1 // SPDX-License-Identifier: GPL-2.0-or-later
2 
3 #include <linux/regset.h>
4 #include <linux/hw_breakpoint.h>
5 
6 #include "ptrace-decl.h"
7 
user_enable_single_step(struct task_struct * task)8 void user_enable_single_step(struct task_struct *task)
9 {
10 	struct pt_regs *regs = task->thread.regs;
11 
12 	if (regs != NULL) {
13 		task->thread.debug.dbcr0 &= ~DBCR0_BT;
14 		task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
15 		regs_set_return_msr(regs, regs->msr | MSR_DE);
16 	}
17 	set_tsk_thread_flag(task, TIF_SINGLESTEP);
18 }
19 
user_enable_block_step(struct task_struct * task)20 void user_enable_block_step(struct task_struct *task)
21 {
22 	struct pt_regs *regs = task->thread.regs;
23 
24 	if (regs != NULL) {
25 		task->thread.debug.dbcr0 &= ~DBCR0_IC;
26 		task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT;
27 		regs_set_return_msr(regs, regs->msr | MSR_DE);
28 	}
29 	set_tsk_thread_flag(task, TIF_SINGLESTEP);
30 }
31 
user_disable_single_step(struct task_struct * task)32 void user_disable_single_step(struct task_struct *task)
33 {
34 	struct pt_regs *regs = task->thread.regs;
35 
36 	if (regs != NULL) {
37 		/*
38 		 * The logic to disable single stepping should be as
39 		 * simple as turning off the Instruction Complete flag.
40 		 * And, after doing so, if all debug flags are off, turn
41 		 * off DBCR0(IDM) and MSR(DE) .... Torez
42 		 */
43 		task->thread.debug.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
44 		/*
45 		 * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
46 		 */
47 		if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
48 					task->thread.debug.dbcr1)) {
49 			/*
50 			 * All debug events were off.....
51 			 */
52 			task->thread.debug.dbcr0 &= ~DBCR0_IDM;
53 			regs_set_return_msr(regs, regs->msr & ~MSR_DE);
54 		}
55 	}
56 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
57 }
58 
ppc_gethwdinfo(struct ppc_debug_info * dbginfo)59 void ppc_gethwdinfo(struct ppc_debug_info *dbginfo)
60 {
61 	dbginfo->version = 1;
62 	dbginfo->num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS;
63 	dbginfo->num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS;
64 	dbginfo->num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS;
65 	dbginfo->data_bp_alignment = 4;
66 	dbginfo->sizeof_condition = 4;
67 	dbginfo->features = PPC_DEBUG_FEATURE_INSN_BP_RANGE |
68 			    PPC_DEBUG_FEATURE_INSN_BP_MASK;
69 	if (IS_ENABLED(CONFIG_PPC_ADV_DEBUG_DAC_RANGE))
70 		dbginfo->features |= PPC_DEBUG_FEATURE_DATA_BP_RANGE |
71 				     PPC_DEBUG_FEATURE_DATA_BP_MASK;
72 }
73 
ptrace_get_debugreg(struct task_struct * child,unsigned long addr,unsigned long __user * datalp)74 int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
75 			unsigned long __user *datalp)
76 {
77 	/* We only support one DABR and no IABRS at the moment */
78 	if (addr > 0)
79 		return -EINVAL;
80 	return put_user(child->thread.debug.dac1, datalp);
81 }
82 
ptrace_set_debugreg(struct task_struct * task,unsigned long addr,unsigned long data)83 int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
84 {
85 	struct pt_regs *regs = task->thread.regs;
86 #ifdef CONFIG_HAVE_HW_BREAKPOINT
87 	int ret;
88 	struct thread_struct *thread = &task->thread;
89 	struct perf_event *bp;
90 	struct perf_event_attr attr;
91 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
92 
93 	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
94 	 *  For embedded processors we support one DAC and no IAC's at the
95 	 *  moment.
96 	 */
97 	if (addr > 0)
98 		return -EINVAL;
99 
100 	/* The bottom 3 bits in dabr are flags */
101 	if ((data & ~0x7UL) >= TASK_SIZE)
102 		return -EIO;
103 
104 	/* As described above, it was assumed 3 bits were passed with the data
105 	 *  address, but we will assume only the mode bits will be passed
106 	 *  as to not cause alignment restrictions for DAC-based processors.
107 	 */
108 
109 	/* DAC's hold the whole address without any mode flags */
110 	task->thread.debug.dac1 = data & ~0x3UL;
111 
112 	if (task->thread.debug.dac1 == 0) {
113 		dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
114 		if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
115 					task->thread.debug.dbcr1)) {
116 			regs_set_return_msr(regs, regs->msr & ~MSR_DE);
117 			task->thread.debug.dbcr0 &= ~DBCR0_IDM;
118 		}
119 		return 0;
120 	}
121 
122 	/* Read or Write bits must be set */
123 
124 	if (!(data & 0x3UL))
125 		return -EINVAL;
126 
127 	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 register */
128 	task->thread.debug.dbcr0 |= DBCR0_IDM;
129 
130 	/* Check for write and read flags and set DBCR0 accordingly */
131 	dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
132 	if (data & 0x1UL)
133 		dbcr_dac(task) |= DBCR_DAC1R;
134 	if (data & 0x2UL)
135 		dbcr_dac(task) |= DBCR_DAC1W;
136 	regs_set_return_msr(regs, regs->msr | MSR_DE);
137 	return 0;
138 }
139 
set_instruction_bp(struct task_struct * child,struct ppc_hw_breakpoint * bp_info)140 static long set_instruction_bp(struct task_struct *child,
141 			       struct ppc_hw_breakpoint *bp_info)
142 {
143 	int slot;
144 	int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0);
145 	int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0);
146 	int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0);
147 	int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0);
148 
149 	if (dbcr_iac_range(child) & DBCR_IAC12MODE)
150 		slot2_in_use = 1;
151 	if (dbcr_iac_range(child) & DBCR_IAC34MODE)
152 		slot4_in_use = 1;
153 
154 	if (bp_info->addr >= TASK_SIZE)
155 		return -EIO;
156 
157 	if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
158 		/* Make sure range is valid. */
159 		if (bp_info->addr2 >= TASK_SIZE)
160 			return -EIO;
161 
162 		/* We need a pair of IAC regsisters */
163 		if (!slot1_in_use && !slot2_in_use) {
164 			slot = 1;
165 			child->thread.debug.iac1 = bp_info->addr;
166 			child->thread.debug.iac2 = bp_info->addr2;
167 			child->thread.debug.dbcr0 |= DBCR0_IAC1;
168 			if (bp_info->addr_mode ==
169 					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
170 				dbcr_iac_range(child) |= DBCR_IAC12X;
171 			else
172 				dbcr_iac_range(child) |= DBCR_IAC12I;
173 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
174 		} else if ((!slot3_in_use) && (!slot4_in_use)) {
175 			slot = 3;
176 			child->thread.debug.iac3 = bp_info->addr;
177 			child->thread.debug.iac4 = bp_info->addr2;
178 			child->thread.debug.dbcr0 |= DBCR0_IAC3;
179 			if (bp_info->addr_mode ==
180 					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
181 				dbcr_iac_range(child) |= DBCR_IAC34X;
182 			else
183 				dbcr_iac_range(child) |= DBCR_IAC34I;
184 #endif
185 		} else {
186 			return -ENOSPC;
187 		}
188 	} else {
189 		/* We only need one.  If possible leave a pair free in
190 		 * case a range is needed later
191 		 */
192 		if (!slot1_in_use) {
193 			/*
194 			 * Don't use iac1 if iac1-iac2 are free and either
195 			 * iac3 or iac4 (but not both) are free
196 			 */
197 			if (slot2_in_use || slot3_in_use == slot4_in_use) {
198 				slot = 1;
199 				child->thread.debug.iac1 = bp_info->addr;
200 				child->thread.debug.dbcr0 |= DBCR0_IAC1;
201 				goto out;
202 			}
203 		}
204 		if (!slot2_in_use) {
205 			slot = 2;
206 			child->thread.debug.iac2 = bp_info->addr;
207 			child->thread.debug.dbcr0 |= DBCR0_IAC2;
208 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
209 		} else if (!slot3_in_use) {
210 			slot = 3;
211 			child->thread.debug.iac3 = bp_info->addr;
212 			child->thread.debug.dbcr0 |= DBCR0_IAC3;
213 		} else if (!slot4_in_use) {
214 			slot = 4;
215 			child->thread.debug.iac4 = bp_info->addr;
216 			child->thread.debug.dbcr0 |= DBCR0_IAC4;
217 #endif
218 		} else {
219 			return -ENOSPC;
220 		}
221 	}
222 out:
223 	child->thread.debug.dbcr0 |= DBCR0_IDM;
224 	regs_set_return_msr(child->thread.regs, child->thread.regs->msr | MSR_DE);
225 
226 	return slot;
227 }
228 
del_instruction_bp(struct task_struct * child,int slot)229 static int del_instruction_bp(struct task_struct *child, int slot)
230 {
231 	switch (slot) {
232 	case 1:
233 		if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0)
234 			return -ENOENT;
235 
236 		if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
237 			/* address range - clear slots 1 & 2 */
238 			child->thread.debug.iac2 = 0;
239 			dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
240 		}
241 		child->thread.debug.iac1 = 0;
242 		child->thread.debug.dbcr0 &= ~DBCR0_IAC1;
243 		break;
244 	case 2:
245 		if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0)
246 			return -ENOENT;
247 
248 		if (dbcr_iac_range(child) & DBCR_IAC12MODE)
249 			/* used in a range */
250 			return -EINVAL;
251 		child->thread.debug.iac2 = 0;
252 		child->thread.debug.dbcr0 &= ~DBCR0_IAC2;
253 		break;
254 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
255 	case 3:
256 		if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0)
257 			return -ENOENT;
258 
259 		if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
260 			/* address range - clear slots 3 & 4 */
261 			child->thread.debug.iac4 = 0;
262 			dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
263 		}
264 		child->thread.debug.iac3 = 0;
265 		child->thread.debug.dbcr0 &= ~DBCR0_IAC3;
266 		break;
267 	case 4:
268 		if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0)
269 			return -ENOENT;
270 
271 		if (dbcr_iac_range(child) & DBCR_IAC34MODE)
272 			/* Used in a range */
273 			return -EINVAL;
274 		child->thread.debug.iac4 = 0;
275 		child->thread.debug.dbcr0 &= ~DBCR0_IAC4;
276 		break;
277 #endif
278 	default:
279 		return -EINVAL;
280 	}
281 	return 0;
282 }
283 
set_dac(struct task_struct * child,struct ppc_hw_breakpoint * bp_info)284 static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
285 {
286 	int byte_enable =
287 		(bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
288 		& 0xf;
289 	int condition_mode =
290 		bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
291 	int slot;
292 
293 	if (byte_enable && condition_mode == 0)
294 		return -EINVAL;
295 
296 	if (bp_info->addr >= TASK_SIZE)
297 		return -EIO;
298 
299 	if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
300 		slot = 1;
301 		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
302 			dbcr_dac(child) |= DBCR_DAC1R;
303 		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
304 			dbcr_dac(child) |= DBCR_DAC1W;
305 		child->thread.debug.dac1 = (unsigned long)bp_info->addr;
306 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
307 		if (byte_enable) {
308 			child->thread.debug.dvc1 =
309 				(unsigned long)bp_info->condition_value;
310 			child->thread.debug.dbcr2 |=
311 				((byte_enable << DBCR2_DVC1BE_SHIFT) |
312 				 (condition_mode << DBCR2_DVC1M_SHIFT));
313 		}
314 #endif
315 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
316 	} else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
317 		/* Both dac1 and dac2 are part of a range */
318 		return -ENOSPC;
319 #endif
320 	} else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
321 		slot = 2;
322 		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
323 			dbcr_dac(child) |= DBCR_DAC2R;
324 		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
325 			dbcr_dac(child) |= DBCR_DAC2W;
326 		child->thread.debug.dac2 = (unsigned long)bp_info->addr;
327 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
328 		if (byte_enable) {
329 			child->thread.debug.dvc2 =
330 				(unsigned long)bp_info->condition_value;
331 			child->thread.debug.dbcr2 |=
332 				((byte_enable << DBCR2_DVC2BE_SHIFT) |
333 				 (condition_mode << DBCR2_DVC2M_SHIFT));
334 		}
335 #endif
336 	} else {
337 		return -ENOSPC;
338 	}
339 	child->thread.debug.dbcr0 |= DBCR0_IDM;
340 	regs_set_return_msr(child->thread.regs, child->thread.regs->msr | MSR_DE);
341 
342 	return slot + 4;
343 }
344 
del_dac(struct task_struct * child,int slot)345 static int del_dac(struct task_struct *child, int slot)
346 {
347 	if (slot == 1) {
348 		if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
349 			return -ENOENT;
350 
351 		child->thread.debug.dac1 = 0;
352 		dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
353 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
354 		if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
355 			child->thread.debug.dac2 = 0;
356 			child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
357 		}
358 		child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
359 #endif
360 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
361 		child->thread.debug.dvc1 = 0;
362 #endif
363 	} else if (slot == 2) {
364 		if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
365 			return -ENOENT;
366 
367 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
368 		if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE)
369 			/* Part of a range */
370 			return -EINVAL;
371 		child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
372 #endif
373 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
374 		child->thread.debug.dvc2 = 0;
375 #endif
376 		child->thread.debug.dac2 = 0;
377 		dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
378 	} else {
379 		return -EINVAL;
380 	}
381 
382 	return 0;
383 }
384 
385 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
set_dac_range(struct task_struct * child,struct ppc_hw_breakpoint * bp_info)386 static int set_dac_range(struct task_struct *child,
387 			 struct ppc_hw_breakpoint *bp_info)
388 {
389 	int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
390 
391 	/* We don't allow range watchpoints to be used with DVC */
392 	if (bp_info->condition_mode)
393 		return -EINVAL;
394 
395 	/*
396 	 * Best effort to verify the address range.  The user/supervisor bits
397 	 * prevent trapping in kernel space, but let's fail on an obvious bad
398 	 * range.  The simple test on the mask is not fool-proof, and any
399 	 * exclusive range will spill over into kernel space.
400 	 */
401 	if (bp_info->addr >= TASK_SIZE)
402 		return -EIO;
403 	if (mode == PPC_BREAKPOINT_MODE_MASK) {
404 		/*
405 		 * dac2 is a bitmask.  Don't allow a mask that makes a
406 		 * kernel space address from a valid dac1 value
407 		 */
408 		if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
409 			return -EIO;
410 	} else {
411 		/*
412 		 * For range breakpoints, addr2 must also be a valid address
413 		 */
414 		if (bp_info->addr2 >= TASK_SIZE)
415 			return -EIO;
416 	}
417 
418 	if (child->thread.debug.dbcr0 &
419 	    (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
420 		return -ENOSPC;
421 
422 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
423 		child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
424 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
425 		child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
426 	child->thread.debug.dac1 = bp_info->addr;
427 	child->thread.debug.dac2 = bp_info->addr2;
428 	if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
429 		child->thread.debug.dbcr2  |= DBCR2_DAC12M;
430 	else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
431 		child->thread.debug.dbcr2  |= DBCR2_DAC12MX;
432 	else	/* PPC_BREAKPOINT_MODE_MASK */
433 		child->thread.debug.dbcr2  |= DBCR2_DAC12MM;
434 	regs_set_return_msr(child->thread.regs, child->thread.regs->msr | MSR_DE);
435 
436 	return 5;
437 }
438 #endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
439 
ppc_set_hwdebug(struct task_struct * child,struct ppc_hw_breakpoint * bp_info)440 long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
441 {
442 	if (bp_info->version != 1)
443 		return -ENOTSUPP;
444 	/*
445 	 * Check for invalid flags and combinations
446 	 */
447 	if (bp_info->trigger_type == 0 ||
448 	    (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
449 				       PPC_BREAKPOINT_TRIGGER_RW)) ||
450 	    (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
451 	    (bp_info->condition_mode &
452 	     ~(PPC_BREAKPOINT_CONDITION_MODE |
453 	       PPC_BREAKPOINT_CONDITION_BE_ALL)))
454 		return -EINVAL;
455 #if CONFIG_PPC_ADV_DEBUG_DVCS == 0
456 	if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
457 		return -EINVAL;
458 #endif
459 
460 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
461 		if (bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE ||
462 		    bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
463 			return -EINVAL;
464 		return set_instruction_bp(child, bp_info);
465 	}
466 	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
467 		return set_dac(child, bp_info);
468 
469 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
470 	return set_dac_range(child, bp_info);
471 #else
472 	return -EINVAL;
473 #endif
474 }
475 
ppc_del_hwdebug(struct task_struct * child,long data)476 long ppc_del_hwdebug(struct task_struct *child, long data)
477 {
478 	int rc;
479 
480 	if (data <= 4)
481 		rc = del_instruction_bp(child, (int)data);
482 	else
483 		rc = del_dac(child, (int)data - 4);
484 
485 	if (!rc) {
486 		if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0,
487 					child->thread.debug.dbcr1)) {
488 			child->thread.debug.dbcr0 &= ~DBCR0_IDM;
489 			regs_set_return_msr(child->thread.regs,
490 					child->thread.regs->msr & ~MSR_DE);
491 		}
492 	}
493 	return rc;
494 }
495