1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * isppreview.c
4  *
5  * TI OMAP3 ISP driver - Preview module
6  *
7  * Copyright (C) 2010 Nokia Corporation
8  * Copyright (C) 2009 Texas Instruments, Inc.
9  *
10  * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
11  *	     Sakari Ailus <sakari.ailus@iki.fi>
12  */
13 
14 #include <linux/device.h>
15 #include <linux/mm.h>
16 #include <linux/module.h>
17 #include <linux/mutex.h>
18 #include <linux/uaccess.h>
19 
20 #include "isp.h"
21 #include "ispreg.h"
22 #include "isppreview.h"
23 
24 /* Default values in Office Fluorescent Light for RGBtoRGB Blending */
25 static const struct omap3isp_prev_rgbtorgb flr_rgb2rgb = {
26 	{	/* RGB-RGB Matrix */
27 		{0x01E2, 0x0F30, 0x0FEE},
28 		{0x0F9B, 0x01AC, 0x0FB9},
29 		{0x0FE0, 0x0EC0, 0x0260}
30 	},	/* RGB Offset */
31 	{0x0000, 0x0000, 0x0000}
32 };
33 
34 /* Default values in Office Fluorescent Light for RGB to YUV Conversion*/
35 static const struct omap3isp_prev_csc flr_prev_csc = {
36 	{	/* CSC Coef Matrix */
37 		{66, 129, 25},
38 		{-38, -75, 112},
39 		{112, -94 , -18}
40 	},	/* CSC Offset */
41 	{0x0, 0x0, 0x0}
42 };
43 
44 /* Default values in Office Fluorescent Light for CFA Gradient*/
45 #define FLR_CFA_GRADTHRS_HORZ	0x28
46 #define FLR_CFA_GRADTHRS_VERT	0x28
47 
48 /* Default values in Office Fluorescent Light for Chroma Suppression*/
49 #define FLR_CSUP_GAIN		0x0D
50 #define FLR_CSUP_THRES		0xEB
51 
52 /* Default values in Office Fluorescent Light for Noise Filter*/
53 #define FLR_NF_STRGTH		0x03
54 
55 /* Default values for White Balance */
56 #define FLR_WBAL_DGAIN		0x100
57 #define FLR_WBAL_COEF		0x20
58 
59 /* Default values in Office Fluorescent Light for Black Adjustment*/
60 #define FLR_BLKADJ_BLUE		0x0
61 #define FLR_BLKADJ_GREEN	0x0
62 #define FLR_BLKADJ_RED		0x0
63 
64 #define DEF_DETECT_CORRECT_VAL	0xe
65 
66 /*
67  * Margins and image size limits.
68  *
69  * The preview engine crops several rows and columns internally depending on
70  * which filters are enabled. To avoid format changes when the filters are
71  * enabled or disabled (which would prevent them from being turned on or off
72  * during streaming), the driver assumes all filters that can be configured
73  * during streaming are enabled when computing sink crop and source format
74  * limits.
75  *
76  * If a filter is disabled, additional cropping is automatically added at the
77  * preview engine input by the driver to avoid overflow at line and frame end.
78  * This is completely transparent for applications.
79  *
80  * Median filter		4 pixels
81  * Noise filter,
82  * Faulty pixels correction	4 pixels, 4 lines
83  * Color suppression		2 pixels
84  * or luma enhancement
85  * -------------------------------------------------------------
86  * Maximum total		10 pixels, 4 lines
87  *
88  * The color suppression and luma enhancement filters are applied after bayer to
89  * YUV conversion. They thus can crop one pixel on the left and one pixel on the
90  * right side of the image without changing the color pattern. When both those
91  * filters are disabled, the driver must crop the two pixels on the same side of
92  * the image to avoid changing the bayer pattern. The left margin is thus set to
93  * 6 pixels and the right margin to 4 pixels.
94  */
95 
96 #define PREV_MARGIN_LEFT	6
97 #define PREV_MARGIN_RIGHT	4
98 #define PREV_MARGIN_TOP		2
99 #define PREV_MARGIN_BOTTOM	2
100 
101 #define PREV_MIN_IN_WIDTH	64
102 #define PREV_MIN_IN_HEIGHT	8
103 #define PREV_MAX_IN_HEIGHT	16384
104 
105 #define PREV_MIN_OUT_WIDTH		0
106 #define PREV_MIN_OUT_HEIGHT		0
107 #define PREV_MAX_OUT_WIDTH_REV_1	1280
108 #define PREV_MAX_OUT_WIDTH_REV_2	3300
109 #define PREV_MAX_OUT_WIDTH_REV_15	4096
110 
111 /*
112  * Coefficient Tables for the submodules in Preview.
113  * Array is initialised with the values from.the tables text file.
114  */
115 
116 /*
117  * CFA Filter Coefficient Table
118  *
119  */
120 static u32 cfa_coef_table[4][OMAP3ISP_PREV_CFA_BLK_SIZE] = {
121 #include "cfa_coef_table.h"
122 };
123 
124 /*
125  * Default Gamma Correction Table - All components
126  */
127 static u32 gamma_table[] = {
128 #include "gamma_table.h"
129 };
130 
131 /*
132  * Noise Filter Threshold table
133  */
134 static u32 noise_filter_table[] = {
135 #include "noise_filter_table.h"
136 };
137 
138 /*
139  * Luminance Enhancement Table
140  */
141 static u32 luma_enhance_table[] = {
142 #include "luma_enhance_table.h"
143 };
144 
145 /*
146  * preview_config_luma_enhancement - Configure the Luminance Enhancement table
147  */
148 static void
preview_config_luma_enhancement(struct isp_prev_device * prev,const struct prev_params * params)149 preview_config_luma_enhancement(struct isp_prev_device *prev,
150 				const struct prev_params *params)
151 {
152 	struct isp_device *isp = to_isp_device(prev);
153 	const struct omap3isp_prev_luma *yt = &params->luma;
154 	unsigned int i;
155 
156 	isp_reg_writel(isp, ISPPRV_YENH_TABLE_ADDR,
157 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
158 	for (i = 0; i < OMAP3ISP_PREV_YENH_TBL_SIZE; i++) {
159 		isp_reg_writel(isp, yt->table[i],
160 			       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
161 	}
162 }
163 
164 /*
165  * preview_enable_luma_enhancement - Enable/disable Luminance Enhancement
166  */
167 static void
preview_enable_luma_enhancement(struct isp_prev_device * prev,bool enable)168 preview_enable_luma_enhancement(struct isp_prev_device *prev, bool enable)
169 {
170 	struct isp_device *isp = to_isp_device(prev);
171 
172 	if (enable)
173 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
174 			    ISPPRV_PCR_YNENHEN);
175 	else
176 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
177 			    ISPPRV_PCR_YNENHEN);
178 }
179 
180 /*
181  * preview_enable_invalaw - Enable/disable Inverse A-Law decompression
182  */
preview_enable_invalaw(struct isp_prev_device * prev,bool enable)183 static void preview_enable_invalaw(struct isp_prev_device *prev, bool enable)
184 {
185 	struct isp_device *isp = to_isp_device(prev);
186 
187 	if (enable)
188 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
189 			    ISPPRV_PCR_INVALAW);
190 	else
191 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
192 			    ISPPRV_PCR_INVALAW);
193 }
194 
195 /*
196  * preview_config_hmed - Configure the Horizontal Median Filter
197  */
preview_config_hmed(struct isp_prev_device * prev,const struct prev_params * params)198 static void preview_config_hmed(struct isp_prev_device *prev,
199 				const struct prev_params *params)
200 {
201 	struct isp_device *isp = to_isp_device(prev);
202 	const struct omap3isp_prev_hmed *hmed = &params->hmed;
203 
204 	isp_reg_writel(isp, (hmed->odddist == 1 ? 0 : ISPPRV_HMED_ODDDIST) |
205 		       (hmed->evendist == 1 ? 0 : ISPPRV_HMED_EVENDIST) |
206 		       (hmed->thres << ISPPRV_HMED_THRESHOLD_SHIFT),
207 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED);
208 }
209 
210 /*
211  * preview_enable_hmed - Enable/disable the Horizontal Median Filter
212  */
preview_enable_hmed(struct isp_prev_device * prev,bool enable)213 static void preview_enable_hmed(struct isp_prev_device *prev, bool enable)
214 {
215 	struct isp_device *isp = to_isp_device(prev);
216 
217 	if (enable)
218 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
219 			    ISPPRV_PCR_HMEDEN);
220 	else
221 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
222 			    ISPPRV_PCR_HMEDEN);
223 }
224 
225 /*
226  * preview_config_cfa - Configure CFA Interpolation for Bayer formats
227  *
228  * The CFA table is organised in four blocks, one per Bayer component. The
229  * hardware expects blocks to follow the Bayer order of the input data, while
230  * the driver stores the table in GRBG order in memory. The blocks need to be
231  * reordered to support non-GRBG Bayer patterns.
232  */
preview_config_cfa(struct isp_prev_device * prev,const struct prev_params * params)233 static void preview_config_cfa(struct isp_prev_device *prev,
234 			       const struct prev_params *params)
235 {
236 	static const unsigned int cfa_coef_order[4][4] = {
237 		{ 0, 1, 2, 3 }, /* GRBG */
238 		{ 1, 0, 3, 2 }, /* RGGB */
239 		{ 2, 3, 0, 1 }, /* BGGR */
240 		{ 3, 2, 1, 0 }, /* GBRG */
241 	};
242 	const unsigned int *order = cfa_coef_order[prev->params.cfa_order];
243 	const struct omap3isp_prev_cfa *cfa = &params->cfa;
244 	struct isp_device *isp = to_isp_device(prev);
245 	unsigned int i;
246 	unsigned int j;
247 
248 	isp_reg_writel(isp,
249 		(cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) |
250 		(cfa->gradthrs_horz << ISPPRV_CFA_GRADTH_HOR_SHIFT),
251 		OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA);
252 
253 	isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR,
254 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
255 
256 	for (i = 0; i < 4; ++i) {
257 		const __u32 *block = cfa->table[order[i]];
258 
259 		for (j = 0; j < OMAP3ISP_PREV_CFA_BLK_SIZE; ++j)
260 			isp_reg_writel(isp, block[j], OMAP3_ISP_IOMEM_PREV,
261 				       ISPPRV_SET_TBL_DATA);
262 	}
263 }
264 
265 /*
266  * preview_config_chroma_suppression - Configure Chroma Suppression
267  */
268 static void
preview_config_chroma_suppression(struct isp_prev_device * prev,const struct prev_params * params)269 preview_config_chroma_suppression(struct isp_prev_device *prev,
270 				  const struct prev_params *params)
271 {
272 	struct isp_device *isp = to_isp_device(prev);
273 	const struct omap3isp_prev_csup *cs = &params->csup;
274 
275 	isp_reg_writel(isp,
276 		       cs->gain | (cs->thres << ISPPRV_CSUP_THRES_SHIFT) |
277 		       (cs->hypf_en << ISPPRV_CSUP_HPYF_SHIFT),
278 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP);
279 }
280 
281 /*
282  * preview_enable_chroma_suppression - Enable/disable Chrominance Suppression
283  */
284 static void
preview_enable_chroma_suppression(struct isp_prev_device * prev,bool enable)285 preview_enable_chroma_suppression(struct isp_prev_device *prev, bool enable)
286 {
287 	struct isp_device *isp = to_isp_device(prev);
288 
289 	if (enable)
290 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
291 			    ISPPRV_PCR_SUPEN);
292 	else
293 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
294 			    ISPPRV_PCR_SUPEN);
295 }
296 
297 /*
298  * preview_config_whitebalance - Configure White Balance parameters
299  *
300  * Coefficient matrix always with default values.
301  */
302 static void
preview_config_whitebalance(struct isp_prev_device * prev,const struct prev_params * params)303 preview_config_whitebalance(struct isp_prev_device *prev,
304 			    const struct prev_params *params)
305 {
306 	struct isp_device *isp = to_isp_device(prev);
307 	const struct omap3isp_prev_wbal *wbal = &params->wbal;
308 	u32 val;
309 
310 	isp_reg_writel(isp, wbal->dgain, OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN);
311 
312 	val = wbal->coef0 << ISPPRV_WBGAIN_COEF0_SHIFT;
313 	val |= wbal->coef1 << ISPPRV_WBGAIN_COEF1_SHIFT;
314 	val |= wbal->coef2 << ISPPRV_WBGAIN_COEF2_SHIFT;
315 	val |= wbal->coef3 << ISPPRV_WBGAIN_COEF3_SHIFT;
316 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN);
317 
318 	isp_reg_writel(isp,
319 		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_0_SHIFT |
320 		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_1_SHIFT |
321 		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_2_SHIFT |
322 		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_3_SHIFT |
323 		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_0_SHIFT |
324 		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_1_SHIFT |
325 		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_2_SHIFT |
326 		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_3_SHIFT |
327 		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_0_SHIFT |
328 		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_1_SHIFT |
329 		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_2_SHIFT |
330 		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_3_SHIFT |
331 		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_0_SHIFT |
332 		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_1_SHIFT |
333 		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_2_SHIFT |
334 		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_3_SHIFT,
335 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL);
336 }
337 
338 /*
339  * preview_config_blkadj - Configure Black Adjustment
340  */
341 static void
preview_config_blkadj(struct isp_prev_device * prev,const struct prev_params * params)342 preview_config_blkadj(struct isp_prev_device *prev,
343 		      const struct prev_params *params)
344 {
345 	struct isp_device *isp = to_isp_device(prev);
346 	const struct omap3isp_prev_blkadj *blkadj = &params->blkadj;
347 
348 	isp_reg_writel(isp, (blkadj->blue << ISPPRV_BLKADJOFF_B_SHIFT) |
349 		       (blkadj->green << ISPPRV_BLKADJOFF_G_SHIFT) |
350 		       (blkadj->red << ISPPRV_BLKADJOFF_R_SHIFT),
351 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF);
352 }
353 
354 /*
355  * preview_config_rgb_blending - Configure RGB-RGB Blending
356  */
357 static void
preview_config_rgb_blending(struct isp_prev_device * prev,const struct prev_params * params)358 preview_config_rgb_blending(struct isp_prev_device *prev,
359 			    const struct prev_params *params)
360 {
361 	struct isp_device *isp = to_isp_device(prev);
362 	const struct omap3isp_prev_rgbtorgb *rgbrgb = &params->rgb2rgb;
363 	u32 val;
364 
365 	val = (rgbrgb->matrix[0][0] & 0xfff) << ISPPRV_RGB_MAT1_MTX_RR_SHIFT;
366 	val |= (rgbrgb->matrix[0][1] & 0xfff) << ISPPRV_RGB_MAT1_MTX_GR_SHIFT;
367 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1);
368 
369 	val = (rgbrgb->matrix[0][2] & 0xfff) << ISPPRV_RGB_MAT2_MTX_BR_SHIFT;
370 	val |= (rgbrgb->matrix[1][0] & 0xfff) << ISPPRV_RGB_MAT2_MTX_RG_SHIFT;
371 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2);
372 
373 	val = (rgbrgb->matrix[1][1] & 0xfff) << ISPPRV_RGB_MAT3_MTX_GG_SHIFT;
374 	val |= (rgbrgb->matrix[1][2] & 0xfff) << ISPPRV_RGB_MAT3_MTX_BG_SHIFT;
375 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3);
376 
377 	val = (rgbrgb->matrix[2][0] & 0xfff) << ISPPRV_RGB_MAT4_MTX_RB_SHIFT;
378 	val |= (rgbrgb->matrix[2][1] & 0xfff) << ISPPRV_RGB_MAT4_MTX_GB_SHIFT;
379 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4);
380 
381 	val = (rgbrgb->matrix[2][2] & 0xfff) << ISPPRV_RGB_MAT5_MTX_BB_SHIFT;
382 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5);
383 
384 	val = (rgbrgb->offset[0] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT;
385 	val |= (rgbrgb->offset[1] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT;
386 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1);
387 
388 	val = (rgbrgb->offset[2] & 0x3ff) << ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT;
389 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2);
390 }
391 
392 /*
393  * preview_config_csc - Configure Color Space Conversion (RGB to YCbYCr)
394  */
395 static void
preview_config_csc(struct isp_prev_device * prev,const struct prev_params * params)396 preview_config_csc(struct isp_prev_device *prev,
397 		   const struct prev_params *params)
398 {
399 	struct isp_device *isp = to_isp_device(prev);
400 	const struct omap3isp_prev_csc *csc = &params->csc;
401 	u32 val;
402 
403 	val = (csc->matrix[0][0] & 0x3ff) << ISPPRV_CSC0_RY_SHIFT;
404 	val |= (csc->matrix[0][1] & 0x3ff) << ISPPRV_CSC0_GY_SHIFT;
405 	val |= (csc->matrix[0][2] & 0x3ff) << ISPPRV_CSC0_BY_SHIFT;
406 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0);
407 
408 	val = (csc->matrix[1][0] & 0x3ff) << ISPPRV_CSC1_RCB_SHIFT;
409 	val |= (csc->matrix[1][1] & 0x3ff) << ISPPRV_CSC1_GCB_SHIFT;
410 	val |= (csc->matrix[1][2] & 0x3ff) << ISPPRV_CSC1_BCB_SHIFT;
411 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1);
412 
413 	val = (csc->matrix[2][0] & 0x3ff) << ISPPRV_CSC2_RCR_SHIFT;
414 	val |= (csc->matrix[2][1] & 0x3ff) << ISPPRV_CSC2_GCR_SHIFT;
415 	val |= (csc->matrix[2][2] & 0x3ff) << ISPPRV_CSC2_BCR_SHIFT;
416 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2);
417 
418 	val = (csc->offset[0] & 0xff) << ISPPRV_CSC_OFFSET_Y_SHIFT;
419 	val |= (csc->offset[1] & 0xff) << ISPPRV_CSC_OFFSET_CB_SHIFT;
420 	val |= (csc->offset[2] & 0xff) << ISPPRV_CSC_OFFSET_CR_SHIFT;
421 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET);
422 }
423 
424 /*
425  * preview_config_yc_range - Configure the max and min Y and C values
426  */
427 static void
preview_config_yc_range(struct isp_prev_device * prev,const struct prev_params * params)428 preview_config_yc_range(struct isp_prev_device *prev,
429 			const struct prev_params *params)
430 {
431 	struct isp_device *isp = to_isp_device(prev);
432 	const struct omap3isp_prev_yclimit *yc = &params->yclimit;
433 
434 	isp_reg_writel(isp,
435 		       yc->maxC << ISPPRV_SETUP_YC_MAXC_SHIFT |
436 		       yc->maxY << ISPPRV_SETUP_YC_MAXY_SHIFT |
437 		       yc->minC << ISPPRV_SETUP_YC_MINC_SHIFT |
438 		       yc->minY << ISPPRV_SETUP_YC_MINY_SHIFT,
439 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC);
440 }
441 
442 /*
443  * preview_config_dcor - Configure Couplet Defect Correction
444  */
445 static void
preview_config_dcor(struct isp_prev_device * prev,const struct prev_params * params)446 preview_config_dcor(struct isp_prev_device *prev,
447 		    const struct prev_params *params)
448 {
449 	struct isp_device *isp = to_isp_device(prev);
450 	const struct omap3isp_prev_dcor *dcor = &params->dcor;
451 
452 	isp_reg_writel(isp, dcor->detect_correct[0],
453 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0);
454 	isp_reg_writel(isp, dcor->detect_correct[1],
455 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1);
456 	isp_reg_writel(isp, dcor->detect_correct[2],
457 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2);
458 	isp_reg_writel(isp, dcor->detect_correct[3],
459 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3);
460 	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
461 			ISPPRV_PCR_DCCOUP,
462 			dcor->couplet_mode_en ? ISPPRV_PCR_DCCOUP : 0);
463 }
464 
465 /*
466  * preview_enable_dcor - Enable/disable Couplet Defect Correction
467  */
preview_enable_dcor(struct isp_prev_device * prev,bool enable)468 static void preview_enable_dcor(struct isp_prev_device *prev, bool enable)
469 {
470 	struct isp_device *isp = to_isp_device(prev);
471 
472 	if (enable)
473 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
474 			    ISPPRV_PCR_DCOREN);
475 	else
476 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
477 			    ISPPRV_PCR_DCOREN);
478 }
479 
480 /*
481  * preview_enable_drkframe_capture - Enable/disable Dark Frame Capture
482  */
483 static void
preview_enable_drkframe_capture(struct isp_prev_device * prev,bool enable)484 preview_enable_drkframe_capture(struct isp_prev_device *prev, bool enable)
485 {
486 	struct isp_device *isp = to_isp_device(prev);
487 
488 	if (enable)
489 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
490 			    ISPPRV_PCR_DRKFCAP);
491 	else
492 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
493 			    ISPPRV_PCR_DRKFCAP);
494 }
495 
496 /*
497  * preview_enable_drkframe - Enable/disable Dark Frame Subtraction
498  */
preview_enable_drkframe(struct isp_prev_device * prev,bool enable)499 static void preview_enable_drkframe(struct isp_prev_device *prev, bool enable)
500 {
501 	struct isp_device *isp = to_isp_device(prev);
502 
503 	if (enable)
504 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
505 			    ISPPRV_PCR_DRKFEN);
506 	else
507 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
508 			    ISPPRV_PCR_DRKFEN);
509 }
510 
511 /*
512  * preview_config_noisefilter - Configure the Noise Filter
513  */
514 static void
preview_config_noisefilter(struct isp_prev_device * prev,const struct prev_params * params)515 preview_config_noisefilter(struct isp_prev_device *prev,
516 			   const struct prev_params *params)
517 {
518 	struct isp_device *isp = to_isp_device(prev);
519 	const struct omap3isp_prev_nf *nf = &params->nf;
520 	unsigned int i;
521 
522 	isp_reg_writel(isp, nf->spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF);
523 	isp_reg_writel(isp, ISPPRV_NF_TABLE_ADDR,
524 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
525 	for (i = 0; i < OMAP3ISP_PREV_NF_TBL_SIZE; i++) {
526 		isp_reg_writel(isp, nf->table[i],
527 			       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
528 	}
529 }
530 
531 /*
532  * preview_enable_noisefilter - Enable/disable the Noise Filter
533  */
534 static void
preview_enable_noisefilter(struct isp_prev_device * prev,bool enable)535 preview_enable_noisefilter(struct isp_prev_device *prev, bool enable)
536 {
537 	struct isp_device *isp = to_isp_device(prev);
538 
539 	if (enable)
540 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
541 			    ISPPRV_PCR_NFEN);
542 	else
543 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
544 			    ISPPRV_PCR_NFEN);
545 }
546 
547 /*
548  * preview_config_gammacorrn - Configure the Gamma Correction tables
549  */
550 static void
preview_config_gammacorrn(struct isp_prev_device * prev,const struct prev_params * params)551 preview_config_gammacorrn(struct isp_prev_device *prev,
552 			  const struct prev_params *params)
553 {
554 	struct isp_device *isp = to_isp_device(prev);
555 	const struct omap3isp_prev_gtables *gt = &params->gamma;
556 	unsigned int i;
557 
558 	isp_reg_writel(isp, ISPPRV_REDGAMMA_TABLE_ADDR,
559 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
560 	for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
561 		isp_reg_writel(isp, gt->red[i], OMAP3_ISP_IOMEM_PREV,
562 			       ISPPRV_SET_TBL_DATA);
563 
564 	isp_reg_writel(isp, ISPPRV_GREENGAMMA_TABLE_ADDR,
565 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
566 	for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
567 		isp_reg_writel(isp, gt->green[i], OMAP3_ISP_IOMEM_PREV,
568 			       ISPPRV_SET_TBL_DATA);
569 
570 	isp_reg_writel(isp, ISPPRV_BLUEGAMMA_TABLE_ADDR,
571 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
572 	for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
573 		isp_reg_writel(isp, gt->blue[i], OMAP3_ISP_IOMEM_PREV,
574 			       ISPPRV_SET_TBL_DATA);
575 }
576 
577 /*
578  * preview_enable_gammacorrn - Enable/disable Gamma Correction
579  *
580  * When gamma correction is disabled, the module is bypassed and its output is
581  * the 8 MSB of the 10-bit input .
582  */
583 static void
preview_enable_gammacorrn(struct isp_prev_device * prev,bool enable)584 preview_enable_gammacorrn(struct isp_prev_device *prev, bool enable)
585 {
586 	struct isp_device *isp = to_isp_device(prev);
587 
588 	if (enable)
589 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
590 			    ISPPRV_PCR_GAMMA_BYPASS);
591 	else
592 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
593 			    ISPPRV_PCR_GAMMA_BYPASS);
594 }
595 
596 /*
597  * preview_config_contrast - Configure the Contrast
598  *
599  * Value should be programmed before enabling the module.
600  */
601 static void
preview_config_contrast(struct isp_prev_device * prev,const struct prev_params * params)602 preview_config_contrast(struct isp_prev_device *prev,
603 			const struct prev_params *params)
604 {
605 	struct isp_device *isp = to_isp_device(prev);
606 
607 	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
608 			0xff << ISPPRV_CNT_BRT_CNT_SHIFT,
609 			params->contrast << ISPPRV_CNT_BRT_CNT_SHIFT);
610 }
611 
612 /*
613  * preview_config_brightness - Configure the Brightness
614  */
615 static void
preview_config_brightness(struct isp_prev_device * prev,const struct prev_params * params)616 preview_config_brightness(struct isp_prev_device *prev,
617 			  const struct prev_params *params)
618 {
619 	struct isp_device *isp = to_isp_device(prev);
620 
621 	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
622 			0xff << ISPPRV_CNT_BRT_BRT_SHIFT,
623 			params->brightness << ISPPRV_CNT_BRT_BRT_SHIFT);
624 }
625 
626 /*
627  * preview_update_contrast - Updates the contrast.
628  * @contrast: Pointer to hold the current programmed contrast value.
629  *
630  * Value should be programmed before enabling the module.
631  */
632 static void
preview_update_contrast(struct isp_prev_device * prev,u8 contrast)633 preview_update_contrast(struct isp_prev_device *prev, u8 contrast)
634 {
635 	struct prev_params *params;
636 	unsigned long flags;
637 
638 	spin_lock_irqsave(&prev->params.lock, flags);
639 	params = (prev->params.active & OMAP3ISP_PREV_CONTRAST)
640 	       ? &prev->params.params[0] : &prev->params.params[1];
641 
642 	if (params->contrast != (contrast * ISPPRV_CONTRAST_UNITS)) {
643 		params->contrast = contrast * ISPPRV_CONTRAST_UNITS;
644 		params->update |= OMAP3ISP_PREV_CONTRAST;
645 	}
646 	spin_unlock_irqrestore(&prev->params.lock, flags);
647 }
648 
649 /*
650  * preview_update_brightness - Updates the brightness in preview module.
651  * @brightness: Pointer to hold the current programmed brightness value.
652  *
653  */
654 static void
preview_update_brightness(struct isp_prev_device * prev,u8 brightness)655 preview_update_brightness(struct isp_prev_device *prev, u8 brightness)
656 {
657 	struct prev_params *params;
658 	unsigned long flags;
659 
660 	spin_lock_irqsave(&prev->params.lock, flags);
661 	params = (prev->params.active & OMAP3ISP_PREV_BRIGHTNESS)
662 	       ? &prev->params.params[0] : &prev->params.params[1];
663 
664 	if (params->brightness != (brightness * ISPPRV_BRIGHT_UNITS)) {
665 		params->brightness = brightness * ISPPRV_BRIGHT_UNITS;
666 		params->update |= OMAP3ISP_PREV_BRIGHTNESS;
667 	}
668 	spin_unlock_irqrestore(&prev->params.lock, flags);
669 }
670 
671 static u32
preview_params_lock(struct isp_prev_device * prev,u32 update,bool shadow)672 preview_params_lock(struct isp_prev_device *prev, u32 update, bool shadow)
673 {
674 	u32 active = prev->params.active;
675 
676 	if (shadow) {
677 		/* Mark all shadow parameters we are going to touch as busy. */
678 		prev->params.params[0].busy |= ~active & update;
679 		prev->params.params[1].busy |= active & update;
680 	} else {
681 		/* Mark all active parameters we are going to touch as busy. */
682 		update = (prev->params.params[0].update & active)
683 		       | (prev->params.params[1].update & ~active);
684 
685 		prev->params.params[0].busy |= active & update;
686 		prev->params.params[1].busy |= ~active & update;
687 	}
688 
689 	return update;
690 }
691 
692 static void
preview_params_unlock(struct isp_prev_device * prev,u32 update,bool shadow)693 preview_params_unlock(struct isp_prev_device *prev, u32 update, bool shadow)
694 {
695 	u32 active = prev->params.active;
696 
697 	if (shadow) {
698 		/* Set the update flag for shadow parameters that have been
699 		 * updated and clear the busy flag for all shadow parameters.
700 		 */
701 		prev->params.params[0].update |= (~active & update);
702 		prev->params.params[1].update |= (active & update);
703 		prev->params.params[0].busy &= active;
704 		prev->params.params[1].busy &= ~active;
705 	} else {
706 		/* Clear the update flag for active parameters that have been
707 		 * applied and the busy flag for all active parameters.
708 		 */
709 		prev->params.params[0].update &= ~(active & update);
710 		prev->params.params[1].update &= ~(~active & update);
711 		prev->params.params[0].busy &= ~active;
712 		prev->params.params[1].busy &= active;
713 	}
714 }
715 
preview_params_switch(struct isp_prev_device * prev)716 static void preview_params_switch(struct isp_prev_device *prev)
717 {
718 	u32 to_switch;
719 
720 	/* Switch active parameters with updated shadow parameters when the
721 	 * shadow parameter has been updated and neither the active not the
722 	 * shadow parameter is busy.
723 	 */
724 	to_switch = (prev->params.params[0].update & ~prev->params.active)
725 		  | (prev->params.params[1].update & prev->params.active);
726 	to_switch &= ~(prev->params.params[0].busy |
727 		       prev->params.params[1].busy);
728 	if (to_switch == 0)
729 		return;
730 
731 	prev->params.active ^= to_switch;
732 
733 	/* Remove the update flag for the shadow copy of parameters we have
734 	 * switched.
735 	 */
736 	prev->params.params[0].update &= ~(~prev->params.active & to_switch);
737 	prev->params.params[1].update &= ~(prev->params.active & to_switch);
738 }
739 
740 /* preview parameters update structure */
741 struct preview_update {
742 	void (*config)(struct isp_prev_device *, const struct prev_params *);
743 	void (*enable)(struct isp_prev_device *, bool);
744 	unsigned int param_offset;
745 	unsigned int param_size;
746 	unsigned int config_offset;
747 	bool skip;
748 };
749 
750 /* Keep the array indexed by the OMAP3ISP_PREV_* bit number. */
751 static const struct preview_update update_attrs[] = {
752 	/* OMAP3ISP_PREV_LUMAENH */ {
753 		preview_config_luma_enhancement,
754 		preview_enable_luma_enhancement,
755 		offsetof(struct prev_params, luma),
756 		sizeof_field(struct prev_params, luma),
757 		offsetof(struct omap3isp_prev_update_config, luma),
758 	}, /* OMAP3ISP_PREV_INVALAW */ {
759 		NULL,
760 		preview_enable_invalaw,
761 	}, /* OMAP3ISP_PREV_HRZ_MED */ {
762 		preview_config_hmed,
763 		preview_enable_hmed,
764 		offsetof(struct prev_params, hmed),
765 		sizeof_field(struct prev_params, hmed),
766 		offsetof(struct omap3isp_prev_update_config, hmed),
767 	}, /* OMAP3ISP_PREV_CFA */ {
768 		preview_config_cfa,
769 		NULL,
770 		offsetof(struct prev_params, cfa),
771 		sizeof_field(struct prev_params, cfa),
772 		offsetof(struct omap3isp_prev_update_config, cfa),
773 	}, /* OMAP3ISP_PREV_CHROMA_SUPP */ {
774 		preview_config_chroma_suppression,
775 		preview_enable_chroma_suppression,
776 		offsetof(struct prev_params, csup),
777 		sizeof_field(struct prev_params, csup),
778 		offsetof(struct omap3isp_prev_update_config, csup),
779 	}, /* OMAP3ISP_PREV_WB */ {
780 		preview_config_whitebalance,
781 		NULL,
782 		offsetof(struct prev_params, wbal),
783 		sizeof_field(struct prev_params, wbal),
784 		offsetof(struct omap3isp_prev_update_config, wbal),
785 	}, /* OMAP3ISP_PREV_BLKADJ */ {
786 		preview_config_blkadj,
787 		NULL,
788 		offsetof(struct prev_params, blkadj),
789 		sizeof_field(struct prev_params, blkadj),
790 		offsetof(struct omap3isp_prev_update_config, blkadj),
791 	}, /* OMAP3ISP_PREV_RGB2RGB */ {
792 		preview_config_rgb_blending,
793 		NULL,
794 		offsetof(struct prev_params, rgb2rgb),
795 		sizeof_field(struct prev_params, rgb2rgb),
796 		offsetof(struct omap3isp_prev_update_config, rgb2rgb),
797 	}, /* OMAP3ISP_PREV_COLOR_CONV */ {
798 		preview_config_csc,
799 		NULL,
800 		offsetof(struct prev_params, csc),
801 		sizeof_field(struct prev_params, csc),
802 		offsetof(struct omap3isp_prev_update_config, csc),
803 	}, /* OMAP3ISP_PREV_YC_LIMIT */ {
804 		preview_config_yc_range,
805 		NULL,
806 		offsetof(struct prev_params, yclimit),
807 		sizeof_field(struct prev_params, yclimit),
808 		offsetof(struct omap3isp_prev_update_config, yclimit),
809 	}, /* OMAP3ISP_PREV_DEFECT_COR */ {
810 		preview_config_dcor,
811 		preview_enable_dcor,
812 		offsetof(struct prev_params, dcor),
813 		sizeof_field(struct prev_params, dcor),
814 		offsetof(struct omap3isp_prev_update_config, dcor),
815 	}, /* Previously OMAP3ISP_PREV_GAMMABYPASS, not used anymore */ {
816 		NULL,
817 		NULL,
818 	}, /* OMAP3ISP_PREV_DRK_FRM_CAPTURE */ {
819 		NULL,
820 		preview_enable_drkframe_capture,
821 	}, /* OMAP3ISP_PREV_DRK_FRM_SUBTRACT */ {
822 		NULL,
823 		preview_enable_drkframe,
824 	}, /* OMAP3ISP_PREV_LENS_SHADING */ {
825 		NULL,
826 		preview_enable_drkframe,
827 	}, /* OMAP3ISP_PREV_NF */ {
828 		preview_config_noisefilter,
829 		preview_enable_noisefilter,
830 		offsetof(struct prev_params, nf),
831 		sizeof_field(struct prev_params, nf),
832 		offsetof(struct omap3isp_prev_update_config, nf),
833 	}, /* OMAP3ISP_PREV_GAMMA */ {
834 		preview_config_gammacorrn,
835 		preview_enable_gammacorrn,
836 		offsetof(struct prev_params, gamma),
837 		sizeof_field(struct prev_params, gamma),
838 		offsetof(struct omap3isp_prev_update_config, gamma),
839 	}, /* OMAP3ISP_PREV_CONTRAST */ {
840 		preview_config_contrast,
841 		NULL,
842 		0, 0, 0, true,
843 	}, /* OMAP3ISP_PREV_BRIGHTNESS */ {
844 		preview_config_brightness,
845 		NULL,
846 		0, 0, 0, true,
847 	},
848 };
849 
850 /*
851  * preview_config - Copy and update local structure with userspace preview
852  *                  configuration.
853  * @prev: ISP preview engine
854  * @cfg: Configuration
855  *
856  * Return zero if success or -EFAULT if the configuration can't be copied from
857  * userspace.
858  */
preview_config(struct isp_prev_device * prev,struct omap3isp_prev_update_config * cfg)859 static int preview_config(struct isp_prev_device *prev,
860 			  struct omap3isp_prev_update_config *cfg)
861 {
862 	unsigned long flags;
863 	unsigned int i;
864 	int rval = 0;
865 	u32 update;
866 	u32 active;
867 
868 	if (cfg->update == 0)
869 		return 0;
870 
871 	/* Mark the shadow parameters we're going to update as busy. */
872 	spin_lock_irqsave(&prev->params.lock, flags);
873 	preview_params_lock(prev, cfg->update, true);
874 	active = prev->params.active;
875 	spin_unlock_irqrestore(&prev->params.lock, flags);
876 
877 	update = 0;
878 
879 	for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
880 		const struct preview_update *attr = &update_attrs[i];
881 		struct prev_params *params;
882 		unsigned int bit = 1 << i;
883 
884 		if (attr->skip || !(cfg->update & bit))
885 			continue;
886 
887 		params = &prev->params.params[!!(active & bit)];
888 
889 		if (cfg->flag & bit) {
890 			void __user *from = *(void __user **)
891 				((void *)cfg + attr->config_offset);
892 			void *to = (void *)params + attr->param_offset;
893 			size_t size = attr->param_size;
894 
895 			if (to && from && size) {
896 				if (copy_from_user(to, from, size)) {
897 					rval = -EFAULT;
898 					break;
899 				}
900 			}
901 			params->features |= bit;
902 		} else {
903 			params->features &= ~bit;
904 		}
905 
906 		update |= bit;
907 	}
908 
909 	spin_lock_irqsave(&prev->params.lock, flags);
910 	preview_params_unlock(prev, update, true);
911 	preview_params_switch(prev);
912 	spin_unlock_irqrestore(&prev->params.lock, flags);
913 
914 	return rval;
915 }
916 
917 /*
918  * preview_setup_hw - Setup preview registers and/or internal memory
919  * @prev: pointer to preview private structure
920  * @update: Bitmask of parameters to setup
921  * @active: Bitmask of parameters active in set 0
922  * Note: can be called from interrupt context
923  * Return none
924  */
preview_setup_hw(struct isp_prev_device * prev,u32 update,u32 active)925 static void preview_setup_hw(struct isp_prev_device *prev, u32 update,
926 			     u32 active)
927 {
928 	unsigned int i;
929 
930 	if (update == 0)
931 		return;
932 
933 	for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
934 		const struct preview_update *attr = &update_attrs[i];
935 		struct prev_params *params;
936 		unsigned int bit = 1 << i;
937 
938 		if (!(update & bit))
939 			continue;
940 
941 		params = &prev->params.params[!(active & bit)];
942 
943 		if (params->features & bit) {
944 			if (attr->config)
945 				attr->config(prev, params);
946 			if (attr->enable)
947 				attr->enable(prev, true);
948 		} else {
949 			if (attr->enable)
950 				attr->enable(prev, false);
951 		}
952 	}
953 }
954 
955 /*
956  * preview_config_ycpos - Configure byte layout of YUV image.
957  * @prev: pointer to previewer private structure
958  * @pixelcode: pixel code
959  */
preview_config_ycpos(struct isp_prev_device * prev,u32 pixelcode)960 static void preview_config_ycpos(struct isp_prev_device *prev, u32 pixelcode)
961 {
962 	struct isp_device *isp = to_isp_device(prev);
963 	enum preview_ycpos_mode mode;
964 
965 	switch (pixelcode) {
966 	case MEDIA_BUS_FMT_YUYV8_1X16:
967 		mode = YCPOS_CrYCbY;
968 		break;
969 	case MEDIA_BUS_FMT_UYVY8_1X16:
970 		mode = YCPOS_YCrYCb;
971 		break;
972 	default:
973 		return;
974 	}
975 
976 	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
977 			ISPPRV_PCR_YCPOS_CrYCbY,
978 			mode << ISPPRV_PCR_YCPOS_SHIFT);
979 }
980 
981 /*
982  * preview_config_averager - Enable / disable / configure averager
983  * @average: Average value to be configured.
984  */
preview_config_averager(struct isp_prev_device * prev,u8 average)985 static void preview_config_averager(struct isp_prev_device *prev, u8 average)
986 {
987 	struct isp_device *isp = to_isp_device(prev);
988 
989 	isp_reg_writel(isp, ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT |
990 		       ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT |
991 		       average, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE);
992 }
993 
994 
995 /*
996  * preview_config_input_format - Configure the input format
997  * @prev: The preview engine
998  * @info: Sink pad format information
999  *
1000  * Enable and configure CFA interpolation for Bayer formats and disable it for
1001  * greyscale formats.
1002  *
1003  * The CFA table is organised in four blocks, one per Bayer component. The
1004  * hardware expects blocks to follow the Bayer order of the input data, while
1005  * the driver stores the table in GRBG order in memory. The blocks need to be
1006  * reordered to support non-GRBG Bayer patterns.
1007  */
preview_config_input_format(struct isp_prev_device * prev,const struct isp_format_info * info)1008 static void preview_config_input_format(struct isp_prev_device *prev,
1009 					const struct isp_format_info *info)
1010 {
1011 	struct isp_device *isp = to_isp_device(prev);
1012 	struct prev_params *params;
1013 
1014 	if (info->width == 8)
1015 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1016 			    ISPPRV_PCR_WIDTH);
1017 	else
1018 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1019 			    ISPPRV_PCR_WIDTH);
1020 
1021 	switch (info->flavor) {
1022 	case MEDIA_BUS_FMT_SGRBG8_1X8:
1023 		prev->params.cfa_order = 0;
1024 		break;
1025 	case MEDIA_BUS_FMT_SRGGB8_1X8:
1026 		prev->params.cfa_order = 1;
1027 		break;
1028 	case MEDIA_BUS_FMT_SBGGR8_1X8:
1029 		prev->params.cfa_order = 2;
1030 		break;
1031 	case MEDIA_BUS_FMT_SGBRG8_1X8:
1032 		prev->params.cfa_order = 3;
1033 		break;
1034 	default:
1035 		/* Disable CFA for non-Bayer formats. */
1036 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1037 			    ISPPRV_PCR_CFAEN);
1038 		return;
1039 	}
1040 
1041 	isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_CFAEN);
1042 	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1043 			ISPPRV_PCR_CFAFMT_MASK, ISPPRV_PCR_CFAFMT_BAYER);
1044 
1045 	params = (prev->params.active & OMAP3ISP_PREV_CFA)
1046 	       ? &prev->params.params[0] : &prev->params.params[1];
1047 
1048 	preview_config_cfa(prev, params);
1049 }
1050 
1051 /*
1052  * preview_config_input_size - Configure the input frame size
1053  *
1054  * The preview engine crops several rows and columns internally depending on
1055  * which processing blocks are enabled. The driver assumes all those blocks are
1056  * enabled when reporting source pad formats to userspace. If this assumption is
1057  * not true, rows and columns must be manually cropped at the preview engine
1058  * input to avoid overflows at the end of lines and frames.
1059  *
1060  * See the explanation at the PREV_MARGIN_* definitions for more details.
1061  */
preview_config_input_size(struct isp_prev_device * prev,u32 active)1062 static void preview_config_input_size(struct isp_prev_device *prev, u32 active)
1063 {
1064 	const struct v4l2_mbus_framefmt *format = &prev->formats[PREV_PAD_SINK];
1065 	struct isp_device *isp = to_isp_device(prev);
1066 	unsigned int sph = prev->crop.left;
1067 	unsigned int eph = prev->crop.left + prev->crop.width - 1;
1068 	unsigned int slv = prev->crop.top;
1069 	unsigned int elv = prev->crop.top + prev->crop.height - 1;
1070 	u32 features;
1071 
1072 	if (format->code != MEDIA_BUS_FMT_Y8_1X8 &&
1073 	    format->code != MEDIA_BUS_FMT_Y10_1X10) {
1074 		sph -= 2;
1075 		eph += 2;
1076 		slv -= 2;
1077 		elv += 2;
1078 	}
1079 
1080 	features = (prev->params.params[0].features & active)
1081 		 | (prev->params.params[1].features & ~active);
1082 
1083 	if (features & (OMAP3ISP_PREV_DEFECT_COR | OMAP3ISP_PREV_NF)) {
1084 		sph -= 2;
1085 		eph += 2;
1086 		slv -= 2;
1087 		elv += 2;
1088 	}
1089 	if (features & OMAP3ISP_PREV_HRZ_MED) {
1090 		sph -= 2;
1091 		eph += 2;
1092 	}
1093 	if (features & (OMAP3ISP_PREV_CHROMA_SUPP | OMAP3ISP_PREV_LUMAENH))
1094 		sph -= 2;
1095 
1096 	isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph,
1097 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO);
1098 	isp_reg_writel(isp, (slv << ISPPRV_VERT_INFO_SLV_SHIFT) | elv,
1099 		       OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO);
1100 }
1101 
1102 /*
1103  * preview_config_inlineoffset - Configures the Read address line offset.
1104  * @prev: Preview module
1105  * @offset: Line offset
1106  *
1107  * According to the TRM, the line offset must be aligned on a 32 bytes boundary.
1108  * However, a hardware bug requires the memory start address to be aligned on a
1109  * 64 bytes boundary, so the offset probably should be aligned on 64 bytes as
1110  * well.
1111  */
1112 static void
preview_config_inlineoffset(struct isp_prev_device * prev,u32 offset)1113 preview_config_inlineoffset(struct isp_prev_device *prev, u32 offset)
1114 {
1115 	struct isp_device *isp = to_isp_device(prev);
1116 
1117 	isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
1118 		       ISPPRV_RADR_OFFSET);
1119 }
1120 
1121 /*
1122  * preview_set_inaddr - Sets memory address of input frame.
1123  * @addr: 32bit memory address aligned on 32byte boundary.
1124  *
1125  * Configures the memory address from which the input frame is to be read.
1126  */
preview_set_inaddr(struct isp_prev_device * prev,u32 addr)1127 static void preview_set_inaddr(struct isp_prev_device *prev, u32 addr)
1128 {
1129 	struct isp_device *isp = to_isp_device(prev);
1130 
1131 	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_RSDR_ADDR);
1132 }
1133 
1134 /*
1135  * preview_config_outlineoffset - Configures the Write address line offset.
1136  * @offset: Line Offset for the preview output.
1137  *
1138  * The offset must be a multiple of 32 bytes.
1139  */
preview_config_outlineoffset(struct isp_prev_device * prev,u32 offset)1140 static void preview_config_outlineoffset(struct isp_prev_device *prev,
1141 				    u32 offset)
1142 {
1143 	struct isp_device *isp = to_isp_device(prev);
1144 
1145 	isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
1146 		       ISPPRV_WADD_OFFSET);
1147 }
1148 
1149 /*
1150  * preview_set_outaddr - Sets the memory address to store output frame
1151  * @addr: 32bit memory address aligned on 32byte boundary.
1152  *
1153  * Configures the memory address to which the output frame is written.
1154  */
preview_set_outaddr(struct isp_prev_device * prev,u32 addr)1155 static void preview_set_outaddr(struct isp_prev_device *prev, u32 addr)
1156 {
1157 	struct isp_device *isp = to_isp_device(prev);
1158 
1159 	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR);
1160 }
1161 
preview_adjust_bandwidth(struct isp_prev_device * prev)1162 static void preview_adjust_bandwidth(struct isp_prev_device *prev)
1163 {
1164 	struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
1165 	struct isp_device *isp = to_isp_device(prev);
1166 	const struct v4l2_mbus_framefmt *ifmt = &prev->formats[PREV_PAD_SINK];
1167 	unsigned long l3_ick = pipe->l3_ick;
1168 	struct v4l2_fract *timeperframe;
1169 	unsigned int cycles_per_frame;
1170 	unsigned int requests_per_frame;
1171 	unsigned int cycles_per_request;
1172 	unsigned int minimum;
1173 	unsigned int maximum;
1174 	unsigned int value;
1175 
1176 	if (prev->input != PREVIEW_INPUT_MEMORY) {
1177 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
1178 			    ISPSBL_SDR_REQ_PRV_EXP_MASK);
1179 		return;
1180 	}
1181 
1182 	/* Compute the minimum number of cycles per request, based on the
1183 	 * pipeline maximum data rate. This is an absolute lower bound if we
1184 	 * don't want SBL overflows, so round the value up.
1185 	 */
1186 	cycles_per_request = div_u64((u64)l3_ick / 2 * 256 + pipe->max_rate - 1,
1187 				     pipe->max_rate);
1188 	minimum = DIV_ROUND_UP(cycles_per_request, 32);
1189 
1190 	/* Compute the maximum number of cycles per request, based on the
1191 	 * requested frame rate. This is a soft upper bound to achieve a frame
1192 	 * rate equal or higher than the requested value, so round the value
1193 	 * down.
1194 	 */
1195 	timeperframe = &pipe->max_timeperframe;
1196 
1197 	requests_per_frame = DIV_ROUND_UP(ifmt->width * 2, 256) * ifmt->height;
1198 	cycles_per_frame = div_u64((u64)l3_ick * timeperframe->numerator,
1199 				   timeperframe->denominator);
1200 	cycles_per_request = cycles_per_frame / requests_per_frame;
1201 
1202 	maximum = cycles_per_request / 32;
1203 
1204 	value = max(minimum, maximum);
1205 
1206 	dev_dbg(isp->dev, "%s: cycles per request = %u\n", __func__, value);
1207 	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
1208 			ISPSBL_SDR_REQ_PRV_EXP_MASK,
1209 			value << ISPSBL_SDR_REQ_PRV_EXP_SHIFT);
1210 }
1211 
1212 /*
1213  * omap3isp_preview_busy - Gets busy state of preview module.
1214  */
omap3isp_preview_busy(struct isp_prev_device * prev)1215 int omap3isp_preview_busy(struct isp_prev_device *prev)
1216 {
1217 	struct isp_device *isp = to_isp_device(prev);
1218 
1219 	return isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR)
1220 		& ISPPRV_PCR_BUSY;
1221 }
1222 
1223 /*
1224  * omap3isp_preview_restore_context - Restores the values of preview registers
1225  */
omap3isp_preview_restore_context(struct isp_device * isp)1226 void omap3isp_preview_restore_context(struct isp_device *isp)
1227 {
1228 	struct isp_prev_device *prev = &isp->isp_prev;
1229 	const u32 update = OMAP3ISP_PREV_FEATURES_END - 1;
1230 
1231 	prev->params.params[0].update = prev->params.active & update;
1232 	prev->params.params[1].update = ~prev->params.active & update;
1233 
1234 	preview_setup_hw(prev, update, prev->params.active);
1235 
1236 	prev->params.params[0].update = 0;
1237 	prev->params.params[1].update = 0;
1238 }
1239 
1240 /*
1241  * preview_print_status - Dump preview module registers to the kernel log
1242  */
1243 #define PREV_PRINT_REGISTER(isp, name)\
1244 	dev_dbg(isp->dev, "###PRV " #name "=0x%08x\n", \
1245 		isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_##name))
1246 
preview_print_status(struct isp_prev_device * prev)1247 static void preview_print_status(struct isp_prev_device *prev)
1248 {
1249 	struct isp_device *isp = to_isp_device(prev);
1250 
1251 	dev_dbg(isp->dev, "-------------Preview Register dump----------\n");
1252 
1253 	PREV_PRINT_REGISTER(isp, PCR);
1254 	PREV_PRINT_REGISTER(isp, HORZ_INFO);
1255 	PREV_PRINT_REGISTER(isp, VERT_INFO);
1256 	PREV_PRINT_REGISTER(isp, RSDR_ADDR);
1257 	PREV_PRINT_REGISTER(isp, RADR_OFFSET);
1258 	PREV_PRINT_REGISTER(isp, DSDR_ADDR);
1259 	PREV_PRINT_REGISTER(isp, DRKF_OFFSET);
1260 	PREV_PRINT_REGISTER(isp, WSDR_ADDR);
1261 	PREV_PRINT_REGISTER(isp, WADD_OFFSET);
1262 	PREV_PRINT_REGISTER(isp, AVE);
1263 	PREV_PRINT_REGISTER(isp, HMED);
1264 	PREV_PRINT_REGISTER(isp, NF);
1265 	PREV_PRINT_REGISTER(isp, WB_DGAIN);
1266 	PREV_PRINT_REGISTER(isp, WBGAIN);
1267 	PREV_PRINT_REGISTER(isp, WBSEL);
1268 	PREV_PRINT_REGISTER(isp, CFA);
1269 	PREV_PRINT_REGISTER(isp, BLKADJOFF);
1270 	PREV_PRINT_REGISTER(isp, RGB_MAT1);
1271 	PREV_PRINT_REGISTER(isp, RGB_MAT2);
1272 	PREV_PRINT_REGISTER(isp, RGB_MAT3);
1273 	PREV_PRINT_REGISTER(isp, RGB_MAT4);
1274 	PREV_PRINT_REGISTER(isp, RGB_MAT5);
1275 	PREV_PRINT_REGISTER(isp, RGB_OFF1);
1276 	PREV_PRINT_REGISTER(isp, RGB_OFF2);
1277 	PREV_PRINT_REGISTER(isp, CSC0);
1278 	PREV_PRINT_REGISTER(isp, CSC1);
1279 	PREV_PRINT_REGISTER(isp, CSC2);
1280 	PREV_PRINT_REGISTER(isp, CSC_OFFSET);
1281 	PREV_PRINT_REGISTER(isp, CNT_BRT);
1282 	PREV_PRINT_REGISTER(isp, CSUP);
1283 	PREV_PRINT_REGISTER(isp, SETUP_YC);
1284 	PREV_PRINT_REGISTER(isp, SET_TBL_ADDR);
1285 	PREV_PRINT_REGISTER(isp, CDC_THR0);
1286 	PREV_PRINT_REGISTER(isp, CDC_THR1);
1287 	PREV_PRINT_REGISTER(isp, CDC_THR2);
1288 	PREV_PRINT_REGISTER(isp, CDC_THR3);
1289 
1290 	dev_dbg(isp->dev, "--------------------------------------------\n");
1291 }
1292 
1293 /*
1294  * preview_init_params - init image processing parameters.
1295  * @prev: pointer to previewer private structure
1296  */
preview_init_params(struct isp_prev_device * prev)1297 static void preview_init_params(struct isp_prev_device *prev)
1298 {
1299 	struct prev_params *params;
1300 	unsigned int i;
1301 
1302 	spin_lock_init(&prev->params.lock);
1303 
1304 	prev->params.active = ~0;
1305 	prev->params.params[0].busy = 0;
1306 	prev->params.params[0].update = OMAP3ISP_PREV_FEATURES_END - 1;
1307 	prev->params.params[1].busy = 0;
1308 	prev->params.params[1].update = 0;
1309 
1310 	params = &prev->params.params[0];
1311 
1312 	/* Init values */
1313 	params->contrast = ISPPRV_CONTRAST_DEF * ISPPRV_CONTRAST_UNITS;
1314 	params->brightness = ISPPRV_BRIGHT_DEF * ISPPRV_BRIGHT_UNITS;
1315 	params->cfa.format = OMAP3ISP_CFAFMT_BAYER;
1316 	memcpy(params->cfa.table, cfa_coef_table,
1317 	       sizeof(params->cfa.table));
1318 	params->cfa.gradthrs_horz = FLR_CFA_GRADTHRS_HORZ;
1319 	params->cfa.gradthrs_vert = FLR_CFA_GRADTHRS_VERT;
1320 	params->csup.gain = FLR_CSUP_GAIN;
1321 	params->csup.thres = FLR_CSUP_THRES;
1322 	params->csup.hypf_en = 0;
1323 	memcpy(params->luma.table, luma_enhance_table,
1324 	       sizeof(params->luma.table));
1325 	params->nf.spread = FLR_NF_STRGTH;
1326 	memcpy(params->nf.table, noise_filter_table, sizeof(params->nf.table));
1327 	params->dcor.couplet_mode_en = 1;
1328 	for (i = 0; i < OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS; i++)
1329 		params->dcor.detect_correct[i] = DEF_DETECT_CORRECT_VAL;
1330 	memcpy(params->gamma.blue, gamma_table, sizeof(params->gamma.blue));
1331 	memcpy(params->gamma.green, gamma_table, sizeof(params->gamma.green));
1332 	memcpy(params->gamma.red, gamma_table, sizeof(params->gamma.red));
1333 	params->wbal.dgain = FLR_WBAL_DGAIN;
1334 	params->wbal.coef0 = FLR_WBAL_COEF;
1335 	params->wbal.coef1 = FLR_WBAL_COEF;
1336 	params->wbal.coef2 = FLR_WBAL_COEF;
1337 	params->wbal.coef3 = FLR_WBAL_COEF;
1338 	params->blkadj.red = FLR_BLKADJ_RED;
1339 	params->blkadj.green = FLR_BLKADJ_GREEN;
1340 	params->blkadj.blue = FLR_BLKADJ_BLUE;
1341 	params->rgb2rgb = flr_rgb2rgb;
1342 	params->csc = flr_prev_csc;
1343 	params->yclimit.minC = ISPPRV_YC_MIN;
1344 	params->yclimit.maxC = ISPPRV_YC_MAX;
1345 	params->yclimit.minY = ISPPRV_YC_MIN;
1346 	params->yclimit.maxY = ISPPRV_YC_MAX;
1347 
1348 	params->features = OMAP3ISP_PREV_CFA | OMAP3ISP_PREV_DEFECT_COR
1349 			 | OMAP3ISP_PREV_NF | OMAP3ISP_PREV_GAMMA
1350 			 | OMAP3ISP_PREV_BLKADJ | OMAP3ISP_PREV_YC_LIMIT
1351 			 | OMAP3ISP_PREV_RGB2RGB | OMAP3ISP_PREV_COLOR_CONV
1352 			 | OMAP3ISP_PREV_WB | OMAP3ISP_PREV_BRIGHTNESS
1353 			 | OMAP3ISP_PREV_CONTRAST;
1354 }
1355 
1356 /*
1357  * preview_max_out_width - Handle previewer hardware output limitations
1358  * @prev: pointer to previewer private structure
1359  * returns maximum width output for current isp revision
1360  */
preview_max_out_width(struct isp_prev_device * prev)1361 static unsigned int preview_max_out_width(struct isp_prev_device *prev)
1362 {
1363 	struct isp_device *isp = to_isp_device(prev);
1364 
1365 	switch (isp->revision) {
1366 	case ISP_REVISION_1_0:
1367 		return PREV_MAX_OUT_WIDTH_REV_1;
1368 
1369 	case ISP_REVISION_2_0:
1370 	default:
1371 		return PREV_MAX_OUT_WIDTH_REV_2;
1372 
1373 	case ISP_REVISION_15_0:
1374 		return PREV_MAX_OUT_WIDTH_REV_15;
1375 	}
1376 }
1377 
preview_configure(struct isp_prev_device * prev)1378 static void preview_configure(struct isp_prev_device *prev)
1379 {
1380 	struct isp_device *isp = to_isp_device(prev);
1381 	const struct isp_format_info *info;
1382 	struct v4l2_mbus_framefmt *format;
1383 	unsigned long flags;
1384 	u32 update;
1385 	u32 active;
1386 
1387 	spin_lock_irqsave(&prev->params.lock, flags);
1388 	/* Mark all active parameters we are going to touch as busy. */
1389 	update = preview_params_lock(prev, 0, false);
1390 	active = prev->params.active;
1391 	spin_unlock_irqrestore(&prev->params.lock, flags);
1392 
1393 	/* PREV_PAD_SINK */
1394 	format = &prev->formats[PREV_PAD_SINK];
1395 	info = omap3isp_video_format_info(format->code);
1396 
1397 	preview_adjust_bandwidth(prev);
1398 
1399 	preview_config_input_format(prev, info);
1400 	preview_config_input_size(prev, active);
1401 
1402 	if (prev->input == PREVIEW_INPUT_CCDC)
1403 		preview_config_inlineoffset(prev, 0);
1404 	else
1405 		preview_config_inlineoffset(prev, ALIGN(format->width, 0x20) *
1406 					    info->bpp);
1407 
1408 	preview_setup_hw(prev, update, active);
1409 
1410 	/* PREV_PAD_SOURCE */
1411 	format = &prev->formats[PREV_PAD_SOURCE];
1412 
1413 	if (prev->output & PREVIEW_OUTPUT_MEMORY)
1414 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1415 			    ISPPRV_PCR_SDRPORT);
1416 	else
1417 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1418 			    ISPPRV_PCR_SDRPORT);
1419 
1420 	if (prev->output & PREVIEW_OUTPUT_RESIZER)
1421 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1422 			    ISPPRV_PCR_RSZPORT);
1423 	else
1424 		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1425 			    ISPPRV_PCR_RSZPORT);
1426 
1427 	if (prev->output & PREVIEW_OUTPUT_MEMORY)
1428 		preview_config_outlineoffset(prev,
1429 				ALIGN(format->width, 0x10) * 2);
1430 
1431 	preview_config_averager(prev, 0);
1432 	preview_config_ycpos(prev, format->code);
1433 
1434 	spin_lock_irqsave(&prev->params.lock, flags);
1435 	preview_params_unlock(prev, update, false);
1436 	spin_unlock_irqrestore(&prev->params.lock, flags);
1437 }
1438 
1439 /* -----------------------------------------------------------------------------
1440  * Interrupt handling
1441  */
1442 
preview_enable_oneshot(struct isp_prev_device * prev)1443 static void preview_enable_oneshot(struct isp_prev_device *prev)
1444 {
1445 	struct isp_device *isp = to_isp_device(prev);
1446 
1447 	/* The PCR.SOURCE bit is automatically reset to 0 when the PCR.ENABLE
1448 	 * bit is set. As the preview engine is used in single-shot mode, we
1449 	 * need to set PCR.SOURCE before enabling the preview engine.
1450 	 */
1451 	if (prev->input == PREVIEW_INPUT_MEMORY)
1452 		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1453 			    ISPPRV_PCR_SOURCE);
1454 
1455 	isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1456 		    ISPPRV_PCR_EN | ISPPRV_PCR_ONESHOT);
1457 }
1458 
omap3isp_preview_isr_frame_sync(struct isp_prev_device * prev)1459 void omap3isp_preview_isr_frame_sync(struct isp_prev_device *prev)
1460 {
1461 	/*
1462 	 * If ISP_VIDEO_DMAQUEUE_QUEUED is set, DMA queue had an underrun
1463 	 * condition, the module was paused and now we have a buffer queued
1464 	 * on the output again. Restart the pipeline if running in continuous
1465 	 * mode.
1466 	 */
1467 	if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS &&
1468 	    prev->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) {
1469 		preview_enable_oneshot(prev);
1470 		isp_video_dmaqueue_flags_clr(&prev->video_out);
1471 	}
1472 }
1473 
preview_isr_buffer(struct isp_prev_device * prev)1474 static void preview_isr_buffer(struct isp_prev_device *prev)
1475 {
1476 	struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
1477 	struct isp_buffer *buffer;
1478 	int restart = 0;
1479 
1480 	if (prev->output & PREVIEW_OUTPUT_MEMORY) {
1481 		buffer = omap3isp_video_buffer_next(&prev->video_out);
1482 		if (buffer != NULL) {
1483 			preview_set_outaddr(prev, buffer->dma);
1484 			restart = 1;
1485 		}
1486 		pipe->state |= ISP_PIPELINE_IDLE_OUTPUT;
1487 	}
1488 
1489 	if (prev->input == PREVIEW_INPUT_MEMORY) {
1490 		buffer = omap3isp_video_buffer_next(&prev->video_in);
1491 		if (buffer != NULL)
1492 			preview_set_inaddr(prev, buffer->dma);
1493 		pipe->state |= ISP_PIPELINE_IDLE_INPUT;
1494 	}
1495 
1496 	switch (prev->state) {
1497 	case ISP_PIPELINE_STREAM_SINGLESHOT:
1498 		if (isp_pipeline_ready(pipe))
1499 			omap3isp_pipeline_set_stream(pipe,
1500 						ISP_PIPELINE_STREAM_SINGLESHOT);
1501 		break;
1502 
1503 	case ISP_PIPELINE_STREAM_CONTINUOUS:
1504 		/* If an underrun occurs, the video queue operation handler will
1505 		 * restart the preview engine. Otherwise restart it immediately.
1506 		 */
1507 		if (restart)
1508 			preview_enable_oneshot(prev);
1509 		break;
1510 
1511 	case ISP_PIPELINE_STREAM_STOPPED:
1512 	default:
1513 		return;
1514 	}
1515 }
1516 
1517 /*
1518  * omap3isp_preview_isr - ISP preview engine interrupt handler
1519  *
1520  * Manage the preview engine video buffers and configure shadowed registers.
1521  */
omap3isp_preview_isr(struct isp_prev_device * prev)1522 void omap3isp_preview_isr(struct isp_prev_device *prev)
1523 {
1524 	unsigned long flags;
1525 	u32 update;
1526 	u32 active;
1527 
1528 	if (omap3isp_module_sync_is_stopping(&prev->wait, &prev->stopping))
1529 		return;
1530 
1531 	spin_lock_irqsave(&prev->params.lock, flags);
1532 	preview_params_switch(prev);
1533 	update = preview_params_lock(prev, 0, false);
1534 	active = prev->params.active;
1535 	spin_unlock_irqrestore(&prev->params.lock, flags);
1536 
1537 	preview_setup_hw(prev, update, active);
1538 	preview_config_input_size(prev, active);
1539 
1540 	if (prev->input == PREVIEW_INPUT_MEMORY ||
1541 	    prev->output & PREVIEW_OUTPUT_MEMORY)
1542 		preview_isr_buffer(prev);
1543 	else if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS)
1544 		preview_enable_oneshot(prev);
1545 
1546 	spin_lock_irqsave(&prev->params.lock, flags);
1547 	preview_params_unlock(prev, update, false);
1548 	spin_unlock_irqrestore(&prev->params.lock, flags);
1549 }
1550 
1551 /* -----------------------------------------------------------------------------
1552  * ISP video operations
1553  */
1554 
preview_video_queue(struct isp_video * video,struct isp_buffer * buffer)1555 static int preview_video_queue(struct isp_video *video,
1556 			       struct isp_buffer *buffer)
1557 {
1558 	struct isp_prev_device *prev = &video->isp->isp_prev;
1559 
1560 	if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
1561 		preview_set_inaddr(prev, buffer->dma);
1562 
1563 	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
1564 		preview_set_outaddr(prev, buffer->dma);
1565 
1566 	return 0;
1567 }
1568 
1569 static const struct isp_video_operations preview_video_ops = {
1570 	.queue = preview_video_queue,
1571 };
1572 
1573 /* -----------------------------------------------------------------------------
1574  * V4L2 subdev operations
1575  */
1576 
1577 /*
1578  * preview_s_ctrl - Handle set control subdev method
1579  * @ctrl: pointer to v4l2 control structure
1580  */
preview_s_ctrl(struct v4l2_ctrl * ctrl)1581 static int preview_s_ctrl(struct v4l2_ctrl *ctrl)
1582 {
1583 	struct isp_prev_device *prev =
1584 		container_of(ctrl->handler, struct isp_prev_device, ctrls);
1585 
1586 	switch (ctrl->id) {
1587 	case V4L2_CID_BRIGHTNESS:
1588 		preview_update_brightness(prev, ctrl->val);
1589 		break;
1590 	case V4L2_CID_CONTRAST:
1591 		preview_update_contrast(prev, ctrl->val);
1592 		break;
1593 	}
1594 
1595 	return 0;
1596 }
1597 
1598 static const struct v4l2_ctrl_ops preview_ctrl_ops = {
1599 	.s_ctrl = preview_s_ctrl,
1600 };
1601 
1602 /*
1603  * preview_ioctl - Handle preview module private ioctl's
1604  * @sd: pointer to v4l2 subdev structure
1605  * @cmd: configuration command
1606  * @arg: configuration argument
1607  * return -EINVAL or zero on success
1608  */
preview_ioctl(struct v4l2_subdev * sd,unsigned int cmd,void * arg)1609 static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
1610 {
1611 	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1612 
1613 	switch (cmd) {
1614 	case VIDIOC_OMAP3ISP_PRV_CFG:
1615 		return preview_config(prev, arg);
1616 
1617 	default:
1618 		return -ENOIOCTLCMD;
1619 	}
1620 }
1621 
1622 /*
1623  * preview_set_stream - Enable/Disable streaming on preview subdev
1624  * @sd    : pointer to v4l2 subdev structure
1625  * @enable: 1 == Enable, 0 == Disable
1626  * return -EINVAL or zero on success
1627  */
preview_set_stream(struct v4l2_subdev * sd,int enable)1628 static int preview_set_stream(struct v4l2_subdev *sd, int enable)
1629 {
1630 	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1631 	struct isp_video *video_out = &prev->video_out;
1632 	struct isp_device *isp = to_isp_device(prev);
1633 	struct device *dev = to_device(prev);
1634 
1635 	if (prev->state == ISP_PIPELINE_STREAM_STOPPED) {
1636 		if (enable == ISP_PIPELINE_STREAM_STOPPED)
1637 			return 0;
1638 
1639 		omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
1640 		preview_configure(prev);
1641 		atomic_set(&prev->stopping, 0);
1642 		preview_print_status(prev);
1643 	}
1644 
1645 	switch (enable) {
1646 	case ISP_PIPELINE_STREAM_CONTINUOUS:
1647 		if (prev->output & PREVIEW_OUTPUT_MEMORY)
1648 			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
1649 
1650 		if (video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED ||
1651 		    !(prev->output & PREVIEW_OUTPUT_MEMORY))
1652 			preview_enable_oneshot(prev);
1653 
1654 		isp_video_dmaqueue_flags_clr(video_out);
1655 		break;
1656 
1657 	case ISP_PIPELINE_STREAM_SINGLESHOT:
1658 		if (prev->input == PREVIEW_INPUT_MEMORY)
1659 			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
1660 		if (prev->output & PREVIEW_OUTPUT_MEMORY)
1661 			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
1662 
1663 		preview_enable_oneshot(prev);
1664 		break;
1665 
1666 	case ISP_PIPELINE_STREAM_STOPPED:
1667 		if (omap3isp_module_sync_idle(&sd->entity, &prev->wait,
1668 					      &prev->stopping))
1669 			dev_dbg(dev, "%s: stop timeout.\n", sd->name);
1670 		omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
1671 		omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
1672 		omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
1673 		isp_video_dmaqueue_flags_clr(video_out);
1674 		break;
1675 	}
1676 
1677 	prev->state = enable;
1678 	return 0;
1679 }
1680 
1681 static struct v4l2_mbus_framefmt *
__preview_get_format(struct isp_prev_device * prev,struct v4l2_subdev_state * sd_state,unsigned int pad,enum v4l2_subdev_format_whence which)1682 __preview_get_format(struct isp_prev_device *prev,
1683 		     struct v4l2_subdev_state *sd_state,
1684 		     unsigned int pad, enum v4l2_subdev_format_whence which)
1685 {
1686 	if (which == V4L2_SUBDEV_FORMAT_TRY)
1687 		return v4l2_subdev_get_try_format(&prev->subdev, sd_state,
1688 						  pad);
1689 	else
1690 		return &prev->formats[pad];
1691 }
1692 
1693 static struct v4l2_rect *
__preview_get_crop(struct isp_prev_device * prev,struct v4l2_subdev_state * sd_state,enum v4l2_subdev_format_whence which)1694 __preview_get_crop(struct isp_prev_device *prev,
1695 		   struct v4l2_subdev_state *sd_state,
1696 		   enum v4l2_subdev_format_whence which)
1697 {
1698 	if (which == V4L2_SUBDEV_FORMAT_TRY)
1699 		return v4l2_subdev_get_try_crop(&prev->subdev, sd_state,
1700 						PREV_PAD_SINK);
1701 	else
1702 		return &prev->crop;
1703 }
1704 
1705 /* previewer format descriptions */
1706 static const unsigned int preview_input_fmts[] = {
1707 	MEDIA_BUS_FMT_Y8_1X8,
1708 	MEDIA_BUS_FMT_SGRBG8_1X8,
1709 	MEDIA_BUS_FMT_SRGGB8_1X8,
1710 	MEDIA_BUS_FMT_SBGGR8_1X8,
1711 	MEDIA_BUS_FMT_SGBRG8_1X8,
1712 	MEDIA_BUS_FMT_Y10_1X10,
1713 	MEDIA_BUS_FMT_SGRBG10_1X10,
1714 	MEDIA_BUS_FMT_SRGGB10_1X10,
1715 	MEDIA_BUS_FMT_SBGGR10_1X10,
1716 	MEDIA_BUS_FMT_SGBRG10_1X10,
1717 };
1718 
1719 static const unsigned int preview_output_fmts[] = {
1720 	MEDIA_BUS_FMT_UYVY8_1X16,
1721 	MEDIA_BUS_FMT_YUYV8_1X16,
1722 };
1723 
1724 /*
1725  * preview_try_format - Validate a format
1726  * @prev: ISP preview engine
1727  * @cfg: V4L2 subdev pad configuration
1728  * @pad: pad number
1729  * @fmt: format to be validated
1730  * @which: try/active format selector
1731  *
1732  * Validate and adjust the given format for the given pad based on the preview
1733  * engine limits and the format and crop rectangles on other pads.
1734  */
preview_try_format(struct isp_prev_device * prev,struct v4l2_subdev_state * sd_state,unsigned int pad,struct v4l2_mbus_framefmt * fmt,enum v4l2_subdev_format_whence which)1735 static void preview_try_format(struct isp_prev_device *prev,
1736 			       struct v4l2_subdev_state *sd_state,
1737 			       unsigned int pad,
1738 			       struct v4l2_mbus_framefmt *fmt,
1739 			       enum v4l2_subdev_format_whence which)
1740 {
1741 	u32 pixelcode;
1742 	struct v4l2_rect *crop;
1743 	unsigned int i;
1744 
1745 	switch (pad) {
1746 	case PREV_PAD_SINK:
1747 		/* When reading data from the CCDC, the input size has already
1748 		 * been mangled by the CCDC output pad so it can be accepted
1749 		 * as-is.
1750 		 *
1751 		 * When reading data from memory, clamp the requested width and
1752 		 * height. The TRM doesn't specify a minimum input height, make
1753 		 * sure we got enough lines to enable the noise filter and color
1754 		 * filter array interpolation.
1755 		 */
1756 		if (prev->input == PREVIEW_INPUT_MEMORY) {
1757 			fmt->width = clamp_t(u32, fmt->width, PREV_MIN_IN_WIDTH,
1758 					     preview_max_out_width(prev));
1759 			fmt->height = clamp_t(u32, fmt->height,
1760 					      PREV_MIN_IN_HEIGHT,
1761 					      PREV_MAX_IN_HEIGHT);
1762 		}
1763 
1764 		fmt->colorspace = V4L2_COLORSPACE_SRGB;
1765 
1766 		for (i = 0; i < ARRAY_SIZE(preview_input_fmts); i++) {
1767 			if (fmt->code == preview_input_fmts[i])
1768 				break;
1769 		}
1770 
1771 		/* If not found, use SGRBG10 as default */
1772 		if (i >= ARRAY_SIZE(preview_input_fmts))
1773 			fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
1774 		break;
1775 
1776 	case PREV_PAD_SOURCE:
1777 		pixelcode = fmt->code;
1778 		*fmt = *__preview_get_format(prev, sd_state, PREV_PAD_SINK,
1779 					     which);
1780 
1781 		switch (pixelcode) {
1782 		case MEDIA_BUS_FMT_YUYV8_1X16:
1783 		case MEDIA_BUS_FMT_UYVY8_1X16:
1784 			fmt->code = pixelcode;
1785 			break;
1786 
1787 		default:
1788 			fmt->code = MEDIA_BUS_FMT_YUYV8_1X16;
1789 			break;
1790 		}
1791 
1792 		/* The preview module output size is configurable through the
1793 		 * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). This
1794 		 * is not supported yet, hardcode the output size to the crop
1795 		 * rectangle size.
1796 		 */
1797 		crop = __preview_get_crop(prev, sd_state, which);
1798 		fmt->width = crop->width;
1799 		fmt->height = crop->height;
1800 
1801 		fmt->colorspace = V4L2_COLORSPACE_JPEG;
1802 		break;
1803 	}
1804 
1805 	fmt->field = V4L2_FIELD_NONE;
1806 }
1807 
1808 /*
1809  * preview_try_crop - Validate a crop rectangle
1810  * @prev: ISP preview engine
1811  * @sink: format on the sink pad
1812  * @crop: crop rectangle to be validated
1813  *
1814  * The preview engine crops lines and columns for its internal operation,
1815  * depending on which filters are enabled. Enforce minimum crop margins to
1816  * handle that transparently for userspace.
1817  *
1818  * See the explanation at the PREV_MARGIN_* definitions for more details.
1819  */
preview_try_crop(struct isp_prev_device * prev,const struct v4l2_mbus_framefmt * sink,struct v4l2_rect * crop)1820 static void preview_try_crop(struct isp_prev_device *prev,
1821 			     const struct v4l2_mbus_framefmt *sink,
1822 			     struct v4l2_rect *crop)
1823 {
1824 	unsigned int left = PREV_MARGIN_LEFT;
1825 	unsigned int right = sink->width - PREV_MARGIN_RIGHT;
1826 	unsigned int top = PREV_MARGIN_TOP;
1827 	unsigned int bottom = sink->height - PREV_MARGIN_BOTTOM;
1828 
1829 	/* When processing data on-the-fly from the CCDC, at least 2 pixels must
1830 	 * be cropped from the left and right sides of the image. As we don't
1831 	 * know which filters will be enabled, increase the left and right
1832 	 * margins by two.
1833 	 */
1834 	if (prev->input == PREVIEW_INPUT_CCDC) {
1835 		left += 2;
1836 		right -= 2;
1837 	}
1838 
1839 	/* The CFA filter crops 4 lines and 4 columns in Bayer mode, and 2 lines
1840 	 * and no columns in other modes. Increase the margins based on the sink
1841 	 * format.
1842 	 */
1843 	if (sink->code != MEDIA_BUS_FMT_Y8_1X8 &&
1844 	    sink->code != MEDIA_BUS_FMT_Y10_1X10) {
1845 		left += 2;
1846 		right -= 2;
1847 		top += 2;
1848 		bottom -= 2;
1849 	}
1850 
1851 	/* Restrict left/top to even values to keep the Bayer pattern. */
1852 	crop->left &= ~1;
1853 	crop->top &= ~1;
1854 
1855 	crop->left = clamp_t(u32, crop->left, left, right - PREV_MIN_OUT_WIDTH);
1856 	crop->top = clamp_t(u32, crop->top, top, bottom - PREV_MIN_OUT_HEIGHT);
1857 	crop->width = clamp_t(u32, crop->width, PREV_MIN_OUT_WIDTH,
1858 			      right - crop->left);
1859 	crop->height = clamp_t(u32, crop->height, PREV_MIN_OUT_HEIGHT,
1860 			       bottom - crop->top);
1861 }
1862 
1863 /*
1864  * preview_enum_mbus_code - Handle pixel format enumeration
1865  * @sd     : pointer to v4l2 subdev structure
1866  * @cfg: V4L2 subdev pad configuration
1867  * @code   : pointer to v4l2_subdev_mbus_code_enum structure
1868  * return -EINVAL or zero on success
1869  */
preview_enum_mbus_code(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_mbus_code_enum * code)1870 static int preview_enum_mbus_code(struct v4l2_subdev *sd,
1871 				  struct v4l2_subdev_state *sd_state,
1872 				  struct v4l2_subdev_mbus_code_enum *code)
1873 {
1874 	switch (code->pad) {
1875 	case PREV_PAD_SINK:
1876 		if (code->index >= ARRAY_SIZE(preview_input_fmts))
1877 			return -EINVAL;
1878 
1879 		code->code = preview_input_fmts[code->index];
1880 		break;
1881 	case PREV_PAD_SOURCE:
1882 		if (code->index >= ARRAY_SIZE(preview_output_fmts))
1883 			return -EINVAL;
1884 
1885 		code->code = preview_output_fmts[code->index];
1886 		break;
1887 	default:
1888 		return -EINVAL;
1889 	}
1890 
1891 	return 0;
1892 }
1893 
preview_enum_frame_size(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_size_enum * fse)1894 static int preview_enum_frame_size(struct v4l2_subdev *sd,
1895 				   struct v4l2_subdev_state *sd_state,
1896 				   struct v4l2_subdev_frame_size_enum *fse)
1897 {
1898 	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1899 	struct v4l2_mbus_framefmt format;
1900 
1901 	if (fse->index != 0)
1902 		return -EINVAL;
1903 
1904 	format.code = fse->code;
1905 	format.width = 1;
1906 	format.height = 1;
1907 	preview_try_format(prev, sd_state, fse->pad, &format, fse->which);
1908 	fse->min_width = format.width;
1909 	fse->min_height = format.height;
1910 
1911 	if (format.code != fse->code)
1912 		return -EINVAL;
1913 
1914 	format.code = fse->code;
1915 	format.width = -1;
1916 	format.height = -1;
1917 	preview_try_format(prev, sd_state, fse->pad, &format, fse->which);
1918 	fse->max_width = format.width;
1919 	fse->max_height = format.height;
1920 
1921 	return 0;
1922 }
1923 
1924 /*
1925  * preview_get_selection - Retrieve a selection rectangle on a pad
1926  * @sd: ISP preview V4L2 subdevice
1927  * @cfg: V4L2 subdev pad configuration
1928  * @sel: Selection rectangle
1929  *
1930  * The only supported rectangles are the crop rectangles on the sink pad.
1931  *
1932  * Return 0 on success or a negative error code otherwise.
1933  */
preview_get_selection(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_selection * sel)1934 static int preview_get_selection(struct v4l2_subdev *sd,
1935 				 struct v4l2_subdev_state *sd_state,
1936 				 struct v4l2_subdev_selection *sel)
1937 {
1938 	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1939 	struct v4l2_mbus_framefmt *format;
1940 
1941 	if (sel->pad != PREV_PAD_SINK)
1942 		return -EINVAL;
1943 
1944 	switch (sel->target) {
1945 	case V4L2_SEL_TGT_CROP_BOUNDS:
1946 		sel->r.left = 0;
1947 		sel->r.top = 0;
1948 		sel->r.width = INT_MAX;
1949 		sel->r.height = INT_MAX;
1950 
1951 		format = __preview_get_format(prev, sd_state, PREV_PAD_SINK,
1952 					      sel->which);
1953 		preview_try_crop(prev, format, &sel->r);
1954 		break;
1955 
1956 	case V4L2_SEL_TGT_CROP:
1957 		sel->r = *__preview_get_crop(prev, sd_state, sel->which);
1958 		break;
1959 
1960 	default:
1961 		return -EINVAL;
1962 	}
1963 
1964 	return 0;
1965 }
1966 
1967 /*
1968  * preview_set_selection - Set a selection rectangle on a pad
1969  * @sd: ISP preview V4L2 subdevice
1970  * @cfg: V4L2 subdev pad configuration
1971  * @sel: Selection rectangle
1972  *
1973  * The only supported rectangle is the actual crop rectangle on the sink pad.
1974  *
1975  * Return 0 on success or a negative error code otherwise.
1976  */
preview_set_selection(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_selection * sel)1977 static int preview_set_selection(struct v4l2_subdev *sd,
1978 				 struct v4l2_subdev_state *sd_state,
1979 				 struct v4l2_subdev_selection *sel)
1980 {
1981 	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1982 	struct v4l2_mbus_framefmt *format;
1983 
1984 	if (sel->target != V4L2_SEL_TGT_CROP ||
1985 	    sel->pad != PREV_PAD_SINK)
1986 		return -EINVAL;
1987 
1988 	/* The crop rectangle can't be changed while streaming. */
1989 	if (prev->state != ISP_PIPELINE_STREAM_STOPPED)
1990 		return -EBUSY;
1991 
1992 	/* Modifying the crop rectangle always changes the format on the source
1993 	 * pad. If the KEEP_CONFIG flag is set, just return the current crop
1994 	 * rectangle.
1995 	 */
1996 	if (sel->flags & V4L2_SEL_FLAG_KEEP_CONFIG) {
1997 		sel->r = *__preview_get_crop(prev, sd_state, sel->which);
1998 		return 0;
1999 	}
2000 
2001 	format = __preview_get_format(prev, sd_state, PREV_PAD_SINK,
2002 				      sel->which);
2003 	preview_try_crop(prev, format, &sel->r);
2004 	*__preview_get_crop(prev, sd_state, sel->which) = sel->r;
2005 
2006 	/* Update the source format. */
2007 	format = __preview_get_format(prev, sd_state, PREV_PAD_SOURCE,
2008 				      sel->which);
2009 	preview_try_format(prev, sd_state, PREV_PAD_SOURCE, format,
2010 			   sel->which);
2011 
2012 	return 0;
2013 }
2014 
2015 /*
2016  * preview_get_format - Handle get format by pads subdev method
2017  * @sd : pointer to v4l2 subdev structure
2018  * @cfg: V4L2 subdev pad configuration
2019  * @fmt: pointer to v4l2 subdev format structure
2020  * return -EINVAL or zero on success
2021  */
preview_get_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)2022 static int preview_get_format(struct v4l2_subdev *sd,
2023 			      struct v4l2_subdev_state *sd_state,
2024 			      struct v4l2_subdev_format *fmt)
2025 {
2026 	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
2027 	struct v4l2_mbus_framefmt *format;
2028 
2029 	format = __preview_get_format(prev, sd_state, fmt->pad, fmt->which);
2030 	if (format == NULL)
2031 		return -EINVAL;
2032 
2033 	fmt->format = *format;
2034 	return 0;
2035 }
2036 
2037 /*
2038  * preview_set_format - Handle set format by pads subdev method
2039  * @sd : pointer to v4l2 subdev structure
2040  * @cfg: V4L2 subdev pad configuration
2041  * @fmt: pointer to v4l2 subdev format structure
2042  * return -EINVAL or zero on success
2043  */
preview_set_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)2044 static int preview_set_format(struct v4l2_subdev *sd,
2045 			      struct v4l2_subdev_state *sd_state,
2046 			      struct v4l2_subdev_format *fmt)
2047 {
2048 	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
2049 	struct v4l2_mbus_framefmt *format;
2050 	struct v4l2_rect *crop;
2051 
2052 	format = __preview_get_format(prev, sd_state, fmt->pad, fmt->which);
2053 	if (format == NULL)
2054 		return -EINVAL;
2055 
2056 	preview_try_format(prev, sd_state, fmt->pad, &fmt->format, fmt->which);
2057 	*format = fmt->format;
2058 
2059 	/* Propagate the format from sink to source */
2060 	if (fmt->pad == PREV_PAD_SINK) {
2061 		/* Reset the crop rectangle. */
2062 		crop = __preview_get_crop(prev, sd_state, fmt->which);
2063 		crop->left = 0;
2064 		crop->top = 0;
2065 		crop->width = fmt->format.width;
2066 		crop->height = fmt->format.height;
2067 
2068 		preview_try_crop(prev, &fmt->format, crop);
2069 
2070 		/* Update the source format. */
2071 		format = __preview_get_format(prev, sd_state, PREV_PAD_SOURCE,
2072 					      fmt->which);
2073 		preview_try_format(prev, sd_state, PREV_PAD_SOURCE, format,
2074 				   fmt->which);
2075 	}
2076 
2077 	return 0;
2078 }
2079 
2080 /*
2081  * preview_init_formats - Initialize formats on all pads
2082  * @sd: ISP preview V4L2 subdevice
2083  * @fh: V4L2 subdev file handle
2084  *
2085  * Initialize all pad formats with default values. If fh is not NULL, try
2086  * formats are initialized on the file handle. Otherwise active formats are
2087  * initialized on the device.
2088  */
preview_init_formats(struct v4l2_subdev * sd,struct v4l2_subdev_fh * fh)2089 static int preview_init_formats(struct v4l2_subdev *sd,
2090 				struct v4l2_subdev_fh *fh)
2091 {
2092 	struct v4l2_subdev_format format;
2093 
2094 	memset(&format, 0, sizeof(format));
2095 	format.pad = PREV_PAD_SINK;
2096 	format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
2097 	format.format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
2098 	format.format.width = 4096;
2099 	format.format.height = 4096;
2100 	preview_set_format(sd, fh ? fh->state : NULL, &format);
2101 
2102 	return 0;
2103 }
2104 
2105 /* subdev core operations */
2106 static const struct v4l2_subdev_core_ops preview_v4l2_core_ops = {
2107 	.ioctl = preview_ioctl,
2108 };
2109 
2110 /* subdev video operations */
2111 static const struct v4l2_subdev_video_ops preview_v4l2_video_ops = {
2112 	.s_stream = preview_set_stream,
2113 };
2114 
2115 /* subdev pad operations */
2116 static const struct v4l2_subdev_pad_ops preview_v4l2_pad_ops = {
2117 	.enum_mbus_code = preview_enum_mbus_code,
2118 	.enum_frame_size = preview_enum_frame_size,
2119 	.get_fmt = preview_get_format,
2120 	.set_fmt = preview_set_format,
2121 	.get_selection = preview_get_selection,
2122 	.set_selection = preview_set_selection,
2123 };
2124 
2125 /* subdev operations */
2126 static const struct v4l2_subdev_ops preview_v4l2_ops = {
2127 	.core = &preview_v4l2_core_ops,
2128 	.video = &preview_v4l2_video_ops,
2129 	.pad = &preview_v4l2_pad_ops,
2130 };
2131 
2132 /* subdev internal operations */
2133 static const struct v4l2_subdev_internal_ops preview_v4l2_internal_ops = {
2134 	.open = preview_init_formats,
2135 };
2136 
2137 /* -----------------------------------------------------------------------------
2138  * Media entity operations
2139  */
2140 
2141 /*
2142  * preview_link_setup - Setup previewer connections.
2143  * @entity : Pointer to media entity structure
2144  * @local  : Pointer to local pad array
2145  * @remote : Pointer to remote pad array
2146  * @flags  : Link flags
2147  * return -EINVAL or zero on success
2148  */
preview_link_setup(struct media_entity * entity,const struct media_pad * local,const struct media_pad * remote,u32 flags)2149 static int preview_link_setup(struct media_entity *entity,
2150 			      const struct media_pad *local,
2151 			      const struct media_pad *remote, u32 flags)
2152 {
2153 	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
2154 	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
2155 	unsigned int index = local->index;
2156 
2157 	/* FIXME: this is actually a hack! */
2158 	if (is_media_entity_v4l2_subdev(remote->entity))
2159 		index |= 2 << 16;
2160 
2161 	switch (index) {
2162 	case PREV_PAD_SINK:
2163 		/* read from memory */
2164 		if (flags & MEDIA_LNK_FL_ENABLED) {
2165 			if (prev->input == PREVIEW_INPUT_CCDC)
2166 				return -EBUSY;
2167 			prev->input = PREVIEW_INPUT_MEMORY;
2168 		} else {
2169 			if (prev->input == PREVIEW_INPUT_MEMORY)
2170 				prev->input = PREVIEW_INPUT_NONE;
2171 		}
2172 		break;
2173 
2174 	case PREV_PAD_SINK | 2 << 16:
2175 		/* read from ccdc */
2176 		if (flags & MEDIA_LNK_FL_ENABLED) {
2177 			if (prev->input == PREVIEW_INPUT_MEMORY)
2178 				return -EBUSY;
2179 			prev->input = PREVIEW_INPUT_CCDC;
2180 		} else {
2181 			if (prev->input == PREVIEW_INPUT_CCDC)
2182 				prev->input = PREVIEW_INPUT_NONE;
2183 		}
2184 		break;
2185 
2186 	/*
2187 	 * The ISP core doesn't support pipelines with multiple video outputs.
2188 	 * Revisit this when it will be implemented, and return -EBUSY for now.
2189 	 */
2190 
2191 	case PREV_PAD_SOURCE:
2192 		/* write to memory */
2193 		if (flags & MEDIA_LNK_FL_ENABLED) {
2194 			if (prev->output & ~PREVIEW_OUTPUT_MEMORY)
2195 				return -EBUSY;
2196 			prev->output |= PREVIEW_OUTPUT_MEMORY;
2197 		} else {
2198 			prev->output &= ~PREVIEW_OUTPUT_MEMORY;
2199 		}
2200 		break;
2201 
2202 	case PREV_PAD_SOURCE | 2 << 16:
2203 		/* write to resizer */
2204 		if (flags & MEDIA_LNK_FL_ENABLED) {
2205 			if (prev->output & ~PREVIEW_OUTPUT_RESIZER)
2206 				return -EBUSY;
2207 			prev->output |= PREVIEW_OUTPUT_RESIZER;
2208 		} else {
2209 			prev->output &= ~PREVIEW_OUTPUT_RESIZER;
2210 		}
2211 		break;
2212 
2213 	default:
2214 		return -EINVAL;
2215 	}
2216 
2217 	return 0;
2218 }
2219 
2220 /* media operations */
2221 static const struct media_entity_operations preview_media_ops = {
2222 	.link_setup = preview_link_setup,
2223 	.link_validate = v4l2_subdev_link_validate,
2224 };
2225 
omap3isp_preview_unregister_entities(struct isp_prev_device * prev)2226 void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
2227 {
2228 	v4l2_device_unregister_subdev(&prev->subdev);
2229 	omap3isp_video_unregister(&prev->video_in);
2230 	omap3isp_video_unregister(&prev->video_out);
2231 }
2232 
omap3isp_preview_register_entities(struct isp_prev_device * prev,struct v4l2_device * vdev)2233 int omap3isp_preview_register_entities(struct isp_prev_device *prev,
2234 	struct v4l2_device *vdev)
2235 {
2236 	int ret;
2237 
2238 	/* Register the subdev and video nodes. */
2239 	prev->subdev.dev = vdev->mdev->dev;
2240 	ret = v4l2_device_register_subdev(vdev, &prev->subdev);
2241 	if (ret < 0)
2242 		goto error;
2243 
2244 	ret = omap3isp_video_register(&prev->video_in, vdev);
2245 	if (ret < 0)
2246 		goto error;
2247 
2248 	ret = omap3isp_video_register(&prev->video_out, vdev);
2249 	if (ret < 0)
2250 		goto error;
2251 
2252 	return 0;
2253 
2254 error:
2255 	omap3isp_preview_unregister_entities(prev);
2256 	return ret;
2257 }
2258 
2259 /* -----------------------------------------------------------------------------
2260  * ISP previewer initialisation and cleanup
2261  */
2262 
2263 /*
2264  * preview_init_entities - Initialize subdev and media entity.
2265  * @prev : Pointer to preview structure
2266  * return -ENOMEM or zero on success
2267  */
preview_init_entities(struct isp_prev_device * prev)2268 static int preview_init_entities(struct isp_prev_device *prev)
2269 {
2270 	struct v4l2_subdev *sd = &prev->subdev;
2271 	struct media_pad *pads = prev->pads;
2272 	struct media_entity *me = &sd->entity;
2273 	int ret;
2274 
2275 	prev->input = PREVIEW_INPUT_NONE;
2276 
2277 	v4l2_subdev_init(sd, &preview_v4l2_ops);
2278 	sd->internal_ops = &preview_v4l2_internal_ops;
2279 	strscpy(sd->name, "OMAP3 ISP preview", sizeof(sd->name));
2280 	sd->grp_id = 1 << 16;	/* group ID for isp subdevs */
2281 	v4l2_set_subdevdata(sd, prev);
2282 	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
2283 
2284 	v4l2_ctrl_handler_init(&prev->ctrls, 2);
2285 	v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_BRIGHTNESS,
2286 			  ISPPRV_BRIGHT_LOW, ISPPRV_BRIGHT_HIGH,
2287 			  ISPPRV_BRIGHT_STEP, ISPPRV_BRIGHT_DEF);
2288 	v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_CONTRAST,
2289 			  ISPPRV_CONTRAST_LOW, ISPPRV_CONTRAST_HIGH,
2290 			  ISPPRV_CONTRAST_STEP, ISPPRV_CONTRAST_DEF);
2291 	v4l2_ctrl_handler_setup(&prev->ctrls);
2292 	sd->ctrl_handler = &prev->ctrls;
2293 
2294 	pads[PREV_PAD_SINK].flags = MEDIA_PAD_FL_SINK
2295 				    | MEDIA_PAD_FL_MUST_CONNECT;
2296 	pads[PREV_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
2297 
2298 	me->ops = &preview_media_ops;
2299 	ret = media_entity_pads_init(me, PREV_PADS_NUM, pads);
2300 	if (ret < 0)
2301 		goto error_handler_free;
2302 
2303 	preview_init_formats(sd, NULL);
2304 
2305 	/* According to the OMAP34xx TRM, video buffers need to be aligned on a
2306 	 * 32 bytes boundary. However, an undocumented hardware bug requires a
2307 	 * 64 bytes boundary at the preview engine input.
2308 	 */
2309 	prev->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
2310 	prev->video_in.ops = &preview_video_ops;
2311 	prev->video_in.isp = to_isp_device(prev);
2312 	prev->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
2313 	prev->video_in.bpl_alignment = 64;
2314 	prev->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
2315 	prev->video_out.ops = &preview_video_ops;
2316 	prev->video_out.isp = to_isp_device(prev);
2317 	prev->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
2318 	prev->video_out.bpl_alignment = 32;
2319 
2320 	ret = omap3isp_video_init(&prev->video_in, "preview");
2321 	if (ret < 0)
2322 		goto error_video_in;
2323 
2324 	ret = omap3isp_video_init(&prev->video_out, "preview");
2325 	if (ret < 0)
2326 		goto error_video_out;
2327 
2328 	return 0;
2329 
2330 error_video_out:
2331 	omap3isp_video_cleanup(&prev->video_in);
2332 error_video_in:
2333 	media_entity_cleanup(&prev->subdev.entity);
2334 error_handler_free:
2335 	v4l2_ctrl_handler_free(&prev->ctrls);
2336 	return ret;
2337 }
2338 
2339 /*
2340  * omap3isp_preview_init - Previewer initialization.
2341  * @isp : Pointer to ISP device
2342  * return -ENOMEM or zero on success
2343  */
omap3isp_preview_init(struct isp_device * isp)2344 int omap3isp_preview_init(struct isp_device *isp)
2345 {
2346 	struct isp_prev_device *prev = &isp->isp_prev;
2347 
2348 	init_waitqueue_head(&prev->wait);
2349 
2350 	preview_init_params(prev);
2351 
2352 	return preview_init_entities(prev);
2353 }
2354 
omap3isp_preview_cleanup(struct isp_device * isp)2355 void omap3isp_preview_cleanup(struct isp_device *isp)
2356 {
2357 	struct isp_prev_device *prev = &isp->isp_prev;
2358 
2359 	v4l2_ctrl_handler_free(&prev->ctrls);
2360 	omap3isp_video_cleanup(&prev->video_in);
2361 	omap3isp_video_cleanup(&prev->video_out);
2362 	media_entity_cleanup(&prev->subdev.entity);
2363 }
2364