1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * SNI specific PCI support for RM200/RM300.
7 *
8 * Copyright (C) 1997 - 2000, 2003 Ralf Baechle <ralf@linux-mips.org>
9 */
10 #include <linux/kernel.h>
11 #include <linux/pci.h>
12 #include <linux/types.h>
13 #include <asm/sni.h>
14
15 /*
16 * It seems that on the RM200 only lower 3 bits of the 5 bit PCI device
17 * address are decoded. We therefore manually have to reject attempts at
18 * reading outside this range. Being on the paranoid side we only do this
19 * test for bus 0 and hope forwarding and decoding work properly for any
20 * subordinated busses.
21 *
22 * ASIC PCI only supports type 1 config cycles.
23 */
set_config_address(unsigned int busno,unsigned int devfn,int reg)24 static int set_config_address(unsigned int busno, unsigned int devfn, int reg)
25 {
26 if ((devfn > 255) || (reg > 255))
27 return PCIBIOS_BAD_REGISTER_NUMBER;
28
29 if (busno == 0 && devfn >= PCI_DEVFN(8, 0))
30 return PCIBIOS_DEVICE_NOT_FOUND;
31
32 *(volatile u32 *)PCIMT_CONFIG_ADDRESS =
33 ((busno & 0xff) << 16) |
34 ((devfn & 0xff) << 8) |
35 (reg & 0xfc);
36
37 return PCIBIOS_SUCCESSFUL;
38 }
39
pcimt_read(struct pci_bus * bus,unsigned int devfn,int reg,int size,u32 * val)40 static int pcimt_read(struct pci_bus *bus, unsigned int devfn, int reg,
41 int size, u32 * val)
42 {
43 int res;
44
45 if ((res = set_config_address(bus->number, devfn, reg)))
46 return res;
47
48 switch (size) {
49 case 1:
50 *val = inb(PCIMT_CONFIG_DATA + (reg & 3));
51 break;
52 case 2:
53 *val = inw(PCIMT_CONFIG_DATA + (reg & 2));
54 break;
55 case 4:
56 *val = inl(PCIMT_CONFIG_DATA);
57 break;
58 }
59
60 return 0;
61 }
62
pcimt_write(struct pci_bus * bus,unsigned int devfn,int reg,int size,u32 val)63 static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg,
64 int size, u32 val)
65 {
66 int res;
67
68 if ((res = set_config_address(bus->number, devfn, reg)))
69 return res;
70
71 switch (size) {
72 case 1:
73 outb(val, PCIMT_CONFIG_DATA + (reg & 3));
74 break;
75 case 2:
76 outw(val, PCIMT_CONFIG_DATA + (reg & 2));
77 break;
78 case 4:
79 outl(val, PCIMT_CONFIG_DATA);
80 break;
81 }
82
83 return 0;
84 }
85
86 struct pci_ops sni_pcimt_ops = {
87 .read = pcimt_read,
88 .write = pcimt_write,
89 };
90
pcit_set_config_address(unsigned int busno,unsigned int devfn,int reg)91 static int pcit_set_config_address(unsigned int busno, unsigned int devfn, int reg)
92 {
93 if ((devfn > 255) || (reg > 255) || (busno > 255))
94 return PCIBIOS_BAD_REGISTER_NUMBER;
95
96 outl((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8);
97 return PCIBIOS_SUCCESSFUL;
98 }
99
pcit_read(struct pci_bus * bus,unsigned int devfn,int reg,int size,u32 * val)100 static int pcit_read(struct pci_bus *bus, unsigned int devfn, int reg,
101 int size, u32 * val)
102 {
103 int res;
104
105 /*
106 * on bus 0 we need to check, whether there is a device answering
107 * for the devfn by doing a config write and checking the result. If
108 * we don't do it, we will get a data bus error
109 */
110 if (bus->number == 0) {
111 pcit_set_config_address(0, 0, 0x68);
112 outl(inl(0xcfc) | 0xc0000000, 0xcfc);
113 if ((res = pcit_set_config_address(0, devfn, 0)))
114 return res;
115 outl(0xffffffff, 0xcfc);
116 pcit_set_config_address(0, 0, 0x68);
117 if (inl(0xcfc) & 0x100000)
118 return PCIBIOS_DEVICE_NOT_FOUND;
119 }
120 if ((res = pcit_set_config_address(bus->number, devfn, reg)))
121 return res;
122
123 switch (size) {
124 case 1:
125 *val = inb(PCIMT_CONFIG_DATA + (reg & 3));
126 break;
127 case 2:
128 *val = inw(PCIMT_CONFIG_DATA + (reg & 2));
129 break;
130 case 4:
131 *val = inl(PCIMT_CONFIG_DATA);
132 break;
133 }
134 return 0;
135 }
136
pcit_write(struct pci_bus * bus,unsigned int devfn,int reg,int size,u32 val)137 static int pcit_write(struct pci_bus *bus, unsigned int devfn, int reg,
138 int size, u32 val)
139 {
140 int res;
141
142 if ((res = pcit_set_config_address(bus->number, devfn, reg)))
143 return res;
144
145 switch (size) {
146 case 1:
147 outb(val, PCIMT_CONFIG_DATA + (reg & 3));
148 break;
149 case 2:
150 outw(val, PCIMT_CONFIG_DATA + (reg & 2));
151 break;
152 case 4:
153 outl(val, PCIMT_CONFIG_DATA);
154 break;
155 }
156
157 return 0;
158 }
159
160
161 struct pci_ops sni_pcit_ops = {
162 .read = pcit_read,
163 .write = pcit_write,
164 };
165