1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * SLIM core rproc driver
4 *
5 * Copyright (C) 2016 STMicroelectronics
6 *
7 * Author: Peter Griffin <peter.griffin@linaro.org>
8 */
9
10 #include <linux/clk.h>
11 #include <linux/err.h>
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/platform_device.h>
16 #include <linux/remoteproc.h>
17 #include <linux/remoteproc/st_slim_rproc.h>
18 #include "remoteproc_internal.h"
19
20 /* SLIM core registers */
21 #define SLIM_ID_OFST 0x0
22 #define SLIM_VER_OFST 0x4
23
24 #define SLIM_EN_OFST 0x8
25 #define SLIM_EN_RUN BIT(0)
26
27 #define SLIM_CLK_GATE_OFST 0xC
28 #define SLIM_CLK_GATE_DIS BIT(0)
29 #define SLIM_CLK_GATE_RESET BIT(2)
30
31 #define SLIM_SLIM_PC_OFST 0x20
32
33 /* DMEM registers */
34 #define SLIM_REV_ID_OFST 0x0
35 #define SLIM_REV_ID_MIN_MASK GENMASK(15, 8)
36 #define SLIM_REV_ID_MIN(id) ((id & SLIM_REV_ID_MIN_MASK) >> 8)
37 #define SLIM_REV_ID_MAJ_MASK GENMASK(23, 16)
38 #define SLIM_REV_ID_MAJ(id) ((id & SLIM_REV_ID_MAJ_MASK) >> 16)
39
40
41 /* peripherals registers */
42 #define SLIM_STBUS_SYNC_OFST 0xF88
43 #define SLIM_STBUS_SYNC_DIS BIT(0)
44
45 #define SLIM_INT_SET_OFST 0xFD4
46 #define SLIM_INT_CLR_OFST 0xFD8
47 #define SLIM_INT_MASK_OFST 0xFDC
48
49 #define SLIM_CMD_CLR_OFST 0xFC8
50 #define SLIM_CMD_MASK_OFST 0xFCC
51
52 static const char *mem_names[ST_SLIM_MEM_MAX] = {
53 [ST_SLIM_DMEM] = "dmem",
54 [ST_SLIM_IMEM] = "imem",
55 };
56
slim_clk_get(struct st_slim_rproc * slim_rproc,struct device * dev)57 static int slim_clk_get(struct st_slim_rproc *slim_rproc, struct device *dev)
58 {
59 int clk, err;
60
61 for (clk = 0; clk < ST_SLIM_MAX_CLK; clk++) {
62 slim_rproc->clks[clk] = of_clk_get(dev->of_node, clk);
63 if (IS_ERR(slim_rproc->clks[clk])) {
64 err = PTR_ERR(slim_rproc->clks[clk]);
65 if (err == -EPROBE_DEFER)
66 goto err_put_clks;
67 slim_rproc->clks[clk] = NULL;
68 break;
69 }
70 }
71
72 return 0;
73
74 err_put_clks:
75 while (--clk >= 0)
76 clk_put(slim_rproc->clks[clk]);
77
78 return err;
79 }
80
slim_clk_disable(struct st_slim_rproc * slim_rproc)81 static void slim_clk_disable(struct st_slim_rproc *slim_rproc)
82 {
83 int clk;
84
85 for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++)
86 clk_disable_unprepare(slim_rproc->clks[clk]);
87 }
88
slim_clk_enable(struct st_slim_rproc * slim_rproc)89 static int slim_clk_enable(struct st_slim_rproc *slim_rproc)
90 {
91 int clk, ret;
92
93 for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) {
94 ret = clk_prepare_enable(slim_rproc->clks[clk]);
95 if (ret)
96 goto err_disable_clks;
97 }
98
99 return 0;
100
101 err_disable_clks:
102 while (--clk >= 0)
103 clk_disable_unprepare(slim_rproc->clks[clk]);
104
105 return ret;
106 }
107
108 /*
109 * Remoteproc slim specific device handlers
110 */
slim_rproc_start(struct rproc * rproc)111 static int slim_rproc_start(struct rproc *rproc)
112 {
113 struct device *dev = &rproc->dev;
114 struct st_slim_rproc *slim_rproc = rproc->priv;
115 unsigned long hw_id, hw_ver, fw_rev;
116 u32 val;
117
118 /* disable CPU pipeline clock & reset CPU pipeline */
119 val = SLIM_CLK_GATE_DIS | SLIM_CLK_GATE_RESET;
120 writel(val, slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
121
122 /* disable SLIM core STBus sync */
123 writel(SLIM_STBUS_SYNC_DIS, slim_rproc->peri + SLIM_STBUS_SYNC_OFST);
124
125 /* enable cpu pipeline clock */
126 writel(!SLIM_CLK_GATE_DIS,
127 slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
128
129 /* clear int & cmd mailbox */
130 writel(~0U, slim_rproc->peri + SLIM_INT_CLR_OFST);
131 writel(~0U, slim_rproc->peri + SLIM_CMD_CLR_OFST);
132
133 /* enable all channels cmd & int */
134 writel(~0U, slim_rproc->peri + SLIM_INT_MASK_OFST);
135 writel(~0U, slim_rproc->peri + SLIM_CMD_MASK_OFST);
136
137 /* enable cpu */
138 writel(SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
139
140 hw_id = readl_relaxed(slim_rproc->slimcore + SLIM_ID_OFST);
141 hw_ver = readl_relaxed(slim_rproc->slimcore + SLIM_VER_OFST);
142
143 fw_rev = readl(slim_rproc->mem[ST_SLIM_DMEM].cpu_addr +
144 SLIM_REV_ID_OFST);
145
146 dev_info(dev, "fw rev:%ld.%ld on SLIM %ld.%ld\n",
147 SLIM_REV_ID_MAJ(fw_rev), SLIM_REV_ID_MIN(fw_rev),
148 hw_id, hw_ver);
149
150 return 0;
151 }
152
slim_rproc_stop(struct rproc * rproc)153 static int slim_rproc_stop(struct rproc *rproc)
154 {
155 struct st_slim_rproc *slim_rproc = rproc->priv;
156 u32 val;
157
158 /* mask all (cmd & int) channels */
159 writel(0UL, slim_rproc->peri + SLIM_INT_MASK_OFST);
160 writel(0UL, slim_rproc->peri + SLIM_CMD_MASK_OFST);
161
162 /* disable cpu pipeline clock */
163 writel(SLIM_CLK_GATE_DIS, slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
164
165 writel(!SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
166
167 val = readl(slim_rproc->slimcore + SLIM_EN_OFST);
168 if (val & SLIM_EN_RUN)
169 dev_warn(&rproc->dev, "Failed to disable SLIM");
170
171 dev_dbg(&rproc->dev, "slim stopped\n");
172
173 return 0;
174 }
175
slim_rproc_da_to_va(struct rproc * rproc,u64 da,size_t len,bool * is_iomem)176 static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
177 {
178 struct st_slim_rproc *slim_rproc = rproc->priv;
179 void *va = NULL;
180 int i;
181
182 for (i = 0; i < ST_SLIM_MEM_MAX; i++) {
183 if (da != slim_rproc->mem[i].bus_addr)
184 continue;
185
186 if (len <= slim_rproc->mem[i].size) {
187 /* __force to make sparse happy with type conversion */
188 va = (__force void *)slim_rproc->mem[i].cpu_addr;
189 break;
190 }
191 }
192
193 dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%zx va = 0x%pK\n",
194 da, len, va);
195
196 return va;
197 }
198
199 static const struct rproc_ops slim_rproc_ops = {
200 .start = slim_rproc_start,
201 .stop = slim_rproc_stop,
202 .da_to_va = slim_rproc_da_to_va,
203 .get_boot_addr = rproc_elf_get_boot_addr,
204 .load = rproc_elf_load_segments,
205 .sanity_check = rproc_elf_sanity_check,
206 };
207
208 /**
209 * st_slim_rproc_alloc() - allocate and initialise slim rproc
210 * @pdev: Pointer to the platform_device struct
211 * @fw_name: Name of firmware for rproc to use
212 *
213 * Function for allocating and initialising a slim rproc for use by
214 * device drivers whose IP is based around the SLIM core. It
215 * obtains and enables any clocks required by the SLIM core and also
216 * ioremaps the various IO.
217 *
218 * Return: st_slim_rproc pointer or PTR_ERR() on error.
219 */
220
st_slim_rproc_alloc(struct platform_device * pdev,char * fw_name)221 struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev,
222 char *fw_name)
223 {
224 struct device *dev = &pdev->dev;
225 struct st_slim_rproc *slim_rproc;
226 struct device_node *np = dev->of_node;
227 struct rproc *rproc;
228 struct resource *res;
229 int err, i;
230
231 if (!fw_name)
232 return ERR_PTR(-EINVAL);
233
234 if (!of_device_is_compatible(np, "st,slim-rproc"))
235 return ERR_PTR(-EINVAL);
236
237 rproc = rproc_alloc(dev, np->name, &slim_rproc_ops,
238 fw_name, sizeof(*slim_rproc));
239 if (!rproc)
240 return ERR_PTR(-ENOMEM);
241
242 rproc->has_iommu = false;
243
244 slim_rproc = rproc->priv;
245 slim_rproc->rproc = rproc;
246
247 /* get imem and dmem */
248 for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
249 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
250 mem_names[i]);
251
252 slim_rproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
253 if (IS_ERR(slim_rproc->mem[i].cpu_addr)) {
254 dev_err(&pdev->dev, "devm_ioremap_resource failed\n");
255 err = PTR_ERR(slim_rproc->mem[i].cpu_addr);
256 goto err;
257 }
258 slim_rproc->mem[i].bus_addr = res->start;
259 slim_rproc->mem[i].size = resource_size(res);
260 }
261
262 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "slimcore");
263 slim_rproc->slimcore = devm_ioremap_resource(dev, res);
264 if (IS_ERR(slim_rproc->slimcore)) {
265 dev_err(&pdev->dev, "failed to ioremap slimcore IO\n");
266 err = PTR_ERR(slim_rproc->slimcore);
267 goto err;
268 }
269
270 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "peripherals");
271 slim_rproc->peri = devm_ioremap_resource(dev, res);
272 if (IS_ERR(slim_rproc->peri)) {
273 dev_err(&pdev->dev, "failed to ioremap peripherals IO\n");
274 err = PTR_ERR(slim_rproc->peri);
275 goto err;
276 }
277
278 err = slim_clk_get(slim_rproc, dev);
279 if (err)
280 goto err;
281
282 err = slim_clk_enable(slim_rproc);
283 if (err) {
284 dev_err(dev, "Failed to enable clocks\n");
285 goto err_clk_put;
286 }
287
288 /* Register as a remoteproc device */
289 err = rproc_add(rproc);
290 if (err) {
291 dev_err(dev, "registration of slim remoteproc failed\n");
292 goto err_clk_dis;
293 }
294
295 return slim_rproc;
296
297 err_clk_dis:
298 slim_clk_disable(slim_rproc);
299 err_clk_put:
300 for (i = 0; i < ST_SLIM_MAX_CLK && slim_rproc->clks[i]; i++)
301 clk_put(slim_rproc->clks[i]);
302 err:
303 rproc_free(rproc);
304 return ERR_PTR(err);
305 }
306 EXPORT_SYMBOL(st_slim_rproc_alloc);
307
308 /**
309 * st_slim_rproc_put() - put slim rproc resources
310 * @slim_rproc: Pointer to the st_slim_rproc struct
311 *
312 * Function for calling respective _put() functions on slim_rproc resources.
313 *
314 */
st_slim_rproc_put(struct st_slim_rproc * slim_rproc)315 void st_slim_rproc_put(struct st_slim_rproc *slim_rproc)
316 {
317 int clk;
318
319 if (!slim_rproc)
320 return;
321
322 slim_clk_disable(slim_rproc);
323
324 for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++)
325 clk_put(slim_rproc->clks[clk]);
326
327 rproc_del(slim_rproc->rproc);
328 rproc_free(slim_rproc->rproc);
329 }
330 EXPORT_SYMBOL(st_slim_rproc_put);
331
332 MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
333 MODULE_DESCRIPTION("STMicroelectronics SLIM core rproc driver");
334 MODULE_LICENSE("GPL v2");
335