1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * drivers/net/phy/smsc.c
4 *
5 * Driver for SMSC PHYs
6 *
7 * Author: Herbert Valerio Riedel
8 *
9 * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
10 *
11 * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
12 *
13 */
14
15 #include <linux/clk.h>
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/mii.h>
19 #include <linux/ethtool.h>
20 #include <linux/of.h>
21 #include <linux/phy.h>
22 #include <linux/netdevice.h>
23 #include <linux/crc16.h>
24 #include <linux/etherdevice.h>
25 #include <linux/smscphy.h>
26
27 /* Vendor-specific PHY Definitions */
28 /* EDPD NLP / crossover time configuration */
29 #define PHY_EDPD_CONFIG 16
30 #define PHY_EDPD_CONFIG_EXT_CROSSOVER_ 0x0001
31
32 /* Control/Status Indication Register */
33 #define SPECIAL_CTRL_STS 27
34 #define SPECIAL_CTRL_STS_OVRRD_AMDIX_ 0x8000
35 #define SPECIAL_CTRL_STS_AMDIX_ENABLE_ 0x4000
36 #define SPECIAL_CTRL_STS_AMDIX_STATE_ 0x2000
37
38 #define EDPD_MAX_WAIT_DFLT_MS 640
39 /* interval between phylib state machine runs in ms */
40 #define PHY_STATE_MACH_MS 1000
41
42 struct smsc_hw_stat {
43 const char *string;
44 u8 reg;
45 u8 bits;
46 };
47
48 static struct smsc_hw_stat smsc_hw_stats[] = {
49 { "phy_symbol_errors", 26, 16},
50 };
51
52 struct smsc_phy_priv {
53 unsigned int edpd_enable:1;
54 unsigned int edpd_mode_set_by_user:1;
55 unsigned int edpd_max_wait_ms;
56 bool wol_arp;
57 };
58
smsc_phy_ack_interrupt(struct phy_device * phydev)59 static int smsc_phy_ack_interrupt(struct phy_device *phydev)
60 {
61 int rc = phy_read(phydev, MII_LAN83C185_ISF);
62
63 return rc < 0 ? rc : 0;
64 }
65
smsc_phy_config_intr(struct phy_device * phydev)66 int smsc_phy_config_intr(struct phy_device *phydev)
67 {
68 int rc;
69
70 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
71 rc = smsc_phy_ack_interrupt(phydev);
72 if (rc)
73 return rc;
74
75 rc = phy_write(phydev, MII_LAN83C185_IM,
76 MII_LAN83C185_ISF_INT_PHYLIB_EVENTS);
77 } else {
78 rc = phy_write(phydev, MII_LAN83C185_IM, 0);
79 if (rc)
80 return rc;
81
82 rc = smsc_phy_ack_interrupt(phydev);
83 }
84
85 return rc < 0 ? rc : 0;
86 }
87 EXPORT_SYMBOL_GPL(smsc_phy_config_intr);
88
smsc_phy_config_edpd(struct phy_device * phydev)89 static int smsc_phy_config_edpd(struct phy_device *phydev)
90 {
91 struct smsc_phy_priv *priv = phydev->priv;
92
93 if (priv->edpd_enable)
94 return phy_set_bits(phydev, MII_LAN83C185_CTRL_STATUS,
95 MII_LAN83C185_EDPWRDOWN);
96 else
97 return phy_clear_bits(phydev, MII_LAN83C185_CTRL_STATUS,
98 MII_LAN83C185_EDPWRDOWN);
99 }
100
smsc_phy_handle_interrupt(struct phy_device * phydev)101 irqreturn_t smsc_phy_handle_interrupt(struct phy_device *phydev)
102 {
103 int irq_status;
104
105 irq_status = phy_read(phydev, MII_LAN83C185_ISF);
106 if (irq_status < 0) {
107 if (irq_status != -ENODEV)
108 phy_error(phydev);
109
110 return IRQ_NONE;
111 }
112
113 if (!(irq_status & MII_LAN83C185_ISF_INT_PHYLIB_EVENTS))
114 return IRQ_NONE;
115
116 phy_trigger_machine(phydev);
117
118 return IRQ_HANDLED;
119 }
120 EXPORT_SYMBOL_GPL(smsc_phy_handle_interrupt);
121
smsc_phy_config_init(struct phy_device * phydev)122 int smsc_phy_config_init(struct phy_device *phydev)
123 {
124 struct smsc_phy_priv *priv = phydev->priv;
125
126 if (!priv)
127 return 0;
128
129 /* don't use EDPD in irq mode except overridden by user */
130 if (!priv->edpd_mode_set_by_user && phydev->irq != PHY_POLL)
131 priv->edpd_enable = false;
132
133 return smsc_phy_config_edpd(phydev);
134 }
135 EXPORT_SYMBOL_GPL(smsc_phy_config_init);
136
smsc_phy_reset(struct phy_device * phydev)137 static int smsc_phy_reset(struct phy_device *phydev)
138 {
139 int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
140 if (rc < 0)
141 return rc;
142
143 /* If the SMSC PHY is in power down mode, then set it
144 * in all capable mode before using it.
145 */
146 if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
147 /* set "all capable" mode */
148 rc |= MII_LAN83C185_MODE_ALL;
149 phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
150 }
151
152 /* reset the phy */
153 return genphy_soft_reset(phydev);
154 }
155
lan87xx_config_aneg(struct phy_device * phydev)156 static int lan87xx_config_aneg(struct phy_device *phydev)
157 {
158 int rc;
159 int val;
160
161 switch (phydev->mdix_ctrl) {
162 case ETH_TP_MDI:
163 val = SPECIAL_CTRL_STS_OVRRD_AMDIX_;
164 break;
165 case ETH_TP_MDI_X:
166 val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
167 SPECIAL_CTRL_STS_AMDIX_STATE_;
168 break;
169 case ETH_TP_MDI_AUTO:
170 val = SPECIAL_CTRL_STS_AMDIX_ENABLE_;
171 break;
172 default:
173 return genphy_config_aneg(phydev);
174 }
175
176 rc = phy_read(phydev, SPECIAL_CTRL_STS);
177 if (rc < 0)
178 return rc;
179
180 rc &= ~(SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
181 SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
182 SPECIAL_CTRL_STS_AMDIX_STATE_);
183 rc |= val;
184 phy_write(phydev, SPECIAL_CTRL_STS, rc);
185
186 phydev->mdix = phydev->mdix_ctrl;
187 return genphy_config_aneg(phydev);
188 }
189
lan95xx_config_aneg_ext(struct phy_device * phydev)190 static int lan95xx_config_aneg_ext(struct phy_device *phydev)
191 {
192 if (phydev->phy_id == 0x0007c0f0) { /* LAN9500A or LAN9505A */
193 /* Extend Manual AutoMDIX timer */
194 int rc = phy_set_bits(phydev, PHY_EDPD_CONFIG,
195 PHY_EDPD_CONFIG_EXT_CROSSOVER_);
196
197 if (rc < 0)
198 return rc;
199 }
200
201 return lan87xx_config_aneg(phydev);
202 }
203
204 /*
205 * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
206 * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
207 * unstable detection of plugging in Ethernet cable.
208 * This workaround disables Energy Detect Power-Down mode and waiting for
209 * response on link pulses to detect presence of plugged Ethernet cable.
210 * The Energy Detect Power-Down mode is enabled again in the end of procedure to
211 * save approximately 220 mW of power if cable is unplugged.
212 * The workaround is only applicable to poll mode. Energy Detect Power-Down may
213 * not be used in interrupt mode lest link change detection becomes unreliable.
214 */
lan87xx_read_status(struct phy_device * phydev)215 int lan87xx_read_status(struct phy_device *phydev)
216 {
217 struct smsc_phy_priv *priv = phydev->priv;
218 int err;
219
220 err = genphy_read_status(phydev);
221 if (err)
222 return err;
223
224 if (!phydev->link && priv && priv->edpd_enable &&
225 priv->edpd_max_wait_ms) {
226 unsigned int max_wait = priv->edpd_max_wait_ms * 1000;
227 int rc;
228
229 /* Disable EDPD to wake up PHY */
230 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
231 if (rc < 0)
232 return rc;
233
234 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
235 rc & ~MII_LAN83C185_EDPWRDOWN);
236 if (rc < 0)
237 return rc;
238
239 /* Wait max 640 ms to detect energy and the timeout is not
240 * an actual error.
241 */
242 read_poll_timeout(phy_read, rc,
243 rc & MII_LAN83C185_ENERGYON || rc < 0,
244 10000, max_wait, true, phydev,
245 MII_LAN83C185_CTRL_STATUS);
246 if (rc < 0)
247 return rc;
248
249 /* Re-enable EDPD */
250 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
251 if (rc < 0)
252 return rc;
253
254 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
255 rc | MII_LAN83C185_EDPWRDOWN);
256 if (rc < 0)
257 return rc;
258 }
259
260 return err;
261 }
262 EXPORT_SYMBOL_GPL(lan87xx_read_status);
263
lan874x_phy_config_init(struct phy_device * phydev)264 static int lan874x_phy_config_init(struct phy_device *phydev)
265 {
266 u16 val;
267 int rc;
268
269 /* Setup LED2/nINT/nPME pin to function as nPME. May need user option
270 * to use LED1/nINT/nPME.
271 */
272 val = MII_LAN874X_PHY_PME2_SET;
273
274 /* The bits MII_LAN874X_PHY_WOL_PFDA_FR, MII_LAN874X_PHY_WOL_WUFR,
275 * MII_LAN874X_PHY_WOL_MPR, and MII_LAN874X_PHY_WOL_BCAST_FR need to
276 * be cleared to de-assert PME signal after a WoL event happens, but
277 * using PME auto clear gets around that.
278 */
279 val |= MII_LAN874X_PHY_PME_SELF_CLEAR;
280 rc = phy_write_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR,
281 val);
282 if (rc < 0)
283 return rc;
284
285 /* set nPME self clear delay time */
286 rc = phy_write_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_MCFGR,
287 MII_LAN874X_PHY_PME_SELF_CLEAR_DELAY);
288 if (rc < 0)
289 return rc;
290
291 return smsc_phy_config_init(phydev);
292 }
293
lan874x_get_wol(struct phy_device * phydev,struct ethtool_wolinfo * wol)294 static void lan874x_get_wol(struct phy_device *phydev,
295 struct ethtool_wolinfo *wol)
296 {
297 struct smsc_phy_priv *priv = phydev->priv;
298 int rc;
299
300 wol->supported = (WAKE_UCAST | WAKE_BCAST | WAKE_MAGIC |
301 WAKE_ARP | WAKE_MCAST);
302 wol->wolopts = 0;
303
304 rc = phy_read_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR);
305 if (rc < 0)
306 return;
307
308 if (rc & MII_LAN874X_PHY_WOL_PFDAEN)
309 wol->wolopts |= WAKE_UCAST;
310
311 if (rc & MII_LAN874X_PHY_WOL_BCSTEN)
312 wol->wolopts |= WAKE_BCAST;
313
314 if (rc & MII_LAN874X_PHY_WOL_MPEN)
315 wol->wolopts |= WAKE_MAGIC;
316
317 if (rc & MII_LAN874X_PHY_WOL_WUEN) {
318 if (priv->wol_arp)
319 wol->wolopts |= WAKE_ARP;
320 else
321 wol->wolopts |= WAKE_MCAST;
322 }
323 }
324
smsc_crc16(const u8 * buffer,size_t len)325 static u16 smsc_crc16(const u8 *buffer, size_t len)
326 {
327 return bitrev16(crc16(0xFFFF, buffer, len));
328 }
329
lan874x_chk_wol_pattern(const u8 pattern[],const u16 * mask,u8 len,u8 * data,u8 * datalen)330 static int lan874x_chk_wol_pattern(const u8 pattern[], const u16 *mask,
331 u8 len, u8 *data, u8 *datalen)
332 {
333 size_t i, j, k;
334 int ret = 0;
335 u16 bits;
336
337 /* Pattern filtering can match up to 128 bytes of frame data. There
338 * are 8 registers to program the 16-bit masks, where each bit means
339 * the byte will be compared. The frame data will then go through a
340 * CRC16 calculation for hardware comparison. This helper function
341 * makes sure only relevant frame data are included in this
342 * calculation. It provides a warning when the masks and expected
343 * data size do not match.
344 */
345 i = 0;
346 k = 0;
347 while (len > 0) {
348 bits = *mask;
349 for (j = 0; j < 16; j++, i++, len--) {
350 /* No more pattern. */
351 if (!len) {
352 /* The rest of bitmap is not empty. */
353 if (bits)
354 ret = i + 1;
355 break;
356 }
357 if (bits & 1)
358 data[k++] = pattern[i];
359 bits >>= 1;
360 }
361 mask++;
362 }
363 *datalen = k;
364 return ret;
365 }
366
lan874x_set_wol_pattern(struct phy_device * phydev,u16 val,const u8 data[],u8 datalen,const u16 * mask,u8 masklen)367 static int lan874x_set_wol_pattern(struct phy_device *phydev, u16 val,
368 const u8 data[], u8 datalen,
369 const u16 *mask, u8 masklen)
370 {
371 u16 crc, reg;
372 int rc;
373
374 /* Starting pattern offset is set before calling this function. */
375 val |= MII_LAN874X_PHY_WOL_FILTER_EN;
376 rc = phy_write_mmd(phydev, MDIO_MMD_PCS,
377 MII_LAN874X_PHY_MMD_WOL_WUF_CFGA, val);
378 if (rc < 0)
379 return rc;
380
381 crc = smsc_crc16(data, datalen);
382 rc = phy_write_mmd(phydev, MDIO_MMD_PCS,
383 MII_LAN874X_PHY_MMD_WOL_WUF_CFGB, crc);
384 if (rc < 0)
385 return rc;
386
387 masklen = (masklen + 15) & ~0xf;
388 reg = MII_LAN874X_PHY_MMD_WOL_WUF_MASK7;
389 while (masklen >= 16) {
390 rc = phy_write_mmd(phydev, MDIO_MMD_PCS, reg, *mask);
391 if (rc < 0)
392 return rc;
393 reg--;
394 mask++;
395 masklen -= 16;
396 }
397
398 /* Clear out the rest of mask registers. */
399 while (reg != MII_LAN874X_PHY_MMD_WOL_WUF_MASK0) {
400 phy_write_mmd(phydev, MDIO_MMD_PCS, reg, 0);
401 reg--;
402 }
403 return rc;
404 }
405
lan874x_set_wol(struct phy_device * phydev,struct ethtool_wolinfo * wol)406 static int lan874x_set_wol(struct phy_device *phydev,
407 struct ethtool_wolinfo *wol)
408 {
409 struct net_device *ndev = phydev->attached_dev;
410 struct smsc_phy_priv *priv = phydev->priv;
411 u16 val, val_wucsr;
412 u8 data[128];
413 u8 datalen;
414 int rc;
415
416 /* lan874x has only one WoL filter pattern */
417 if ((wol->wolopts & (WAKE_ARP | WAKE_MCAST)) ==
418 (WAKE_ARP | WAKE_MCAST)) {
419 phydev_info(phydev,
420 "lan874x WoL supports one of ARP|MCAST at a time\n");
421 return -EOPNOTSUPP;
422 }
423
424 rc = phy_read_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR);
425 if (rc < 0)
426 return rc;
427
428 val_wucsr = rc;
429
430 if (wol->wolopts & WAKE_UCAST)
431 val_wucsr |= MII_LAN874X_PHY_WOL_PFDAEN;
432 else
433 val_wucsr &= ~MII_LAN874X_PHY_WOL_PFDAEN;
434
435 if (wol->wolopts & WAKE_BCAST)
436 val_wucsr |= MII_LAN874X_PHY_WOL_BCSTEN;
437 else
438 val_wucsr &= ~MII_LAN874X_PHY_WOL_BCSTEN;
439
440 if (wol->wolopts & WAKE_MAGIC)
441 val_wucsr |= MII_LAN874X_PHY_WOL_MPEN;
442 else
443 val_wucsr &= ~MII_LAN874X_PHY_WOL_MPEN;
444
445 /* Need to use pattern matching */
446 if (wol->wolopts & (WAKE_ARP | WAKE_MCAST))
447 val_wucsr |= MII_LAN874X_PHY_WOL_WUEN;
448 else
449 val_wucsr &= ~MII_LAN874X_PHY_WOL_WUEN;
450
451 if (wol->wolopts & WAKE_ARP) {
452 const u8 pattern[2] = { 0x08, 0x06 };
453 const u16 mask[1] = { 0x0003 };
454
455 rc = lan874x_chk_wol_pattern(pattern, mask, 2, data,
456 &datalen);
457 if (rc)
458 phydev_dbg(phydev, "pattern not valid at %d\n", rc);
459
460 /* Need to match broadcast destination address and provided
461 * data pattern at offset 12.
462 */
463 val = 12 | MII_LAN874X_PHY_WOL_FILTER_BCSTEN;
464 rc = lan874x_set_wol_pattern(phydev, val, data, datalen, mask,
465 2);
466 if (rc < 0)
467 return rc;
468 priv->wol_arp = true;
469 }
470
471 if (wol->wolopts & WAKE_MCAST) {
472 /* Need to match multicast destination address. */
473 val = MII_LAN874X_PHY_WOL_FILTER_MCASTTEN;
474 rc = lan874x_set_wol_pattern(phydev, val, data, 0, NULL, 0);
475 if (rc < 0)
476 return rc;
477 priv->wol_arp = false;
478 }
479
480 if (wol->wolopts & (WAKE_MAGIC | WAKE_UCAST)) {
481 const u8 *mac = (const u8 *)ndev->dev_addr;
482 int i, reg;
483
484 reg = MII_LAN874X_PHY_MMD_WOL_RX_ADDRC;
485 for (i = 0; i < 6; i += 2, reg--) {
486 rc = phy_write_mmd(phydev, MDIO_MMD_PCS, reg,
487 ((mac[i + 1] << 8) | mac[i]));
488 if (rc < 0)
489 return rc;
490 }
491 }
492
493 rc = phy_write_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR,
494 val_wucsr);
495 if (rc < 0)
496 return rc;
497
498 return 0;
499 }
500
smsc_get_sset_count(struct phy_device * phydev)501 static int smsc_get_sset_count(struct phy_device *phydev)
502 {
503 return ARRAY_SIZE(smsc_hw_stats);
504 }
505
smsc_get_strings(struct phy_device * phydev,u8 * data)506 static void smsc_get_strings(struct phy_device *phydev, u8 *data)
507 {
508 int i;
509
510 for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) {
511 strncpy(data + i * ETH_GSTRING_LEN,
512 smsc_hw_stats[i].string, ETH_GSTRING_LEN);
513 }
514 }
515
smsc_get_stat(struct phy_device * phydev,int i)516 static u64 smsc_get_stat(struct phy_device *phydev, int i)
517 {
518 struct smsc_hw_stat stat = smsc_hw_stats[i];
519 int val;
520 u64 ret;
521
522 val = phy_read(phydev, stat.reg);
523 if (val < 0)
524 ret = U64_MAX;
525 else
526 ret = val;
527
528 return ret;
529 }
530
smsc_get_stats(struct phy_device * phydev,struct ethtool_stats * stats,u64 * data)531 static void smsc_get_stats(struct phy_device *phydev,
532 struct ethtool_stats *stats, u64 *data)
533 {
534 int i;
535
536 for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++)
537 data[i] = smsc_get_stat(phydev, i);
538 }
539
smsc_phy_get_edpd(struct phy_device * phydev,u16 * edpd)540 static int smsc_phy_get_edpd(struct phy_device *phydev, u16 *edpd)
541 {
542 struct smsc_phy_priv *priv = phydev->priv;
543
544 if (!priv)
545 return -EOPNOTSUPP;
546
547 if (!priv->edpd_enable)
548 *edpd = ETHTOOL_PHY_EDPD_DISABLE;
549 else if (!priv->edpd_max_wait_ms)
550 *edpd = ETHTOOL_PHY_EDPD_NO_TX;
551 else
552 *edpd = PHY_STATE_MACH_MS + priv->edpd_max_wait_ms;
553
554 return 0;
555 }
556
smsc_phy_set_edpd(struct phy_device * phydev,u16 edpd)557 static int smsc_phy_set_edpd(struct phy_device *phydev, u16 edpd)
558 {
559 struct smsc_phy_priv *priv = phydev->priv;
560
561 if (!priv)
562 return -EOPNOTSUPP;
563
564 switch (edpd) {
565 case ETHTOOL_PHY_EDPD_DISABLE:
566 priv->edpd_enable = false;
567 break;
568 case ETHTOOL_PHY_EDPD_NO_TX:
569 priv->edpd_enable = true;
570 priv->edpd_max_wait_ms = 0;
571 break;
572 case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
573 edpd = PHY_STATE_MACH_MS + EDPD_MAX_WAIT_DFLT_MS;
574 fallthrough;
575 default:
576 if (phydev->irq != PHY_POLL)
577 return -EOPNOTSUPP;
578 if (edpd < PHY_STATE_MACH_MS || edpd > PHY_STATE_MACH_MS + 1000)
579 return -EINVAL;
580 priv->edpd_enable = true;
581 priv->edpd_max_wait_ms = edpd - PHY_STATE_MACH_MS;
582 }
583
584 priv->edpd_mode_set_by_user = true;
585
586 return smsc_phy_config_edpd(phydev);
587 }
588
smsc_phy_get_tunable(struct phy_device * phydev,struct ethtool_tunable * tuna,void * data)589 int smsc_phy_get_tunable(struct phy_device *phydev,
590 struct ethtool_tunable *tuna, void *data)
591 {
592 switch (tuna->id) {
593 case ETHTOOL_PHY_EDPD:
594 return smsc_phy_get_edpd(phydev, data);
595 default:
596 return -EOPNOTSUPP;
597 }
598 }
599 EXPORT_SYMBOL_GPL(smsc_phy_get_tunable);
600
smsc_phy_set_tunable(struct phy_device * phydev,struct ethtool_tunable * tuna,const void * data)601 int smsc_phy_set_tunable(struct phy_device *phydev,
602 struct ethtool_tunable *tuna, const void *data)
603 {
604 switch (tuna->id) {
605 case ETHTOOL_PHY_EDPD:
606 return smsc_phy_set_edpd(phydev, *(u16 *)data);
607 default:
608 return -EOPNOTSUPP;
609 }
610 }
611 EXPORT_SYMBOL_GPL(smsc_phy_set_tunable);
612
smsc_phy_probe(struct phy_device * phydev)613 int smsc_phy_probe(struct phy_device *phydev)
614 {
615 struct device *dev = &phydev->mdio.dev;
616 struct smsc_phy_priv *priv;
617 struct clk *refclk;
618
619 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
620 if (!priv)
621 return -ENOMEM;
622
623 priv->edpd_enable = true;
624 priv->edpd_max_wait_ms = EDPD_MAX_WAIT_DFLT_MS;
625
626 if (device_property_present(dev, "smsc,disable-energy-detect"))
627 priv->edpd_enable = false;
628
629 phydev->priv = priv;
630
631 /* Make clk optional to keep DTB backward compatibility. */
632 refclk = devm_clk_get_optional_enabled(dev, NULL);
633 if (IS_ERR(refclk))
634 return dev_err_probe(dev, PTR_ERR(refclk),
635 "Failed to request clock\n");
636
637 return clk_set_rate(refclk, 50 * 1000 * 1000);
638 }
639 EXPORT_SYMBOL_GPL(smsc_phy_probe);
640
641 static struct phy_driver smsc_phy_driver[] = {
642 {
643 .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
644 .phy_id_mask = 0xfffffff0,
645 .name = "SMSC LAN83C185",
646
647 /* PHY_BASIC_FEATURES */
648
649 .probe = smsc_phy_probe,
650
651 /* basic functions */
652 .config_init = smsc_phy_config_init,
653 .soft_reset = smsc_phy_reset,
654
655 /* IRQ related */
656 .config_intr = smsc_phy_config_intr,
657 .handle_interrupt = smsc_phy_handle_interrupt,
658
659 .suspend = genphy_suspend,
660 .resume = genphy_resume,
661 }, {
662 .phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
663 .phy_id_mask = 0xfffffff0,
664 .name = "SMSC LAN8187",
665
666 /* PHY_BASIC_FEATURES */
667
668 .probe = smsc_phy_probe,
669
670 /* basic functions */
671 .config_init = smsc_phy_config_init,
672 .soft_reset = smsc_phy_reset,
673
674 /* IRQ related */
675 .config_intr = smsc_phy_config_intr,
676 .handle_interrupt = smsc_phy_handle_interrupt,
677
678 /* Statistics */
679 .get_sset_count = smsc_get_sset_count,
680 .get_strings = smsc_get_strings,
681 .get_stats = smsc_get_stats,
682
683 .suspend = genphy_suspend,
684 .resume = genphy_resume,
685 }, {
686 /* This covers internal PHY (phy_id: 0x0007C0C3) for
687 * LAN9500 (PID: 0x9500), LAN9514 (PID: 0xec00), LAN9505 (PID: 0x9505)
688 */
689 .phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
690 .phy_id_mask = 0xfffffff0,
691 .name = "SMSC LAN8700",
692
693 /* PHY_BASIC_FEATURES */
694
695 .probe = smsc_phy_probe,
696
697 /* basic functions */
698 .read_status = lan87xx_read_status,
699 .config_init = smsc_phy_config_init,
700 .soft_reset = smsc_phy_reset,
701 .config_aneg = lan87xx_config_aneg,
702
703 /* IRQ related */
704 .config_intr = smsc_phy_config_intr,
705 .handle_interrupt = smsc_phy_handle_interrupt,
706
707 /* Statistics */
708 .get_sset_count = smsc_get_sset_count,
709 .get_strings = smsc_get_strings,
710 .get_stats = smsc_get_stats,
711
712 .get_tunable = smsc_phy_get_tunable,
713 .set_tunable = smsc_phy_set_tunable,
714
715 .suspend = genphy_suspend,
716 .resume = genphy_resume,
717 }, {
718 .phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
719 .phy_id_mask = 0xfffffff0,
720 .name = "SMSC LAN911x Internal PHY",
721
722 /* PHY_BASIC_FEATURES */
723
724 .probe = smsc_phy_probe,
725
726 /* IRQ related */
727 .config_intr = smsc_phy_config_intr,
728 .handle_interrupt = smsc_phy_handle_interrupt,
729
730 .suspend = genphy_suspend,
731 .resume = genphy_resume,
732 }, {
733 /* This covers internal PHY (phy_id: 0x0007C0F0) for
734 * LAN9500A (PID: 0x9E00), LAN9505A (PID: 0x9E01)
735 */
736 .phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
737 .phy_id_mask = 0xfffffff0,
738 .name = "SMSC LAN8710/LAN8720",
739
740 /* PHY_BASIC_FEATURES */
741
742 .probe = smsc_phy_probe,
743
744 /* basic functions */
745 .read_status = lan87xx_read_status,
746 .config_init = smsc_phy_config_init,
747 .soft_reset = smsc_phy_reset,
748 .config_aneg = lan95xx_config_aneg_ext,
749
750 /* IRQ related */
751 .config_intr = smsc_phy_config_intr,
752 .handle_interrupt = smsc_phy_handle_interrupt,
753
754 /* Statistics */
755 .get_sset_count = smsc_get_sset_count,
756 .get_strings = smsc_get_strings,
757 .get_stats = smsc_get_stats,
758
759 .get_tunable = smsc_phy_get_tunable,
760 .set_tunable = smsc_phy_set_tunable,
761
762 .suspend = genphy_suspend,
763 .resume = genphy_resume,
764 }, {
765 .phy_id = 0x0007c110,
766 .phy_id_mask = 0xfffffff0,
767 .name = "SMSC LAN8740",
768
769 /* PHY_BASIC_FEATURES */
770 .flags = PHY_RST_AFTER_CLK_EN,
771
772 .probe = smsc_phy_probe,
773
774 /* basic functions */
775 .read_status = lan87xx_read_status,
776 .config_init = lan874x_phy_config_init,
777 .soft_reset = smsc_phy_reset,
778
779 /* IRQ related */
780 .config_intr = smsc_phy_config_intr,
781 .handle_interrupt = smsc_phy_handle_interrupt,
782
783 /* Statistics */
784 .get_sset_count = smsc_get_sset_count,
785 .get_strings = smsc_get_strings,
786 .get_stats = smsc_get_stats,
787
788 .get_tunable = smsc_phy_get_tunable,
789 .set_tunable = smsc_phy_set_tunable,
790
791 /* WoL */
792 .set_wol = lan874x_set_wol,
793 .get_wol = lan874x_get_wol,
794
795 .suspend = genphy_suspend,
796 .resume = genphy_resume,
797 }, {
798 .phy_id = 0x0007c130, /* 0x0007c130 and 0x0007c131 */
799 /* This mask (0xfffffff2) is to differentiate from
800 * LAN88xx (phy_id 0x0007c132)
801 * and allows future phy_id revisions.
802 */
803 .phy_id_mask = 0xfffffff2,
804 .name = "Microchip LAN8742",
805
806 /* PHY_BASIC_FEATURES */
807 .flags = PHY_RST_AFTER_CLK_EN,
808
809 .probe = smsc_phy_probe,
810
811 /* basic functions */
812 .read_status = lan87xx_read_status,
813 .config_init = lan874x_phy_config_init,
814 .soft_reset = smsc_phy_reset,
815
816 /* IRQ related */
817 .config_intr = smsc_phy_config_intr,
818 .handle_interrupt = smsc_phy_handle_interrupt,
819
820 /* Statistics */
821 .get_sset_count = smsc_get_sset_count,
822 .get_strings = smsc_get_strings,
823 .get_stats = smsc_get_stats,
824
825 .get_tunable = smsc_phy_get_tunable,
826 .set_tunable = smsc_phy_set_tunable,
827
828 /* WoL */
829 .set_wol = lan874x_set_wol,
830 .get_wol = lan874x_get_wol,
831
832 .suspend = genphy_suspend,
833 .resume = genphy_resume,
834 } };
835
836 module_phy_driver(smsc_phy_driver);
837
838 MODULE_DESCRIPTION("SMSC PHY driver");
839 MODULE_AUTHOR("Herbert Valerio Riedel");
840 MODULE_LICENSE("GPL");
841
842 static struct mdio_device_id __maybe_unused smsc_tbl[] = {
843 { 0x0007c0a0, 0xfffffff0 },
844 { 0x0007c0b0, 0xfffffff0 },
845 { 0x0007c0c0, 0xfffffff0 },
846 { 0x0007c0d0, 0xfffffff0 },
847 { 0x0007c0f0, 0xfffffff0 },
848 { 0x0007c110, 0xfffffff0 },
849 { 0x0007c130, 0xfffffff2 },
850 { }
851 };
852
853 MODULE_DEVICE_TABLE(mdio, smsc_tbl);
854