFO			2
28 #define FE_DEBUG		3
29 
30 #define dprintk(x, y, z, format, arg...) do {						\
31 	if (z) {									\
32 		if	((x > FE_ERROR) && (x > y))					\
33 			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);		\
34 		else if	((x > FE_NOTICE) && (x > y))					\
35 			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
36 		else if ((x > FE_INFO) && (x > y))					\
37 			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);		\
38 		else if ((x > FE_DEBUG) && (x > y))					\
39 			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
40 	} else {									\
41 		if (x > y)								\
42 			printk(format, ##arg);						\
43 	}										\
44 } while (0)
45 
46 struct stb6100_lkup {
47 	u32 val_low;
48 	u32 val_high;
49 	u8   reg;
50 };
51 
52 static void stb6100_release(struct dvb_frontend *fe);
53 
54 static const struct stb6100_lkup lkup[] = {
55 	{       0,  950000, 0x0a },
56 	{  950000, 1000000, 0x0a },
57 	{ 1000000, 1075000, 0x0c },
58 	{ 1075000, 1200000, 0x00 },
59 	{ 1200000, 1300000, 0x01 },
60 	{ 1300000, 1370000, 0x02 },
61 	{ 1370000, 1470000, 0x04 },
62 	{ 1470000, 1530000, 0x05 },
63 	{ 1530000, 1650000, 0x06 },
64 	{ 1650000, 1800000, 0x08 },
65 	{ 1800000, 1950000, 0x0a },
66 	{ 1950000, 2150000, 0x0c },
67 	{ 2150000, 9999999, 0x0c },
68 	{       0,       0, 0x00 }
69 };
70 
71 /* Register names for easy debugging.	*/
72 static const char *stb6100_regnames[] = {
73 	[STB6100_LD]		= "LD",
74 	[STB6100_VCO]		= "VCO",
75 	[STB6100_NI]		= "NI",
76 	[STB6100_NF_LSB]	= "NF",
77 	[STB6100_K]		= "K",
78 	[STB6100_G]		= "G",
79 	[STB6100_F]		= "F",
80 	[STB6100_DLB]		= "DLB",
81 	[STB6100_TEST1]		= "TEST1",
82 	[STB6100_FCCK]		= "FCCK",
83 	[STB6100_LPEN]		= "LPEN",
84 	[STB6100_TEST3]		= "TEST3",
85 };
86 
87 /* Template for normalisation, i.e. setting unused or undocumented
88  * bits as required according to the documentation.
89  */
90 struct stb6100_regmask {
91 	u8 mask;
92 	u8 set;
93 };
94 
95 static const struct stb6100_regmask stb6100_template[] = {
96 	[STB6100_LD]		= { 0xff, 0x00 },
97 	[STB6100_VCO]		= { 0xff, 0x00 },
98 	[STB6100_NI]		= { 0xff, 0x00 },
99 	[STB6100_NF_LSB]	= { 0xff, 0x00 },
100 	[STB6100_K]		= { 0xc7, 0x38 },
101 	[STB6100_G]		= { 0xef, 0x10 },
102 	[STB6100_F]		= { 0x1f, 0xc0 },
103 	[STB6100_DLB]		= { 0x38, 0xc4 },
104 	[STB6100_TEST1]		= { 0x00, 0x8f },
105 	[STB6100_FCCK]		= { 0x40, 0x0d },
106 	[STB6100_LPEN]		= { 0xf0, 0x0b },
107 	[STB6100_TEST3]		= { 0x00, 0xde },
108 };
109 
110 /*
111  * Currently unused. Some boards might need it in the future
112  */
stb6100_normalise_regs(u8 regs[])113 static __always_unused inline void stb6100_normalise_regs(u8 regs[])
114 {
115 	int i;
116 
117 	for (i = 0; i < STB6100_NUMREGS; i++)
118 		regs[i] = (regs[i] & stb6100_template[i].mask) | stb6100_template[i].set;
119 }
120 
stb6100_read_regs(struct stb6100_state * state,u8 regs[])121 static int stb6100_read_regs(struct stb6100_state *state, u8 regs[])
122 {
123 	int rc;
124 	struct i2c_msg msg = {
125 		.addr	= state->config->tuner_address,
126 		.flags	= I2C_M_RD,
127 		.buf	= regs,
128 		.len	= STB6100_NUMREGS
129 	};
130 
131 	rc = i2c_transfer(state->i2c, &msg, 1);
132 	if (unlikely(rc != 1)) {
133 		dprintk(verbose, FE_ERROR, 1, "Read (0x%x) err, rc=[%d]",
134 			state->config->tuner_address, rc);
135 
136 		return -EREMOTEIO;
137 	}
138 	if (unlikely(verbose > FE_DEBUG)) {
139 		int i;
140 
141 		dprintk(verbose, FE_DEBUG, 1, "    Read from 0x%02x", state->config->tuner_address);
142 		for (i = 0; i < STB6100_NUMREGS; i++)
143 			dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[i], regs[i]);
144 	}
145 	return 0;
146 }
147 
stb6100_read_reg(struct stb6100_state * state,u8 reg)148 static int stb6100_read_reg(struct stb6100_state *state, u8 reg)
149 {
150 	u8 regs[STB6100_NUMREGS];
151 
152 	struct i2c_msg msg = {
153 		.addr	= state->config->tuner_address + reg,
154 		.flags	= I2C_M_RD,
155 		.buf	= regs,
156 		.len	= 1
157 	};
158 
159 	i2c_transfer(state->i2c, &msg, 1);
160 
161 	if (unlikely(reg >= STB6100_NUMREGS)) {
162 		dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
163 		return -EINVAL;
164 	}
165 	if (unlikely(verbose > FE_DEBUG)) {
166 		dprintk(verbose, FE_DEBUG, 1, "    Read from 0x%02x", state->config->tuner_address);
167 		dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[reg], regs[0]);
168 	}
169 
170 	return (unsigned int)regs[0];
171 }
172 
stb6100_write_reg_range(struct stb6100_state * state,u8 buf[],int start,int len)173 static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len)
174 {
175 	int rc;
176 	u8 cmdbuf[MAX_XFER_SIZE];
177 	struct i2c_msg msg = {
178 		.addr	= state->config->tuner_address,
179 		.flags	= 0,
180 		.buf	= cmdbuf,
181 		.len	= len + 1
182 	};
183 
184 	if (1 + len > sizeof(cmdbuf)) {
185 		printk(KERN_WARNING
186 		       "%s: i2c wr: len=%d is too big!\n",
187 		       KBUILD_MODNAME, len);
188 		return -EINVAL;
189 	}
190 
191 	if (unlikely(start < 1 || start + len > STB6100_NUMREGS)) {
192 		dprintk(verbose, FE_ERROR, 1, "Invalid register range %d:%d",
193 			start, len);
194 		return -EINVAL;
195 	}
196 	memcpy(&cmdbuf[1], buf, len);
197 	cmdbuf[0] = start;
198 
199 	if (unlikely(verbose > FE_DEBUG)) {
200 		int i;
201 
202 		dprintk(verbose, FE_DEBUG, 1, "    Write @ 0x%02x: [%d:%d]", state->config->tuner_address, start, len);
203 		for (i = 0; i < len; i++)
204 			dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[start + i], buf[i]);
205 	}
206 	rc = i2c_transfer(state->i2c, &msg, 1);
207 	if (unlikely(rc != 1)) {
208 		dprintk(verbose, FE_ERROR, 1, "(0x%x) write err [%d:%d], rc=[%d]",
209 			(unsigned int)state->config->tuner_address, start, len,	rc);
210 		return -EREMOTEIO;
211 	}
212 	return 0;
213 }
214 
stb6100_write_reg(struct stb6100_state * state,u8 reg,u8 data)215 static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data)
216 {
217 	u8 tmp = data; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
218 
219 	if (unlikely(reg >= STB6100_NUMREGS)) {
220 		dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
221 		return -EREMOTEIO;
222 	}
223 	tmp = (tmp & stb6100_template[reg].mask) | stb6100_template[reg].set;
224 	return stb6100_write_reg_range(state, &tmp, reg, 1);
225 }
226 
227 
stb6100_get_status(struct dvb_frontend * fe,u32 * status)228 static int stb6100_get_status(struct dvb_frontend *fe, u32 *status)
229 {
230 	int rc;
231 	struct stb6100_state *state = fe->tuner_priv;
232 
233 	rc = stb6100_read_reg(state, STB6100_LD);
234 	if (rc < 0) {
235 		dprintk(verbose, FE_ERROR, 1, "%s failed", __func__);
236 		return rc;
237 	}
238 	return (rc & STB6100_LD_LOCK) ? TUNER_STATUS_LOCKED : 0;
239 }
240 
stb6100_get_bandwidth(struct dvb_frontend * fe,u32 * bandwidth)241 static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
242 {
243 	int rc;
244 	u8 f;
245 	u32 bw;
246 	struct stb6100_state *state = fe->tuner_priv;
247 
248 	rc = stb6100_read_reg(state, STB6100_F);
249 	if (rc < 0)
250 		return rc;
251 	f = rc & STB6100_F_F;
252 
253 	bw = (f + 5) * 2000;	/* x2 for ZIF	*/
254 
255 	*bandwidth = state->bandwidth = bw * 1000;
256 	dprintk(verbose, FE_DEBUG, 1, "bandwidth = %u Hz", state->bandwidth);
257 	return 0;
258 }
259 
stb6100_set_bandwidth(struct dvb_frontend * fe,u32 bandwidth)260 static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
261 {
262 	u32 tmp;
263 	int rc;
264 	struct stb6100_state *state = fe->tuner_priv;
265 
266 	dprintk(verbose, FE_DEBUG, 1, "set bandwidth to %u Hz", bandwidth);
267 
268 	bandwidth /= 2; /* ZIF */
269 
270 	if (bandwidth >= 36000000)	/* F[4:0] BW/2 max =31+5=36 mhz for F=31	*/
271 		tmp = 31;
272 	else if (bandwidth <= 5000000)	/* bw/2 min = 5Mhz for F=0			*/
273 		tmp = 0;
274 	else				/* if 5 < bw/2 < 36				*/
275 		tmp = (bandwidth + 500000) / 1000000 - 5;
276 
277 	/* Turn on LPF bandwidth setting clock control,
278 	 * set bandwidth, wait 10ms, turn off.
279 	 */
280 	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK);
281 	if (rc < 0)
282 		return rc;
283 	rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp);
284 	if (rc < 0)
285 		return rc;
286 
287 	msleep(5);  /*  This is dangerous as another (related) thread may start */
288 
289 	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
290 	if (rc < 0)
291 		return rc;
292 
293 	msleep(10);  /*  This is dangerous as another (related) thread may start */
294 
295 	return 0;
296 }
297 
stb6100_get_frequency(struct dvb_frontend * fe,u32 * frequency)298 static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
299 {
300 	int rc;
301 	u32 nint, nfrac, fvco;
302 	int psd2, odiv;
303 	struct stb6100_state *state = fe->tuner_priv;
304 	u8 regs[STB6100_NUMREGS];
305 
306 	rc = stb6100_read_regs(state, regs);
307 	if (rc < 0)
308 		return rc;
309 
310 	odiv = (regs[STB6100_VCO] & STB6100_VCO_ODIV) >> STB6100_VCO_ODIV_SHIFT;
311 	psd2 = (regs[STB6100_K] & STB6100_K_PSD2) >> STB6100_K_PSD2_SHIFT;
312 	nint = regs[STB6100_NI];
313 	nfrac = ((regs[STB6100_K] & STB6100_K_NF_MSB) << 8) | regs[STB6100_NF_LSB];
314 	fvco = (nfrac * state->reference >> (9 - psd2)) + (nint * state->reference << psd2);
315 	*frequency = state->frequency = fvco >> (odiv + 1);
316 
317 	dprintk(verbose, FE_DEBUG, 1,
318 		"frequency = %u kHz, odiv = %u, psd2 = %u, fxtal = %u kHz, fvco = %u kHz, N(I) = %u, N(F) = %u",
319 		state->frequency, odiv, psd2, state->reference,	fvco, nint, nfrac);
320 	return 0;
321 }
322 
323 
stb6100_set_frequency(struct dvb_frontend * fe,u32 frequency)324 static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
325 {
326 	int rc;
327 	const struct stb6100_lkup *ptr;
328 	struct stb6100_state *state = fe->tuner_priv;
329 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
330 
331 	u32 srate = 0, fvco, nint, nfrac;
332 	u8 regs[STB6100_NUMREGS];
333 	u8 g, psd2, odiv;
334 
335 	dprintk(verbose, FE_DEBUG, 1, "Version 2010-8-14 13:51");
336 
337 	if (fe->ops.get_frontend) {
338 		dprintk(verbose, FE_DEBUG, 1, "Get frontend parameters");
339 		fe->ops.get_frontend(fe, p);
340 	}
341 	srate = p->symbol_rate;
342 
343 	/* Set up tuner cleanly, LPF calibration on */
344 	rc = stb6100_write_reg(state, STB6100_FCCK, 0x4d | STB6100_FCCK_FCCK);
345 	if (rc < 0)
346 		return rc;  /* allow LPF calibration */
347 
348 	/* PLL Loop disabled, bias on, VCO on, synth on */
349 	regs[STB6100_LPEN] = 0xeb;
350 	rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
351 	if (rc < 0)
352 		return rc;
353 
354 	/* Program the registers with their data values */
355 
356 	/* VCO divide ratio (LO divide ratio, VCO prescaler enable).	*/
357 	if (frequency <= 1075000)
358 		odiv = 1;
359 	else
360 		odiv = 0;
361 
362 	/* VCO enabled, search clock off as per LL3.7, 3.4.1 */
363 	regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
364 
365 	/* OSM	*/
366 	for (ptr = lkup;
367 	     (ptr->val_high != 0) && !CHKRANGE(frequency, ptr->val_low, ptr->val_high);
368 	     ptr++);
369 
370 	if (ptr->val_high == 0) {
371 		printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency);
372 		return -EINVAL;
373 	}
374 	regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_OSM) | ptr->reg;
375 	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
376 	if (rc < 0)
377 		return rc;
378 
379 	if ((frequency > 1075000) && (frequency <= 1325000))
380 		psd2 = 0;
381 	else
382 		psd2 = 1;
383 	/* F(VCO) = F(LO) * (ODIV == 0 ? 2 : 4)			*/
384 	fvco = frequency << (1 + odiv);
385 	/* N(I) = floor(f(VCO) / (f(XTAL) * (PSD2 ? 2 : 1)))	*/
386 	nint = fvco / (state->reference << psd2);
387 	/* N(F) = round(f(VCO) / f(XTAL) * (PSD2 ? 2 : 1) - N(I)) * 2 ^ 9	*/
388 	nfrac = DIV_ROUND_CLOSEST((fvco - (nint * state->reference << psd2))
389 					 << (9 - psd2), state->reference);
390 
391 	/* NI */
392 	regs[STB6100_NI] = nint;
393 	rc = stb6100_write_reg(state, STB6100_NI, regs[STB6100_NI]);
394 	if (rc < 0)
395 		return rc;
396 
397 	/* NF */
398 	regs[STB6100_NF_LSB] = nfrac;
399 	rc = stb6100_write_reg(state, STB6100_NF_LSB, regs[STB6100_NF_LSB]);
400 	if (rc < 0)
401 		return rc;
402 
403 	/* K */
404 	regs[STB6100_K] = (0x38 & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
405 	regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
406 	rc = stb6100_write_reg(state, STB6100_K, regs[STB6100_K]);
407 	if (rc < 0)
408 		return rc;
409 
410 	/* G Baseband gain. */
411 	if (srate >= 15000000)
412 		g = 9;  /*  +4 dB */
413 	else if (srate >= 5000000)
414 		g = 11; /*  +8 dB */
415 	else
416 		g = 14; /* +14 dB */
417 
418 	regs[STB6100_G] = (0x10 & ~STB6100_G_G) | g;
419 	regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
420 	regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
421 	rc = stb6100_write_reg(state, STB6100_G, regs[STB6100_G]);
422 	if (rc < 0)
423 		return rc;
424 
425 	/* F we don't write as it is set up in BW set */
426 
427 	/* DLB set DC servo loop BW to 160Hz (LLA 3.8 / 2.1) */
428 	regs[STB6100_DLB] = 0xcc;
429 	rc = stb6100_write_reg(state, STB6100_DLB, regs[STB6100_DLB]);
430 	if (rc < 0)
431 		return rc;
432 
433 	dprintk(verbose, FE_DEBUG, 1,
434 		"frequency = %u, srate = %u, g = %u, odiv = %u, psd2 = %u, fxtal = %u, osm = %u, fvco = %u, N(I) = %u, N(F) = %u",
435 		frequency, srate, (unsigned int)g, (unsigned int)odiv,
436 		(unsigned int)psd2, state->reference,
437 		ptr->reg, fvco, nint, nfrac);
438 
439 	/* Set up the test registers */
440 	regs[STB6100_TEST1] = 0x8f;
441 	rc = stb6100_write_reg(state, STB6100_TEST1, regs[STB6100_TEST1]);
442 	if (rc < 0)
443 		return rc;
444 	regs[STB6100_TEST3] = 0xde;
445 	rc = stb6100_write_reg(state, STB6100_TEST3, regs[STB6100_TEST3]);
446 	if (rc < 0)
447 		return rc;
448 
449 	/* Bring up tuner according to LLA 3.7 3.4.1, step 2 */
450 	regs[STB6100_LPEN] = 0xfb; /* PLL Loop enabled, bias on, VCO on, synth on */
451 	rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
452 	if (rc < 0)
453 		return rc;
454 
455 	msleep(2);
456 
457 	/* Bring up tuner according to LLA 3.7 3.4.1, step 3 */
458 	regs[STB6100_VCO] &= ~STB6100_VCO_OCK;		/* VCO fast search		*/
459 	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
460 	if (rc < 0)
461 		return rc;
462 
463 	msleep(10);  /*  This is dangerous as another (related) thread may start */ /* wait for LO to lock */
464 
465 	regs[STB6100_VCO] &= ~STB6100_VCO_OSCH;		/* vco search disabled		*/
466 	regs[STB6100_VCO] |= STB6100_VCO_OCK;		/* search clock off		*/
467 	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
468 	if (rc < 0)
469 		return rc;
470 
471 	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
472 	if (rc < 0)
473 		return rc;  /* Stop LPF calibration */
474 
475 	msleep(10);  /*  This is dangerous as another (related) thread may start */
476 		     /* wait for stabilisation, (should not be necessary)		*/
477 	return 0;
478 }
479 
stb6100_sleep(struct dvb_frontend * fe)480 static int stb6100_sleep(struct dvb_frontend *fe)
481 {
482 	/* TODO: power down	*/
483 	return 0;
484 }
485 
stb6100_init(struct dvb_frontend * fe)486 static int stb6100_init(struct dvb_frontend *fe)
487 {
488 	struct stb6100_state *state = fe->tuner_priv;
489 	int refclk = 27000000; /* Hz */
490 
491 	/*
492 	 * iqsense = 1
493 	 * tunerstep = 125000
494 	 */
495 	state->bandwidth        = 36000000;		/* Hz	*/
496 	state->reference	= refclk / 1000;	/* kHz	*/
497 
498 	/* Set default bandwidth. Modified, PN 13-May-10	*/
499 	return 0;
500 }
501 
stb6100_set_params(struct dvb_frontend * fe)502 static int stb6100_set_params(struct dvb_frontend *fe)
503 {
504 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
505 
506 	if (c->frequency > 0)
507 		stb6100_set_frequency(fe, c->frequency);
508 
509 	if (c->bandwidth_hz > 0)
510 		stb6100_set_bandwidth(fe, c->bandwidth_hz);
511 
512 	return 0;
513 }
514 
515 static const struct dvb_tuner_ops stb6100_ops = {
516 	.info = {
517 		.name			= "STB6100 Silicon Tuner",
518 		.frequency_min_hz	=  950 * MHz,
519 		.frequency_max_hz	= 2150 * MHz,
520 	},
521 
522 	.init		= stb6100_init,
523 	.sleep          = stb6100_sleep,
524 	.get_status	= stb6100_get_status,
525 	.set_params	= stb6100_set_params,
526 	.get_frequency  = stb6100_get_frequency,
527 	.get_bandwidth  = stb6100_get_bandwidth,
528 	.release	= stb6100_release
529 };
530 
stb6100_attach(struct dvb_frontend * fe,const struct stb6100_config * config,struct i2c_adapter * i2c)531 struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe,
532 				    const struct stb6100_config *config,
533 				    struct i2c_adapter *i2c)
534 {
535 	struct stb6100_state *state = NULL;
536 
537 	state = kzalloc(sizeof (struct stb6100_state), GFP_KERNEL);
538 	if (!state)
539 		return NULL;
540 
541 	state->config		= config;
542 	state->i2c		= i2c;
543 	state->frontend		= fe;
544 	state->reference	= config->refclock / 1000; /* kHz */
545 	fe->tuner_priv		= state;
546 	fe->ops.tuner_ops	= stb6100_ops;
547 
548 	printk("%s: Attaching STB6100 \n", __func__);
549 	return fe;
550 }
551 
stb6100_release(struct dvb_frontend * fe)552 static void stb6100_release(struct dvb_frontend *fe)
553 {
554 	struct stb6100_state *state = fe->tuner_priv;
555 
556 	fe->tuner_priv = NULL;
557 	kfree(state);
558 }
559 
560 EXPORT_SYMBOL_GPL(stb6100_attach);
561 MODULE_PARM_DESC(verbose, "Set Verbosity level");
562 
563 MODULE_AUTHOR("Manu Abraham");
564 MODULE_DESCRIPTION("STB6100 Silicon tuner");
565 MODULE_LICENSE("GPL");
566