1 /*
2  * Copyright (c) 2014 Redpine Signals Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18 
19 #include <linux/module.h>
20 #include <linux/firmware.h>
21 #include <net/rsi_91x.h>
22 #include "rsi_mgmt.h"
23 #include "rsi_common.h"
24 #include "rsi_coex.h"
25 #include "rsi_hal.h"
26 #include "rsi_usb.h"
27 
28 u32 rsi_zone_enabled = /* INFO_ZONE |
29 			INIT_ZONE |
30 			MGMT_TX_ZONE |
31 			MGMT_RX_ZONE |
32 			DATA_TX_ZONE |
33 			DATA_RX_ZONE |
34 			FSM_ZONE |
35 			ISR_ZONE | */
36 			ERR_ZONE |
37 			0;
38 EXPORT_SYMBOL_GPL(rsi_zone_enabled);
39 
40 #ifdef CONFIG_RSI_COEX
41 static struct rsi_proto_ops g_proto_ops = {
42 	.coex_send_pkt = rsi_coex_send_pkt,
43 	.get_host_intf = rsi_get_host_intf,
44 	.set_bt_context = rsi_set_bt_context,
45 };
46 #endif
47 
48 /**
49  * rsi_dbg() - This function outputs informational messages.
50  * @zone: Zone of interest for output message.
51  * @fmt: printf-style format for output message.
52  *
53  * Return: none
54  */
rsi_dbg(u32 zone,const char * fmt,...)55 void rsi_dbg(u32 zone, const char *fmt, ...)
56 {
57 	struct va_format vaf;
58 	va_list args;
59 
60 	va_start(args, fmt);
61 
62 	vaf.fmt = fmt;
63 	vaf.va = &args;
64 
65 	if (zone & rsi_zone_enabled)
66 		pr_info("%pV", &vaf);
67 	va_end(args);
68 }
69 EXPORT_SYMBOL_GPL(rsi_dbg);
70 
opmode_str(int oper_mode)71 static char *opmode_str(int oper_mode)
72 {
73 	switch (oper_mode) {
74 	case DEV_OPMODE_WIFI_ALONE:
75 		return "Wi-Fi alone";
76 	case DEV_OPMODE_BT_ALONE:
77 		return "BT EDR alone";
78 	case DEV_OPMODE_BT_LE_ALONE:
79 		return "BT LE alone";
80 	case DEV_OPMODE_BT_DUAL:
81 		return "BT Dual";
82 	case DEV_OPMODE_STA_BT:
83 		return "Wi-Fi STA + BT EDR";
84 	case DEV_OPMODE_STA_BT_LE:
85 		return "Wi-Fi STA + BT LE";
86 	case DEV_OPMODE_STA_BT_DUAL:
87 		return "Wi-Fi STA + BT DUAL";
88 	case DEV_OPMODE_AP_BT:
89 		return "Wi-Fi AP + BT EDR";
90 	case DEV_OPMODE_AP_BT_DUAL:
91 		return "Wi-Fi AP + BT DUAL";
92 	}
93 
94 	return "Unknown";
95 }
96 
rsi_print_version(struct rsi_common * common)97 void rsi_print_version(struct rsi_common *common)
98 {
99 	rsi_dbg(ERR_ZONE, "================================================\n");
100 	rsi_dbg(ERR_ZONE, "================ RSI Version Info ==============\n");
101 	rsi_dbg(ERR_ZONE, "================================================\n");
102 	rsi_dbg(ERR_ZONE, "FW Version\t: %d.%d.%d\n",
103 		common->lmac_ver.major, common->lmac_ver.minor,
104 		common->lmac_ver.release_num);
105 	rsi_dbg(ERR_ZONE, "Operating mode\t: %d [%s]",
106 		common->oper_mode, opmode_str(common->oper_mode));
107 	rsi_dbg(ERR_ZONE, "Firmware file\t: %s", common->priv->fw_file_name);
108 	rsi_dbg(ERR_ZONE, "================================================\n");
109 }
110 
111 /**
112  * rsi_prepare_skb() - This function prepares the skb.
113  * @common: Pointer to the driver private structure.
114  * @buffer: Pointer to the packet data.
115  * @pkt_len: Length of the packet.
116  * @extended_desc: Extended descriptor.
117  *
118  * Return: Successfully skb.
119  */
rsi_prepare_skb(struct rsi_common * common,u8 * buffer,u32 pkt_len,u8 extended_desc)120 static struct sk_buff *rsi_prepare_skb(struct rsi_common *common,
121 				       u8 *buffer,
122 				       u32 pkt_len,
123 				       u8 extended_desc)
124 {
125 	struct sk_buff *skb = NULL;
126 	u8 payload_offset;
127 
128 	if (WARN(!pkt_len, "%s: Dummy pkt received", __func__))
129 		return NULL;
130 
131 	if (pkt_len > (RSI_RCV_BUFFER_LEN * 4)) {
132 		rsi_dbg(ERR_ZONE, "%s: Pkt size > max rx buf size %d\n",
133 			__func__, pkt_len);
134 		pkt_len = RSI_RCV_BUFFER_LEN * 4;
135 	}
136 
137 	pkt_len -= extended_desc;
138 	skb = dev_alloc_skb(pkt_len + FRAME_DESC_SZ);
139 	if (skb == NULL)
140 		return NULL;
141 
142 	payload_offset = (extended_desc + FRAME_DESC_SZ);
143 	skb_put(skb, pkt_len);
144 	memcpy((skb->data), (buffer + payload_offset), skb->len);
145 
146 	return skb;
147 }
148 
149 /**
150  * rsi_read_pkt() - This function reads frames from the card.
151  * @common: Pointer to the driver private structure.
152  * @rx_pkt: Received pkt.
153  * @rcv_pkt_len: Received pkt length. In case of USB it is 0.
154  *
155  * Return: 0 on success, -1 on failure.
156  */
rsi_read_pkt(struct rsi_common * common,u8 * rx_pkt,s32 rcv_pkt_len)157 int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
158 {
159 	u8 *frame_desc = NULL, extended_desc = 0;
160 	u32 index, length = 0, queueno = 0;
161 	u16 actual_length = 0, offset;
162 	struct sk_buff *skb = NULL;
163 #ifdef CONFIG_RSI_COEX
164 	u8 bt_pkt_type;
165 #endif
166 
167 	index = 0;
168 	do {
169 		frame_desc = &rx_pkt[index];
170 		actual_length = *(u16 *)&frame_desc[0];
171 		offset = *(u16 *)&frame_desc[2];
172 		if (!rcv_pkt_len && offset >
173 			RSI_MAX_RX_USB_PKT_SIZE - FRAME_DESC_SZ)
174 			goto fail;
175 
176 		queueno = rsi_get_queueno(frame_desc, offset);
177 		length = rsi_get_length(frame_desc, offset);
178 
179 		/* Extended descriptor is valid for WLAN queues only */
180 		if (queueno == RSI_WIFI_DATA_Q || queueno == RSI_WIFI_MGMT_Q)
181 			extended_desc = rsi_get_extended_desc(frame_desc,
182 							      offset);
183 
184 		switch (queueno) {
185 		case RSI_COEX_Q:
186 #ifdef CONFIG_RSI_COEX
187 			if (common->coex_mode > 1)
188 				rsi_coex_recv_pkt(common, frame_desc + offset);
189 			else
190 #endif
191 				rsi_mgmt_pkt_recv(common,
192 						  (frame_desc + offset));
193 			break;
194 
195 		case RSI_WIFI_DATA_Q:
196 			skb = rsi_prepare_skb(common,
197 					      (frame_desc + offset),
198 					      length,
199 					      extended_desc);
200 			if (skb == NULL)
201 				goto fail;
202 
203 			rsi_indicate_pkt_to_os(common, skb);
204 			break;
205 
206 		case RSI_WIFI_MGMT_Q:
207 			rsi_mgmt_pkt_recv(common, (frame_desc + offset));
208 			break;
209 
210 #ifdef CONFIG_RSI_COEX
211 		case RSI_BT_MGMT_Q:
212 		case RSI_BT_DATA_Q:
213 #define BT_RX_PKT_TYPE_OFST	14
214 #define BT_CARD_READY_IND	0x89
215 			bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST];
216 			if (bt_pkt_type == BT_CARD_READY_IND) {
217 				rsi_dbg(INFO_ZONE, "BT Card ready recvd\n");
218 				if (common->fsm_state == FSM_MAC_INIT_DONE)
219 					rsi_attach_bt(common);
220 				else
221 					common->bt_defer_attach = true;
222 			} else {
223 				if (common->bt_adapter)
224 					rsi_bt_ops.recv_pkt(common->bt_adapter,
225 							frame_desc + offset);
226 			}
227 			break;
228 #endif
229 
230 		default:
231 			rsi_dbg(ERR_ZONE, "%s: pkt from invalid queue: %d\n",
232 				__func__,   queueno);
233 			goto fail;
234 		}
235 
236 		index  += actual_length;
237 		rcv_pkt_len -= actual_length;
238 	} while (rcv_pkt_len > 0);
239 
240 	return 0;
241 fail:
242 	return -EINVAL;
243 }
244 EXPORT_SYMBOL_GPL(rsi_read_pkt);
245 
246 /**
247  * rsi_tx_scheduler_thread() - This function is a kernel thread to send the
248  *			       packets to the device.
249  * @common: Pointer to the driver private structure.
250  *
251  * Return: None.
252  */
rsi_tx_scheduler_thread(struct rsi_common * common)253 static void rsi_tx_scheduler_thread(struct rsi_common *common)
254 {
255 	struct rsi_hw *adapter = common->priv;
256 	u32 timeout = EVENT_WAIT_FOREVER;
257 
258 	do {
259 		if (adapter->determine_event_timeout)
260 			timeout = adapter->determine_event_timeout(adapter);
261 		rsi_wait_event(&common->tx_thread.event, timeout);
262 		rsi_reset_event(&common->tx_thread.event);
263 
264 		if (common->init_done)
265 			rsi_core_qos_processor(common);
266 	} while (atomic_read(&common->tx_thread.thread_done) == 0);
267 	kthread_complete_and_exit(&common->tx_thread.completion, 0);
268 }
269 
270 #ifdef CONFIG_RSI_COEX
rsi_get_host_intf(void * priv)271 enum rsi_host_intf rsi_get_host_intf(void *priv)
272 {
273 	struct rsi_common *common = priv;
274 
275 	return common->priv->rsi_host_intf;
276 }
277 
rsi_set_bt_context(void * priv,void * bt_context)278 void rsi_set_bt_context(void *priv, void *bt_context)
279 {
280 	struct rsi_common *common = priv;
281 
282 	common->bt_adapter = bt_context;
283 }
284 #endif
285 
rsi_attach_bt(struct rsi_common * common)286 void rsi_attach_bt(struct rsi_common *common)
287 {
288 #ifdef CONFIG_RSI_COEX
289 	if (rsi_bt_ops.attach(common, &g_proto_ops))
290 		rsi_dbg(ERR_ZONE,
291 			"Failed to attach BT module\n");
292 #endif
293 }
294 
295 /**
296  * rsi_91x_init() - This function initializes os interface operations.
297  * @oper_mode: One of DEV_OPMODE_*.
298  *
299  * Return: Pointer to the adapter structure on success, NULL on failure .
300  */
rsi_91x_init(u16 oper_mode)301 struct rsi_hw *rsi_91x_init(u16 oper_mode)
302 {
303 	struct rsi_hw *adapter = NULL;
304 	struct rsi_common *common = NULL;
305 	u8 ii = 0;
306 
307 	adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
308 	if (!adapter)
309 		return NULL;
310 
311 	adapter->priv = kzalloc(sizeof(*common), GFP_KERNEL);
312 	if (adapter->priv == NULL) {
313 		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of memory\n",
314 			__func__);
315 		kfree(adapter);
316 		return NULL;
317 	} else {
318 		common = adapter->priv;
319 		common->priv = adapter;
320 	}
321 
322 	for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
323 		skb_queue_head_init(&common->tx_queue[ii]);
324 
325 	rsi_init_event(&common->tx_thread.event);
326 	mutex_init(&common->mutex);
327 	mutex_init(&common->tx_lock);
328 	mutex_init(&common->rx_lock);
329 	mutex_init(&common->tx_bus_mutex);
330 
331 	if (rsi_create_kthread(common,
332 			       &common->tx_thread,
333 			       rsi_tx_scheduler_thread,
334 			       "Tx-Thread")) {
335 		rsi_dbg(ERR_ZONE, "%s: Unable to init tx thrd\n", __func__);
336 		goto err;
337 	}
338 
339 	rsi_default_ps_params(adapter);
340 	init_bgscan_params(common);
341 	spin_lock_init(&adapter->ps_lock);
342 	timer_setup(&common->roc_timer, rsi_roc_timeout, 0);
343 	init_completion(&common->wlan_init_completion);
344 	adapter->device_model = RSI_DEV_9113;
345 	common->oper_mode = oper_mode;
346 
347 	/* Determine coex mode */
348 	switch (common->oper_mode) {
349 	case DEV_OPMODE_STA_BT_DUAL:
350 	case DEV_OPMODE_STA_BT:
351 	case DEV_OPMODE_STA_BT_LE:
352 	case DEV_OPMODE_BT_ALONE:
353 	case DEV_OPMODE_BT_LE_ALONE:
354 	case DEV_OPMODE_BT_DUAL:
355 		common->coex_mode = 2;
356 		break;
357 	case DEV_OPMODE_AP_BT_DUAL:
358 	case DEV_OPMODE_AP_BT:
359 		common->coex_mode = 4;
360 		break;
361 	case DEV_OPMODE_WIFI_ALONE:
362 		common->coex_mode = 1;
363 		break;
364 	default:
365 		common->oper_mode = 1;
366 		common->coex_mode = 1;
367 	}
368 	rsi_dbg(INFO_ZONE, "%s: oper_mode = %d, coex_mode = %d\n",
369 		__func__, common->oper_mode, common->coex_mode);
370 
371 	adapter->device_model = RSI_DEV_9113;
372 #ifdef CONFIG_RSI_COEX
373 	if (common->coex_mode > 1) {
374 		if (rsi_coex_attach(common)) {
375 			rsi_dbg(ERR_ZONE, "Failed to init coex module\n");
376 			rsi_kill_thread(&common->tx_thread);
377 			goto err;
378 		}
379 	}
380 #endif
381 
382 	common->init_done = true;
383 	return adapter;
384 
385 err:
386 	kfree(common);
387 	kfree(adapter);
388 	return NULL;
389 }
390 EXPORT_SYMBOL_GPL(rsi_91x_init);
391 
392 /**
393  * rsi_91x_deinit() - This function de-intializes os intf operations.
394  * @adapter: Pointer to the adapter structure.
395  *
396  * Return: None.
397  */
rsi_91x_deinit(struct rsi_hw * adapter)398 void rsi_91x_deinit(struct rsi_hw *adapter)
399 {
400 	struct rsi_common *common = adapter->priv;
401 	u8 ii;
402 
403 	rsi_dbg(INFO_ZONE, "%s: Performing deinit os ops\n", __func__);
404 
405 	rsi_kill_thread(&common->tx_thread);
406 
407 	for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
408 		skb_queue_purge(&common->tx_queue[ii]);
409 
410 #ifdef CONFIG_RSI_COEX
411 	if (common->coex_mode > 1) {
412 		if (common->bt_adapter) {
413 			rsi_bt_ops.detach(common->bt_adapter);
414 			common->bt_adapter = NULL;
415 		}
416 		rsi_coex_detach(common);
417 	}
418 #endif
419 
420 	common->init_done = false;
421 
422 	kfree(common);
423 	kfree(adapter->rsi_dev);
424 	kfree(adapter);
425 }
426 EXPORT_SYMBOL_GPL(rsi_91x_deinit);
427 
428 /**
429  * rsi_91x_hal_module_init() - This function is invoked when the module is
430  *			       loaded into the kernel.
431  *			       It registers the client driver.
432  * @void: Void.
433  *
434  * Return: 0 on success, -1 on failure.
435  */
rsi_91x_hal_module_init(void)436 static int rsi_91x_hal_module_init(void)
437 {
438 	rsi_dbg(INIT_ZONE, "%s: Module init called\n", __func__);
439 	return 0;
440 }
441 
442 /**
443  * rsi_91x_hal_module_exit() - This function is called at the time of
444  *			       removing/unloading the module.
445  *			       It unregisters the client driver.
446  * @void: Void.
447  *
448  * Return: None.
449  */
rsi_91x_hal_module_exit(void)450 static void rsi_91x_hal_module_exit(void)
451 {
452 	rsi_dbg(INIT_ZONE, "%s: Module exit called\n", __func__);
453 }
454 
455 module_init(rsi_91x_hal_module_init);
456 module_exit(rsi_91x_hal_module_exit);
457 MODULE_AUTHOR("Redpine Signals Inc");
458 MODULE_DESCRIPTION("Station driver for RSI 91x devices");
459 MODULE_VERSION("0.1");
460 MODULE_LICENSE("Dual BSD/GPL");
461