1 /* valid adjtimex test
2 * by: John Stultz <john.stultz@linaro.org>
3 * (C) Copyright Linaro 2015
4 * Licensed under the GPLv2
5 *
6 * This test validates adjtimex interface with valid
7 * and invalid test data.
8 *
9 * Usage: valid-adjtimex
10 *
11 * To build:
12 * $ gcc valid-adjtimex.c -o valid-adjtimex -lrt
13 *
14 * This program is free software: you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation, either version 2 of the License, or
17 * (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 */
24 #include <stdio.h>
25 #include <stdlib.h>
26 #include <time.h>
27 #include <sys/time.h>
28 #include <sys/timex.h>
29 #include <string.h>
30 #include <signal.h>
31 #include <unistd.h>
32 #include "../kselftest.h"
33
34 #define NSEC_PER_SEC 1000000000LL
35 #define USEC_PER_SEC 1000000LL
36
37 #define ADJ_SETOFFSET 0x0100
38
39 #include <sys/syscall.h>
clock_adjtime(clockid_t id,struct timex * tx)40 int clock_adjtime(clockid_t id, struct timex *tx)
41 {
42 return syscall(__NR_clock_adjtime, id, tx);
43 }
44
45
46 /* clear NTP time_status & time_state */
clear_time_state(void)47 int clear_time_state(void)
48 {
49 struct timex tx;
50 int ret;
51
52 tx.modes = ADJ_STATUS;
53 tx.status = 0;
54 ret = adjtimex(&tx);
55 return ret;
56 }
57
58 #define NUM_FREQ_VALID 32
59 #define NUM_FREQ_OUTOFRANGE 4
60 #define NUM_FREQ_INVALID 2
61
62 #define SHIFTED_PPM (1 << 16)
63
64 long valid_freq[NUM_FREQ_VALID] = {
65 -499 * SHIFTED_PPM,
66 -450 * SHIFTED_PPM,
67 -400 * SHIFTED_PPM,
68 -350 * SHIFTED_PPM,
69 -300 * SHIFTED_PPM,
70 -250 * SHIFTED_PPM,
71 -200 * SHIFTED_PPM,
72 -150 * SHIFTED_PPM,
73 -100 * SHIFTED_PPM,
74 -75 * SHIFTED_PPM,
75 -50 * SHIFTED_PPM,
76 -25 * SHIFTED_PPM,
77 -10 * SHIFTED_PPM,
78 -5 * SHIFTED_PPM,
79 -1 * SHIFTED_PPM,
80 -1000,
81 1 * SHIFTED_PPM,
82 5 * SHIFTED_PPM,
83 10 * SHIFTED_PPM,
84 25 * SHIFTED_PPM,
85 50 * SHIFTED_PPM,
86 75 * SHIFTED_PPM,
87 100 * SHIFTED_PPM,
88 150 * SHIFTED_PPM,
89 200 * SHIFTED_PPM,
90 250 * SHIFTED_PPM,
91 300 * SHIFTED_PPM,
92 350 * SHIFTED_PPM,
93 400 * SHIFTED_PPM,
94 450 * SHIFTED_PPM,
95 499 * SHIFTED_PPM,
96 };
97
98 long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
99 -1000 * SHIFTED_PPM,
100 -550 * SHIFTED_PPM,
101 550 * SHIFTED_PPM,
102 1000 * SHIFTED_PPM,
103 };
104
105 #define LONG_MAX (~0UL>>1)
106 #define LONG_MIN (-LONG_MAX - 1)
107
108 long invalid_freq[NUM_FREQ_INVALID] = {
109 LONG_MAX,
110 LONG_MIN,
111 };
112
validate_freq(void)113 int validate_freq(void)
114 {
115 struct timex tx;
116 int ret, pass = 0;
117 int i;
118
119 clear_time_state();
120
121 memset(&tx, 0, sizeof(struct timex));
122 /* Set the leap second insert flag */
123
124 printf("Testing ADJ_FREQ... ");
125 fflush(stdout);
126 for (i = 0; i < NUM_FREQ_VALID; i++) {
127 tx.modes = ADJ_FREQUENCY;
128 tx.freq = valid_freq[i];
129
130 ret = adjtimex(&tx);
131 if (ret < 0) {
132 printf("[FAIL]\n");
133 printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
134 valid_freq[i], valid_freq[i]>>16);
135 pass = -1;
136 goto out;
137 }
138 tx.modes = 0;
139 ret = adjtimex(&tx);
140 if (tx.freq != valid_freq[i]) {
141 printf("Warning: freq value %ld not what we set it (%ld)!\n",
142 tx.freq, valid_freq[i]);
143 }
144 }
145 for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) {
146 tx.modes = ADJ_FREQUENCY;
147 tx.freq = outofrange_freq[i];
148
149 ret = adjtimex(&tx);
150 if (ret < 0) {
151 printf("[FAIL]\n");
152 printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
153 outofrange_freq[i], outofrange_freq[i]>>16);
154 pass = -1;
155 goto out;
156 }
157 tx.modes = 0;
158 ret = adjtimex(&tx);
159 if (tx.freq == outofrange_freq[i]) {
160 printf("[FAIL]\n");
161 printf("ERROR: out of range value %ld actually set!\n",
162 tx.freq);
163 pass = -1;
164 goto out;
165 }
166 }
167
168
169 if (sizeof(long) == 8) { /* this case only applies to 64bit systems */
170 for (i = 0; i < NUM_FREQ_INVALID; i++) {
171 tx.modes = ADJ_FREQUENCY;
172 tx.freq = invalid_freq[i];
173 ret = adjtimex(&tx);
174 if (ret >= 0) {
175 printf("[FAIL]\n");
176 printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n",
177 invalid_freq[i]);
178 pass = -1;
179 goto out;
180 }
181 }
182 }
183
184 printf("[OK]\n");
185 out:
186 /* reset freq to zero */
187 tx.modes = ADJ_FREQUENCY;
188 tx.freq = 0;
189 ret = adjtimex(&tx);
190
191 return pass;
192 }
193
194
set_offset(long long offset,int use_nano)195 int set_offset(long long offset, int use_nano)
196 {
197 struct timex tmx = {};
198 int ret;
199
200 tmx.modes = ADJ_SETOFFSET;
201 if (use_nano) {
202 tmx.modes |= ADJ_NANO;
203
204 tmx.time.tv_sec = offset / NSEC_PER_SEC;
205 tmx.time.tv_usec = offset % NSEC_PER_SEC;
206
207 if (offset < 0 && tmx.time.tv_usec) {
208 tmx.time.tv_sec -= 1;
209 tmx.time.tv_usec += NSEC_PER_SEC;
210 }
211 } else {
212 tmx.time.tv_sec = offset / USEC_PER_SEC;
213 tmx.time.tv_usec = offset % USEC_PER_SEC;
214
215 if (offset < 0 && tmx.time.tv_usec) {
216 tmx.time.tv_sec -= 1;
217 tmx.time.tv_usec += USEC_PER_SEC;
218 }
219 }
220
221 ret = clock_adjtime(CLOCK_REALTIME, &tmx);
222 if (ret < 0) {
223 printf("(sec: %ld usec: %ld) ", tmx.time.tv_sec, tmx.time.tv_usec);
224 printf("[FAIL]\n");
225 return -1;
226 }
227 return 0;
228 }
229
set_bad_offset(long sec,long usec,int use_nano)230 int set_bad_offset(long sec, long usec, int use_nano)
231 {
232 struct timex tmx = {};
233 int ret;
234
235 tmx.modes = ADJ_SETOFFSET;
236 if (use_nano)
237 tmx.modes |= ADJ_NANO;
238
239 tmx.time.tv_sec = sec;
240 tmx.time.tv_usec = usec;
241 ret = clock_adjtime(CLOCK_REALTIME, &tmx);
242 if (ret >= 0) {
243 printf("Invalid (sec: %ld usec: %ld) did not fail! ", tmx.time.tv_sec, tmx.time.tv_usec);
244 printf("[FAIL]\n");
245 return -1;
246 }
247 return 0;
248 }
249
validate_set_offset(void)250 int validate_set_offset(void)
251 {
252 printf("Testing ADJ_SETOFFSET... ");
253 fflush(stdout);
254
255 /* Test valid values */
256 if (set_offset(NSEC_PER_SEC - 1, 1))
257 return -1;
258
259 if (set_offset(-NSEC_PER_SEC + 1, 1))
260 return -1;
261
262 if (set_offset(-NSEC_PER_SEC - 1, 1))
263 return -1;
264
265 if (set_offset(5 * NSEC_PER_SEC, 1))
266 return -1;
267
268 if (set_offset(-5 * NSEC_PER_SEC, 1))
269 return -1;
270
271 if (set_offset(5 * NSEC_PER_SEC + NSEC_PER_SEC / 2, 1))
272 return -1;
273
274 if (set_offset(-5 * NSEC_PER_SEC - NSEC_PER_SEC / 2, 1))
275 return -1;
276
277 if (set_offset(USEC_PER_SEC - 1, 0))
278 return -1;
279
280 if (set_offset(-USEC_PER_SEC + 1, 0))
281 return -1;
282
283 if (set_offset(-USEC_PER_SEC - 1, 0))
284 return -1;
285
286 if (set_offset(5 * USEC_PER_SEC, 0))
287 return -1;
288
289 if (set_offset(-5 * USEC_PER_SEC, 0))
290 return -1;
291
292 if (set_offset(5 * USEC_PER_SEC + USEC_PER_SEC / 2, 0))
293 return -1;
294
295 if (set_offset(-5 * USEC_PER_SEC - USEC_PER_SEC / 2, 0))
296 return -1;
297
298 /* Test invalid values */
299 if (set_bad_offset(0, -1, 1))
300 return -1;
301 if (set_bad_offset(0, -1, 0))
302 return -1;
303 if (set_bad_offset(0, 2 * NSEC_PER_SEC, 1))
304 return -1;
305 if (set_bad_offset(0, 2 * USEC_PER_SEC, 0))
306 return -1;
307 if (set_bad_offset(0, NSEC_PER_SEC, 1))
308 return -1;
309 if (set_bad_offset(0, USEC_PER_SEC, 0))
310 return -1;
311 if (set_bad_offset(0, -NSEC_PER_SEC, 1))
312 return -1;
313 if (set_bad_offset(0, -USEC_PER_SEC, 0))
314 return -1;
315
316 printf("[OK]\n");
317 return 0;
318 }
319
main(int argc,char ** argv)320 int main(int argc, char **argv)
321 {
322 if (validate_freq())
323 return ksft_exit_fail();
324
325 if (validate_set_offset())
326 return ksft_exit_fail();
327
328 return ksft_exit_pass();
329 }
330